Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.5 LAccepted-AOC 1291 1ST FLOOR SECTOR 26 PANCHKULA HARYANA 134116 | PANCHKULA | HARYANA | 134116 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹24.9 L+₹3.1 L (14.0%)Rejected-AOC | L2 | Rejected-AOC Other Than L1 | |
| 3 | L3₹25.1 L+₹3.3 L (15.2%)Rejected-AOC | L3 | Rejected-AOC Other Than L1 | |
| 4 | L4₹25.4 L+₹3.6 L (16.6%)Rejected-AOC BOGDANG NUBRA PIN 194101 | BOGDANG | NUBRA | LADAKH | 194101 | L4 | Rejected-AOC Other Than L1 |
Tender Value
₹24.9 L
EMD Value
₹49,840
Closing Date
20 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj Devdutt Deshpande
GARRISON ENGINEER (AF) THOISE 19 FBSU, c/o 56 APO, PIN 937219
REPAIR/ REPLACEMENT OF TILES, FLOORING AND CERTAIN MISC REPAIRS TO TOILETS AT VARIOUS BLDGS UNDER GE (AF) THOISE
2024_MES_647189_1
GEAF/T-13/2024-25
Open Tender
Civil Works
Item Wise
210 days
GE AF THOISE
As per tender documents
7 documents required · 7 mandatory
₹500
GE AF THOISE
₹49,840
Yes
5 Jul 2024
20 Mar 2024
22 Apr 2024
20 Mar 2024
20 Apr 2024
4 Apr 2024
Amount
Dismanting floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish of the permis, complete all as sepcified and directed by Engr-in-Charge.
M & L for Glazed ceramic coloured tiles in vertical surface 350x250x7mm/ 450x350x7mm thick set over rendering 10 mm thick in cm 1:4 and jointed in neat cement slurry and pointed in white or colour cement to match complete all as speciifed and directed by Engr-in Charge.
M & L for Non skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, over and including 15 mm thick screed bed in cm 1:4 in floors etc, set and jointed in neat cement slurry and jointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge.
M & L Non skid ceramic joint fee coloured tiles 7 to 8 mm thick (square/rentangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, over and including 15 mm thick screed bed in cm 1:4 in floors etc set and join free in neat cement slurry and pointed in white or coloured cement to match complete all as specified by Engr-in Charge.
M & L for Vitrified Ceramic tiles in light shade 10 mm thick (square/retengular) polished area of each tiles not exceeding 0.36 sqm but not exceeding 0.42 sqm, over 15mm thick screed bed in CM 1:4 in floors etc. set and jointed in neat cement slurry and pointed in white or cloloured cement to match complete all as specified and directed by ENgr-in-Charge.
Demolation of cement concrete (Un-Reinforced) any desciption and in any position not otherwise specifically provided for
S & F Machine cut kota stone slab flooring 20-25 mm thick over cement scareed base laid and jointed with grey cement slurry mixed pigment to match the shade of the slab including and polishing incl dismanting complete all as specified and directed by Engr-in Charge.
M & L 20 to 25 mm thick Chequered tiles using cement and pigments of size 300x 300 mm with wear resitance coating of approved design and colour laid with cement slurry @ 3.00 per Sqm, completed all as specified and as directed by Engr-in Charge
M &L screed bed or bedding layer or layer of 1:4 mortar 20 mm thick for laying floor finishes complete all as specified and directed by Engr-in Charge
S & F Machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15668-2006 of 60 mm thickness. M-35 Grade with grey cement and pigment Complete all as specified and directed by Engr-in -Charge
M &L sand cushioning under floors or in foundations including watering and consoildation
M & L for 50 mm thick PCC 1:2:4 tye B-1 using 20 mm graded agg in flooring finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
Dismanting of cast iron or reinforced concrete drain pipes upto 100 mm dia, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed .
S & F for PVC (SWR) pipes 110 mm bore single soackted in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed
S & F for PVA (SWR) pipes 75 mm bore single socketed, in any length with rubber ring joints, fixed on floor complete all as specified and directed.
Demolation of cement concrete (Reinofreced) any description and in any position not otherwise specifically providied for.
Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for cloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips for Drain cover. Complete all as specified and directed bny Engr-in- Charge.
