WELCOME MAINT OF B/R SERVICES TO MD ACCN AND OTM ACCN, REPAIR/MAINT OF SEWAGE LINE, AREA DRAIN ROOF TREATMENT, WATER STORAGE TANK AND REPAIR/MAINT TO INTERNAL ELECTRICAL FITTINGS AND FIXTURES ALONGWITH REPAIRS/SERVICING OF SUMMER/WINTER APPLIANCES AT

Amount

Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm Each complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm n.exc 4 Sqm Each complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm but n. exc. 2.0 Sqm each complete all as specified and directed.

Resecuring or easing & adjusting of shutters without taking down of shutters of any description not exc 2.0 Sqm Each complete all as specified and directed.

S&F factory made solid PVC door frame of size 50 mmx47 mm made out of 5mm thick wood grain printed PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet reinforced MS square tube supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid PVC moulded door shutter 28 to 30 mm thick (stiles, with particle board core) with 2,4 or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specifications and drawing of page no 146 of SSR Part -II complete all as specified and directed.

S&F 2nd class hardwood plain solid, straight chowkat and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints all as specified and directed.

S&F 35 mm thick, 2nd class hardwood glazed and skeleton shutters, open rebated and prepare to receive gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for secruing glass/gauge etc size of member of shutter as specified in SSR Part-I Section 8 Clause 8.20 (a), fitted to chowkats complete all as directed.

S&F 30 mm thick flush shutters solid core construction, with particle board core and ply wood face panels commercial type on both sides complete all as specified and as directed.

S&F 35mm factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part - I) kiln seasoned and chemically pressure treated (35 mm thick with 2nd class HW rail and style) complete all as specified and directed.

S&F butt hinges, cast brass, with mild steel hinge pin, bright polished of size 100 mm complete all as specified and directed.

S&F MS butt hinges medium weight cold rolled of size 100 mm complete all as specified and as directed .

S&F in repair MS butt hinges medium weight cold rolled of size 100 mm complete all as specified and as directed .

S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified directed,

S&F in repair 250 mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified directed,

S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F in repair 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed.

S&F in repair Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed.

S&F in repair stainless steel door stopper with solid stem and rubber end fixed to doors all as specified and as directed including taking down old one.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads area exceeding 1.5 Sqm complete all as specified and directed.

S&F new sheet glass 4.8 mm thick ordinary quality and glazing with oil putty or glazing pins / spring clip in square, rectangle n exc 0.5 Sqm in each pan all as specified and as directed.

S&F in stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed including down old one.

Cutting holes in brick walls exc one brick but not exc two brick in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required ® complete all as specified and directed.

S&F mild steel flat iron as in hold fast for door window frames or chowkat etc. cut to length or drilled hole and fixed with screw etc. complete all as directed grade of steel conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F in repair 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as required and as directed including taking down old one

S&F in repair angular stop cock (chromium plated fancy type) 15 mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handles, screwed both end for iron pipe or for unions complete all as specified and directed including taking down old one.

S&F in repair 15 mm bib tap, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed including taking down old one

S&F in repair tubular towel rail chromium plated 20mm dia 'D' type 600 mm long including brass screws and wooden / plastic cleats complete all as specified and directed including taking down old one.

S&F in repair corner/wall mounted sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed

M&L in repair Vitreous China wash basin, white, flat back, size 550x400 mm including suitable size of CI brackets, brass chromuum plated waste fittings 32 mm dia with long screw shanks and fly nuts, chain and plug and porcelain stopper but including brackets complete all as specified and as directed including taking down old one.

S&F in repair 15mm dia pillar tap fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed including taking out old one.

S&F in repair chromium plated shower roses with swivel joints, 125mm size including fixing to steel pipe or union all as specified and directed.

S&F in repair chromium plated hand shower helth faucet ABB body with 8 mm dia. 1.00 m long CP flexiable pipe 15 mm bore with wall hook complete all as specified and directed including taking down old one. (Make : Jaquar or equivalent)

S&F in repair PTMT grating round of size 100mm dia with waste hole of approved design complete all as specified and as directed including taking out old one.

