Kavilipalayam 33/11 KV Indoor SS

CONTROL ROOM BUILDING - Clearing juliflora jungle with uprooting including all labour lead lift etc., complete.

Earthwork excavation in all soils and subsoils, hard stiff clay, black cotton soils, murram, hard red earth, gravel, stone earth etc., complete with an initial lead of 10m and lift of 2 including labour and tools etc., complete for foundation.

Earthwork excavating and depositing on bank with initial lead of 10m & initial lift of 2m in soft disintegrated rock laterite soft rock or kankar not requiring blasting, etc., complete.

Earthwork excavation in medium rock and dense medium rock requiring blasting. (As instructed by the Engineer at site)

Dismantling the brick masonry any met with during execution including labour, lead, lift, T&P, disposal fo rubbish, etc,. Complete

Dismantling the Plain Cement Concrete any met with during execution including labour, lead, lift, T&P, disposal fo rubbish, etc,. Complete

Dismantling the Reinforced Cement Concrete any met with during execution including labour, lead, lift, T&P, disposal fo rubbish, etc,. Complete

Supplying and Filling with filling sand for foundation and basement including cost of filling sand, labour for filling, watering, and well ramming with all lead, lift etc., complete.

Providing antitermite treatment for inside and out side of the building including cost of antitermide chemicals, leads, lift and labour for applying as per standing specification.

Refilling with excavated earth for sewer line, water line, sides of earth pit, man holes etc., including cost of labour and tools , lead, lift, etc., complete

Transporting the balance excavated earth by headload upto 100m including loading and unloading and transporting and filling in low level places of SS complex as directed by Engineer including all leads, lifts, labour, tools etc., complete

Laying plain cement concrete M10 Design mix using 220kg min.cement content 40mm HBGS for foundation and basement with 40mm HBGS including cost of all materials, lead, lift and labour for laying concrete etc.

Assembling of various plinth templates for providing grouting bolts including transporting from one plinth to another, alingning, fixing to corrrect level and dismatling the templete after concreting, including cost of labour, cost of template, lead, lift, etc., complete.

Supplying and fabrication of 20mm dia grouting bolt, including cost of all materials, threading, Nuts, lead, lift, etc., complete.

Laying reinforced cement concrete M25 using 12mm to 20mm HBG metal and 360kg of minimum cement content for various types of work including necessary shuttering, formwork, lead, lift, labour etc.,complete but excluding cost of reinforcement -Column footing

Laying reinforced cement concrete M25 using 12mm to 20mm HBG metal and 360kg of minimum cement content for various types of work including necessary shuttering, formwork, lead, lift, labour etc.,complete but excluding cost of reinforcement-Grade Beam

Laying reinforced cement concrete M25 using 12mm to 20mm HBG metal and 360kg of minimum cement content for various types of work including necessary shuttering, formwork, lead, lift, labour etc.,complete but excluding cost of reinforcement-Flooring Base Concrete

Laying reinforced cement concrete M25 using 12mm to 20mm HBG metal and 360kg of minimum cement content for various types of work including necessary shuttering, formwork, lead, lift, labour etc.,complete but excluding cost of reinforcement-Column up to basement roof

Laying reinforced cement concrete M25 using 12mm to 20mm HBG metal and 360kg of minimum cement content for various types of work including necessary shuttering, formwork, lead, lift, labour etc.,complete but excluding cost of reinforcement-R.C.C. Side Wall

Laying reinforced cement concrete M25 using 12mm to 20mm HBG metal and 360kg of minimum cement content for various types of work including necessary shuttering, formwork, lead, lift, labour etc.,complete but excluding cost of reinforcement-Plinth Beam

Laying reinforced cement concrete M25 using 12mm to 20mm HBG metal and 360kg of minimum cement content for various types of work including necessary shuttering, formwork, lead, lift, labour etc.,complete but excluding cost of reinforcement-GF Column

Laying reinforced cement concrete M25 using 12mm to 20mm HBG metal and 360kg of minimum cement content for various types of work including necessary shuttering, formwork, lead, lift, labour etc.,complete but excluding cost of reinforcement-GF Lintel

Laying reinforced cement concrete M25 using 12mm to 20mm HBG metal and 360kg of minimum cement content for various types of work including necessary shuttering, formwork, lead, lift, labour etc.,complete but excluding cost of reinforcement-GF Sun Shade

Laying reinforced cement concrete M25 using 12mm to 20mm HBG metal and 360kg of minimum cement content for various types of work including necessary shuttering, formwork, lead, lift, labour etc.,complete but excluding cost of reinforcement-Ground floor roof beam

Laying reinforced cement concrete M25 using 12mm to 20mm HBG metal and 360kg of minimum cement content for various types of work including necessary shuttering, formwo

rk, lead, lift, labour etc.,complete but excluding cost of reinforcement-Ground floor roof slab

Laying reinforced cement concrete M25 using 12mm to 20mm HBG metal and 360kg of minimum cement content for various types of work including necessary shuttering, formwork, lead, lift, labour etc.,complete but excluding cost of reinforcement-FF Column

Laying reinforced cement concrete M25 using 12mm to 20mm HBG metal and 360kg of minimum cement content for various types of work including necessary shuttering, formwork, lead, lift, labour etc.,complete but excluding cost of reinforcement-FF Lintel

Supply, fabrication and placing reinforcement for all R.C.C. works including cost of steel and all lead, lift, labour for cutting, bending and placing reinforcement as per plan and tying with binding wire and including cost of binding wire, labour and work at all levels etc., complete.

