Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.5 LAccepted-AOC 70 SUBHASH ROAD HARJINDER NAGAR KANPUR 208007 | KANPUR | KANPUR | UTTAR PRADESH | 208007 | L1 | Accepted-AOC ACCEPTANCE OF TENDER | |
| 2 | L2₹33.0 L+₹51,446.64 (1.58%)Rejected-Finance | L2 | Rejected-Finance BEING HIGHER BID | |
| 3 | L3₹33.7 L+₹1.2 L (3.67%)Rejected-Finance | L3 | Rejected-Finance BEING HIGHER BID | |
| 4 | L4₹34.5 L+₹2.0 L (6.09%)Rejected-Finance | L4 | Rejected-Finance BEING HIGHER BID | |
| 5 | L4₹37.0 L+₹4.5 L (13.9%)Rejected-Finance C O BIPIN KUMAR VILL SATNAPUR POST BAHADURGANJ DISTT GHAZIPUR UP 275201 | BAHADURGANJ | GHAZIPUR | UTTAR PRADESH | 275201 | L4 | Rejected-Finance BEIGN HIGHER BID |
Tender Value
₹38.5 L
EMD Value
₹77,000
Closing Date
26 Sept 2022, 6:00 pmClosed
CWE LUCKNOW
HQ CWE Lucknow, 229 MG Road, Lucknow Cantt, Lucknow-226002
SPL REPAIR TO INTERNAL ROAD (APPROX 2800 MTRS) AT UNIT PREMISES NO 2 TT WING AMC CC UNDER GE EAST LUCKNOW
2022_MES_543299_2
CWE/LKO/E/T-59 OF 2022-23
Open Tender
Civil Works - Roads
Item Rate
180 days
Lucknow
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE East lucknow
₹77,000
Yes
6 Oct 2022
7 Sept 2022
28 Sept 2022
7 Sept 2022
26 Sept 2022
14 Sept 2022
7 Sept 2022 - 14 Sept 2022
Amount
M&L for repair to pot holes of any depth not exc 1 sqm each including sweeping free from dust and mud or water scroing sunken surfaces in roads, paths etc cutting around edges to at least 25 mm in depth making good by by applying tack coat with bituminous primer using paving bitumen VG-10 grade @ 5 kg per 10 sqm, putting in premix as specified for thin bituminous carpet (2cm thick) well rammed and sealed with premixed sand seal coat (6.8 Kg of binder with 0.06 Cum of sand) including suply of premix binder and sand again well rammed, including rolling, depth of potholes n exc 30mm using paving bitumen VG 30 grade complete all as specified and directed.
Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 Sqm & depth exc 50 mm and n exc 100 mm complete all as specified and directed.
M&L for preparing black top surface by brushing with wire brushes for removing caked mud etc. using mechanical compressor to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer using paving bitumen VG-10 @ 5.00 kg per 10 sqm complete all as specified and directed.
M&L for premix bituminous macadam with 4% binder content by weight of total mix laid/rolled and compacted to reqd gradient and camber (consolidated thickness 75mm or less) using 8 to 12 ton power road roller with paving Bitumen VG-30 complete all as specifed and directed.
M&L for Bituminious Premix Semi dense Asphaltic concrete 30mm consilidated thickness with 5.50% binder content by weight of Total mix, rolled and compacted to required camber and gradient using power road Roller (8 to 12 tonne) complete with paving Bitumen VG-30 complete all as specifed and directed.
M&L for providing and laying 2.50 mm thick hot applied thermo plastic road marking materials in uniform thickness with glass beads as per clause No 803 of MORTH specification including cleaning of roads surface, heating the material within specified temperature limits for marking with all necessary arrangements required complete all as specified and directed.
S&F reflective pavement marker of yellow/red colour (Cat Eye) with micro prismatic lense in both directions having thermoplastic body with flex resistant base and abrasion resistant creamer coating, fixing to road surfaces with special adhesive and hammer nails complete all as specified and directed by Engr-in-charge
M&L for Bituminious Premix Semi dense Asphaltic concrete with 5.50% binder content by weight of Total mix of paving bitumen VG 30 grade, poured in the forms of requisite heights shape and width for rumble strip / speed breaker, after lifting of forms surface finished to required shape and well compacted complete all as specifed and directed.
S & F in repair retro reflective signage made 600mmx900mm and 2mm thick aluminium sheet face to be fully covered with high intensity prismetic (HIP) retro reflective sheeting confiming to ASTMD-4956 01 as per colour required and letters, symbosis shall be made of same retro reflective sheeting shall be duly processed on base aluminium substrate board to be supplied along with back supported angle iron frame 25x25x3mm all around mounted on 75x75x6mm MS angle and this angle firmly embded 0.60m below groud level in PCC 1:3:6 type C-2(using 20mm graded stone aggregate) and duly painted with two coats of synthetic enamel paint alongwith fixing accessories complete as per MORT&H specifications and as directed.
S & F MS pipe having 75mm dia OD thickness 1.4mm, 1200mm length duly powder coated in black / white colour and shall be embedded in 0.60m below groud level with PCC 1:3:6 type C-2(using 20mm graded stone aggregate) with 03 Nos x 75mm high intensity prismetic (HIP) retro reflective tapes type IV as per IRC 67/2010 and MS pipe have powder coated jali & mesh for reflector portion complete as per specified and as directed.
M/s Ram Singh Agarwal
BHARAT ASSOCIATES PVT LTD
M/S- YASH BUILDERS
M/s Bipin Construction
M/s Ramesh Chandra
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .