Provision for distribution of input and output power and necessary electrical works for Installation of 8 Units (2 x 100 KVA) UPS in different location at CSIR-CMERI Institute, Durgapur

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group: C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC sulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5sq. mm + 1 X 2.5 sq. mm earth wire

2 X 6 sq. mm + 1X6 sq. mm earth wire

2 X 10 sq. mm + 1X6 sq. mm earth wire

4 X 6 sq. mm + 2X6 sq. mm earth wire

4 X 10 sq. mm + 2X6 sq. mm earth wire

Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without CB/RCCB/Isolator)

8 Way, Double door

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and comissioning etc. as required.

Installation of exhaust fan with making suitabe opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep.

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Double pole

Earthing with G.I. earth pipe 4.5 meter long x 40 mm dia. Including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc with charcoal or coke and salt as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Providing and fixing 25 mm X 5 mm G.1. strip on surface or in recess for connections etc. as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Above 185 sq. mm and upto 400 sq. mm

Above 35 sq. mm and upto 95 sq. mm

Up to 35 sqmm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.

Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)

Above 95 sq. mm and upto 185 sq. mm (clamped with 35/40x3mm MS flat clamp)

Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

Upto 35 sq. mm (clamped with 1mm thick saddle)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/HUME/ METAL pipe as required

Above 185 sq. mm and upto 400 sq. mm

Above 95 sq. mm and upto 185 sq. mm

Above 35 sq. mm and upto 95 sq. mm

Up to 35 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

4 X 300 sq. mm (70mm)

4 X 240 sq. mm (62mm)

4X 185 sq. mm (57mm)

3.5 X 95 sq. mm (45mm)

3.5 X 70 sq. mm (38mm)

3.5 X 50 sq. mm (35mm)

3.5 X 35 sq. mm (32mm)

3.5 X 25 sq. mm (28mm)

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in onvenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.

300 mm width X 50 mm depth X 1.6 mm thickness

150 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated painted with powder coating M.S. cable trays bends with perforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.

300 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated painted with powder coating M.S. cable trays Tee with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.

300 mm width X 50 mm depth X 1.6 mm thickness

150 mm width X 50 mm depth X 1.6 mm thickness

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3x2.5 sq. mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of light class G.I. pipe of 100 mm dia. (nominal) 3 metres length along the wall/drain for protection of under ground cable as required.

Supplying and fixing of light class G.I. pipe of 80 mm dia. (nominal) 3 metres length along the wall/drain for protection of under ground cable as required.

Supplying and fixing of light class G.I. pipe of 50 mm dia. (nominal) 3 metres length along the wall/drain for protection of under ground cable as required.

Supply and fixing of surface Mounting on the wall/ceiling CERC sheet steeleliminating spot welds & hence rust free powder coated batten rail for TLED lamps LED Tube light fittings, along with supply and fixing 1200 mm, 20 watts 220V, 50 Hz, LED tube etc as required, 20W T8 -LED tube, cool daylight, cloor temprature 5000-6500K, IP -20 .

Supply of 240V, 50HZ, 1 ph,6 pole, 300 mm sweep, 900 rpm ISI mark, 4 blades heavy duty Exhaust Fan, capacitor type, insulation class-E.

Supply of XLPE insulated, core laid up, thermoplastic tape inner sheathed, armoured and extruded PVC type ST2 outer sheathed, strended aluminium conductor 1.1 KV grade power cables, conforming to IS 7098 ( Part - 1) 2011,and ISI marked of following sizes.

4X 300 sq mm A2XWY/A2XFY cable.

4X 240 sq mm A2XWY/A2XFY cable.

4 X 185 sq mm A2XWY/A2XFY cable.

3.5X 95 sq mm A2XWY/A2XFY cable.

3.5X 70 sq mm A2XWY/A2XFY cable.

3.5X 50 sq mm A2XWY/A2XFY cable.

3.5X 35 sq mm A2XWY/A2XFY cable.

