GE AF/AMB-T-42/2022-23 REPAIRS AND MAINTENANCE OF WOODEN FURNITURE AND SOFA SET INCLUDING POLISHING FOR SITE-II, III, IV AND 260SU PATIALA AND AF STATION AMBALA UNDER GE (AF) AMBALA

Amount

BED PLYWOOD TOP FD-246: - M&L for carrying out repair and replacement of the following parts of bed plywood top all as shown in drg and as directed by Engr-in-Charge.

S&F plytop made out of 12mm thick commercial plywood of size 1800x900mm BWR ISI marked IS-303 (Make: National/kitply/green ply) as approved by GE

S&F long rail frame of size 35x90x1980 mm long made out of 1st class HW (Teak)

S&F head board frame made out of 1st class HW with 4mm thick OST plywood (Teak) as per existing shape & size.

S&F foot board frame made out of 1st class HW with 4mm thick OST plywood (Teak) as per existing shape & size.

S&F stiffiner to support made out of 1st class Hard Wood (Teak) of size (40x60x880)mm.

S&F Short rail frame of size 60x60x900 mm made out of 1st class HW (Teak)

S&FLeg of size 60x60x 660mm made out of 1st class H/W (Teak)

S& F Flat iron L shape clamp 35mm x5mm bent to right angle

Apply one coat french polish to bed plywood top to obtain smooth, glossy finish including necessary preparation of surfaces.

CHAIR WOODEN BOTTOM W/O ARM FD-56 (M)/ FD-285: - M&L Removing carefully the existing unserviceable/damaged parts of chair wooden bottom w/o arm and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as directed by Engr-in-charge

S&F of front leg of size 50 x 50 x 445mm high made out of 1st class HW (Teak).

S&F of rear leg of size 40 x 65 x 840mm high made out of 1st class HW (Teak).

S&F of front rail of size 25 x 65 x 415mm long made out of 1st class HW (Teak).

S&F of rear rail of size 25 x 65 x 375mm long made out of 1st class HW (Teak).

S&F of side rail of size 25 x 65 x 400mm long made out of 1st class HW (Teak).

S&F of back stiffner 15 x 50 x 375mm long (slightly curve) made out of 1st class HW (Teak).

S&F of stiffiner of size 20 x 25 x 400mm long made out of 1st class HW (Teak) provided 100mm high from bottom.

S&F in replacement of seat made out of 6mm thick plywood BWR grade ISI marked with 6mm dia preparations to be provide to plywood seat(Make: National/kitply/green ply) as approved by GE

Apply one coat french polish to chair wooden bottom w/o arm to obtain smooth, glossy finish including necessary preparation of surfaces.

CHAIR DINING FD-279 & 288: - M&L Removing carefully the existing unserviceable/damaged parts of chair dinning and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling with suitable size of bamboo pins complete all as shown in drg and as directed by Engr-in-Charge.

S&F of front leg of size 45mm x 45mm x 460mm high made out of 1st class HW (Teak).

S&F of rear leg of size 45mm x 65mm x 890mm high made out of 1st class HW (Teak).

S&F of stiffiner of size 25mm x 19mm x 400mm long made out of 1st class HW (Teak).

S&F of front rail of size 30 x 65 x 400mm long made out of 1st class HW (Teak).

S&F of rear rail of size 30 x 65 x 400mm long made out of 1st class HW (Teak).

S&F of side rail of size 30 x 65 x 380mm long made out of 1st class HW (Teak).

S&F of back stiffner of size 15 x 50 x 390mm long horizontal rest slightly curved U shape made out of 1st class HW (Teak).

S&F plastic rubber shoe white/black best quality as per existing size and shape

Apply one coat french polish to chair dinning to obtain smooth, glossy finish including necessary preparation of surfaces.

