REPAIR TO PLUMBING WORK AND SANITARY FITTINGS KABUL LINES, FAFA AND OTM ACCOMODATIONS IN THE AREA OF AGE BR-II UNDER GE EAST DELHI CANTT-10

Amount

Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness (below or above ground level), complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, complete all as specified and as directed.

Taking down cement plaster from brick or concrete surfaces including raking out joints, hacking for key and scrubbing down with water, complete all as specified and as directed.

Dismantling floor, hearth or wall ceramic tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in any position, laid, bedded and pointed in any mortar and removing rubbish off the premises, complete all as specified and as directed.

Taking down shutters of any description exceeding 1Sqm and not exceeding 2Sqm each, complete all as specified and as directed.

Dismantling wall & ceiling boards (fibre, insulation etc ) or insulation boards, slabs, blankets any thickness including cover fillets, complete all as specified and as directed.

Taking down steel tubing and connections including cleaning for refixing or removal from site for bore of pipe 15mm, complete all as specified and as directed.

Taking down steel tubing and connections including cleaning for refixing or removal from site for bore of pipe 20mm, complete all as specified and as directed.

Taking down steel tubing and connections including cleaning for refixing or removal from site for bore of pipe 25mm, complete all as specified and as directed.

Dismantling existing water tanks of capacity exc 250 & not exceeding 500 ltrs lowering from its position and removal to store, complete all as specified and as directed.

Dismantling existing water tanks of capacity exc 500 & not exceeding 1000 ltrs lowering from its position and removal to store, complete all as specified and as directed.

Dismantling of cast iron or reinforced concrete drain pipes 75mm to 100mm dia, jointed in cement mortar and taking out of trenches, wall and in shafts or other similar work, complete all as specified and as directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar (Internal dia of pipe 150mm to 200mm dia) complete all as specified and as directed.

PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate, on roof tops as in base to OHT, roof kerbs, benching or similar type of work, complete all as specified and as directed.

Brick work with sub class “B” bricks straight or curved on plan built to any radius built in cement mortar 1:4 in brick walls, complete all as specified and as directed.

18-20mm thick Granite stone slab (table rubbed and polished) in steps, shelves, cooking platform and the like not less than 1Sqm (in one piece), laid over 20mm thick layer of cement mortar 1:3 after rougheniung of existing concrete surface and applying a layer of neat cement slurry @ 3Kg/Sqm including pointing in white cement 1:2 using marble dust with admixture of pigments to match with shade of stone, including moulding of edges, complete all as specified and as directed.

6mm Plywood, grade BWR, type BB, fixed with screws to timber frame work including dismantling boarding, any description, fixed in any position with nails, complete all as specified and as directed.

12mm thick Prelaminated Particle board, interior grade, prelaminated with decorative choice laminations on both faces, fixed to timber frame work Kitchen Cabinet/Cupboard shutters, sides, shelves, top and bottom or in any other position in cup boards, complete all as specified and as directed.

Factory made flush shutter 25mm thick, Solid core construction with Block board and plywood face pannels, commercial type on both sides, complete all as specified and as directed.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail, lock on either side and gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointing together with solvent cement, supplying & fixing of frame at site, complete all as specified and as directed.

Aluminium (die cast) body door closer hydraulically regulated designation No 2 universal type suitable for door shutter of 701 to 851mm in width and of weight between 36 to 60 kg, fixed in repairs, complete all as specified and as directed.

150mm size double action spring, hinge, brass, with phosphor bronze wire spring, bright polished, fixed in repairs, complete all as specified and as directed.

Stainless steel wire cloth, 0.36 mm nominal dia. of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless steel wire staples, complete all as specified and as directed.

Repair to existing steel door and window by welding/replacing hinges/handle or removing the steel door and window shutters from the frame and re-fixing after making serviceable, complete all as specified and as directed.

Repair to existing steel rolling shutters by repairing/welding/oiling/greasing to anchoring rod,springs,side guide channel etc incl dismantling existing steel rolling shutters of any width and refixing after making serviceable after adjusting springs , complete all as specified and as directed.

Anodised aluminium powder coated (any colour-thickness of powder coating not less than 50 micron) door shutters, aluminium sections weighting 0.55Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as floor spring heavy duty ISI mark, six lever mortice lock aluminium powder coated lower bolt 150mm long, aluminium powder coated handle 200mm long 02 Nos in each shutter, complete all as specified and as directed by Engr-in-Charge.