3.5X 25 sq mm A2XWY/A2XFY cable.

Making metalic Road boaring by jack push method bellow 0.75 Mtr including supply of following mm dia G.I. pipe (medium class) including all accessories for laying underground cables as required

100 mm dia

80 mm dia

50 mm dia

Cutting of Concrete Road including supply and laying of following dia G.I. pipe (medium class) in the cutting trench for laying of underground cables inside the pipe etc as required.

100 mm dia

80 mm dia

Providing and laying in position cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) etc as required for repairing of concrete road.

Supply and fixing of 415V, 50Hz, 250A, 36KA, 4 pole, MCCB with Electronics protection unit, Conforms to IS/IEC 60947-2 & IEC 60947-2. Ics=100% Icu, Adjustable Over loads setting 0.4-1.0Xln, adjustable Short ciucuit setting 1.5-10 lr, Adjustable ground fault protection from 0.2 to 1 In & OFF, Inbuilt Instantaneous Protection, In built Display for Current Metering with high accuracy of class 1, Internal Battery with battery measure function Communication Ready via COMM Port, Switchable Thermal Memory, Suitable for Isolation. The MCCB should be operated with supply and fixing of rotary type handle, both side speeder link for termination alongwith supply & installation of suitable size Metal one way enclosures box for MCCB on wall as a main including necessary connections testing and commissioning etc. as required. For input of UPS-2 &3 out put panel

Supply and fixing of 415V, 50Hz, 16KA, 125A FP, MCCB with thermal magnetic pritection unit.Ics=100%Icu, Conforms to IS/IEC 60947-2 & IEC 60947-2. Option for In built or add on module for Earth Leakage Protection, The MCCB should be operated with supply and fixing of rotary type handle, both side speeder link for termination alongwith supply & installation of suitable size Metal one way enclosures for MCCB on wall as a main including necessary connections testing and commissioning etc. as required. For UPS-1 Main bldg-3,UPS-4 MSEG Shed-3, Work shop CNC Vertical room -1

Supply and fixing of, 415V, 50Hz, 63A, 10KA, Four pole, 'C' curve, Din rail mounting MCB, As per IS/MEC 60898-1:2015 alongwith supply & installation of Four pole Metal enclosures for MCB,, to be fixed on wall as a main including necessary connections testing and commissioning etc. as required.

Supply and fixing of, 32A/40A, 10KA, Four pole, 'C' curve, Din rail mounting MCB, As per IS/MEC 60898-1:2015 alongwith supply & installation of Four pole Metal enclosures for MCB, to be fixed on wall as a main including necessary connections testing and commissioning etc. as required.)

Supply and fixing of 80A, 10KA, double pole Din rail mounting MCB, As per IS/MEC 60898-1:2015 , C curve, alongwith supply & installation of TP Metal enclosures for MCB, to be fixed on wall as a main including necessary connections testing and commissioning etc. as required.

Supply and fixing of 415V, 50Hz, 800A, 50KA, Four pole MCCB with Electronics protection unit, Conforms to IS/IEC 60947-2 & IEC 60947-2. Ics=100% Icu, Adjustable Over loads setting 0.4-1.0Xln, adjustable Short ciucuit setting 1.5-10 lr, Adjustable ground fault protection from 0.2 to 1 In & OFF, Inbuilt Instantaneous Protection, In built Display for Current Metering with high accuracy of class 1, Internal Battery with battery measure function Communication Ready via COMM Port, Switchable Thermal Memory, Suitable for Isolation. The MCCB should be operated with supply and fixing of rotary type handle, both side speeder link for termination alongwith supply & fixing of suitable MCCB enclosures with both side cable end box , The enclosure shall be fabricated by 14 SWG CRCA sheet steel with powder coated paint and necessary anti-corrosive tretment and shall be dust and vermin proof construction along with body earthing for termination to be installed on the existing panel including necessary febrication and installation of MS angles/ channel, connections to mainbusbar with suitable Busbar/ copper cable, testing and commissioning etc. as required. The job inclusive of dismentling of old switch fuse unit etc as required.