S&F in repair plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repair 25mm dia Powder coated aluminium curtain rod with catrip type fixed on walls complete all as specified and directed including taking down old one.

Demolition of brick work or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars etc., but excluding dressed stonework and precast concrete articles.

M&L brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM1:4 complete all as specified and directed.

Taking down cement plaster on brick or concrete wall/ceiling etc including racking out joint hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M&L 15mm thick plastering in cement mortar on brick/concrete wall surfaces in CM (1:6) and finishing the surfaces even and smooth without using extra cement complete all as specified & directed.

M&L rendering 5 mm thick in cement mortor 1:3 on concrete surfaces as in ceilings and finishing the surfaces even and smooth without using extra cement complete all as specified & directed.

M&L preparing new surfaces of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed.

M&L preparing new surfaces of ceiling and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L coloured printed glazed ceramic tiles in vertical surface 450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick plastering in cement mortar 1:4 brick or on concrete surfaces of wall and finishing the surfaces fair and even without using extra cement all as specified and directed as in backing of tiles complete all as specified and directed.

S&F Non skid ceramic coloured tiles 7 to 8mm th area of Each tile exceeding 0.06Sqm but not exc 0.11 Sqm in floors etc. set and joined in neat cement slury and pointed in coloured cement to match including screed bed or bedding layer 15 mm thick in cement mortar 1:6 on floors for laying floor finish all as specified and as directed.

M&L vitrified ceramic tiles 10mm thick (Square/rectangular) polished, area of Each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colured cement to matches light shed including screed bed or bedding layer 15 mm thick in cement mortar 1:6 on floors for laying floor finish complete all as specified and as directed.

M&L vitrified ceramic tiles 10mm thick (Square/rectangular) polished, area of Each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colured cement to matches light shed including rendering 10 mm thick in cement mortar 1:4 on wall for laying floor finish complete all as specified and as directed.

M&L PCC 1:2:4 type B1 (20 mm graded stone aggregate) as in bed block for embedding hold fast of doors, window frames or chowkats including necessary form work complete all as all as specified directed.

M&L for oiling and greasing of rolling shutter of any size and any patterrn incl scrubbing down old greasing complete all as specified and as directed.

S&F in repairs Ball bearing for rolling shutters of suitable size all as specified and directed.

Taking down aluminium window/ventilator with side hung, top hung or fixed type, sliding shutter of any description.

S&F anodised aluminium door/ window / ventilator shutters, sliding type with styles, rails, sash bar, sliding frame etc. all are made from anodised aluminium section all are made from anodised aluminium section weighting 0.55 kg / m including necessary jointing cleats, glazing clips, rubber packing, anodised, aluminium snap beadings, screws, aluminium handles, locking system etc complete all as specified and directed.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPD Mrubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge

S&F anodised aluminium grill, having mesh size 100mmx100mm made out 4mm wide and 6 to 7mm thick aluminium section with MS hooks of 6mm round bars two numbers Each side insert into the jambs/cill complete all as specified and directed including taking down old one.

M&L in repair for replacement of old spindle / washer including head for 15 mm dia brass wall mixer / basin mixer complete all as specified and directed.

S&F in repair PVC flush / waste pipe 32/40 mm dia 1150 mm long fixed to walls complete all as specified and as directed including taking down old one.

S&F in repair 15 mm dia PVC connections, 450 mm long with PTMT nuts of suitable size at two end complete all as specified and directed including taking out old one.

S&F in repair Ball valves high pressure of PTMT with PTMT arm & highdensity plastic ball screwed for PVC Connection and fixed in cistern of 25mm dia pipe all as specified and as directed including taking down old one.

S&F in repair 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends in PPR pipe line and fixed including taking down old one.

S&F in repair vitreous China Wash down water closet pan (Pedestal Pattern), white fixed with brass screws with necessary connection with water line and sewer line etc. complete including PVC seat cover for pedestal pan complete all as specified and directed including taking out old one.

Supplying and laying in repair of 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified including taking down old pipe.