Laying reinforced cement concrete M25 using 12mm to 20mm HBG metal and 360kg of minimum cement content for various types of work including necessary shuttering, formwork, lead, lift, labour etc.,complete but excluding cost of reinforcement-FF Roof Beam (Head room)

Laying reinforced cement concrete M25 using 12mm to 20mm HBG metal and 360kg of minimum cement content for various types of work including necessary shuttering, formwork, lead, lift, labour etc.,complete but excluding cost of reinforcement-FF Roof Slab (Head Room)

Laying reinforced cement concrete M25 using 12mm to 20mm HBG metal and 360kg of minimum cement content for various types of work including necessary shuttering, formwork, lead, lift, labour etc.,complete but excluding cost of reinforcement-FF Sun Shade

Providing wearing coat of PCC M20 using 3 to 10mm HBG chips 25mm thick including cost of all materials leads, lifts, labour, curing etc., complete as per standard specification.

Plastering with Cement Mortar 1:3, 12mm thick including cost of all materials, leads, lifts, labours, at all floors levels, scaffolding, curing, etc, as per standard specification

Plastering with Cement Mortar 1:5, 12mm thick including cost of all materials, leads, lifts, labours, at all floors levels, scaffolding, curing, etc, as per standard specification

Laying weathering course with PCC 1:2:4 using 6-10mm HBGS for 8cm avg thickness and finished with solar reflective cooling ceramic tiles of approved and branded quality laid in Cement Mortar 1:3, 20mm thick bed mixed with water proofing compound and pointing the tiles with water proofing epoxy powder including cost of all materials and complete as per standard specification

Dadooing wall with glazed tiles of approved colour of required size with 6 mm thick of approved quality laid in CM.1:2, 10 mm thick after scrapping & cleaning the existing wall surface as instructed and pointing with white cement using 0.40Kg/Sqm. including finishing the joint and pointing flush with tiled surface including cost of cement all materials labour curing , leads lifts etc., as per standard specification complete.

Supplying and laying of double charged Vitrified floor tiles for of 10 mm thick for Control room etc., of approved quality and colour laid in CM. 1:3, 20 mm thick and pointing with white cement using 0.40 Kg/m2 including finishing joint and pointing flush with tiled surface including cost of cement, all materials,labour,curing, leads and lifts etc., complete.

Flooring with acid resistant tiles to set in cement mortar 1:3 for battery room including cost of tiles, all lead, lifts, labour for fixing finishing neatly as per standard specification and as directed by the Engineer-in-charge tiles colour and shade to be got approved by the Executive Engineer before use.

Supplying and fixing of rolling shutter with gear arrangements using 18 Gauge M.S. sheet and top cover sheet and providing both side locking arrangements with keys and in addition to provide centre bottom grip lock in floor. Shutter rolling through gear system with smooth performance and with operating handle on both sides, the top shaft is well designed with top roller fitted with hightension springs with special quality of cast iron pulleys and ball bearing arrangements including cost of all materials, leads, lifts, labour and painting with ready mixed red oxide metal primer all conforming to I.S.4330/1957

Supply, fabrication, fixing in position of Collopsible gate for stair case using MS flats, wheels, with red oxide primer coat, etc as per standard specification including cost of all materials, lead,labour etc., complete.

Supplying and fixing UPVC Door and fixing casement doors fabricated from unplasticized polyvinyl chloride (UPVC) sections. The Profile should be three chamber system which provides high insulation properties with outer frame 60mmx55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joint mitred and fusion welded. Windows should be steel reinforced with 25x24x25mm steel reinforced with a thickness of 1mm to have dimensional stability. The sash should be of 60x102mm. The mullion should be of 60x74mm. The profile should have coextruded seals. Hardware: All the hardware like friction stays, handles, locks should be designed so that they cannot be released from outside. Glazing : The window system should be glazed with 5mm plain float flass/6mm bison lam. Installation : The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.

Supplying and fixing UPVC (un-plasticized Polyvinyl Chloride) windows of casement type (open/Sliding) from the profile the size of outer frame 60mmx58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints hould be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lackable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The conn

ecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mmx58mm and shutter profile size of 60x78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.

Supply and fixing of solid PVC door with frame made out of rigid thermo vinyl polymer extruded section of size 62mmx51mm with 2mm wall thickness,shall be reinforced with special polymeric rods of size 255mmx30mmx25mm and with EPDM gaskets along the frame. The door shutter frame of 40mm thickmade out of one piece moulded rigit thermo vinyl polymer extruded section of size 25mmx40mm with 2mm wall thickness is mitered and joined at corners by stainless steel/ aluminium screws. The infill of the door shutter consists of a seamless one piece multichamber hollow rigid thermo vinyl polymer section of size 762mmx35mm with 1mm wall thickness and with prelaminated glossy finish on either side of door shutter of suitable size including cost of all materials lead lift etc., complete.

Building Brick Masonry in C.M 1:6. using IInd sort chamber burnt bricks of size 230x110x70mm at all levels including cost of all required materials, labour, lead, lift, etc., complete as per std specification - Upto Basement Roof Level

Building Brick Masonry in C.M 1:6. using IInd sort chamber burnt bricks of size 230x110x70mm at all levels including cost of all required materials, labour, lead, lift, etc., complete as per std specification- Upto Ground floor roof level

Fabrication, supplying and fixing of MS framed single leaf door with GI sheet 18 gauge using MS angle 40x40x6mm for door frame and MS angle 35x35x5mm for shutter frame with necessary stiffeners using MS flats of size 19x5mm including painting with two coats of enamal paint over one coat of red oxide paint including cost of all materials, labour, lead, lift, etc., complete.

Providing grooves of size 25mm width and 6mm deep on the green plastered surface to alignment and neat finish using extra cement as per direction.

White washing two coats with white cement of approval quality with one coat of primer using white cement for masonry surface including cost of all materials, labour,cleaning the plastered surface, curing, lead, lift, etc., complete.

White washing two coats with white cement over two coats of wall putty of approval quality with one coat of primer using white cement for ceiling surface including cost of all materials, labour,cleaning the plastered surface, curing, lead, lift, etc., complete.

Inside & Outside Wall paint two coats with best quality plastic emulsion of approved colour over a primer coat and two coats putty on cement plastered surface including cost of all materials , leads, lifts, labour , scaffolding etc., complete.

Colour washing two coats with acid proof paint over over two coats of wall putty of approval quality with one coat of primer for battery room inside wall surface including cost of all materials, labour,cleaning the plastered surface, curing, lead, lift, etc., complete.

Painting new steel work with two coats of enameled paint including cost of all materials, lead, lifts, labour, etc, complete.

Building Brick Masonry in C.M 1:6. using IInd sort chamber burnt bricks of size 230x110x70mm at all levels including cost of all required materials, labour, lead, lift, etc., complete as per std specification- In & Above First floor

Supplying,fabricating and fixing in position of M.S Window grills, stair case grills, ladder, etc., at various levels as per approved design of the Engr.including cost of steel and other required materials, labour charges, transportation and fixing, taking grooves in BM/RCC, packing the pockets with CC and painting with one coat metal primer complete.

Supplying,fabricating and fixing in position of M.S Flats at various levels as per approved design of the Engr.including cost of steel and other required materials, labour charges, transportation and fixing, taking grooves in BM/RCC, packing the pockets with CC and painting with one coat metal primer complete.

Supplying,fabricating and fixing in position of M.S chequered plates 8mm thick at various levels as per approved design of the Engr.including cost of steel and other required materials, labour charges, transportation and fixing, taking grooves in BM/RCC, packing the pockets with CC and painting with one coat metal primer complete.

Filling with gravel in basement of the control room building, well consolidation, watering including cost of all materials, labour, lead, lift, etc., complete

Providing 110mm dia PVC down fall pipe of 4 Kg / sq cm. including cost of pipe, door bend, shoe and clamp, labour for fixing in position from the roof top, lead, lift, etc., complete.

Providing and fixing sanitary fitting of European type water closet with flushing tank arrangement of approved quality and of reputed make like Neycer/Parryware make of size 580 x 440mm with P/S trap connecting with necessary PVC accessories including cost of all material, labour, lead, lift, etc., complete.

Providing and fixing sanitary fitting of oriya pattern type water closet of approved quality and of reputed make like Neycer/Parryware make of with P/S trap connecting with necessary PVC accessories including cost of all material, labour, lead, lift, etc., complete.

Providing Horizontal / Vertical decorative mortar bands to required width in CM 1:3, 20mm thick to uniform level and neat finish including cost of all materials, scaffolding, lead, lift etc., complete as per direction and specification.-100mm width

Providing Horizontal / Vertical decorative mortar bands to required width in CM 1:3, 20mm thick to uniform level and neat finish including cost of all materials, scaffolding, lead, lift etc., complete as per direction and specification.-150mm width

Supplying,fabricating and fixing in position of M.S Channels, Angles, etc.,at various levels as per approved design of the Engr.including cost of steel and other required materials, labour charges, transportation and fixing, taking grooves in BM/RCC, packing the pockets with CC and painting with one coat metal primer complete.

Supplying and laying PVC pipe 110 mm dia 6kg / cm2 ISI make for laying the Sewer line including cost of pvc pipe, labour for cutting, laying, fixing, tightening etc.