Supply and fixing of415V 50Hz, 500A, 50KA, Four pole MCCB with Electronics protection unit, ground fault protection, Conforms to IS/IEC 60947-2 & IEC 60947-2. Ics=100% Icu,Adjustable Over loadssetting 0.4-1.0Xln, adjustable Short ciucuit setting 1.5-10 lr , Inbuilt Instantaneous Protection,In built Display for Current Metering with high accuracy of class 1, Internal Battery with battery measure function Communication Ready via COMM Port, Switchable Thermal Memory, Suitable for Isolation. The MCCB should be operated with supply and fixing of rotary type handle, both side speeder link for termination alongwith supply & fixing of suitable 630 MCCB enclosures to be installed on existing Electrical panel /wall as a main including necessary febrication and installation of MS angles/ channel, connections to mainbusbar with suitable copper Bar, testing and commissioning etc. as required.

Supply and fixing of 415V, 50Hz, 500A, 50KA, Four pole MCCB with Electronics protection unit, Conforms to IS/IEC 60947-2 & IEC 60947-2. Ics=100% Icu, Adjustable Over loads setting 0.4-1.0Xln, adjustable Short ciucuit setting 1.5-10 lr, Adjustable ground fault protection from 0.2 to 1 In & OFF, Inbuilt Instantaneous Protection, In built Display for Current Metering with high accuracy of class 1, Internal Battery with battery measure function Communication Ready via COMM Port, Switchable Thermal Memory, Suitable for Isolation. The MCCB should be operated with supply and fixing of rotary type handle, both side speeder link for termination . The MCCB to be installed on existing Electrical panel as a main including necessary hole for febrication and installation, connections to mainbusbar with suitable size copper cable, testing and commissioning etc. as required. The job inclusive of dismentling of old MCCB unit etc as required.

Supply and fixing of surface mounting 6 way (FP MCCB incomer+18 MCB outgoing), TPN DB-VTPN 160, MCCB DBs, IP-43-IK09 alongwith Incomming - 415V, 50 Hz, 160A, 25 kA, Thermal magnetic releases four pole MCCB with rotary type handle, speeder link for termination both side, Out going- A) 63A, 10KA, C curve TP MCB-02 nos B) 32A, 10KA, C curve TP MCB-02 nos C) 32A, 10KA SP MCB - 06 nos. Job including dismentling of old switch fuse unit.

Supply and fixing of 415V, 50 hz, surface/recess mounting 8 way (FP MCCB incomer+24 MCB outgoing), TPN DB-VTPN, MCCB DBs, IP-43-IK09 alongwith Incomming - Four pole MCCB, 25 kA, 160A Thermal magnetic releases, with rotary type handle, both side speeder link for termination - 1 set. Out going- A) 63A, 10KA, C curve TP MCB-03 nos B) 32A, 10KA, C curve TP MCB-02 nos C) 63A, 10KA SP MCB - 03 nos D) 32A, 10KA SP MCB - 06 nos. ( CAMP).

Supply and installation of 415V, 50 hz surface/recess mounting 6 way ( MCCB160+18), TPN DB-VTPN, MCCB DBs, IP-43-IK09 with metal door, alongwith Incomming - 125A MCCB 25 kA, Thermal magnetic releases four pole MCCB with rotary type handle, both side speeder link for termination - 1 set. Out going- A) 63A, 10KA, C curve,TP MCB-01 nos B) 32A, 10KA, C curve,TP MCB-01 nos C) 32A, 10KA SP MCB - 12 nos. (MSEG, North East Shed,Foundary)

