Special repair to Gandhi Bhawan Library Evening Collage of HP State Library at Shimla. (SH -Providing and fixing PVC flooring, wood work, Shutters, Ceiling, tiles, roofing, gutter, plaster etc.)

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within all leads All kinds of soil including carriage of materials within all leads and lifts.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:5:10 (1 cement : 5 coarse sand): 10 graded stone aggregate 40 mm nominal size) including carriage of materials within all leads and lifts as per direction of Engineer-in-charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size ) including carriage of materials within all leads and lifts.

Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. as per the direction of Engineer-in-Charge including carriage of material in all leads and lifts.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more per the direction of Engineer-in-Charge including carriage of material in all leads and lifts.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level Cement mortar 1:4 (1 cement :4 coarse sand including carriage of materials within all leads and lifts.

Providing wood work in frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in position. complete including carriage of materials within all leads and lifts:- 2nd class deodar wood.

Providing and fixing 35mm thick panelled glazed or panelled and glazed shutters for doors windows and clerestory windows including black enamelled iron butt hinges with necessary screws including carriage of materials within all leads and lifts as per direction of Engineer-in-charge in 2nd class deodar wood.

Providing and fixing 35mm thick wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85G with wire of dia 0.56mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws complete including carriage of materials within all leads and lifts as per direction of Engineer-in-charge in 2nd class deodar wood.

25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with Second class deodar wood including carriage of materials within all leads and lifts.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including carriage of materials within all leads and lifts.

Providing and fixing 250x16 mm aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete including carriage of materials within all leads and lifts.

Providing and fixing 150x10 mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials within all leads and lifts.

Providing and fixing 125mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials in all leads and lifts.

Providing wood work in frames of false celling partitions etc. sawn and put-up in position complete including carriage of materials within all leads and lifts in 2nd class chil/Rai wood.

Providing and fixing 12mm thick water proof shuttering ply of standard quality ISI mark and approved shade and colour in panelling/flooring/cup-board and wall linning including mitring at junctions, butt measured and paid for separately) complete including carriage of material within all leads and lifts.

1.5 mm thick pvc/rubber tiles flooring (L.G. Make or equivalent) plain, coloured. corbed or mosaic or mattled finish, laid with approved adhesive on sub floor damp proofing treetment(to be measured separately)for payment including carriage of materials within all leads and lifts.

Providing and fixing PGI Sheet 0.63mm thick in ceiling of approved quality with butt jointing and nails/ screws etc. complete (frame work and fillets to be measured and paid for separtely) including carriage of materials within all leads and lifts as per direction of Engineer-in-charge.

Providing and fixing plain square edged cover fillets (beading) 40mmx12mm section with wood screws in ceiling and lining including mitring at junctions in 1st class deodar wood including carriage of materials within all leads and lifts as per direction of Engineer-in-charge.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including carriage of materials within all leads and lifts.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete including carriage of materials within all leads and lifts.

Providing and fixing 30cm wide 90cm overall box type gutter 0.45mm thick prepainted sheet Tata Durashine or equivelant of approved brand shade and design with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating gutter fixed with bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design (frame work to be measured and paid for separately) :- 0.60 mm ( zero point sixty three millimetre) thick sheet including carriage of material within all leads and lifts.

Providing and fixing 0.60mm thick prepainted steel sheet Tata Durashine or equivelant in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5microns over 5microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge including carriage of materials upto all leads and lifts.

Providing and fixing Tata Durashine or equivelant precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete Ridges plain (500 - 600mm) including carriage of materials within all leads and lifts.

15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand) including carriage of materials within all leads and lifts.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge With cement mortar 1:4 (1 cement : 4 fine sand) including carriage of materials within all leads and lifts.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. completeincluding carriage of materials in all leads and lifts.

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) as directed by the Engineer-In-Charge including carriage of materials in all leads and lifts.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.including carriage of materials and as per the direction of the Engineer-in-Charge.

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour Two coats including carriage of materials within all leads and lifts.

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)including carriage of materials within all leads and lifts.

Applying priming coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including carriage of materials within all leads and lifts.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufactur including carriage of materials within all leads and lifts.

Painting on wood work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufactur including carriage of materials within all leads and lifts.

Slate roofing with 7.5 cm. Single lap single layer fixed on wooden batten(wood work to be paid for separately) With slates 60x30 cm size including carriage of materials within all leads and lifts.

Providing and fixing 110mm dia pipes on wall face PVC Finolex type "A" pipes including filling the joints with approved adhesive and inclunding require No. of coller and clamps etc complete including carriage of materials within all leads and lifts.

Providing and fixing PVC Finolex type "A" plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts. 110mm nominal size.

Providing and fixing PVC Finolex type "A" door bend with oval access door, insertion rubber washer 3mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts 110mm nominal size.

Providing and fixing 110mm nominal size PVC Finolex collars ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts.

Providing and fixing PVC Finolex type "A" floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of materials within all leads and lifts:-110mm X 90mm.

Providing and fixing 100mm dia CP grating for floor or nahani trap including carriage of materials within all leads and lifts.

Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and over to be measured and paid for separately):-Anglo Indian Universal closet including carriage of materials within all leads and lifts.

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete White solid plastic seat with lid including carriage of materials within all leads and lifts.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge including carriage of materials within all leads and lifts.

Providing and fixing CP towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms including carriage of materials within all leads and lifts.

Providing and fixing toilet paper holder C.P. brass including carriage of materials within all leads and lifts.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. including carriage of materials within all leads and lifts.

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings Flat back wash basin of size 550x400 mm including carriage of materials within all leads and lifts.

Providing and fixing PVC Waste Pipe flexible coil type 32mm dia including carriage of materials within all leads and lifts.

Providing and fixing CP brass pillar tap with capstan head including carriage of materials within all leads and lifts :-15mm dia.

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. including carriage of materials within all leads and lifts.

Providing and fixing CP brass bib tap with capstan head including carriage of materials within all leads and lifts :-15mm dia.

Providing and fixing 15 mm nominal bore uplasticised PVC connection pipe with brass unions 45 cm length including carriage of materials within all leads and lifts.

Providing and fixing 15mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 including carriage of materials within all leads and lifts.

Providing and fixing 15 mm dia nominal bore G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc including carriage of materials within all leads and lifts.

Providing and fixing 15 mm nominal bore G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete including carriage of materials within all leads and lifts.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete 10 litre capacity - White including carriage of materials within all leads and lifts.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including carriage of materials within all leads and lifts.

Providing and placing on terrace (at all floor levels) polyethylene three layer sintex make water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. including carriage of materials within all leads and lifts.

Providing and fixing brass full way valve with wheel including carriage of materials within all leads and lifts. 15mm nominal bore

Providing and fixing 15mm nominal bore brass ball valve (horizontal plunger type) High pressure with polythene plastic floatswith fixing etc. complete including carriage of materials within all leads and lifts.

Disposal of excavated earth by Mechanical means on approved dumping site of M.C. Shimla or on arranged by the contractor. i.e. through all mode of transportation including head load animal load or mechanical means alongwith transportation of the unuseful material for disposing including payment of prescribed charges of dumping to the owener of dumping site through all modes of transporation including head load animal load or mechanical means alongwith its levelling, fine dressing and to complete the work by mechanized means and labour(if any required) All useful materials such as stones, aggregate and slates shall be sorted out and stacked along roads side any loss of the public/private property during the courses of execution shall be the absolute responsibility of the contractor which shall have to be dully compensated by him in all respect as per direction of Engineer-in-Charge .

Pawn Kr