Civil work Tr.plinth . retaining wall and Electrical works at Paramakudi

Amount

Earth work excavation for foundation in hard stiff clay, stiff black cotton hard red earth, shales, muram, gravel, stoney earth and earth mixed with small size boulders with an initial lead, lift, etc, complete.

Supplying and filling of M sand sand in foundation and basement with well water and consolidation as per specn.incliding cost of all materials labour, lead, lift, etc., complete.

PCC 1:3:6 mix using 40mm HBS machine crushed metal for foundation with out formwork including cost of all labour, materials, lead, lift, curing, etc., complete.

RCC M25 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement.For Column Footing concrete. & Raft

PCC 1:2:4 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. Complete.

Brickwork in CM 1:5 mix using II class chamber brick of size 9"x 4 3/8" x 2 3/4" for bath, fol, brick on edge, partition wall, superstructure including cost of labour materials, curing, lead, lift, etc., complete.

Providing RCC 1:1.5:3 using 20mm to 12mm down graded HBG metal including cost of all materials, labour lift, hire charges for mixer machine vibrator with form work but excluding cost of providing reinforcement for for pre cast cover slab

Supplying and fabricating and placing in position of MS / RTS steel reinforcement for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost of all materials, lead, lift, labour, cost of binding wire, etc., complete.

Plastering with CM. 1:3 mix 12mm thick for ceiling,fol, bath, rcc pillars, sunshade, loft, etc., including cost of materials, labour, lead, lift, watering, curing, etc., complete.

Supplying & fixing of M.S. rail (90 IBS) for transformer plinth including cost of rail, cutting the rail to the required length and welding grip rods for the rails, transport charges, labour for fixing and handling, T & P etc., complete.

Suppying , Fabricating and fixing the angles in position of the G.I. angles for cable rack including cost of labour , cost of steel and hot dip galvanising charges ,fabricating etc complete.

colour washing two coats with exterior emulsion paint over one coat of white cement primer for outside wall including cost of all materials, labour, lead, lift etc complete.

Supply and spreading of quarry dust inside the yard as per std. spec.including cost of materials ,labour lead,lift etc

Supply and apreading of 20mm of HB stone inside the yard as per std. spec.including cost of materials ,labour lead,lift etc

Supplying and fixing of earth trough including cost of labour lead lift etc complete.

Providing and laying PVC high density pipe including cost of all materials viz.bend, labour for cutting threading fixing and tightening necessary excavation etc., 32mm dia

Providing and laying PVC high density pipe including cost of all materials viz.bend, labour for cutting threading fixing and tightening necessary excavation etc., 25mm dia

Supplying and fixing of PVC end cap including cost of materials, labour etc complete

Supplying and fixing inposition of GM gate valve best quality such as leader, zeolite, zenith including cost of all special fixtures lead, lift,etc., complete.32 mm dia GM Gate valve

Providing Sintex water tank of capacity of 1000 lits including cost of material, labour, lead, lift, transportation and placing in position over head room etc., as directed by the engineer at site.

Clearing the site with scrub jungle

Earthwork excavating, depositing on bank with an initial lead of 10m and lift of 2m in Softy disintegrated rock,laterite soft rock or kankar not requiring blasting.

MR-&-DMR ( not requiring blasting ) Earthwork excavating, depositing on bank with an initial lead of 10m and lift of 2m in medium rock and dence medium rock not requiring blasting.

PCC 1:3:6 using 40mm HBS jelly including cost of all materials, lead,lift etc., complete without form work.(As per Data A&B- To be done by contractor)

PCC 1:3:6 using 40mm HBS jelly including cost of all materials, lead,lift etc., complete with form work

PCC 1:2:4 using 20 mm HBS jelly including cost of all materials, lead, lift, curing etc., complete with form work. ( As per Data A&C To be done by contractor)

Brick Work with CM 1:6 using second class brick 9"*43/8"*23/4" including cost of all materials labour lead lift etccuring etc., complete

Plastering with CM 1:3, 12mm thick including cost of all materials, lead, lift, curing etc., complete

Labour charges for painting poles plinths of structure & eqipments plinths etc.,with snowcem two coats over two coats of white cement including cost of paint and other materials, labour,lead, lift, curing etc., complete.

Labour, machinery, Consumables for the Fabrication for steel structures Heavy section (14 kg/m and above)

Labour, machinery, Consumables for the Fabrication for steel structures Light section (below 14 kg/m)

Labour for the Erection of the Fabricated Steel Structures.Heavy section (14 kg/m and above)

Labour for the Erection of the Fabricated Steel Structures.. Light section (below 14 kg/m)

Labour, machinery, consumables for fabrication, erection of earrthmat, earth connection, earth electrode, earthspike (including sharpening of earth spike). As directed by the field engineer

Supply of paint of reputed make and Labour,consumables for first primer coat using red oxide Paint and first finish coat of Painting using Aluminium Paint including consumables, after proper surface preparation using appropriate machinery to remove rust/scales etc as directed by the field engineer .