Supply and installation of 415V, 50 hz surface/recess mounting 6 way ( 8+18), TPN DB-VTPN MCB DBs, IP-43-IK09 with metal door, alongwith Incomming - - 63A, FP,MCB 10 kA, - 1 set.. Out going- A) 32A, 10KA, C curve MCB-02 nos B) 20A, 10 KA SP MCB - 12 nos. ( Admin Sec)

Supply and installation of 415V, 50 hz surface/recess mounting 4 way ( 8+12), TPN DB-VTPN MCB DBs, IP-43-IK09 with metal door, alongwith Incomming - 63A, FP,MCB 10 kA, - 1 set. Out going- A) 32A, 10KA, C curve TP MCB-02 nos B) 63A, 10 KA SP MCB - 02 no C) 32A, 10 KA SP MCB - 04 nos.

Supply and installation of 415V, 50 hz surface/recess mounting 4 way (FP MCCB incomer+12 MCB outgoing), TPN DB-VTPN, MCCB DBs, IP-43-IK09 with metal door, alongwith Incomming - Four pole 125A MCCB 25 kA, Thermal magnetic releases with rotary type handle, both side speeder link for termination - 1 set. Out going- A) 63A, 10KA, C curve,TP MCB-02 nos B) 32A, 10KA SP MCB - 06 nos.

Supply and fixing of 415V, 50 hz , 400A, 50KA, FP, MCCB with Electronics protection unit, Conforms to IS/IEC 60947-2 & IEC 60947-2. Ics=100% Icu, Adjustable Over loads setting 0.4-1.0Xln, adjustable Short ciucuit setting 1.5-10 lr, Adjustable ground fault protection from 0.2 to 1 In & OFF, Inbuilt Instantaneous Protection, In built Display for Current Metering with high accuracy of class 1, Internal Battery with battery measure function Communication Ready via COMM Port, Switchable Thermal Memory, Suitable for Isolation. The MCCB should be operated with supply and fixing of rotary type handle, both side speeder link for termination alongwith supply & fixing of 630A rated FP MCCB enclosures to be installed on the electrical panel/ wall including necessary febrication and installation of MS angles/ channel, connections to main bus with suitable copper Bar for connection , testing and commissioning etc. as required.

Supply and fixing of 415V, 50 hz , 400A, 50KA, FP, MCCB with Electronics protection unit, Conforms to IS/IEC 60947-2 & IEC 60947-2. Ics=100% Icu, Adjustable Over loads setting 0.4-1.0Xln, adjustable Short ciucuit setting 1.5-10 lr, Adjustable ground fault protection from 0.2 to 1 In & OFF, Inbuilt Instantaneous Protection, In built Display for Current Metering with high accuracy of class 1, Internal Battery with battery measure function Communication Ready via COMM Port, Switchable Thermal Memory, Suitable for Isolation. The MCCB should be operated with supply and fixing of rotary type handle, both side speeder link for termination, to be installed on the existing electrical panel including necessary febrication and installation, connections to main bus with suitable copper Bar/ wire for connection , testing and commissioning etc. as required. The Job inclusive of dismentling of existing MCCB.

Supply Installation Testing and commissioning of compartmentalised Feeder Piller, Metal clad, with suitable foundation and arrengement of cubicle following Panels as per CPWD Electrical spefication front operated outdoor cubical type MV Feeder panel of suitable size, Minium depth 300 mm(D) suitable for operation on 440V, three phase, 4 wire, 50 HZ, AC supply system. The panel shall be fabricated by 14 SWG CRCA sheet steel with necessary anti-corrosive tretment and shall be dust and vermin proof construction along with body earthing Bar(end to end), the Feeder panel suitable for installation on Brick/concrete foundation (Minimum Height - 300 mm from ground level) with the following facilities from 48.1 to 48.4

a) Fire and corrosion resistant coating similar to VIPER FR-1101 applied in two coats with necessary primer.b) Fire retardant DMC/SMC fillings for openings around bus bar near the sectional barriers. c) Facilities for terminals must be insulated Bus connected or suitable Ampere rated control power cabler with speeder link termination system for MCCBs and facility for commom cable allay for out going MCCBs. d) Shall have high mechanical and dielectric strength. e) Double Door (front side) with locking facility,and back side openable facility f) Shall have fire barriers.g) Switch body shall be made of fire retardant materials/heat insulating materials.

h) Shall be painted with heavy coat of anti corrosive paint. I) FP MCCBs shall not be fixed in more than 1 Nos. in each compartment. j) Panel name as well as Feeder name along with Denger Plate to be setup.k) Provition of Bottom cable entry hole. The panel shall consisting of the followings.