Supplying and fixing of wash basin of size 550x400 mm with pedestal of approved quality and make with all accessories such as cast iron brackets,32 mm dia CP waste coupling 32 mm B class GI Waste pipe, 15mm dia pvc connecting hose, GM Gate valve, 15 mm dia CP Pillar tap etc., with all accessories, PVC/Fibre glass framed mirror of size 500 x 400 mm,5.5 mm thick and chromium plated towel rod of size 0.6 m and soap tray of size 150x100 mm including cost of all materials, labour, lead, lift, etc., complete.

Supplying and fixing of 1000 lit capacity sintex tank of approved quality and make including cost of materials, labour for fixing, lead, lift, etc., complete.

Supplying of floor mat- 4 Nos. (1000x 500 mm) for entrance and office, water bucket with mug in large and small sizes each - 2 sets of approved make and quality including the cost of all materials, lead, lift, etc., complete.

Supplying and laying 32mm dia PVC pipe of 10kg/sqcm to with stand the pressure of ISI make including cost of PVC pipe, coupling, labour for cutting, laying, fixing in position, labour, lead, lift etc., complete for water supply arrangements.

Supplying and laying 25mm dia PVC pipe of 10kg/sqcm to with stand the pressure of ISI make including cost of PVC pipe, coupling, labour for cutting, laying, fixing in position, labour, lead, lift etc., complete for water supply arrangements.

Supplying and fixing in position of 32mm dia GM gate value of approved quality and of reputed make including cost of all materials,specials, labour, lead, lift, etc., complete.

Supplying and fixing in position of 25mm dia GM gate value of approved quality and of reputed make including cost of all materials,specials labour, lead, lift, etc., complete.

Supplying and laying of 50mm dia PVC pipe of 6kg/sqcm to with stand the pressure of ISI make including cost of PVC pipe, coupling, labour for cutting, laying, fixing in position, labour, lead, lift etc., complete for water supply arrangements.

Supplying and fixing of CP SD tap in bath room with required specials including cost of all materials, labour, lead, lift, etc., complete.

Supplying and fixing of 100x75mm floor trap (stainless steel grating) in bath room with required specials including cost of all materials, labour, lead, lift, etc., complete.

Supplying and providing wiring for lights, fans,Duct lights etc., using with 2.5 sq.mm PVC insulated copper wire for phase and neutral and 1.5 sq.mm PVC insulated copper wire for looped earthing in 25mm rigid conduit .PVC accessories with Metal Box in flush with wall with 5A Modular Switch Legrand/Crabtree/MK with Suitable Base plate, Cover plate for PVC light point / Tube light paint / Buzzer inclluding cost of all materials lead, lift, etc., complete.

Wiring with 2 x 2.5 sq.mm. PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with suitable TW switch box with 3mm thick hylem sheet cover for 5A 3 pin non inter locking wall socket with 5A flush type switch with continuous earth wire connection and making good of the concealed portion with suitable colour for concealed PVC plug point.

Wiring with 2 x 4 sq.mm PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with suitable TW switch box with 3mm thick hylem sheet for 15A 3 pin non inter locking wall socket with 15A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed power plug point.

Supply and fixing of 20W 4' LED Tube light fitting complete with TW round blocks on wall or ceiling withPVC unsheathed copper leads from terminals to the fitting including cost of all materials, labour, lead, lift etc., complete, as per standard specification.

Supply and fixing of 2x4'20 W LED bulb with twin type mirror optic suspension type fitting (Philips/Crompton/ Wipro) complete with louvers cover complete with copper chokes and condensor with conduit pipe suspension, with PVC unsheathed copper leads from the terminals to the fittings with flu. tubes including cost of all materials, labour, lead, lift etc., complete as per standard specification.

Supply and fixing 11W LED bulb with battern holder including cost of all materials, labour, lead, lift etc., complete as per standard specification.

Supply and fixing of W.T bulk head fitting (Philips/Balaji/K.Lite/Crompton Greaves) suitable for 11W LED bulb with guard including cost of all materials, labour, lead, lift etc., complete,as per standard specification.

Supplying and fixing of 375mm (15') sweep heavy duty AC Exhaust fan with MS/Fibre louvers shutters arrangements of approved ISI quality complete with necessary wall opening and making good of the wall

Supplying and fixing of 1400mm (56") AC ceiling fan complete with stepped electronic 300w regulator with 1.0m down rod including fan clamp with side plates and cross arm of size 450mm including cost of all materials, labour, lead, lift etc., complete,as per standard specification.

Supply and fixing of 30W LED street light fitting with LED of make Philips/Havells/Equivalent with 25mm dia GI pipe with 1 No GI bend on wall with PVC unsheathed Copper leads from terminal to the fitting with MS clamp

Supply and fixing of horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure with 40A 4 pole MCB as incoming and 12 Nos. 6A to 32A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI mark including cost of all materials, labour, lead, lift etc., complete. as per standard specification.

