Const. of 1 No. Addl. 100 MVA 220/132 KV T/F Plinth, Addl. 220/132 kV Line Bays and allied Civil Works at 220 kV S/S Goraya.

Amount

Earth work in excavation in foundations, trenches etc. In all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches , stacking the excavated soil clear from the edge of excavation and subsequent filling around masonary in 15 cm layers with compaction including diposal of all surplus soil as directed within a lead of 30 metres.

Dismantling brick work tile, masonry or tile lining : In cement .

Dismantling Reinforced cement concrete .

Dismantling roofing Second class mud roofing.

Dismantling cement conglomerate floors 25mm to 50mm thick including concrete base.

Scraping: Bricks dismantled from brick work in lime or cement.

Removing doors and windows together with the dismantling of walls Doors.

Removing doors and windows together with the dismantling of walls Windows

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)

Centering and shuttering for columns (Square or rectangular or poly gonal in plain)

Cement Concrete 1:8:16 with 40mm gauge stone aggregate(mixing by mechanical means using concrete mixer volumetric type) .

Cement Concrete 1:6:12 with stone aggregate 40mm gauge(mixing by mechanical means using concrete mixer volumetric type)

Cement concrete 1:5:10 with stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type

Cement concrete 1:4:8 with stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type

Cement Concrete 1:2:4 with stone ballast or shingle (mixing by mechanical means using concrete mixer volumetric type)

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS : 1791 and vibrated by needle vibrator but excluding steel reinforcement centering and shuttering in superstructure .

Damp proof course 4 cm thick of cement concrete 1: 2: 4 with two coats of bitumen 20/30 penetration at 1.65 kg per sqm laid hot and sanded.

Damp proof course 4cm thick of cement concrete 1:2:4 with water proofing compound as per manufactures guidelines.

Extra for using needle vibrator (where not included in the rates).

First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth .

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth

First class burnt brick work laid in cement sand mortar 1:5 in first storey up to 4 metres above plinth level.

First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth

115mm thick brick wall laid in cement mortar 1:4 without reinforcement in foundation and plinth .

Conglomerate floor 25mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material

Conglomerate floor 50mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material

12.5 mm thick cement plaster 1:3

12.5 mm thick cement plaster 1:4

12.5 mm thick cement plaster 1:5

12.5 mm thick cement plaster 1:6

20 mm thick cement plaster 1:4 in two coat work

20mm thick cement plaster 1:5 in two coat work

Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Painting two or more coats with aluminum paint to give an even shade excluding priming coat

Painting two or more coats with anticorrosive bitumastic Paint to give an even shade

Finishing walls with acrylic smooth exterior paint of required shade with two coats applied@ 1.67 litre/10sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 sqm

Steel work fixed independently without connecting plates including cutting hoisting and fixing in position: R S Joists

Steel work fixed independently without connecting plates including cutting hoisting and fixing in position:FLATS (Labour Rate)

Mild steel requirement for RCC work where not including the complete rate of RCC including bending, binding and placing in position complete in all respects.Above 20mm dia bars (Labour Rate)

Cold twisted detormed (Ribbed/ ToR S teel Bar) Bars (Fe 500 grade as per IS 1786-1985) , for R.C.C works, where not including in the complete rate of RCC including bending and biding placing in position complete. (Labour Rate)

Welding by gas or by electric plant, including carriage to and from workshop etc.

Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete as per technical clause 406 of MORT&H specifications

Brick on end edging Providing and laying of Brick on end edging 6.83cm wide, 11.11cm long and 22.86cm high half brick deep including excavation, refilling and disposal of surplus earth up to 50mtr complete as per Punjab PWD specifications

Boring for hand-pump in clay fitting strainer and pipe.Above 75mm dia bore but not exceeding 100mm.From 0 to 15 m.

Boring for hand-pump in clay fitting strainer and pipe.Above 75mm dia bore but not exceeding 100mm. Exceeding 15 m but upto 30 m.

Boring for hand-pump in clay fitting strainer and pipe.Above 75mm dia bore but not exceeding 100mm. Above 30 m.

Hand pumps lowering pipe in the hole up to 40mm dia.

PVC INSULATED FR COPPER CONDUCTOR CABLES:Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-

overall 4 sq.mm, 1100volts grade

HEAVY GAUGE WELDED CONDUIT PIPES:Supply & erection of Heavy guage welded conduit pipe (ISI marked) as per IS:9537:Part-II for wiring purposes including bends, junction boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications:-

HGW Conduit Pipe 25mm dia. (1.6mm thick) On Surface

Prov./Fixing top post lantern (Gate Light) lantern of Crompton Make

P/F of Steel gate type G-2 5.80 mtr wide as per Arch. Drawing

P & F of MS Tappered washers/Cleats 65X65X19 to 6mm

P & F MS Base Plate 235X220X12mm for T/f Plinth

P&F of MS Angle Nosing 50x50x6mm for T/f plinth

P&F Angle Iron Posts of various sizes and shapes as per PSTCL Drawing.

P & F MS anchor bolt 12.5x300mm

P&F of GI wire netting mesh of 12 gauge 50x 50 mesh 180cms. High fastened with 4 nos. Ms wire rope 6/7 stands 1/6" dia each complete in all respect as per drg no. HW/TB-5635R-2 and Arch Drg. No.3Rs/ Job no. 112/S conforming to is 2721/1974 and 3549/1977 respectively

Cable Racks of various sizes

P&F Angle iron Nozzing 50x50x3 for cable trenches

S&F Trench Cover 2'8"x1'6" R- type, T-1 & T-2 Type

S&F Trench Cover 2'6"x1'9" T-4 Type

S&F Trench Cover 2'2" x2'2" T-3 Type

S&F Trench Cover 3'4"x1'6" T-p Type

P & F of 3BHP NON Clog Pump of 3 BHP 3 phase of Crompton Make

P & F of barbed wire fencing consisting of glavanised steel barbed wire having dia 2.24mm( 2 Ply) barbed with 4 points as per IS 278/1962 i/c all fittings such as U clamp tighting nuts and bolts unrolling and strching complete in 4 rows

Cement Slurry of cement to sand ratio 1:6 with cement content not less than 150kg/100 sqm

S & laying of gravel

Laying PCC Flooring of Cement Concrete 1:5:10 with crushed stone & 25 mm Stone Aggregate.

Cost of Earthfilling

P&F Template

Recovery of bricks

Recovery of brick bat

Recovery of tiles

Recovery of tiles bat

Recovery of steel scrab

Recovery of wooden scrap from Door

Recovery of wooden scrap from Window

Extra Carriage of materials - Cement

Extra Carriage of materials - Steel

Extra Carriage of materials - Fine sand

Extra Carriage of materials & diff. of rates of material- C Aggregate 13.2/12 mm

Extra Carriage of materials & diff. of rates of material- Bricks

Extra Carriage of materials & diff. of rates of material- C Aggregate 11.2/10 mm

Extra Carriage of materials & diff. of rates of material- Coarse Sand

Extra Carriage of materials & diff. of rates of material- Stone metal 40mm

Extra Carriage of materials & diff. of rates of material- Stone metal 53-22.5mm

Bidder Name

Amount in Words

M/s M S BUILDERS (BID ID -672458)

SURJIT SINGH AND SONS (BID ID -672570)

M/s Mukul Kumar Prajapati (BID ID -669211)

SURJIT SINGH AND SONS (BID ID -672570)

M/s Mukul Kumar Prajapati (BID ID -669211)