Powder coated three track aluminium (glazed/ gauged) window shutters sliding type incl 3mm thick glass or stainless steel wiremesh, without sash bar aluminium saction weighting 0.55 Kg per mtr including necessary joining cleats, glazing clips, rubber packing, anodised aluminium beading , sliding channel,roller screws including fittings, complete all as specified and as directed by Engr-in-Charge.

Aluminium anodized decorative grills with mesh size 100mm x 100mm made out of 5mm-6mm thick aluminium section with fixing rails of aluminium channels 12-15mm, complete all as specified and as directed.

Mild steel framed work as in grills, gratings etc., with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladder, framed balusters, railing, frame work for water tanks and similar work, complete conforming to Fe 290 Gde-E-165 including shop coat of red oxide including preparation of surface before fixing, complete all as specified and as directed.

Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, including dismantling of old AC corrugated sheet roofing, complete all as specified and as directed.

RMP sheeting 1.5 mm thick with 1.5 corrugation side lap fixed with coach screw and PVC washer in roof, wall etc.fixed with L-type or J-type or cranked hook bolts in lieu of coach screw, complete all as specified and as directed.

Providing and fixing false ceiling at all height with GRG(Glass Fibre Reinforced gypsum) false ceiling tiles of size 595x595mm of approved texture design and patterns as per IS 8225 :1987,Non combustible as per BS 476 (part-4)-1970 and light reflectance of 75-85% to be laid in true horizantal level suspended on inter locking metalT-grid of hot dopped galvanised iron section of 0.3 mm thick (galvanised@120grams per sqm including both sides) comprising of main -T runners of size 15x32 mm of length 3000mm.cross-T of size 15x32mm of length 1200mm and secondary intermediate cross Tof size 15x32 mm of length 600mm to form grid module of size 600x600mm,suspended from ceiling using galvanised mild steel items(galvanised@80 grams per sqm) i.e 50mm long,8mm outer diameter M-6 dash fasteners,6mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2mm galvanised iron perimeter wall angle of size 20x20x0.4 mm of length 3000 mm to be fixed on periphery wall/partition with the help of plastic rawl pluges at 450mm centre to centre and 40 mm long dry wall stainless steel screws, complete all as specified and as directed.

Providing and fixing false ceiling at all height with GRG(Glass Fibre Reinforced Gypsum) False ceiling tiles of size 595x595mm of approved texture design and patterns having moisture content less than 2%,humadity resistance of 99%,NRC 0.85(with 50mm thick glass wool) as per IS 8225 :1987,Non combustible as per BS 476 (part-4)-1970 and light reflectance of 75-85% to be laid in true horizantal level suspended on inter locking metalT-grid of hot dopped galvanised iron section of 0.3 mm thick (galvanised@120grams per sqm including both sides) comprising of main -T runners of size 24x32 mm of length 3000mm.cross-T of size 24x26mm of length 1200mm and secondary intermediate cross T of size 24x26 mm of length 600mm to form grid module of size 600x600mm,suspended from ceiling using galvanised mild steel items(galvanised@80 grams per sqm) i.e 50mm long,8mm outer diameter M-6 dash fasteners,6mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2mm galvanised iron perimeter wall angle of size 24x24x0.4 mm of length 3000 mm to be fixed on periphery wall/partition with the help of plastic rawl pluges at 450mm centre to centre and 40 mm long dry wall stainless steel screws, complete all as specified and as directed.

75mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate, as in sub base to receive topping layer finished even and rough, complete all as specified and as directed.

Vibro compacted Precast concrete interlocking paver blocks, factory made,any shape and size conforming to IS- 15658- 2006 of 60mm thick, M-35 Grade set, jointed in neat cement slurry and pointed flush with grey cement mixed with pigments to match colour of blocks in floors laid over 30mm thick sand cushioning, complete all as specified and as directed.

Vibro compacted Precast concrete interlocking paver blocks, factory made,any shape and size conforming to IS- 15658- 2006 of 80mm thick, M-40 Grade set, jointed in neat cement slurry and pointed flush with grey cement mixed with pigments to match colour of blocks in floors laid over 30mm thick sand cushioning, complete all as specified and as directed.

25mm thick PCC 1:2:4 type B-0 using 12.50mm graded crushed stone aggregate, as in sub base to receive topping layer finished even and rough, complete all as specified and as directed.

