Loading…
Loading…
Tender Value
Refer Docs
Closing Date
3 Jul 2026, 4:00 pm5d left
Similar tender results from the same govt authority in the past 3 years.
General Manager I/c (Contracts)
Office of General Manager I/c (Contracts) , MECON Limited Ranchi
Supply, Erection, Testing and Trial Run of Electrical Work as per Technical Specification No. MEC/11/E1/Q7NC/TS/454A.
2026_MECON_842977_1
11.51. Q7NC/ Electrical Erection / 49
Single
Miscellaneous Works
90 days
Rajmahal OCP, Eastern Coalfields Limited
As per tender document
2 documents required · 2 mandatory
₹0
Exempted
MECON Limited Ranchi
26 Jun 2026
26 Jun 2026
3 Jul 2026
26 Jun 2026
3 Jul 2026
29 Jun 2026
29 Jun 2026
SUPPLY
Pre-fabricated, GI Ladder type cable tray 14 gauge (2 mm thick) hot rolled mild steel sheets (each piece of 2.5 meter standard length) conforming to as per IS:2629 and TS of following sizes;
Pre-fabricated, GI Perforated type cable tray 14 gauge (2 mm thick) hot rolled mild steel sheets (each piece of 2.5 meter standard length) conforming to as per IS:2629 and TS of following sizes;
Heavy duty, GI pipes/conduits of following sizes conforming to TS.
Heavy Duty 25mm Dia. PVC conduits
GI earthing flats of following sizes
Steel structures consisting of MS Angle, MS Channel, MS plate of various sizes required for fabrication of brackets/supporting structures for installation of cable trays, local control panels, light fittings, control panels, Base frame for all Electrical Panels in Electrical Buildings etc.
Miscellaneous erection and installation materials, all consumable materials required during erection & testing like insulating tapes, cable gland & lugs, terminals, ferrules (indelible, printed single tube), 2mm thick aluminum cable tags along with GI wire, connectors, GI cable markers, cable dressing materials, wires, brazing and soldering materials, fluxes, welding electrodes, gases, paints, clamps, Anchor fasteners, inserts, nuts, bolts, washers, sands, bricks, hardware, Inter panel wiring/termination (if any ), GI Pull wire for conduits, Glass wool/Cement Mortar/Putty, bending machines for conduit bending, self-locking type nylon cable ties for bunching Control Cables etc. required to complete the installation work. For erection of Panels & electrical equipment if cranes & hydra are required same shall be in the scope of Tenderer.
LV Power Cable - 1.1kV grade, XLPE Insulated, Aluminium/ Copper Conductor, PVC inner sheath, PVC outer sheath with FRLS Properties, Armoured conforming to TS and latest version of IS: 7098 (Part-1).
B. ERECTION, TESTING & TRIAL-RUN
Pre-fabricated, GI Ladder type cable tray 14 gauge (2 mm thick) hot rolled mild steel sheets (each piece of 2.5 meter standard length) conforming to as per IS:2629 and TS of following sizes;
Pre-fabricated, GI Perforated type cable tray 14 gauge (2 mm thick) hot rolled mild steel sheets (each piece of 2.5 meter standard length) conforming to as per IS:2629 and TS of following sizes;
Heavy duty, GI pipes/conduits of following sizes conforming to TS.
Heavy Duty 25mm Dia. PVC conduits
63A, 415V, 3 phase, 5 pin industrial type welding socket, heavy duty, weather proof, dust proof interlocked plug and switch with earthing contact, wall/column mounted, metal clad gasketted construction, screwed metal cover tied to it by a metal chain, suitable for loop-in/loop-out connection of cable.
Earthing & Lightning Pit (GI earth electrodes 40 mm Dia. Heavy Duty GI pipe of 3mtr. Long) along with homogenous mixture of bentonite clay and soil in the ratio of 1:3, bricks, cement, Cast Iron covers and all required erection and installation materials, excavation of soil, civil work etc. Earth pit area shall be of minimum 300mm x 300mm.
GI Earthing Flats of following sizes;
Test Link for Lightning Protection
Horizontal Conductor of Lightning Protection, Cleating, Supporting blocks of PCC/ insulating compound @1500mm along with Nut, Bolt M6 GI
Electronic Earth pit (with Cu plate attached to GI earth electrodes 40mm Dia. Heavy Duty GI pipe of 3mtr. Long) along with homogenous mixture of Bentonite clay and soil in the ratio of 1:3, bricks, cement, Cast Iron covers and all required erection and installation materials, excavation of soil, civil work etc. Earth pit area shall be of minimum 300mm x 300mm.
Lightning arrestor (Vertical air termination) complete with mounting rods.
Underground Cable Trench for laying of cables of 6.6kV HT, 1.1kV LT, Armoured, XLPE Insulated Aluminium/Copper Power & Control Cable including excavation of soil, provision of sand, bricks, RCC protective slab cover, back filling of soil, removal of debris, route markers and joint markers. (Approx. trench size is 0.8mtr. (W) x 0.9mtr. (D))
Cable Trench for laying of cables for road/street lighting, High Mast Lighting including excavation of soil, provision of sand, bricks, RCC protective slab cover, back filling of soil, removal of debris, route markers and joint markers. (Approx, trench size is 0.5mtr. (W) x 0.5mtr. (D))
GI UMBRELLA shape DN 40 pole 3.0 mtr for hanging of illumination lamps on railings/platforms
Sheet steel clad, wall/structure mounting, terminal boxes for looping in and out of light fittings.
Illumination System
415V LT Panels
LV POWER CABLES LAYING - Laying of 1.1kV grade, XLPE Insulated, Aluminium/ Copper Conductor, PVC inner sheath, PVC outer sheath with FRLS Properties, Armoured conforming to TS and latest version of IS: 7098 (Part-1).
LV CONTROL CABLES LAYING - Laying of 1.1kV grade, PVC Insulated, stranded (rm) annealed multi strand copper conductor, extruded PVC inner sheath, FRLS PVC outer sheath, multi-core, armoured conforming to TS and latest version of IS : 1554 (Part-I)
Incremental / Decremental / No change value to be indicated by the Bidder in the adjacent column.
In Case of "No Change", any value indicated in the Percentage Column, shall not be considered.
Total Contract Price (In Words)
Notes:
HSN / SAC Code of the above items shall be mandatorily indicated in the price-bid.
Tenderer shall strictly ensure that Un-priced copy of the PRICE BID does not contain any Price at all. Tenderers shall submit their Price bid and the Un-priced copy of Price schedule strictly as per the Price Format (Attachment-IV OF ITT) provided herewith and it is hereby suggested not to generate their own Price Format.
Any foot notes, remarks etc appearing in the PRICE BID should necessarily appear in the Un-priced copy of the PRICE BID.
Billing schedule with break-up shall be submitted by the successful bidder for MECON's approval after the award of contract.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.29 MB
Price_Schedule.xls
Tender Documents • 0.11 MB
ITT-Electrical Erection-23.06.2026.pdf
Tender Documents • 1.29 MB
Download all tender documents and submit your bid