M&L CPVC Brass fittings like Brass elbow / Tee / Sockets / Reducing sockets / MBTA / FBTA / Union / Adaptor etc. suitable for fixing with steel pipe 20 mm dia CPVC pipe fixed in wall / floor complete all as specified and directed.

S&F in repair PVC floor trap, setting and jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed including taking out old one.

S&F in repair 100mm diameter of outlet cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) all as specified.

S&F PVC mirror cabinet of size 400 mm x 500 mm with mirror at front view fixed with brass screws and wooden / plastic cleat complete all as specified and directed. (Make :- Prayag or equivalent)

S&F in repair stainless steel kitchen rack of sie 750mm x 750mm x 300mm with 4 shelf made out of 0.8 mm thick sheet fixed with suitable size cromium plated screws complete all as specified and directed including taking out old one

M&L for one coats of distemper oil emulsion including preparation of old plastered surfaces of wall complete all as specified and as directed.

M&L of old decorated plastered or unplastered surfaces of ceiling and applying one coat of oil emulsion distempler complete all as specified and as directed.

M&L for prepration of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L of old decorated plastered or unplastered external surfaces applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings for complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm for soft and loose soil all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40mm graded aggregate in foundations, filling and mass concrete complete all as specified and directed

S&F for Steel work in tubular trusses in roof trusses (framed), trussed, posts, purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified

S&F rolled mild steel section Fe 410 - W (Gde- E- 250) quality "B" framed work as in doors or gates with frame/chowkat with hand made holdfast made from angle of other section with gusset plates, rails braces, flat etc. complete drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings with sliding door bolts etc. (excluding steel covering which shall be measured and paid separately under respective items in this Schedule) and hanging fastening and fixing at any level in high raised bldg complete all as specified and directed by Engineer-in-Charge.

Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, ladders, framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe. 290 Gde-E-165.

M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Cutting into existing manhole, 225 mm bore pipe, for connecting new drains making good to pipe and removing cutting out existing benching for and forming branch channel in cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregates, smooth finish and re-forming benching complete all as specified and as directed

Material and labour including tools and plant required for cleaning of manholes using the cleaning devices as per rule 5 and protective gear and safety devices as per rule 4 of the Prohibition of Employment as Manual scavengers and their Rehabilitation Rules, 2013 and removing blockage if any and removing night soil/ silted sludge/ waste material outside MD land unprohibited by any authority and following the statutory law/ guidelines complete all as specified and as directed.

M&L including tools and plant required for cleaning of blockage of wash basin, floor trap , nahani trap , gully trap (GT) , kitchen, bath etc. (carrying slage ) in any length upto the first manhole by any means (using chemical or any mechanical device) & flushing with water complete all as specified.

M&L including tools and plant required for cleaning of the drain pipes upto 150mm dia by roading from manhole and well flushing with water after cleaning and removing all sludge, dirt and solid contents to a distance n exc 100m and burried in ground (min 30cm below ground level) including necessary excavation returning filling and spreading of bleaching powder complete all as specified.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L brick work with sub class 'B' bricks straight or curved in plan exc 6 mtr mean radius built in CM (1:6) using old size bricks complete all as specified and as directed.

Taking down cement plaster on brick or concrete wall/ceiling etc including racking out joint hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M&L for rendering 15 mm thick on brick or concrete surfaces in CM 1:4 mixed with WPC for final coat, each layer is 10 mm thick finished surface even and smooth without using extra cement complete all as directed.

Material & Labour for applying two coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

Material & Labour for applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

S&F Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line of wire to be measured) complate all as specified and as directed including taking down old one.

Cleaning of 1000 litrs capacity PVC water storage tank by taking down existing inlet and outlet pipes setting aside the tank and cleaning, rubbing down and removing all scales and dirt, mud and any other foreign materials etc from inside complete incl writting letter on PVC tank as TANK CLEANED ON ____ Dt, Month and year complete all as specified and as directed.