Chequered cement concrete tiles with white cement and pigment 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry incl 15mm thick Screed bed or bedding layer of cement mortar 1:4 for for laying tiles, complete all as specified and as directed.

Non skid ceramic coloured floor tiles 600mm x 600mm x 7-8mm thick as in floors, set and jointed in neat cement slurry and pointed in white cement with pigments to match over and including the provision of 15 mm thick bedding layer in cement mortar 1:4, complete all as specified and as directed.

Non skid ceramic coloured floor tiles 400mm x 400mm x 7-8mm thick as in floors, set and jointed in neat cement slurry and pointed in white cement with pigments to match over and including the provision of 15 mm thick bedding layer in cement mortar 1:4, complete all as specified and as directed.

Non skid ceramic coloured floor tiles 300mm x 300mm x 7-8mm thick as in floors, set and jointed in neat cement slurry and pointed in white cement with pigments to match over and including the provision of 15 mm thick bedding layer in cement mortar 1:4, complete all as specified and as directed.

All as per description of Srl items No. 40 to 42 here-in-before but in vertical surfaces of skirtings set and joint in neat cement slury and pointed in white or colour cement to match laid over 10 mm thick screed bed in cement mortar 1:4, complete all as specified and as directed.

Glazed Coloured Ceramic tiles in vertical surface 300mm x 450mm x 7mm thick set and joint in neat cement slury and pointed in white or colour cement to match laid over 10 mm thick screed bed in cement mortar 1:4, complete all as specified and as directed.

Renewing tiles in patches, area noy exceeding 5Sqm including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing old or new old tiles of size 300mm x 450mm x 7mm thick set and joint in neat cement slury and pointed in white or colour cement to match laid over 10 mm thick screed bed in cement mortar 1:4, complete all as specified and as directed.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified and as directed.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement, complete all as specified and as directed.

Rendering 5mm thick on fair faces of concrete surfaces as in ceilings in cement mortar 1:3 finished even and smooth without using extra cement, complete all as specified and as directed.

Preparation of newly plastered or unplastered surface of walls and applying two coats of oil bound distemper over a layer of 1mm Birla wall care putty, complete all as specified and as directed.

Preparation of newly plastered or unplastered surface of walls and applying two coats of oil bound distemper, complete all as specified and as directed.

Preparing old treated surfaces of ceilings and applying two coats of white wash, complete all as specified and as directed.

Water proofing treatment to surfaces of walls/concrete slabs damaged due to moisture and efflorescence including sunken areas of bathrooms/toilets, in balconies by applying acrylic polymer modified cementitious high performance coating or treatment all as per manufacturer's instructions, complete all as specified and as directed. (Make : SmartCare Damp Block 2K/Dr. Fixit

Sheet glass 5.50mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and as directed.

Sheet glass 5.50mm thick tinted black of designer quality and glazing with oil putty in square exceeding 0.5 Sqm in each pane including beading to be fixed in aluminium doors, complete all as specified and as directed.

Demolition to floor of WC with Indian type Water Closet and taking out the cinder/concrete from sunken portion, cleaning of RCC surface to remove dust, loose materials with compressed air or any other sutaible method depending on site condition, grinding off any sharp edges etc., all as directed. Applying glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top @seal-107@ 1.50 kg/Sqm glass fibre reinforcement Sika ® Fab-1 and top coat with Sika Top® Seal-107@ 1.50 kg/Sqm or equivalent of Fosroc or pidilite. Mechanical Protection to treatment with cement plaster 15 mm thick in cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika ® plastocrete plus including provision of 25 mm dia GI pipe spout projecting at least 150mm beyound outer face of wall. Refilling of sunken portion after water proof treatment with 40 mm graded brick bats and finished with 50mm thick PCC 1:2:4 type B-1, complete all as specified and as directed. ( Note : 1.The work will be executed by authorized manufacturers/Applicator).

15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs, complete all as specified and as directed.

All as per description of Srl item No. 57 here-in-before but except pipe, complete all as specified and as directed.

20mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs, complete all as specified and as directed.

All as per description of Srl item No. 59 here-in-before but except pipe, complete all as specified and as directed.

25mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs, complete all as specified and as directed.

All as per description of Srl item No. 61 here-in-before but except pipe, complete all as specified and as directed.

100mm bore cast iron soil, waste and vent pipes in any length with or without ears with cement joints fixed to walls, or laid in floors, complete all as specified and as directed.

75mm bore cast iron soil, waste and vent pipes in any length with or without ears with cement joints fixed to walls, or laid in floors, complete all as specified and as directed.

