8897 SPECIAL REPAIRS TO PERIMETER WALL BETWEEN GUARD POST NO 2 AND 3 NEAR MAHINDRA AND MAHINDRA GATE AT COD KANDIVALI COMPLEX AND OTHER SANCTIONED WORKS UNDER GE NORTH MUMBAI

Amount

CIVIL PORTION Demolition of brick work/stone/PCC block masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, PCC coping etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete in ground floors and pavings, not exceeding 15cm thickness (below or above ground level complete all as specified and as directed by Engineer-in-Charge

Material and labour for providing plain cement concrete (1:4:8) type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and as directed by Engineer-in-Charge.

Material and labour for Pre-cast cement concrete block masonry 1:2:4 type B1, (using 20mm graded stone aqggregate), with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed by Engr-in-Charge.

Supply and fix mild steel TMT bars 10mm dia and over, cut to length bent to shape required cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by Engr-in-Charge.

Material and labour for Mild steel TMT bars 5mm dia and over upto and including 10mm dia cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia as in stirrups,spacer,and binder complete all as specified and as directed by Engr-in-Charge

Material and labour for Reinforced cement concrete M-25 (design mix) (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5 m span, complete all as specified and as directed by Engineer-in-Charge.

Material and labour for for Reinforced cement concrete M-25 (design mix) (using 20mm graded stone aggregate) as in foundation, footing, bases of columns, raft and raft beams, plinth beams, mass concrete and similar work etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Reinforced cement concrete M-25 (design mix) (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and sruts, etc. complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Formwork to sides and soffits of floor or roof beams, cantilevers, bressummers, etc. for rough finished flat surfaces of concrete complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Formwork to soffits of suspended slabs such as floor slabs, roof slabs, landings, chajjas and similar work not exceeding 200mm thick for rough finished flat surfaces of concrete complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Formwork to sides of pillars, posts, struts, piers, columns, etc. for rough finished square or rectangular surfaces of concrete complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Providing, cement concrete type B1 1:2:4 Nominal mix (using 20mm graded stone aggregates ) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates,bed blocks, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work for fair finished surfaces complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Mild Steel framed work such as grills , gratings, etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, framed work of garbage bin, barred iron doors, ladders, framed balusters, walk ways, railings, framework of watertanks and similar work conforming to FE 290 Gde 165 etc. complete all as specified and as directed by Engr-in-Charge.

Material and labour for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer with necessary scaffolding / shuttering etc complete all as specified and as directed.

Material and labour for rendering 15 mm thick in cement mortar 1:4 on concrete / brick masonry surfaces and finished even and fair without using extra cement complete all as specified and as directed by Engr-in-Charge.

Material and labour for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour for rendering 5mm thick in cement mortar 1:3 on fair faces of concrete surfaces of ceiling and finished even and fair without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparing new surfaces of wall and applying two coats of cement base paint on wall surfaces complete all as specified and as directed by Engineer-in-Charge and as per manufacturers instructions. Make : Snowcem/Duracem/Aquacem/Berger/Shalimar

Supply and fix galvanized 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provn of galvanized mild steel wire staples or steel pins etc as directed (each line of wire to be measured), complete all as specified and as directed by Engr-in-Charge.

Returning, filling in including spreading, leveling, watering and well ramming soil in layers n.exc 25 cm thick complete all as specified and as directed by the Engineer-in-Charge

Removing excavated soil to a distance exceeding n exc 50m and depositing where directed outside MD land complete all as specified and as directed by Engr-in-Charge.

Taking down cement plaster on brick or stone walls including ceilings etc., including racking out joints, hacking for key scrubbing down with water all as directed.

Demolition of reinforced cement concrete of any description in any position including necessary scaffolding arrangement (reinforcement cut as required to facitate demolition) and removing concrete debris and depositing outside MD land all as specified and as directed by Engineer-in-Charge. Note : Reinforcement obtained from this item shall be handed over to contractor on account of sch of credit

Supply and fix mild steel TMT bars 6 to 8mm dia, cut to length bent to shape required cranking hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by Engr-in-Charge.

Formwork to faces of walls,retaining walls, abutments,parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and as directed by Engr-in-Charge.

Material and labour for reinforced cement concrete 1:1.5:3, type A1, using 20mm graded stone aggregate as in fins, fascias, louvres, parapets, and railings exceeding 60cm in height, newels, balustrade, and the like as in complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of newly plastered wall surfaces and applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge.

E/M PORTION Supply and install high wall split type Air conditioner units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 5 star rating of 1.5 Ton capacity having dual invertor compressor, copper condensor colling coil all as specified and directed. Make: Voltas/LG/Samsung/Blue Star

S & F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps 240 volts complete all as specified and as directed by Engr-in-Charge. Make: Larsen & Toubro/ABB/Siemens/Schneider/Havells

Material and labour for Submain wiring complete with and including 2 runs of 4.0sqmm, single core FRLS, PVC insulated and unsheathed, multistranded, copper conductor cable, single core, 1100 Volts grade drawn through and including PVC conduit, medium grade of size 25mm including accessories such as Tees, Elbows, junction box, reducers etc as required and fixed on walls and 4.0 sqmm PVC multistranded copper conductor cable for earthing and connected to common earth dolly including taking down the existing submain wiring complete all as specified and as directed by Engineer-in-Charge. Make:Plaza/Finolex/Anchor/Havells/Nicco/Polycab/RPG Note :- (i) Two runs of 4.0 sqmm PVC insulated cable and one run of 4.0 sqmm cable for earth and one run of PVC conduit shall be measured as one unit length.

Material and labour for Point wiring complete with PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor conforming to IS-694, 1.5sqmm (nominal area) drawn through and including non metallic rigid PVC casing / capping (ISI marked, not lessthan 20mm wide) and accessories on surface of wall/roof with sunken type pressed steel/welded terminal boxes made out of 1.6mm mild steel sheet, 3mm thick laminated sheet cover for mounting of switches, socket outlets, regulators etc., including provision of PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor 1.5sqmm as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed for the following: Make:Plaza/Finolex/Anchor/Havells/Nicco/Polycab/RPG

Supply and fix switch socket combination 2 in 1 flush type 5 Amps multipurpose complete all as specified and as directed by Engineer-in-Charge. Make : Anchor/Crabtree/Leader/Legrand/Havells

Supply and fix wall mounted fan 400mm sweep including all connections and accessories complete all as specified and as directed by Engineer-in-Charge. Make : Usha Model No STRIKER HI SPEED or equivalent in Bajaj/Crompton Greaves

Vishal Builders

industrial suppliers