CHAIR EASY FD-17 (M) FD-229 : - M&LRemoving carefully the existing unserviceable/damaged parts of chair easy and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling with suitable size bamboo pins complete all as directed by Engr-in-charge

S&F of leg of size 55 x 25 x 535mm high made out of 1st class HW (Teak).

S&F of arms of size 65 x 25 x 610mm long made out of 1st class HW (Teak).

S&F of front rails of size 25 x 70 x 520mm long made out of 1st class HW (Teak).

S&F of side rails of size 25 x 70 x 520mm long made out of 1st class HW (Teak).

S&F of rear rail of size 50 x 25 x 500mm long made out of 1st class HW (Teak).

S&F of back frame of size 55 x 20 mm made out of 1st class HW (Teak).

Apply one coat french polish to chair easy to obtain smooth, glossy finish including necessary preparation of surfaces.

S&F plastic rubber shoe white/black best quality as per existing size and shape

CHAIR WRITING FD-280 & FD-250: - M&L Removing carefully the existing unserviceable/damaged parts of chair writing and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as directed by Engr-in-charge

S&F of front leg of size 55 x 30 x 660mm long made out of 1st class HW (Teak).

S&F of rear leg of size 55 x 30 x 890mm long made out of 1st class HW (Teak).

S&F of arms of size 55 x 19 x 495mm long made out of 1st class HW (Teak).

S&F of rails of size 30 x 65 x 490mm long made out of 1st class HW (Teak).

S&F of stiffiner of size 25x20 x 450mm long made out of 1st class HW (Teak).

S&F of back Stiffiner of size 12 x 50 x 445mm made out of 1st class HW (Teak).

Apply one coat french polish to chair writing to obtain smooth, glossy finish including necessary preparation of surfaces.

S&F plastic rubber shoe white/black best quality as per existing size and shape

TABLE OF SIZE 900 X 600 X 760MM WITH DRAWER FD-283: - M&L for carrying out repair and replacement of the following parts of table 900x600x760mm.Removing carefully the existing unserviceable/damaged parts of table 900x600x760mm and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as directed by Engr-in-charge

S&F of table top made out of 18/19mm thick ply wood BRW grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer all as shown in drg and as directed by Engr-in-Charge.

S&F of leg of size 60 x 30 x 740mm high made out of 1st class HW (Teak).

S&F of long rail of size 20 x 60 x 900mm long made out of 1st class HW (Teak).

S&F of short rail of size 20 x 60 x 600mm long made out of 1st class HW (Teak).

S&F of stiffiner of size 25 x 40x600mm long made out of 1st class HW (Teak).

S&F of drawer as per existing shape & size made out of 1st class HW (Teak).

S&F Chromium plated knob as per existing size and shape.

Apply one coat french polish to table 900x600x760mm (3'x2') with drawer to obtain smooth, glossy finish including necessary preparation of surfaces.

S&F plastic rubber shoe white/black best quality as per existing size and shape

TABLE DINING FOR 6 PERSONS FD-273 : - M&L for carrying out repair and replacement of the following parts of Table dinning 8 pers.Removing carefully the existing unserviceable/damaged parts of Table dinning 8 pers and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as directed by Engr-in-charge

S&F of table top of size 1500x900mm made out of 18/19mm thick ply wood BRW grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer all as shown in drg and as directed by Engr-in-Charge.

S&F of leg of size 40 x 75 x 732mm made out of 1st class HW (Teak)

S&F of long rail 25 x 100 x 1500mm made out of 1st class HW (Teak)

S&F of short rail 25 x 100 x 900mm made out of 1st class HW (Teak)

S&F of triangular bracket (as support) made out of 2nd class HW (Teak) as per required shape & size.

Apply one coat french polish to table dining 6 persons to obtain smooth, glossy finish including necessary preparation of surfaces.