Incoming: 415V, 50Hz, 800A, Four pole, 50 kA, MCCB with Electronics protection unit, Conforms to IS/IEC 60947-2 & IEC 60947-2. Ics=100% Icu, Adjustable Over loads setting 0.4-1.0Xln, adjustable Short ciucuit setting 1.5-10 lr, Adjustable ground fault protection from 0.2 to 1 In & OFF, Inbuilt Instantaneous Protection, In built Display for Current Metering with high accuracy of class 1, Internal Battery with battery measure function Communication Ready via COMM Port, Switchable Thermal Memory, Suitable for Isolation. The MCCB should be operated with supply and fixing of rotary type handle and both side speeder link for termination -1 set . Bus Bar: 1250A TPN Aluminium Bus bar (insulated).-1Set. and panel Earth bar as per IS dimention - 1 No. Outgoing: A) Four pole MCCB, 50 kA, 400A Electronics with ground fault protection four pole MCCB (as specified) with rotary type handle and both side speeder Link for termination - 3 set . B) FP MCCB, 25 kA, 160A Electronics with ground fault protection four pole MCCB (as specified) with rotary type handle and both side speeder Link for termination - 1 set

Supply Installation Testing and commissioning of compartmentalised Feeder Piller, Metal clad, with suitable foundation and arrengement of cubicle following Panels as per CPWD Electrical spefication front operated indoor cubical type MV Feeder panel of suitable size, Minium depth 300 mm(D) suitable for operation on 440V, three phase, 4 wire, 50 HZ, AC supply system. The panel shall be fabricated by 14 SWG CRCA sheet steel with necessary anti-corrosive tretment and shall be dust and vermin proof construction along with body earthing Bar(end to end), the Feeder panel suitable for installation on Brick/concrete foundation (Minimum Height - 300 mm from ground level) with the following facilities for - a) Fire and corrosion resistant coating similar to VIPER FR-1101 applied in two coats with necessary primer.b) Fire retardant DMC/SMC fillings for openings around bus bar near the sectional barriers. c) Facilities for terminals must be insulated Bus connected or suitable Ampere rated control power cabler with speeder link termination system for MCCBs and facility for commom cable allay for out going MCCBs. d) Shall have high mechanical and dielectric strength. e) Double Door (front side) with locking facility,and back side openable facility f) Shall have fire barriers.g) Switch body shall be made of fire retardant materials/heat insulating materials. h) Shall be painted with heavy coat of anti corrosive paint. I) FP MCCBs shall not be fixed in more than 1 Nos. in each compartment. j) Panel name as well as Feeder name along with Denger Plate to be setup.k) Provition of Bottom cable entry hole. The panel shall consisting of the followings. (49.1 to 49.5)

Supply and installation of 400 A, Four pole, 50 Hz, ATS with controller protection unit,as per IEC-60947-6-1, operational voltage 440V AC, Rated insulation voltage-1000V, Dielectric Strength 5kV, Impulse withstand voltage-10KV, Making capacity at 440V= 4000A, Breaking Capacity at 440V=3200A, Rated Short circuit making capacity-30KA, switching frequency 120 per hour, Coil voltage 220V, Front operated Vertical mounting Automatic Transfer Switch, terminal capacity copper/ Al cable-240/300 sqmm with inbuilt Enclosure as required. The ATS should be Automatic/ Manual with complete protection and display unit, to be installed on the wall including necessary febrication and fixing of MS angles/ channel. connections, testing and commissioning etc. as required.