Supply of paint of reputed make (ie Asian,Dulux,Nerolec paint) and Labour for Second coat of Painting using Aluminium paint including consumables.

Supply & Labour charges for two coats of enamel painting in any substation structures, steels, etc and wherever required including the cost of reputed make paints and other consumables as directed by the field engineer.

Supply and providing of 450 - 600 mm dia, 300 mm height, 36 mm thick cement collar with top cover for identification of earth electrode location as directed by the field engineer.

Labour charges for providing /placing grouting bolt by template for breaker/230 or 110KV C.Ts structure foundation as directed by the field engineer

Labour for erection of Breaker using crane arranged by the Contractor including the cost of gada cloth taflan tape and other consumables including support structure providing holes, gas filling wherever necessary as directed by the field engineer.(22/11KV VCB)

Labour for erection of Measurement transformers, reactor units, using Crane arranged by the Contractor including providing holes wherever required as directed by the field engineer.(22/11KV CT and PT)

Labour for erection of Isolators with proper allingments including accessories, Meggering and cost of consumables and lubricants and as directed by the field engineer.110 KV with out earth.

Labour for erection of Isolators with proper allingments including accessories, Meggering and cost of consumables and lubricants and as directed by the field engineer.22 KV .

Labour for the Erection of Strung bus and all related hardwares, fittings, clamps including meggering hoisting of insulators,and consumbles and as directed by the filed engineer. (Up to 33 KV single Conductor Strung bus/phase)

Labour for the erection of Insulator single pole stack for supports Uprights / Underhang including Meggering & other consumables and as directed by the field engineer. 110 KV

Labour for the erection of Insulator single pole stack for supports Uprights / Underhang including Meggering & other consumables and as directed by the field engineer. 22KV

Labour for erection of LAS station/Distribution type single unit including monitors & accessories 110 KV LAS

Labour for erection of LAS station/Distribution type single unit including monitors & accessories 22 KV LAS

Labour for the Erection of Bus bar including suitable modifications of End clamps,providing holes Wherever necessary as directed by the filed engineer. 50 mm .

Labour for the Erection of Bus bar including suitable modifications of End clamps,providing holes Wherever necessary as directed by the filed engineer. 50 mm with bend

Labour for the Erection of Bus bar including suitable modifications of End clamps,providing holes Wherever necessary as directed by the filed engineer.75 mm length.

Labour for the Erection of Jumper / Droppers using Moose / Zebra / panther Conductors including Modification of End clamps, providing holes etc wherever necessary as directed by the field engineer.

Labour for the Erection of Control Panels includings consumables as directed by the field engineer. Simplex type/AC/DC/C&R Panel of Non-Grid type, Battery Chargers, Single feeder Control/Relay Panels of Grid type (P&C)

Labour for erection of cable in duct/trench/clamping on structures - neat laying in the ducts with identification Tags,Plastic token in all duct corners for easy identification of cables. including fabrication of clamps and fixing at uniform intervals as directed by the field engineer. Up to 8 Core

Labour for erection of cable in duct/trench/clamping on structures - neat laying in the ducts with identification Tags,Plastic token in all duct corners for easy identification of cables. including fabrication of clamps and fixing at uniform intervals as directed by the field engineer. above 8 Core

Supply and glanding of ISI mark cable gland of suitable size of reputed make including removing of insulation of cables and providing suitable holes as required and as directed by the field engineer. 35 mm

Supply and glanding of ISI mark cable gland of suitable size of reputed make including removing of insulation of cables and providing suitable holes as required and as directed by the field engineer. 22/25 mm

Supply and glanding of ISI mark cable gland of suitable size of reputed make including removing of insulation of cables and providing suitable holes as required and as directed by the field engineer. 16/19 mm

Supply and fixing of godrej 6 lever navtol lock with triplicate keys for A.B.Switches and for any other purpose including the cost of ring and key token as directed by the field engineer.

Supply and fixing of Key chain ring and identification key token for A.B.Switches as directed by the field engineer.

Labour charges for writing details in any finished surface/board including cost of enamel paints and other consumables as directed by the field engineer

Labour for excavating and refilling of earth /trench for earthmat, cable, etc., of any size/depth narrow excavation as directed by the field engineer. Normal clay / hard gravel soil

Supply and termination of cable core end dressed neatly including the cost of cable socket (lug) ferrules, sleeves, tags, ties, stropes, etc., as directed by the field engineer.(No.of core ends in unit of 1000).

Fabrication, supply and fixing of C.T/P.T junction box of size 400x300x150 mm of 16 SWG(1.6mm) M.S.sheet with primer coat paint, Supply,Fabrication and erection of Box fixing Flats using 50x8 MSF, Supply and Fixing of 25x3mm² Braided Flexible Copper loops to box earth., Two coat of Enamel Paint, provision for fixing terminal blocks/MCBs including consumables, VAT, fright, etc., as directed by the field engineer on site requirements.(The box shall be vermin proof shall have sturdy hinges, & locking arrangements)

fabrication,supply&fixing of Earthpit detail board including the cost of 20SWG CR Sheet,10mm RTS Rod ,T &P etc.,complete.