S&F plastic rubber shoe white/black best quality as per existing size and shape

PEG TABLE FD-236 & 277: - M&L for carrying out repair and replacement of the following parts of peg table.Removing carefully the existing unserviceable/damaged parts of peg table and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling of complete all as directed by Engr-in-charge

S&F of table top of size 450x300mm made out of 18/19mm thick ply wood BRW grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer all as shown in drg and as directed by Engr-in-Charge.

S&F of leg of size 30 x 50 x 370mm high made out of 1st class HW (Teak) as per existing size & shape.

S&F of top long rail of size 20 x 40 x 450mm long made out of 1st class HW (Teak).

S&F of top short rail of size 20 x 40 x 300mm long made out of 1st class HW (Teak).

S&F in replacement of stiffiner 2 Nos. on bottom section to connecting legs in short side as per directed by Engr-in-Charge.

Apply one coat french polish to peg table to obtain smooth, glossy finish including necessary preparation of surfaces.

S&F plastic rubber shoe white/black best quality as per existing size and shape

TABLE CENTRE FD-235 & 274: - M&L for carrying out repair and replacement of the following parts of table center.Removing carefully the existing unserviceable/damaged/boken parts of table centre and supply and fix of new parts/ components of required size and shape to match with the existing including re-assembling complete all as shown in drg and directed by Engr-in-charge

S&F of table top of size 900x450mm made out of 18/19mm thick ply wood BRW grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer all as shown in drg and as directed by Engr-in-Charge.

S&F of leg of size 45 x 45mm at top and 30 x 30mm at bottom and 372mm high made out of 1st class HW (Teak).

S&F of long rail of size 40 x 19 x 900mm long made out of 1st class HW (Teak).

S&F of short rail of size 40 x 19 x 450mm long made out of 1st class HW (Teak).

Apply one coat french polish to table centre to obtain smooth, glossy finish including necessary preparation of surfaces.

S&F plastic rubber shoe white/black best quality as per existing size and shape

TABLE OF SIZE 900 X 600 X 760MM WITHOUT DRAWER FD-284: - M&L for carrying out repair and replacement of the following parts of table 900x600x760mm ( 3X2') without drawer.Removing carefully the existing unserviceable/damaged parts of table 900x600x760mm without drawer and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as directed by Engr-in-charge

S&F of table top made out of 18/19mm thick ply wood BRW grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer all as shown in drg and as directed by Engr-in-Charge.

S&F of leg of size 60 x 30 x 740mm high made out of 1st class HW (Teak).

S&F of long rail of size 20 x 60 x 900mm long made out of 1st class HW (Teak).

S&F of short rail of size 20 x 60 x 600mm long made out of 1st class HW (Teak).

S&F of stiffiner of size 25 x 40x 600mm long made out of 1st class HW (Teak).

Apply one coat french polish to table 900x600x760mm (3'x2') without drawer to obtain smooth, glossy finish including necessary preparation of surfaces.

S&F plastic rubber shoe white/black best quality as per existing size and shape

TEAPOY FD-278: - M&L for carrying out repair and replacement of the following parts of teapoy. Removing carefully the existing unserviceable/damaged/broken parts of teapoy and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as directed by Engr-in-charge

S&F of tepoy top of size 600x450mm made out of 18/19mm thick ply wood BRW grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer all as shown in drg and as directed by Engr-in-Charge.

S&F of leg of size60 x 30 x 532mm high made out of 1st class HW (Teak).

S&F of long rail of size 20 x 60 x 600mm long made out of 1st class HW (Teak).

S&F of short rail frame of size 20 x 60 x 450mm long made out of 1st class HW (Teak).

Apply one coat french polish to teapoy to obtain smooth, glossy finish including necessary preparation of surfaces.

S&F plastic rubber shoe white/black best quality as per existing size and shape

TABLE WRITING Fd-275: - M&L for carrying out repair and replacement of the following parts of table writing.Removing carefully the existing unserviceable/damaged/broken parts of table writing and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as directed by Engr-in-charge

S&F of table top of size 1175x600mm made out of 18/19mm thick ply wood BRW grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer all as shown in drg and as directed by Engr-in-Charge.