CI bend for 100mm bore any radius, diminishing pieces or tapers (larger bore measured), fixed to walls, complete all as specified and as directed.

CI bend for 75mm bore any radius, diminishing pieces or tapers (larger bore measured), fixed to walls, complete all as specified and as directed.

CI Branch pieces with oval access door for 100mm bore pipe fitting, double (equal or unequal, ordinary or inverted) (spigot or socket type) or with parallel branches, complete all as specified and as directed.

CI Branch pieces with oval access door for 75mm bore pipe fitting, double (equal or unequal, ordinary or inverted) (spigot or socket type) or with parallel branches, complete all as specified and as directed.

CI floor trap/Nahani trap, with grating including jointing to 75mm bore waste pipe fixed in cement concrete 1:2:4, type B-1, complete all as specified and as directed.

CI floor trap/Nahani trap, with grating including jointing to 100mm bore waste pipe fixed in cement concrete 1:2:4, type B-1, complete all as specified and as directed.

CI cowl including jointing to 75mm bore waste pipe fixed in cement joints, complete all as specified and as directed.

PVC 110mm bore (SWR) pipes double socketed, in any length with rubber ring joints, flaid in trenches or in floors, complete all as specified and as directed.

PVC (SWR) bend of 110mm bore any radius, complete all as specified and as directed.

Rotational moulded polythylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore, complete all as specified and as directed.

Rotational moulded polythylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore, complete all as specified and as directed.

PVC tank covers suitable for 1000Ltrs and 500 Ltrs capacity cylinderical and vertical type tanks and fixing the same in position, complete all as specified and directed by Engr in Charge.

20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for iron pipe and fixed minimum weight -210gms, fixed in repairs, complete all as specified and as directed.

15mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for iron pipe and fixed minimum weight -210gms, fixed in repairs, complete all as specified and as directed.

15 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe, fixed in repairs, complete all as specified and as directed.

20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe, fixed in repairs, complete all as specified and as directed.

CP grating with or without hole 100mm dia, fixed in repairs, complete all as specified and as directed.

Fancy type chromium plated Bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule 15mm bore, fixed in repairs, complete all as specified and as directed.

Fancy type Stop valves cast copper alloy chromium plated screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipes or for unions, 15mm dia of pipe, fixed in repairs, complete all as specified and as directed.

Fancy type Stop valves, cast copper alloy, screwed down, high pressure, with capstan head, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15mm bore, fixed in repairs, complete all as specified and as directed.

Fancy type Pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore, fixed in repairs, complete all as specified and as directed.

Basin mixer 15mm dia chromium plated brass with costed swinging spout including plugging and securing to walls, fixed in repairs, complete all as specified and as directed. (Make Cera cat part No F3001461/Somany Cat Part No 220912/Hindware Cat Part No F330014CP or equivalent in Jaquar

Wall mixer 3 in 1 inlet system with provision of both shower (hand shower and over head shower) complete with suitable long bend pipe connecting leg ,CP flange etc., fixed in repairs, complete all as specified and as directed.

Brass chromium plated shower rose 125 mm size with or without swivel joints, any size incl fixing to steel pipe or union, fixed in repairs, complete all as specified and as directed.

Corner Glass Shelf of size 300mm x 300mm including screws and bracket fixed in position, fixed in repairs, complete all as specified and as directed. (Make : Jaquar, Cat Part No-ACN-1173 or equivalent in Hindware/Somany/Cera as approved.

Tubular towel rack of brass chromium plated, 60cm lofixed with chromium plated brass screws and PVC gutties, fixed in repairs, complete all as specified and as directed.

Chromium plated towel ring round with round flange fixed with screw to wall, fixed in repairs, complete all as specified and as directed. (Make- Make : Jaquar, Cat Part No-ACN-1121BN or equivalent in Hindware/Somany/Cera as approved.

PVC cabinate mirror (white) with storage capacity of size 650mm x 450mm fixed with screw and PVC gutty on wall, fixed in repairs, complete all as specified and as directed. Make: Prayag or equivalent in Hindware/Somany/Cera as approved.

Chromium plated soap dish fixed in position, fixed in repairs, complete all as specified and as directed.

PVC 10 Ltrs valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with flush pipe etc. ISI approved, fixed in repairs, complete all as specified and as directed.