Earthing as per PWD standard with an earth electrode of 2 mtr. Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work including cost of all materials, labour, lead, lift etc., complete,as per standard specification.

Supplying and providing wiring with 2 runs of 4 sq.mm PVC insulated copper wire alongwith 2.5 sq.mm PVC insulatd copper wire for earthing inside the PVC rigid conduit not less than 25mm dia and 2mm thickness including cost of all materials, labour, lead, lift etc., complete. as per standard specification.

Supply and fixing of 32A TPNMC switch on suitable angle iron frame work with MS cable entry box with earth connection including cost of all materials, labour, lead, lift etc., complete,as per standard specification.

Supply and Run of 4 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed FRLS copper wire and making good of the concealed portion with suitable colour.

Supplying and fixing of RCCB safe trip of appd LEGRAND , ISI make , 32amps 30 MA with suitable box including cost of all materials labour, lead, lift, etc., complete as per standard specification. (As instructed by the engineer at site)

Labour charges for writing Name Board/Slogans over the plastered surface wall including cost of paint & all materials, labour, lead, lift, etc., complete.

Supplying and fixing of digital LED Wall Clock of approved quality such as Ajantha / Seiko/ Citizen etc including transport, fixing charges etc complete.

Supplying and fixing,testing & comissioning of earth electrode as per specification. (AC, DC & Charger) 1.40mm GI Earth Pipe =3 mts, 2.600x450x25mm RCC ring with cover=1 No, 3.Charcoal =15kgs, 4.Salt =10 kgs, 5.Bentonite powder =50 Kgs

Supplying and laying PVC Pipe Specials- ISI make for laying the Sewer line including cost of pvc specials, labour for cutting, laying, fixing, tightening etc. -110mm dia PVC Bend

Earthwork excavating and depositing on bank with initial lead of 10m & initial lift of 2m in soft disintegrated rock laterite soft rock or kankar not requiring blasting, etc., complete.

Earthwork excavation in medium rock and dense medium rock requiring blasting. (As instructed by the Engineer at site)

PCC 1:2:4, using 20mm HBG machine crushed metal for foundation padding concrete without form work including cost of cement and all materials, curing, lead, lift etc.,complete.

PCC 1:2:4, using 20mm HBG machine crushed metal for foundation padding concrete with form work including cost of cement and all materials, curing, lead, lift etc.,complete.

RCC 1:1.5:3 using 12 to 20 mm HBG machine crushed metal for plinth with formwork including cost of cement all materials,labour,lead lift, curing etc., complete. - With form work

Plastering with CM 1:4, 12mm thick for structure portion including cost of all materials, labour, lead, lift etc., complete.

Supplying and fabricating and placing in position of MS / RTS steel reinforcement for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost of all materials, lead, lift, labour, cost of binding wire, etc., complete.

Colour washing two coats out side walls by using Exterior emulsion paint over a primer coat of approved quality with suitable colour including cost of all materials, labour, lead, lift, curing etc., complete.

Supplying and laying PVC Pipe Specials- ISI make for laying the Sewer line including cost of pvc specials, labour for cutting, laying, fixing, tightening etc. -110mm dia PVC TEE

Earthwork excavating and depositing on bank with initial lead of 10m & initial lift of 2m in soft disintegrated rock laterite soft rock or kankar not requiring blasting, etc., complete.

Supplying and Filling with filling sand for foundation and basement including cost of filling sand, labour for filling, watering, and well ramming with all lead, lift etc., complete.

Supply and fixing of MS rails (90 LBS) in transformer plinth to required level and alignment as directed by the engineer incharge at site with all labour lead lift etc complete

Refilling with excavated earth including cost of labour and tools & plants , lead, lift, etc., complete

Transporting the balance excavated earth to dumping ground including loading and unloading and transporting as directed by Engineer including all leads, lifts, labour, tools etc., complete

Supplying and laying PVC Pipe Specials- ISI make for laying the Sewer line including cost of pvc specials, labour for cutting, laying, fixing, tightening etc. -100mm dia PVC Cowl 3.3m Ht

TRANSFORMER PLINTH - Earthwork excavation in all soils and subsoils, hard stiff clay, black cotton soils, murram, hard red earth, gravel, stone earth etc., complete with an initial lead of 10m and lift of 2 including labour and tools etc., complete for foundation.

Supply, fabrication and placing reinforcement for all R.C.C. works including cost of steel and all lead, lift, labour for cutting, bending and placing reinforcement as per plan and tying with binding wire and including cost of binding wire, labour and work at all levels etc., complete.

FIRE PROTECTION WALL - Earthwork excavation in all soils and subsoils, hard stiff clay, black cotton soils, murram, hard red earth, gravel, stone earth etc., complete with an initial lead of 10m and lift of 2 including labour and tools etc., complete for foundation.