S&F of leg (35 x 55x732)mm high made out of 1st class HW (Teak).

S&F of top long rail (25x50x790)mm long made out of 1st class HW (Teak).

S&F of top short rail (25 x50x600)mm long made out of 1st class HW (Teak).

S&F of bottom rail (side stiffner) (20x50x355)mm long made out of 1st class HW (Teak).

S&F of foot rest (stiffner) (20x50x1145)mm long made out of 1st class HW (Teak).

S&F of drawer as per existing shape and size

S&F of back of table writing of size (355 x 732)mm made out of 6mm thick BWR grade ply wood.

S&F of door of cupbaord as per existing size & shape made out of 18mm thick prelamianted Particle Board beaded all around with Teak Wood beading

S&F of brass hinges 50mm long.

S&F of chromium plated Knob as per existing size and, shape

Apply one coat french polish to table writing to obtain smooth, glossy finish including necessary preparation of surfaces.

S&F plastic rubber shoe white/black best quality as per existing size and shape

TABLE DRESSING GENTS WITH MIRROR FD-230: - M & L for carrying out repair/replacement of following parts of Table Dressing Gents With Mirror as per drawing after dismantling the old parts complete all as specified

S&F of table top made out of 18/19mm thick ply wood BRW grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer all as shown in drg and as directed by Engr-in-Charge.

Bottom partition using 18/19mm thick block board ISI Marked Make (Action tesa/Archid/Novapan) commercial of size 900 x300mm.

Repair/replacement of drawer complete all as specified & drg.

Mirror 5mm thick of make Atul/Saint-Govin with frame of Teak wood (MP Teak). As per existing size and shape and all as directed by Engr in-charge

Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .

knob CP for drawer as per existing size and shape

MS keyplate as existing size and shape

TABLE DINING 120 x90 CM FD/E6/MAP/II/03: - Removing carefully the existing unserviceable/damaged parts of table dining for 04 persons and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as directed by Engr-in-charge

S&F of table top of size 1200x900mm made out of 18/19mm thick ply wood BRW grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer all as shown in drg and as directed by Engr-in-Charge.

S&F of leg of size 90x45 x750mm heigh made out of 1st class HW (Teak).

S&F of long rail of size (45x90x1200)mm long made out of 1st class HW (Teak).

S&F of short rail of size (45x90x900)mm long made out of 1st class HW (Teak).

S&F stiffner sze 90x25x900m made out of 2nd class hard wood ( teak

S&F of triangular bracket(as support) made out of 2nd class HW (Teak) as per size and shape.

Apply one coat french polish to table dining 3 persons to obtain smooth, glossy finish including necessary preparation of surfaces.

S&F plastic rubber shoe white/black best quality as per existing size and shape

TABLE DINING FOR 8 PERSONS FD-273: - M&L for carrying out repair and replacement of the following parts of Table dinning 8 pers.Removing carefully the existing unserviceable/damaged parts of Table dinning 8 pers and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as directed by Engr-in-charge

S&F of table top of size 1800x900mm made out of 18/19mm thick ply wood BRW grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer all as shown in drg and as directed by Engr-in-Charge.

S&F of leg of size 40 x 75 x 732mm made out of 1st class HW (Teak)

S&F of long rail 25 x 100 x 1800mm made out of 1st class HW (Teak)

S&F of short rail 25 x 100 x 900mm made out of 1st class HW (Teak)

S&F of triangular bracket (as support) made out of 2nd class HW (Teak) as per required shape & size.

Apply one coat french polish to table dining 8 persons to obtain smooth, glossy finish including necessary preparation of surfaces.