Supply and erection of Vinyl Sticker cutting/Printing on Vinyl Sticker/Foam board to be used for main equipment, slogan, name board & any other purpose of required sizes as directed by the field engineer.

Supply and fabrication and erection of eye bolts/grout bolt with 20/22 mm rod confirming to IS with proper threading and 2 nos MS Nuts as directed by the field Engineer Eye Bolt

Labour for loading /unloading shifting of department materials at store or site by the contractor without using board grane for one operation 110 KVCentre rotating ABS

Labour for loading /unloading shifting of department materials at store or site by the contractor without using board grane for one operation Control Cables

Labour for loading /unloading shifting of department materials at store or site by the contractor without using board grane for one operation 110 KV LAS

Labour for loading /unloading shifting of department materials at store or site by the contractor without using board grane for one operation AC/DC/C&R Panels for Non grid type

Labour for loading /unloading shifting of department materials at store or site by the contractor without using board grane for one operation33 KV VCB (out door)1250 A,25 KA

Labour for loading /unloading shifting of department materials at store or site by the contractor without using board grane for one operation 33 KVCentre rotating ABS

Labour for loading /unloading shifting of department materials at store or site by the contractor without using board grane for one operation 33 KV C.Ts/PT/LAS

Labour for loading /unloading shifting of department materials at store or site by the contractor without using board grane for one operation 110KV Solid core Insulator

Labour for loading /unloading shifting of department materials at store or site by the contractor without using board grane for one operation 75mm Dia IPS Aluminium Bus bar

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, including VAT, frieght etc., confirming to IS confirming to IS as per the drawing and specification. 4 bolt Tension Fitting

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, including VAT, frieght etc., confirming to IS confirming to IS as per the drawing and specification. Switch End Clamp for Zebra

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, including VAT, frieght etc., confirming to IS confirming to IS as per the drawing and specification. Free end clamp 50mm

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, including VAT, frieght etc., confirming to IS confirming to IS as per the drawing and specification. Free end clamp 75mm

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, including VAT, frieght etc., confirming to IS confirming to IS as per the drawing and specification. Switch End Clamp for 3" bus

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, including VAT, frieght etc., confirming to IS confirming to IS as per the drawing and specification T Clamp for zebra to Zebra

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, including VAT, frieght etc., confirming to IS confirming to IS as per the drawing and specification T Clamp for 75m Bus to Zebra

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, including VAT, frieght etc., confirming to IS confirming to IS as per the drawing and specification PG Clamp for zebra

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, including VAT, frieght etc., confirming to IS confirming to IS as per the drawing and specification T Clamp for 50m Bus to Zebra

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, including VAT, frieght etc., confirming to IS confirming to IS as per the drawing and specification. 75mm Corana Bell

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, including VAT, frieght etc., confirming to IS confirming to IS as per the drawing and specification. 50mm Corana Bell

Providing Earth bore 140/150 mm dia using power rig or 100/125 mm dia using hand bore set including the labour, lead, lift etc., sedimentary strata of clay & sand stone shale pebbles boulders etc., for earth Pits with supply and providing of Bentonite powder(Sodium Bentonite) 5Kg /Mtr depth of the bore mixed with low resistivity earths as directed by the field Engineer. (Earth to be supplied by the contractor).

Labour for Dismantling of steel structures including all consumables Heavy section (above 14 kg/m)

Labour for Dismantling of LAS station/Distribution type single unit including monitos, accessories & consumables. 110 KV LAS

Supply and provision of M8,M10,M12 and M16 (full /Half thread)G.I.bolt and nuts of various sizes including plate/spring washers as required and as directed by the field engineer.

Supply of steel items asper TNEB specification including cost of materials, loading, transporting, unloading and delivery at site,complete 200x100mm RS Joist

Supply of steel items asper TNEB specification including cost of materials, loading, transporting, unloading and delivery at site,complete 125 x 65 mm M.S.Channel

Supply of steel items asper TNEB specification including cost of materials, loading, transporting, unloading and delivery at site,complete 100 x 50 mm M.S.Channel

Supply of steel items asper TNEB specification including cost of materials, loading, transporting, unloading and delivery at site,complete 65 x 65 x 6 mm M.S.Angle

Supply of steel items asper TNEB specification including cost of materials, loading, transporting, unloading and delivery at site,complete 50 x 50 x 6 mm M.S.Angle

Supply of steel items asper TNEB specification including cost of materials, loading, transporting, unloading and delivery at site,complete 65x 10 mm M.S.Flat

Supply of steel items asper TNEB specification including cost of materials, loading, transporting, unloading and delivery at site,complete. 40 mm M.S Round Rod

Supply of steel items asper TNEB specification including cost of materials, loading, transporting, unloading and delivery at site,complete 50 x 8 mm M.S.Flat

SGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only

CGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only

Inter-state GST @18% for other than Tamil Nadu supplier. If the contractor is within Tamil Nadu may be quoted as "0" only