Laying reinforced cement concrete M25 using 12mm to 20mm HBG metal and 400kg of minimum cement content for various types of work including necessary shuttering, formwork, lead, lift, labour etc.,complete but excluding cost of reinforcement.-Base Concrete / Raft

Laying reinforced cement concrete M25 using 12mm to 20mm HBG metal and 400kg of minimum cement content for various types of work including necessary shuttering, formwork, lead, lift, labour etc.,complete but excluding cost of reinforcement.-R.C.C. Column/Beam

ROAD CROSSING CULVERT - Earthwork excavation in all soils and subsoils, hard stiff clay, black cotton soils, murram, hard red earth, gravel, stone earth etc., complete with an initial lead of 10m and lift of 2 including labour and tools etc., complete for foundation.

Earthwork excavating and depositing on bank with initial lead of 10m & initial lift of 2m in soft disintegrated rock laterite soft rock or kankar not requiring blasting, etc., complete.

Refilling with excavated earth for sewer line, water line, sides of earth pit, man holes etc., including cost of labour and tools , lead, lift, etc., complete

Transporting the balance excavated earth by headload upto 100m including loading and unloading and transporting and filling in low level places of SS complex as directed by Engineer including all leads, lifts, labour, tools etc., complete

Transporting the balance excavated earth to dumping ground including loading and unloading and transporting as directed by Engineer including all leads, lifts, labour, tools etc., complete

Supplying and Filling with filling sand for foundation and basement including cost of filling sand, labour for filling, watering, and well ramming with all lead, lift etc., complete.

Laying reinforced cement concrete M25 using 12mm to 20mm HBG metal and 400kg of minimum cement content for various types of work including necessary shuttering, formwork, lead, lift, labour etc.,complete but excluding cost of reinforcement.-Base Concrete / Raft

Laying reinforced cement concrete M25 using 12mm to 20mm HBG metal and 400kg of minimum cement content for various types of work including necessary shuttering, formwork, lead, lift, labour etc.,complete but excluding cost of reinforcement.-R.C.C. Side Wall

Laying reinforced cement concrete M25 using 12mm to 20mm HBG metal and 400kg of minimum cement content for various types of work including necessary shuttering, formwork, lead, lift, labour etc.,complete but excluding cost of reinforcement.-Pre cast slab with transportation and laying

Supplying and fabrication and placing in position M.S/ RTS steel reinforcement for all RCC works including cutting, bending, tying and fixing in position as per plan, including cost of all materials, lead, lift, binding wire etc., complete.

Plastering with C.M 1:4, 12mm thick with water proof compound 1kg/bag of cement for masonry/concrete elements including cost of all materials, labour, lead, lift, curing, scaffolding, etc., complete.

Laying reinforced cement concrete M25 using 12mm to 20mm HBG metal and 400kg of minimum cement content for various types of work including necessary shuttering, formwork, lead, lift, labour etc.,complete but excluding cost of reinforcement-R.C.C. Side Wall

Plastering with C.M 1:4, 12mm thick for structure portion including cost of all materials, labour, lead, lift, etc., complete.

BORE WELL - Drilling bore well of 150mm dia 6” in all soils, hard rock etc., including transporting of machineries with equipments and all necessary T & P’s labour, etc.,complete as per specification -Upto 100 Mts

Colour washing two coats with Exterior emulsion paint over a primer coat of approved quality and colour including cost of all materials, labour, lead, lift, scraping loose particles, curing, etc., complete.

Providing, laying, spreading and compacting graded stone aggregates for Wet Mix Macadam including premixing the materials with water at OMC in mechnanical mix plant, conveyance of mixed materials by tipper to site, laying in uniform layers using pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory soil compactor to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete.

PCC 1:3:6, using 40mm HBG machine crushed metal including cost of all materials, labour, curing, side formwork, lead, lift etc.,complete.

Colour washing two coats with Exterior emulsion paint over a primer coat of approved quality and colour including cost of all materials, labour, lead, lift etc., complete.

Laying reinforced cement concrete M25 using 12mm to 20mm HBG metal and 400kg of minimum cement content for various types of work including necessary shuttering, formwork, lead, lift, labour etc.,complete but excluding cost of reinforcement.-Pre cast slab with transportation and laying

Supplying and fabrication and placing in position M.S/ RTS steel reinforcement for all RCC works including cutting, bending, tying and fixing in position as per plan, including cost of all materials, lead, lift, binding wire etc., complete.

Plastering with C.M 1:4, 12mm thick with water proof compound 1kg/bag of cement for masonry/concrete elements including cost of all materials, labour, lead, lift, curing, scaffolding, etc., complete.

SUPPORT STRUCTURE - Earthwork excavation in all soils and subsoils, hard stiff clay, black cotton soils, murram, hard red earth, gravel, stone earth etc., complete with an initial lead of 10m and lift of 2 including labour and tools etc., complete for foundation.

RCC CABLE DUCT- Earthwork excavation in all soils and subsoils, hard stiff clay, black cotton soils, murram, hard red earth, gravel, stone earth etc., complete with an initial lead of 10m and lift of 2 including labour and tools etc., complete for foundation.