S&F plastic rubber shoe white/black best quality as per existing size and shape

SOFA SET 5 SEATED/ 4 SEATED WITH DETACHABLE CUSHION FD-281: M & L for carrying out repair,/replacement of the following parts and supply & fix of new parts as under of Table Dressing Ladies as per drg

S&F of long rails of seat for three seater sofa of size 1590mmx100mmx35mm of 1st class hardwood (teak) duly plained and smoothed with sand paper.

-do- but Side rail of size 575mm x 100mm x 35mm.

All as per Srl Item No. 137 above but long rail of back of size 1590mm x100mm x 35mm.

S&F of long rails of seat for singel seater sofa of size 590mmx100mmx35mm of 1st class hardwood (teak) duly plained and smoothened with sand paper.

-do- but Side rail of size 575mm x 100mm x 35mm.

All as per Srl Item No. 140 above but long rail of back of size 590mm x 100mm x 35mm.

-do- but batten of size 50mm x 20mm.

Applying one coat of french polish sofa after preparation of surface complete to sofa 3 seater

Applying one coat of french polish after sofa preparation of surface complete to sofa single chair.

TABLE BEDSIDE FD-276: - M&L for carrying out repair and replacement of the following parts of table bed side. Removing carefully the existing unserviceable/damaged parts of table bed side and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as directed by Engr-in-charge

S&F of top 18mm thick BWR grade plywood of size 230x450mm fixed with 1mm thick laminated sheet at top

S&F of side 18mm thick BWR grade plywood of size 230x510mm fixed with 1mm thick laminated sheet at top

S&F of shelves 12mm thick BWR grade plywood teak face of size 230x450mm

S&F of backply 6mm thick BWR grade of size 510x450mm

Applying one coat of french polish after preparation of surface complete to table Bedside to obtained smooth, glossy finish including necessary preparation of surface.

CHAIR DINNING CUSHIONED FD/E6/MAP/10 : M&L for carrying out repair,/replacement of the following parts and supply & fix of new parts as under of Chair with Cushion Seat & Back as per drg

S&F of front leg made out of 1st class HW (Teak).

S&F of rear leg made out of 1st class HW (Teak).

S&F of side rail made out of 1st class HW (Teak).

S&F of front rail of size made out of 1st class HW (Teak).

S&F of rear rail of size made out of 1st class HW (Teak).

S&F of stiffener made out of 1st class HW (Teak).

S&F seat made out of high density foam cushion 50mm (Make: Sleepwell/Feather Foam/Cool Foam) thick duly covered with tapestry cloth as sample approved by GE

S&F of rubber shoes best quality as per existing size and shape.

Polishing to chair cushion with french polish to obtain smooth glossy finish.

TABLE DRESSING LADIES FD-251 : M & L for carrying out repair,/replacement of the following parts and supply & fix of new parts as under of Table Dressing Ladies as per drg

S&F of leg of size 45x45x75mm made out of 1st class hard wood (Teak)

S&F of long rail of size 40x25x900mm made out of 1st class hard wood (Teak)

S&F of short rail of size 40x25x380mm made out of 1st class Hard wood (Teak)

S&F of drawer as per existing shape and size

S&F of knob CP as per size & shape

S&F of telescopic channel for drawer as per existing size and shape

S&F of handle CP 75mm

S&F replacement of lod defaced of mirror of size 360x1220mm Make : Mode/Atul/Goldenfish with 1st class hard wood (Teak) frame all around complete as per drawing

Apply of polishing to table dressing with glossy finish by applying one coats of french polish including necessary preparation of surface

RECANNING OF ALL TYPE OF CHAIRS: - M&L for recanning of chairs with plastic cane (oval shape) 2mm wide and border with 3mm wide cane complete as per Godrej patren using (Make: SHAH/PREMIER) brand cane (removing of old broken cane shall be done at BSO yard)

Chair dinning

Chair easy

Chair Writing

Stool dressing CB

SIDE BOARD FD-241: - M&L for carrying out repair and replacement of the following parts of side board.Removing carefully the existing unserviceable/damaged parts of side board and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as directed by Engr-in-charge

Top made out of 18mm thick prelaminated partical board exterior grade, phenyl formoldehyde bonded, flat pressed three layer BWR type-II, Make: Archidlam/Novapan ISI marked fixed with mild screws as per size and shape including 4mm thick teak wood beading all around as directed by Engr-in-Charge.