Demolition of cement concrete is reinforced (reinforcement cut as required to facilitate demolition) in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and as directed.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L Precast reinforced cement concrete type B-l, 1:2:4 (using 20 mm graded stone aggregate) in slab covers complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for Cement concrete 100mm thick type C1 (1:3:6) 20mm graded stone aggregate as in floor finish concrete surface even and rough finish to receive topping layer complete all as specified and as directed.

M&L screed bed or bedding layer 15 mm thick in cement mortar 1:6 on floors for laying floor finish complete all as specified and as directed.

M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed with grey cement and no pigment and pointed in neat cement slurry in floors all as specified and as directed incl taking down old one

Dismantling of old MS seccon concertina coil of any description from RCC / MS fencing post complete all as specified and directed.

Supply and fix punched tape concertina coil made out of cold drawn unalloyed steel wires of dia 2.6 mm having minimum tensile strength of 1670 N per sqmm as per IS 4454 (Part- 1): 2001 with hot dip galvanized as per practice recommended in IS: 2629 and the coatings shall conform to heavily coated hard variety as per table I of IS: 4826 (weight of Zinc coating 230 gram per sqm minimum) and steel strip of size 19 mm X 0.5 mm with hardness of 137 to 187 VPN and zinc coating of 18 to 20 microns, minimum 610 mm dia of coil when closed, (9 Kg ± 5 %) weight of coil with 50 turns & 129 Nos clips (without handles and spikes) and minimum 580 mm dia when opened upto 6 metres, stretched to 6 metres for 50 turns during installations complete all as specified and as directed.

Supply and fix 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including taking down old one pipe.

S&F 110 mm dia PVC branch piece single, (single Y) ordinary or inverted spigot or socketed type with oval access doors all as specified and directed including taking down old one.

S&F 110mm dia PVC (SWR) junction single (Single T) (equal or unequal) ordinary or inverted spigot or socketed type with oval access doors all as specified and directed including taking down old one.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc including move to store or otherwise complete.

M&L Granite (of any type) 20mm thick work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Dismantling water tanks and removing to store capacity upto 1000 ltr complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tanks capacity 1000ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specified including taking out old one.

Supply and fixed in repairs 600 mm x 450 mm x 75mm thick precast RCPC perforated drain cover slab of 2 MT load bearing capacity with embossing RCPC 2MT complete all as specified and as directed including taking down old unserviceable cover.

Scrapping worn out tarfelt and bituminous compound of water proofing treatment over RCC roof by using wire brush and blow lamps including dismantling cracked/broken PCC (if required sweeping, cleaning washing down to remove dust etc and removing rubbish debris etc to a distance n.exc 50 m from the site (s) complete all as specified & directed.

M&L 20 mm thick (avg min thickness) plastering in cement mortar 1:3, finishing the plastered surfaces even and smooth over cleaned RCC roof. The plastered surface shall be cured properly for ten days by ponding of water over roof mixed with WPC @ 2 - 4% or as specified by the manufacturer.

supply only Integral waterproofing compound for used in plaster of new surface.

M&L for water proofing treatment on cleaned RCC roof comprising with comprising with following specification :-(a) Applying bitumen primer over the plastered surface @ 0.40 Ltr/Sqm by the same membrane manufacturer of density at 25°C, 0.87 to 0.89 kg/Litre and viscocity 70-160 cps. (b) Providing and laying 3mm thick APP (Atactic Polypropylene Polymer) Modified prefabricated five layer, weight not less than 3.50 kg/sqm water proofing membrane, black finished reinforced with non woven polyester matt make as approved over the primer coat. Membrane shall be laid using butane torch and sealing all joints etc all as per Para 11.445 of SSR Part-1. (c) Applying one coat of Aluminium pait @ 0.1 ltr per Sqm over APP lased polymeric membrane complete all as per Manufacturer specification.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (including unscrewing from boards/out-let boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc.), removing materials off the site of work and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

M & L for point wiring with 1.5 sqmm (Nominal Area) FRLS PVC insulated un sheathed multi stranded copper conductor, 1100 Volts grade, in and including PVC casing capping/ concealed conduit (ISI marked) with accessories such as bends, cross, elbow, tees etc. of suitable size including MS pressed steel cadmium plated terminal box not less than 1.6 mm thick for mounting switches, sockets, fan regulators etc and 3 mm thick laminated sheet top cover(ISI marked) including continuous earth wire FRLS PVC insulated unsheathed 1.5 Sq mm(nominal area) copper multistarnded conductor, 1100 Volts grade, connecting to common earth and earth dolly complete as per existing and site requirement and all as specified for one light point/Exhaust fan/ceiling fan controlled by one switch Note : Wiring Color code i.e. Red for Phase, Black for neutral and Green for earth shall be maintained.