Supply and erection of 180mm (7”) dia rigid PVC casing pipe, having 6kg/cm² including cost all materials,lead, lift, re-boring the holes to required depth etc., complete with cover at the top of the bore well.

PCC 1:2:4 using 12 to 20 mm HBG machine crushed metal including cost of all materials,labour,lead lift, curing etc., complete. - PCC Curb wall with formwork

Supply and erection of 3 phase 30/32 Amps ICTP switch with fuse arrangements to suit the compressor with cost of all materials, labour, lead and lift etc., complete in all respects.

Supply and erection of 3 HP sumersible pump of any reputed make having ISI make as approved by the Board Engineer at site to pump water to a height of 300mts and delivery unit with foot valve, including cost of all materials, labour, erection charges, 3 HP pump, 400/440V L&T make starter to suit the sumersible motor including the cost of all materials, lab

our, lead and as per the instruction of Engineer in charge at site complete in all respects.

Charges for geophysical survey for invetigation of borewell point at various location in the SS site

Supply and erection of 32mm dia UPVC pipe having ISI mark and as per IS 4985 2000 (10 Kg/CM²) in and outside of the bore well including cost of all materials, labour, lead,lift etc., complete.

Brick Masonry in C.M 1:6. using IInd sort chamber burnt bricks of size 9"x4.5"x3" at all levels including cost of all required materials, labour, lead, lift, etc., complete as per std specification.

Supplying and laying of 4 core 6 Sq mm power cable from nearest power point to 3 HP motor including earth work excavation ,laying power cable in the pit and top covered with country bricks and refilling with excavated earth, lead. lift ,etc. complete

Supplying and fixing of 1HP Mono block pump with all accessories of approved quality and of reputed make including cost of all materials, labour for fixing in position, 25A DP switch, lead, lifts, etc., complete.

PCC 1:3:6, using 40mm HBG machine crushed metal for foundation padding concrete including cost of cement and all materials, curing, lead, lift, centering, etc.,complete.

PCC 1:2:4 using 12 to 20 mm HBG machine crushed metal for plinth with formwork including cost of cement all materials,labour,lead lift, curing etc., complete. - PCC wall with form

supplying, fabrication, galvanising and fixing of GI angles for fence post including cost of all materials lead and lift etc., complete

Supplying and laying of 300mm RCC non pressure spun pipe for the strom water drain including cost of all materials, labour charges, laying, jointing etc., complete as per standard specification.

RCC 1:1.5:3 using 12 to 20mm HBG metal with formwork including cost of all materials, lead, lift, curing, etc., complete but excluding cost of steel reinforcement.( By using mixer machine and vibrators) - CC Road

Supplying and laying of chain link fencing of 2" x 2" of 10 Gauge galvanised iron for 1.8m height including cost of all materials,labour, lead, lift etc complete as directed by the engineer at site.

Dismantling Brickwork, RR, other masonry elements in cement mortar including labour, tools, disposal of rubbish, etc., complete

Laying plain cement concrete M10 Design mix using 220kg min.cement content including cost of all materials, lead, lift and labour for laying , curing, etc. complete

Brickwork in CM 1:5 using chamber bricks for wing wall including cost of all materials,labour,lead,lift,curing, etc complete

Laying reinforced cement concrete M25 using 12mm to 20mm HBG metal and 400kg of minimum cement content for various types of work including necessary shuttering, formwork, lead, lift, labour etc.,complete but excluding cost of reinforcement.-Pre cast slab with transportation and laying

Supplying and fabrication and placing in position M.S/ RTS steel reinforcement for all RCC works including cutting, bending, tying and fixing in position as per plan, including cost of all materials, lead, lift, binding wire etc., complete.

Plastering with C.M 1:4, 12mm thick with water proof compound 1kg/bag of cement for masonry/concrete elements including cost of all materials, labour, lead, lift, curing, scaffolding, etc., complete.

RCC 1:1.5:3, using 12-20 mm HBG machine crushed metal for gate pillar footing with out form work including cost of all materials and labour, lead, lift, curing, etc., complete but excluding cost of steel reinforcement.

RCC 1:1.5:3, using 12-20 mm HBG machine crushed metal for gate pillar with form work including cost of all materials and labour, lead, lift, curing, etc., complete but excluding cost of steel reinforcement.

Supplying of MS grill gate and MS wicket gate of approved design and as per direction of Engineer at site, including cost of all materials, labour, T&P, lead, lift, Painting with two coats of approved enamel paint over one coat of red oxide primer paint, etc, complete.

YARD FORMATION - Supplying and filling of gravel in the yard area, labour for filling, watering and consolidation, including cost of all materials, lead, lifts, labour, etc, complete.

Supply of Steel "S" type Chair with arm. Make:TANSI - 1 No.