Supply and installation of 400 A, Four pole, 50 Hz, ATS with controller protection unit,as per IEC-60947-6-1, operational voltage 440V AC, Rated insulation voltage-1000V, Dielectric Strength 5kV, Impulse withstand voltage-10KV, Making capacity at 440V= 4000A, Breaking Capacity at 440V=3200A, Rated Short circuit making capacity-30KA, switching frequency 120 per hour, Coil voltage 220V, Front operated Vertical mounting Automatic Transfer Switch, terminal capacity copper/ Al cable-240/300 sqmm to be installed on the existing panel including connections with suitable busbar/copper cable, testing and commissioning etc. as required. The job inclusive of dismentling of old ATS.

Supply and installation of 100 A, Four pole, 50 Hz, ATS with controller protection unit,as per IEC-60947-6-1, operational voltage 440V AC, Rated insulation voltage-1000V, Dielectric Strength 5kV, Impulse withstand voltage-10KV, Making capacity at 440V= 1000A, Breaking Capacity at 440V=800A, Rated Short circuit making capacity-12.5KA, switching frequency 120 per hour, Coil voltage 220V, Front operated Vertical mounting Automatic Transfer Switch, terminal capacity copper/ Al cable-35/50 sqmm. to be installed on the wall including necessary febrication and fixing of MS angles/ channel. connections, testing and commissioning etc. as required.

Supply of PVC insulated, Single core Un sheatyhed 1.1 KV grade power copper cables, conforming to IS:694 of following sizes. The control power cable to be connected to the UPS input/output terminals in surface flexible conduit and dressing with cble tie etc as per instruction of Engg in Charge as required.

1.1KV grade, 1X 35 Sq m.m. PVC insulated Un sheathed copper cable.

1.1KV grade, 1X 70 Sq m.m. PVC insulated Un sheathed copper cable.

1.1KV grade, 1X 95 Sq m.m. PVC insulated Un sheathed copper cable.

1.1KV grade, 1X 120 Sq m.m. PVC insulated Un sheathed copper cable.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Supply of XLPE insulated, core laid up, thermoplastic tape inner sheathed, armoured and extruded PVC type ST2 outer sheathed, strended Copper conductor 1.1 KV grade power cables, conforming to IS 7098 ( Part - 1) 2011,and ISI marked of following sizes.

4X 16 sq mm 2XWY/2XFY cable.

4X 10 sq mm 2XWY/2XFY cable.

2X 16 sq mm 2XWY/2XFY cable.

2X 10 sq mm 2XWY/2XFY cable.

3X 6 sq mm A2XWY/A2XFY cable.

Supplying and making end termination with brass compression gland and Copper lugs for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required.

4X 16 sq mm (28mm)

4X 10 sq mm (25mm)

2X 16 sq mm (25mm)

2X 10 sq mm (22mm)

3X 6 sq mm (19.5mm)

Supplying and making end termination with Heavy duty long barrel Copper lugs for following size of PVC insulated copper conductor cable of 1.1 KV grade as required.

1X 35 sq mm (L-8.2mm)

1X 70 sq mm (L-10.5mm)

1X 95 sq mm (L-12.7mm)

1X 120 sq mm (L-12.7mm)

Supplying and fixing 63 A rating, FP, 415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Providing and fixing of ABC Stored pressure Type Fire Extinguisher of 4 kg capacity consist of wielded cylinder, squeeze lever discharge valve fitted with pressure indicating gauge withinternal discharge tube, discharge nozzle, suspension bracket, confirming to IS 13849 duly charged with ISI Marked Mono Ammonium phospate base powder confirming to IS 14609 and pressurised with Nitrogen Gas and with Wall Mount Hook. For Sub each UPS room

M/S ELECTRO EQUIPMENTS TRADING CORPORATION (BID ID -895400)