All as per item No 2 above but for one light point controlled by two 2 -way switches complete including taking down old unserviceable one all as specified and directed.

All as per item No 2 above but for one 3 pin socket outlet 5 amps on same board all complete including taking down old unserviceable one all as specified and directed.

All as per item No 2 above but for one three pin socket outlet 5 amps on independent board complete including taking down old unserviceable one all as specified and directed.

All as per item No 2 above but for one three pin socket outlet 15 amps on independent board complete including taking down old unserviceable one all as specified and directed.

M & L for submain wiring with 3 run of single core FRLSH , 4 Sqmm ( Nominal area ) PVC insulated , unsheathed,multistanded copper conductor cable ,1100 Volts grade drawn through and including PVC casing-caping / concealed conduit of suitable size , medium grade ( ISI marked ) with all fittings and fixing accessories on roof, wall , ceilings etc complete as per existing and site requirement and all as specified and directed . ( Note : three run of 6 Sqmm cable and one run of PVC casing caping in wall/ceiling be measured as one length.)

M & L for submain wiring with 3 run of single core FRLSH , 6 Sqmm ( Nominal area ) PVC insulated , unsheathed,multistanded copper conductor cable ,1100 Volts grade drawn through and including PVC casing-caping / concealed conduit of suitable size , medium grade ( ISI marked ) with all fittings and fixing accessories on roof, wall , ceilings etc complete as per existing and site requirement and all as specified and directed . ( Note : three run of 6 Sqmm cable and one run of PVC casing caping in wall/ceiling be measured as one length.)

S&F Call bell, multi music type and connection complete including taking down unserviceable one all as specified and as directed.

S&F Modular Bell push switch 6 Amp SP one way complete including taking down unserviceable oneall as specified and as directed.

S & F 6 Amps one way single pole switch modular type complete including taking down unserviceable oneall as specified and as directed.

S & F fan regulator step type electronic flush 2 modular type complete including taking down unserviceable oneall as specified and as directed.

S & F 6 Amps two way single pole switch modular type complete including taking down unserviceable oneall as specified and as directed.

S & F modular metal box 3 way complete including taking down unserviceable one all as specified and as directed.

S & F modular metal box 4 way complete including taking down unserviceable one all as specified and as directed.

S & F modular metal box 6 way complete including taking down unserviceable one all as specified and as directed.

S & F modular metal box 8 way complete including taking down unserviceable one all as specified and as directed.

S & F modular white cover plate with frame 3 way complete including taking down unserviceable oneall as specified and as directed.

S & F modular white cover plate with frame 4 way complete including taking down unserviceable oneall as specified and as directed.

S & F modular white cover plate with frame 6 way complete including taking down unserviceable oneall as specified and as directed.

S & F modular white cover plate with frame 8 way complete including taking down unserviceable oneall as specified and as directed.

S & F modular switch socket combination 16 Amps, 6 pin 3 module complete including taking down unserviceable oneall as specified and as directed.

S & F modular socket outlet 3 pin, 5 amps complete including taking down unserviceable one all as specified and as directed.

M & L Ceiling rose, surface type polycarbonate/ PVC three terminals, for light point/ fan point, conforming to IS, complete all as specified and as directed.

Taking down ceiling/exhaust/ wall mounted fan of any make/model and sweep for ovehauling/servicing, cleaning and lubricating moveable parts with suitable lubricating oil/grease and, testing after completion of the work all as specified and as directed. Note : The accessories such as bearing and capacitor will be measured and paid seperately under relevent item.

M&L for rewinding of ceiling fan of any make/model/sweep including removal of existing burnt winding carefully from slots, cleaning the slots throughly with suitable cleaning agent, applying slot insulation and rewinding with super enamelled copper conductor of same gauge/same number of turns as that of existing and connecting the coil suitable to operate on 230 V, single phase, AC supply, permanent capacitor type, tying the winding and applying air drying the winding throughly and all as specified and directed.

Re fixing only ceiling fan (M.D. supply), serviceable light fitting and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

M&L for rewinding of exhaust fan of 250/300mm including removal of existing burnt winding carefully from slots, cleaning the slots throughly with suitable cleaning agent, applying slot insulation and rewinding with super enamelled copper conductor of same gauge/same number of turns as that of existing and connecting the coil suitable to operate on 230 V, single phase, AC supply, permanent capacitor type, tying the winding and applying air drying the winding throughly and all as specified and directed.

Re-Fixing only exhaust fan (M.D. supply) and connecting up including provision of cable from ceiling rose/connector to fan complete all as specified and directed.

Supply and fix Capacitor 2.5 mfd suitable for ceiling/exhaust fan of any make/model and sweep all as specified and as directed .

Supply and fix Capacitor 4.0 mfd suitable for ceiling/exhaust fan of any make/model and sweep all as specified and as directed .

Supply only Lower and Upper Ball bearing No 6201/6202/6203 suitable for ceiling fan of 1200 mm sweep all as specified and as directed .

M&L for Painting of ceiling/exhaust fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc.

Supply and fix Louver for exhaust fan of existing type including taking down old one all as specified and as directed.

M & L MCB SPN 'C' series 240V,10 KA, 40-63 Amps including taking down complete all as specified and as directed.

M & L MCB SP 'C' series 240V,10 KA, 6-32 Amps including taking down complete all as specified and as directed.

S & F sheet metal DB 12 way double door with 200 Amps rated bus bar single pole with neutral including taking down complete all as specified and as directed. Make: Legrand/L&T/ABB

M&L for MCB protected power unit 6 module flush type with starter, DP MCB & Plug top with indicator including taking down complete all as specified and as directed.

M & L TPN MCB 'C' series 415V, 10KA, 16-32 Amps including taking down complete all as specified and as directed.

M & L TP MCB 'C' series 415V, 10KA, 25 - 63 Amps including taking down complete all as specified and as directed.

Supply and fix double pole and neutral encolsure with a two pin and earth plug with socket complete with one double pole MCB 240V, 20 A including taking down complete and all as specified and as directed.

Supply and fix sheet steel enclosure 4 way TPN DB with 200 amps bus bar with provision for TPN MCB as incomer, double door type all as specified and as directed.

M & L for 1 X 20 watt, 220 V, LED ceiling/wall mounted lighting fixture decorative type with Lamp Lumen not less than 110 lum/watt polycarbonate ,enviornmental friendly ,energy efficient fixed to wall/ ceilling & connecting upto ceiling rose with three core twisted flexible copper conductor cable of suitable size including taking down complete all as specified and as directed.

Supply and fixing recess mounting LED 2ft x 2ft , 36 W light fitting with high performance with fixtures, drivers, holders, connector etc complete as per site requirement including taking down unserviceable one and all as specified and as directed

Servicing of Split/window/cassete type AC unit of capacity 1.5/2.0 TR that includes cleaning of air filters, indoor unit grilss & filters through air blower, cleaning of indoor unit body by wiping out dust etc. with wet cloth, cleaning of blower and condensor fan, cleaning of evaporator & condenser coils, graseing/oiling of motors and all moving marts and checking various parts of AC for proper functioning. Note: (i) All major parts or spares as mentioned below will be measured separately. (ii) Charging of gas to be measured separately. (iii) Rate of all minor spares deemed included in the rate.

M&L for taking down and reinstallation of AC unit of capacity 1.5/2.0 TR including taking down of indoor and outdoor unit alongwith copper pipe , wire, drainage pipe and outdoor unit angle complete and all as specified and as directed

S & Charging R-134A / R-410A refrigerant gas complete all as specified and as directed.

Supply & fixing only Hermeatically sealed unit of compressor for AC of 1.5/2.0 TR capacity including charging gas R-134A/ R-410A complete including taking down all as specified and as directed.

S & F Capacitor combined type 36/50 MFD capacity for 1.5 TR / 2.0 TR split/window type AC complete including taking down all as specified and as directed.

S & F Capacitor combined type 60+2 MFD capacity for 1.5 TR / 2.0 TR split/window type AC complete including taking down all as specified and as directed.

S & F Capilary tube copper 3/8 inch used in 1.5 TR/2.0 TR window/ split type AC as per existing type complete including taking down all as specified and as directed.

S & F Capilary tube copper 5/8 inch used in 1.5 TR/2.0 TR window/ split type AC as per existing type complete including taking down all as specified and as directed.

S & F Capilary tube copper 1/4 inch used in 1.5 TR/2.0 TR window/ split type AC as per existing type complete including taking down all as specified and as directed.

S & F 3 core copper cable FRLS 4.0 sqmm for connection outer to inner unit of split type AC including taking down complete all as specified and as directed

S & F insulation cover and tape for rapping thermally insulated copper tube for 1.5 TR / 2.0 TR capacity including taking down complete all as specified and directed

S&F outdoor AC unit mounting bracket made up of powder quoted MS angle including fixing arrangement and removal of old stand and making good the disturbed surafaces all as specified and as directed.

M&L for filter of existing of AC unit any type/any capacity to any location within the area with testing all as specified and as directed.

M & L for AC outlet drain water pipe with pipe holder and hose clamp complete including taking down and all as specified and as directed .

S & F outdoor Fan blade existing type for window / split type AC including taking down complete all as specified and as directed.

Supply only universal remote for spilit/window type AC as per site/ordered model complete all as specified and as directed by Engr-in-Charge.

Supply and fix condensor coil for spilit/window type AC as per site/ordered model complete all as specified and as directed by Engr-in-Charge.

S & F swing motor for indoor unit 1.5 TR/2.0 TR window/ split type AC as per existing type including taking down complete all as specified and as directed.

S&F Switch Socket combination outlet 2 in 1, 3 pin 5 Amps Flush type complete including taking down unserviceable one all as specified and as directed.

S & F 16 Amps single pole switch modular type complete including taking down unserviceable oneall as specified and as directed.

S&F Socket outlet 2 in 1,3/5 pin 5 and 15 Amps flush type complete including taking down unserviceable one all as specified and as directed.

S&F for thermostat switch of geyser 230V, 30 degree to 90 degree centigrade temp range to be set at 70 degree to 50 degree centigrade suitable for water heater complete including taking down old unserviceable all as specified and as directed

S&F SS connecting pipe set for geyser of best quality of suitable size and length including taking down old one complete all as specified and directed.

S& F Air release valve 15 mm dia for geyser including taking down all as specified and directed.

Taking down water heater (geyser) 25 ltrs capacity for servicing and scraping, cleaning including brazing of inner vessel of the geyser at leakage point to made it leak proof including testing pressure and assembling of all component refixing complete including supply and fixing of minor spare parts all as specified and as directed.

M & L for 1 X 10 watt LED ceiling/wall mounted lighting fixture with Lamp Lumen not less than 100 lum/watt polycarbonate ,enviornmental friendly ,energy efficient fixed to wall/ ceilling & connecting upto ceiling rose with three core twisted flexible 1.5 sqmm PVC copper conductor cable with earthing complete including taking down all as specified and as directed

M&L for taking down and reinstallation of AC unit of capacity 1.5/2.0 TR including taking down of indoor and outdoor unit alongwith copper pipe , wire, drainage pipe and outdoor unit angle complete and all as specified and as directed

Piu Projects (BID ID -3317121)

DUTTA & DUTTA (BID ID -3322386)

S B ENTERPRISE (BID ID -3321756)

KWALITY CONSTRUCTION (BID ID -3320290)

DIPAK ENTERPRISE (BID ID -3319564)

S M ENTERPRISE (BID ID -3320624)

KAY BEE ASSOCIATES (BID ID -3320526)