Supply of Steel Half Bench with "L" top of size 36"x15"x18" Make:TANSI

Supply of Steel Stool of size 15"x15"x18" H Make:TANSI

Supply of Steel Side Rack "O" Type with 4 shelves including Top and bottom forming 3 compartments of size 36"x33"x12" (Make:TANSI)

Supply of Steel senior plain cupboard with 4 shelves forming 5 compartments of size 78"x36"x19" Make:TANSI

Supply of Plastic Arm Chair

ENTRANCE GATE - Earth work excavation in all types of soils with an initial lead of 10m and lift of 2m, complete.

Supply and fixing of Entrance gate light with LED bulb fittings including cost of all materials, labour, point wring, etc., complete

Providing projected border in C.M 1:3, 10cm width for masonry/concrete elements including cost of materials,labour,lead,lift, curing, etc., complete

Supplying and fixing inposition of GM gate valve best quality including cost of all special fixtures lead, lift,etc., complete. - 32 mm dia gate valve

Supply and erection of 20 mm PVC Tap for earth pits.

Supplying and fixing of 65mm dia GI pipe 'B' class of approved ISI mark for road crossing to protect the waterline including cost of pipe, labour, lead, lift, labour, etc., complete.

FURNITURES - Supply of Steel clerks table with single drawer and cabinet on the right side of size 42"x24"x30" ( Make:TANSI)

Earthwork excavation in all soils and subsoils, hard stiff clay, black cotton soils, murram, hard red earth, gravel, stone earth etc., complete with an initial lead of 10m and lift of 2 including labour and tools etc., complete for foundation.

Supplying and filling of Stone Dust to required thickness with all lead and lift, including cost of all materials, labour, T&P, etc., complete.

Supply and fixing of MS rails (90 LBS) in transformer plinth to required level and alignment as directed by the engineer incharge at site with all labour lead lift etc complete

Refilling with excavated earth including cost of labour and tools & plants , lead, lift, etc., complete

Providing and laying PVC high density pipe including cost of all materials viz.bend, labour for cutting threading fixing and tightening, etc., complete. -20 mm dia PVC 10 kg

Supplying and filling of M-sand in foundation, watering and consolidation as per standard spec, including cost of all materials, labour, lead, lift, etc., complete.

Laying plain cement concrete M10 Design mix using 220kg min.cement content including cost of all materials, lead, lift, labour for laying, curing, etc., complete.

Laying reinforced cement concrete M25 using 12mm to 20mm HBG metal and 400kg of minimum cement content for various types of work including necessary shuttering, formwork, lead, lift, labour etc.,complete but excluding cost of reinforcement-Base Concrete / Raft

Laying reinforced cement concrete M25 using 12mm to 20mm HBG metal and 400kg of minimum cement content for various types of work including necessary shuttering, formwork, lead, lift, labour etc.,complete but excluding cost of reinforcement.-Pre cast slab with transportation and laying

Laying reinforced cement concrete M25 using 12mm to 20mm HBG metal and 400kg of minimum cement content for various types of work including necessary shuttering, formwork, lead, lift, labour etc.,complete but excluding cost of reinforcement-R.C.C. Side Wall

METAL SPREADING - Supplying and filling of 20 mm HBG metal to required thickness with all lead and lift, including cost of all materials, labour, T&P, etc., complete.

Earthwork excavating and depositing on bank with initial lead of 10m & initial lift of 2m in soft disintegrated rock laterite soft rock or kankar not requiring blasting, etc., complete.

Supplying and filling of Stone Dust to required thickness with all lead and lift, including cost of all materials, labour, T&P, etc., complete.

Providing and laying PVC high density pipe including cost of all materials viz.bend, labour for cutting threading fixing and tightening, etc., complete. -20 mm dia PVC 10 kg

Laying reinforced cement concrete M25 using 12mm to 20mm HBG metal and 400kg of minimum cement content for various types of work including necessary shuttering, formwork, lead, lift, labour etc.,complete but excluding cost of reinforcement-Pre cast slab with transportation and laying

Supplying, laying and jointing of PVC pipes of approved brand and ISI quality for waterline, sewerling, and rain water downfall pipe etc., including cost of all materials and GI specials, fixing the pipes over BM/CC surfaces by taking grooves and fixing wooden plugs, screws firmly with special clamps as directed.

Supplying and fabrication and placing in position M.S/ RTS steel reinforcement for all RCC works including cutting, bending, tying and fixing in position as per plan, including cost of all materials, lead, lift, binding wire etc., complete.

Plastering with C.M 1:4, 12mm thick with water proof compound 1kg/bag of cement for masonry/concrete elements including cost of all materials, labour, lead, lift, curing, scaffolding, etc., complete.

PCC 1:2:4 using 12-20mm HBS metal for support structures concrete without formwork including cost all materials, lead, lifts, labour, curing etc complete

PCC 1:2:4 using 12-20mm HBS metal for support structures concrete with formwork including cost all materials, lead, lifts, labour, curing etc complete

SGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only

CGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only

Inter-state GST @18% for other than Tamil Nadu supplier. If the contractor is within Tamil Nadu may be quoted as "0" only