Side 18mm thick plywood BWR of size 455 x 625mm

Back, 6mm thick plywood BWR of size 1220 x 625mm

Drawers as per drg

Door of size 585 x 835 x 18mm BWR plywood

Shelves of size 455 x 835 x 18mm thick BWR plywood

Leg of size 45x45mm at top 25x25mm at bottom made out of 1st class HW (Teak)

S& F long rail size of 25 x 45 mm made out of 1st class H/W ( Teak)

S& F short rail size of 25 x 45 mm made out of 1st class H/W ( Teak)

(k) Knob, chromium plated

Apply one coat french polish to side board dressing to obtain smooth, glossy finish including necessary preparation of surfaces.

TABLE BEDSIDE FD/E6/MAP/15R: - M&L for carrying out repair and replacement of the following parts of table bed side. Removing carefully the existing unserviceable/damaged parts of table bed side and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as directed by Engr-in-charge

Leg madeout of 18mm MS suare pipe of 18 guage as per existing shape and size duly painted with black enamel paint

Top made out of 18mm thick prelaminated partical board make - Archid/ Novapan/ Action Tesa of size 450mmx450mm including PVC edeging alroung of top

Side made out of 18mm thick prelaminated partical board make - Archid/ Novapan/ Action Tesa of size500mmx450mm

Front Shutter made out of 18mm thick prelaminated partical board make - Archid/ Novapan/ Action Tesa of size 400mmx300mm

Bottom made out of 18mm thick prelaminated partical board make - Archid/ Novapan/ Action Tesa of size 450mmx450mm

back made out of 18mm thick prelaminated partical board make - Archid/ Novapan/ Action Tesa of size600mmx450mm

Drawer as per existing shape and size

Telescopic channel for drawer as per exsiting size and shape

Auto closure hinges as per existing pattern

Handle CP for drawer and shutter

S&F plastic rubber shoe white/black best quality as per existing size and shape

CHAIR WRITING CUSHIONED FD/E6/MAP/12: M&L for carrying out repair,/replacement of the following parts and supply & fix of new parts as under of writing Chair as per drg & as per the direction of Engr-in-charge.

S&F in replacement of 50mm thick high density foam cushion (Make: Sleepwell/Feather Foam/Cool Foam) for seat of size 425x400mm, edges trimmed complete all as shown on drawing duly covered with good quality tapestry cloth as per approved by GE/Eng-in-charge.

S&F in replacement of All as per item No. 202 here-in-above but for back including 6mm thick foam cushion (HD) lining on back side of chair writing all as per drawings and as directed by Engineer-in-Charge.

S&F in replacement of Seat made out of 9mm thick curved ply wood (5 ply) BWR grade ISI marked of size 425x400mm.

S&F in replacement of Back made out of 9mm thick curved ply wood (5 ply) BWR grade ISI marked of size 400x300mm.

S&F in replacement of handle as per existing size and shape (as per sample)

Point welding to various parts as required.

Applying one coats of 1st quality synthetic enamel paint colour OG/Black by spray machine after preparation of surface complete on existing frame work of writing chair complete all as directed by Engr-in-charge.

M&L in replacement of existing old warnout unserviceable cushion 32 density, 100mm thick of 530x560 mm size covered with tapestry cloth not less than Rs. 200/- per R/M as approved by GE. MAKE : SLEEP WELL/COOL FOAM/FEATHER FOAM.

Anil jindal and sons

M/s R.K.Jain

M/S Mahal Enterprises

M/s Pee Jay Enterprises

Janeshwar Dass Narender Kumar Jain

J.D.Builders

M/s Harmans