Vitreous china squalting pan of Orrisa pattern long pan size 580mm x 440mm white with 'P' or 'S' trap front or back inlet and foot rest any pattern including connection to trap and to flushing pipe etc complete including lime concrete bedding and making good to floor, fixed in repairs, complete all as specified and as directed.

Vitreous china wash down water closet pan pedestal pattern white including connection in drain and in flushing pipe complete including 'P' or 'S' trap, fixed in repairs, complete all as specified and as directed.

Vitreous china wash hand basin white flat back size 550mm x 400mm including brackets, including cutting for and pinning in ends of bracket or erecting stand fixing of waste pipe etc., fixed in repairs, complete all as specified and as directed.

Health faucet with 1.00 long CP flexible pipe and brass Chromium plated nuts, fixed in repairs, complete all as specified and as directed. (Make : Jaquar Cat Part No-ALD-565 or equivalent in Hindware/Somany/Cera as approved.

32mm/40mmPVC waste pipe 120cm long sutible for sink/wash hand basin, fixed in repairs, complete all as specified and as directed.

Chromium plated steel waste coupling for WHB and Sink etc., 32mm dia set with rubber, washer, plug etc., fixed in repairs, complete all as specified and as directed.

Chromium plated steel waste coupling for WHB and Sink etc., 40mm dia set with rubber, washer, plug etc., fixed in repairs, complete all as specified and as directed.

PVC connection 15mm dia and 450 mm long with 2 Nos PTMT nuts, fixed in repairs, complete all as specified and as directed.

PVC connection 15mm dia and 600 mm long with 2 Nos PTMT nuts, fixed in repairs, complete all as specified and as directed.

Sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified.

Sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm

Stainless steel kitchen plate rack size 750 x 900x250 mm deep made out of 1mm thick sheet including fitting arrangement, fixed in repairs, complete all as specified and as directed.

Plastic water closet seat, back, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device, fixed in repairs, complete all as specified and as directed.

15mm bore 2 way bib tap chromium plated brass with flange, fixed in repairs, complete all as specified and as directed.

Slat glazed stone ware gully trap 150mm x 150mm square mouthed 'P' type etc., fixed in repairs, complete all as specified and as directed.

15mm dia Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed in repairs, complete all as specified and as directed.

Disconnecting existing tanks of capacity exceeding 500Ltrs but not exceeding 1000Ltrs any shape, setting aside (or lowering if required) for repairs, cleaning , etc. and hoisting if required reconnecting and re-fixing in position, complete all as specified and as directed.

Cutting shrubs, wild growth/trees not exceeding 30cm girth and removing complete vegetation growth from walls, shafts, roofs including taking out roots from roof/brick work or concrete surfaces and making good the distrubed surfaces with PCC 1:2:4 type B-0, using 12.5mm graded crushed stone aggregate and disposing the rubbish from the site (MOD land) for a block of eleven multistoried flats, complete all as specified and as directed by the Engineer-in-Charge. ( Note : Rate in this item include cutting tress and shrub in each block any number of time during the currency of contract.)

Demolition of reinforced cement concrete water tanks of size not exceeding 2.5mtr x 2.5mtr x 2.0mtr at roof level and making good the disturbed surface of roof slabs with cement concrete 1:2:4 type B-0 using 12.5mm graded cruxhed stone aggregate including disposing off the debris/wastee materials off the site on completion of work, complete all as specified and as directed by the Engineer-in-Charge. ( Note : Rate in this item include for disposing off the waste materials/debris from roofs of multistoired buildings upto 8 stories height and off the premises to spaces allocated for disposal of waste building materials by Cantt Board.)

NOTE:- For minimum fair wages ,EPF and payment to labour employed, refer Sch A Note No-14,15 and Special Condition No 5 & 21.2 of this tender. Contractor must produce all the relevent record such as payment made to labour, EPF etc at the time of payment of RARs/Final bill. No payment will be released to contrator without producing the proper record.

NOTE:- Irrespective of whatever specified elsewhere in tender documents, all the debris/waste materials produced out of above mentioned work shall be removed out of Cantonement land and disposed off at locations notified by the Delhi Cantonment Board for disposal of waste building materials within NCR area, without any extra cost to Department under own arrangement of contractors. The rates quoted by the contractors against the items catered here-in-above in the BOQ are inclusive of said provision.

Vipul Construction

VED PRAKASH ARORA

MAA SANTOSHI ENTERPRISES

SHRI RAM CONSTRUCTION CO

ARYA ENTERPRISES