M & L for PCC (1:2:4) B1 (using 20 mm graded stone aggregate) as in slabs supported on walls and the like complete all as specified and directed
Form work to soffits of surspended slabs flat surface of concrete finished rough surfaces of concrete not exceeding 200 mm thick complete all as specified and directed
M & L 20 mm thick Granite ( of any type) work (table rubbed and ploished) in steps, jambs, pillars, window cills, cooking platforms and like an cement mortar )(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of grantie incl dismanting complete all as specified and directed
Demolation for pre-cast as arches concrete block masonry built in CM incl all quoins arched pillers etc but excluding arches facing dressed stone and pre cast concrete article comlete all as specified
M &L for precast cement concrete block masonry with solid block, type C1 1:3:6 (using 20 mm graded aggregate) exc 10 cm in width and setting in cement mortar 1:6 extra complete all as specified
M &L for external rendering 15mm thick on fair faces of brick work in CM 1:4 finished even and smooth with out using extra cement complete all as specified and directed
M & L for internal rendering 10 mm thick in fair faces of brick work in CM 1:6 finished even and smoth with out using extra cement complete all as specified and directed
M & L preparing newly palstered or unplastered surface of walls and applying two coats of cement base paint complete all as specified and directed
M & L for preparation of newly plastered surface of wall including Chalk whiting, on plastered surfaces etc and applying two coats of whole wash on walls, complete all as specified
Taking down chowkats or frames exc, 1.5 sqm but not exc 4 sqm each (without talking off shutters from the frame) including all acessaries complete all as specified and directed
S& F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel heaving a PVC sheet strip of 20 mm width suck inside with solvent cement for stiles and plain clolour PVC sheets for top rails, lock rail & bottom rail either side & as gap insert for top rail & bottom rail, paneling of palin colour PVC sheet to be fitted in the M.S frame wedded/sealed to the stiles, & rails with suitbale PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. complete all as specified and directed
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete or as directed by Engr-in-Charge
S & F 300 mm size Aluminum alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extrued section and fixing bolts and sliding botls complete all as specified and directed
S 7F 150mm size Aluminum anodised, barrel tower bolts of extruded section complete all as specified and directed
S & F Extruded Aluminium alloy handles, fabricated type, anodised 100mm size complete all as specified and directed
S &F Butt hinges, medium weight cold rolled mild steel and fixed 75 mm size complete all as specified and directed
S & F in repair dor Viterous China valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethlele of low or high density of PVC 32 mm dia for low level cistern complete all as specified and directed
S & F in repair for Viterous China wash basin, angle back, sizw 600x480 mm white, excluding taps, waste, chain and plug and procelain stopper but including brackets, bottle trap 32 mm dia and waste coupling 32 mm dia complete all as specified and directed
Taking down steel tubing dia 15 mm and connections, including cleaning or refixing or removal to stone, complete all as specified and directed and directed
Taking down steel tubing dia 10 mm and connections, including cleaning for refixing or removal to store, complete all as specified and directed
S&F for Glavanised steel tubes, medium grade 15 mm dia, complete all as specifiied and directed
S&F for Glavansied steel tubes, medium grade 20 mm dia, complete all as specified and directed
S &F in repair Grating doom 100mm dia with waste hole of PTMT (Miimum weight 25 gms) complete all as specified and directed
S &F in repair bip taps, 15 mm dia with cast copper alloy with crutch or butterfly handlem screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed
S & F in repair Pillar taps 15 dia, cast copper alloy, with capstan heads, choromium plated, screwed down high pressure, with or without lettered "Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed
S & F in repair for PVC connections 15 mm size with PTMT nuts of length 600 mm.Complete all as and directed by Engr-in -Charge.
S & F in repair fr stainless steel indian water closet pan (Orissa patern), of size 584.2mm x482.6 mm and 3mm thick, Oval shape (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed
S & F in repairs Viterous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including PCC ()1:2:4) type B-1(using 20 mm graded stone aggregate) for fixing of WC and making good floor to match the exisiting surface, complete all as specified and as directed by Engr-in Charge
M/S GHULAM MOHAMMAD CHATAPA
M/S MOHD MUSSA
MEHDI ALI
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .