Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.7 LAccepted-AOC | L1 | Accepted-AOC Lowest Biddr | |
| 2 | L2₹17.9 L+₹84,843 (4.97%)Rejected-Finance 41B 1H JAYANTIPUR PREETAM NAGAR ALLAHABAD | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹19.2 L+₹2.1 L (12.3%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹22.8 L+₹5.7 L (33.2%)Rejected-Finance 529 RAM BAGH ROAD AMBALA CANTT 133001 | AMBALA CANTT | AMBALA | HARYANA | 133001 | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹34.4 L+₹17.3 L (101.2%)Rejected-Finance 145H 2G AQAMA MODEL APARTMENT LUKERGANJ PRAYAGRAJ UTTAR PRADESH | PRAYAGRAJ | UTTAR PRADESH | 211001 | L5 | Rejected-Finance Other than lowest bidder |
Tender Value
₹32 L
EMD Value
₹64,000
Closing Date
18 Aug 2022, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Bamrauli
GE (AF) Bamrauli
REPAIRS TO ALL TYPES OF WOODEN CHAIRS TABLES RIFLE RACKS SIDE BOARD BOOK CASE TEAPOY PEG TABLE TABLE CENTRE TABLE DINING ETC FOR OTM AND MD ACCN UNDER GE(AF) BAMRAULI
2022_MES_530005_3
8722/E8
Open Tender
Civil Works
Works
270 days
GE (AF) Bamrauli
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE (AF) Bamrauli
₹64,000
26 Sept 2022
29 Jul 2022
19 Aug 2022
29 Jul 2022
18 Aug 2022
5 Aug 2022
Amount
REPAIR TO CHAIR WOODEN BOTTOM / CHAIR BKB (FD- 285)
Material and labour in replacement for seat of chair wooden bottom, made out of 6mm thick commercial plywood, BWR grade, (perforated in the centre) fixed with 12 Nos screws of suitable size, all as per drawing and as specified and directed by the Engineer-in-Charge
Material and labour in replacement for damaged front leg of chair wooden bottom with new leg of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.
Material and labour in replacement for damaged rear leg of chair wooden bottom with new leg of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.
Material and labour in replacement for damaged back rest of chair wooden bottom with new back rest of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.
Material and labour in replacement for damaged side rail of chair wooden bottom with new side rail of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.
Material and labour in replacement for damaged front rail of chair wooden bottom with new front rail of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge .
Material and labour in replacement for damaged back rail of chair wooden bottom with new back rail of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge .
Material and labour in replacement for damaged stiffener of chair wooden bottom with new stiffener of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.
Material and labour for preparation of old/new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed.
REPAIRS TO CHAIR EASY (FD - 229)
Material and labour in replacement for damaged front leg of Chair easy with well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge
Material and labour in replacement for damaged rear leg of Chair easy with well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge.
Material and labour in replacement for damaged arm-rest of Chair easy with well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge .
Material and labour in replacement for damaged fillet for canning of seat and back of Chair easy with well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge .
Material and labour in replacement for damaged rail of seat and back of Chair easy with well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge.
Material and labour for preparation of old/new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed.
REPAIR TO CHAIR DINING (FD-279)
Material and labour in replacement for damaged front leg of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.
Material and labour in replacement for damaged rear leg of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge
Material and labour in replacement for damaged back rest of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.
Material and labour in replacement for damaged stiffener of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.
Material and labour in replacement for damaged side rail of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.
Material and labour in replacement for damaged front rail of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.
Material and labour in replacement for damaged back rail of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.
Material and labour in replacement for damaged fillet for canning of seat of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge .
Material and labour in replacement for unserviceable seat of chair dining (Make- AMKO or as approved by GE) to be required shape & size all as per drawing and as specified and directed by the Engineer in Charge .
Material and labour for preparation of old/new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed.
REPAIR TO CHAIR DINING with cushion (FD/MAP)
Material and labour in replacement for damaged front leg of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.
Material and labour in replacement for damaged rear leg of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge
Material and labour in replacement for damaged back rest of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.
Material and labour in replacement for damaged stiffener of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.
Material and labour in replacement for damaged side rail of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.
Material and labour in replacement for damaged front rail of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.
Material and labour in replacement for damaged back rail of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.
Material and labour in replacement for seat of chair dining with cushion, Seat shall be 12 mm thick BWR grade phenol bonded plywood, commercial vennered both sides, fixed to rails with 12 Nos. steel screws of suitable size. The seat ply shall be covered with removeabl 75 mm thick 32 density foam cushion with approved upholstery fabric of best quality as approved by the GE of rate Rs.300/- per meter. All as per drawing and as specified and directed by the Engineer-in-Charge
Material and labour for preparation of old/new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed.
REPAIR TO CHAIR WRITING (FD - 280 )
Material and labour in replacement for damaged front legs of Chair writing made out of well seasoned 1st class Teak wood, all as per drawing and as specified and directed by the Engineer-in-Charge.
Material and labour in replacement for damaged rear legs of Chair writing made out of well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge .
Material and labour in replacement for damaged back rest of Chair writing made out of well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge.
Material and labour in replacement for damaged stiffener of Chair writing made out of well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge
Material and labour in replacement for damaged fillet for canning of seat of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.
Material and labour for preparation of old/new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed.
REPAIR TO ALL TYPES OF STOOL DRESSING
Material and labour in replacement for damaged leg of stool dressing with well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge.
Material and labour in replacement for damaged front rail of stool dressing with well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge.
Material and labour in replacement for damaged side rail of stool dressing with well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge.
Material and labour in replacement for old / unserviceable /damaged cushion of stool dressing with new cushion of 32 densitiy (Make - sleepwell/kurlon) duly covered with tapestry cloths, colour and shade as approved by GE(Cost not less than Rs 300/- per metre) complete with stiching, all as per drawing and as specified and directed by the Engineer-in-Charge.
Material and labour for preparation of old/new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed.
REPAIR TO TABLE 3’ X 2’ (WITH / WITHOUT DRAWER) (FD-41.42.231.224.234.238 and 284)
Material and labour in replacement for table top with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for leg of Table of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for front rail of Table of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for Drawer of Table of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for side rail of Table of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for stiffner of Table of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .
Material and labour for preparation of old/new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed.
REPAIR TO TABLE 900’ X 900’ X 760’ (FD-88 and FD- 291)
Material and labour in replacement for table top with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for leg of Table of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for front rail of Table of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .
Material and labour for preparation of old/new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed.
REPAIR TO TABLE WRITING (FD – 33,249,275)
Material and labour in replacement for table top with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for leg of Table of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for front rail of Table of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for side rail of Table of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for stiffner of Table of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for shutter with 18/19mm thick pre laminated particle board one side teak faced (exterior grade) with 4mm thick teak wood edging all round including Knob and lock complete, all as specified and shown in drawing and as directed .
Material and labour for preparation of old/new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed.
REPAIR TO TABLE CENTRE (FD-274)
Material and labour in replacement for table top with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for leg of Table of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for front rail of Table of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for side rail of Table of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for stiffner of Table of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .
Material and labour for preparation of old/new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed.
REPAIR TO TEA POY (FD-232 and FD-382)
Material and labour in replacement for table top with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for leg of teapoy of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for front rail of teapoy of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for side rail of teapoy of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for stiffner of teapoy of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .
Material and labour for preparation of old/new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed.
REPAIR TO PEG TABLE (FD-277 and FD-384)
Material and labour in replacement for table top with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for leg of peg table of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for front/ side rail of peg table of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for stiffner of teapoy of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .
Material and labour for preparation of old/new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed.
REPAIR TO TABLE DINING FOR 6 / 8 PERSONS (FD-30, 273 and 376)
Material and labour in replacement for table top of table dining six persons with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for table top of table dining eight persons with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for long rail of Table dinning (06 persons) of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for long rail of Table dinning (08 persons) of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for leg of Table dinning (08/06 persons) of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for short rail of Table dinning (08/06 persons) of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .
Material and labour for preparation of old/new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed.
BOOK CASE - FD- 237/ DB
Material and labour in replacement for back of book case with 6 mm thick commercial ply wood BWR grade , ISI marked complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for table top with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for shelves of book case, all as specified and shown in drawing and as directed .
Material and labour in replacement for door shutter with knob of book case, all as specified and shown in drawing and as directed .
Material and labour in replacement for leg of book case, all as specified and shown in drawing and as directed .
Material and labour for preparation of old/new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed.
Material and labour in replacement for cover of sofa cushion, size of cushion shall be 530 mm x 500mmx100mm thick, colour and shade as approved by GE(Cost not less than Rs 300/- per metre) complete with stiching and chain as per sample held with furniture yard
REPAIR TO SIDE BOARD (FD – 26 M / 241) :-
Material and labour in replacement for top of side board with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 6 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for bottom of side board with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 6 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for door shutter of side board with 18/19 mm thick one side teak faced pre-laminated particle board including CP knob, lock, hinges fixed to each shutter and 6 mm thick teak wood beading all around complete all as specified and shown in drawing and as directed.
Material and labour in replacement for drawer of side board including CP knob fixed to each drawer complete all as specified and shown in drawing and as directed .
Material and labour in replacement for back side of side board with 9 mm thick commercial ply wood , complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for shelf of side board with 18/19 mm thick particle board , complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for leg of side board of required size made out of well seasoned 1st class Teak wood, complete all as specified and shown in drawing and as directed .
Material and labour for preparation of old treated or new wood or wood based surfaces of side board and applying two coats of French polish all as specified and directed.
Table Bed Side (FD-248)
Material and labour in replacement for top of side board with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 6 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for bottom of side board with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 6 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for door shutter of side board with 18/19 mm thick one side teak faced pre-laminated particle board including CP knob, lock, hinges fixed to each shutter and 6 mm thick teak wood beading all around complete all as specified and shown in drawing and as directed.
Material and labour in replacement for drawer of side board including CP knob fixed to each drawer complete all as specified and shown in drawing and as directed .
Material and labour in replacement for back side of side board with 9 mm thick commercial ply wood , complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for shelf of side board with 18/19 mm thick particle board , complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for leg of side board of required size made out of well seasoned 1st class Teak wood, complete all as specified and shown in drawing and as directed .
Material and labour for preparation of old treated or new wood or wood based surfaces of side board and applying two coats of French polish all as specified and directed.
REPAIRS TO RIFLE RACKS FOR 20 RIFLES
Material and labour in replacement for repair to Rifle racks by taking down the existing broken / unserviceable plank in the bottom of racks and supply and fixing of new well seasoned second class hard wood Shisham plank with standard grooving all as per drawing and as specified and directed by the Engineer-in-Charge
Material and labour in replacement for repair to Rifle racks by taking down the existing broken / unserviceable plank in the Top of racks and supply and fixing of new well seasoned second class hard wood Shisham plank complete with proper cutting shape for keeping of rifles all as per drawing and as specified and directed by the Engineer-in-Charge
Material and labour in replacement for repair to Rifle racks by taking down the existing broken / unserviceable leg and supply and fixing of new well seasoned second class hard wood Shisham leg all as per drawing and as specified and directed by the Engineer-in-Charge
Material and labour in replacement for taking down the existing broken / unserviceable rubber strip and supply and fixing of new Rubber strip for barrel rest all as per drawing and as specified and directed by the Engineer-in-Charge
Material and labour for preparation of old / new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed.
REPAIR TO HAT STAND WITH MIRROR (FD-23 & 261)
Material and labour in replacement for Looking Mirror of size 440mm x300mm x 5.5mm of approved quality (Make - Modi guard/Saint Gobin/Swastic) duly fixed with beading of size 35mm x 6mm made out of well seasoned teak wood duly finished all as per drawing and as directed by the Engineer in Charge.
Material and labour in replacement for Aluminium peg 100mm long as per sample shall be fixed with screw wood steel 25mm long all as per drawing and directed by the Engineer in Charge
Material and labour in replacement for MS plate for hanging of Hat stand as per approved sample shall be fixed to the back of the hat stand as shown on the drawing and as directed by the Engineer in Charge.
Material and labour in replacement for teak wood beading made out of well seaonsed teak wood of size 35mm x 6mm all around shall be provided to the frame of hat stand as shown on drawing and as directed by the Engineer in Charge.
Material and labour in replacement for Plywood 6mm thick commercial (Make-Green Ply/ Century / Archid) confirming to IS duly approved shall be provided whenever required to be fixed with head less nails at the back side of hat stand all as shown on drawing and as directed by the Engineer in Charge.
Material and labour in replacement for plywood one side teak face 4mm thick commerical confirming to IS duly approved shall be provided wherever required to be fixed with head ess nails at the front side of hat stand as shown on drawing and as directed by the Engineer in Charge.
Material and labour for preparation of old / new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed.
REPAIR TO TABLE DRESSING LADIES (FD-251,FD-32,FD-378,FD/MAP-II/07) :-
Material and labour in replacement for sliding glass shutter of size 300mm x 290mm x 5 mm thick complete including sliding wheels and aluminium channel complete , all as per drawing and directed by Engr-in-Charge
Material and labour in replacement for leg of table dressing of required size made of well seasoned 1st class Teak hard wood complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for bottom of table dressing with 18 / 19 mm thick particle board commercial type, exterior grade conforming to IS-3087-1989 , ISI marked complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for side of table dressing with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for back of table dressing with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for top of table dressing with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed .
Material and labour for preparation of old / new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed.
Table dressing gents with mirror (FD-31 /FD 233 / 379/MAP-16 )
Material and labour in replacement for top of table dressing gents of size 900mm x300mm with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for bottom of table dressing with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for side of table dressing with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for back of table dressing gents with 12mm thick teak wood planks , complete, all as specified and shown in drawing and as directed .
Material and labour in replacement for drawer of table dressing gents with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed .
Material and labour for preparation of old / new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed.
REPAIR TO BED PLYWOOD TOP (FD-246)
Material and labour for in replacement of top of bed ply wood with 12 mm thick commercial plywood, BWR grade, ISI marked of make Kit ply/century ply/green ply fixed on the top of bed plywood with screws complete, all specified and shown in drawing and directed .
Material and labour for in replacement of leg using old serviceable short rail obtained from respective item including cutting and made to shape and size of leg complete, all specified and shown in drawing and as directed .
Material and labour for in replacement of long rail of bed ply wood of required size made of well seasoned 1st class teak wood, complete, all specified and shown in drawing and directed.
Material and labour for in replacement of short rail using old serviceable long rail obtained from here in before including cutting and made to shape and size of short rail complete, all specified and shown in drawing and as directed .
Material and labour for in replacement of unserviceable head board of bed ply wood with new head board complete all as per drawing and specified and directed.
Material and labour for in replacement of unserviceable foot board of bed ply wood with new foot board complete all as per drawing and specified and directed.
Material and labour for preparation of old / new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all specified and directed.
Charpoy GI Pipe With Nylon Newar (FD-220) :-
Material and labour for in replacement of 12 mm thick plywood top , commercial type, BWR grade, ISI marked of (Make : Century ply/ Kit ply / green ply), in single piece fixed on existing charpoy GI pipe after tightening of frame of charpoy if required including nuts, bolts of not less than 8mm dia and GI washers (minimum 10 Nos.for each charpoy) and taking out existing nylon newar complete all as specified and shown in drawing and directed.
Material and labour for mild steel flat iron 850 mm long of size 40mmx5 mm, welded to long rails horizontally (one end of each long rail) at equal distance including necessary cuttings, weldings , drilling holes where required for fixing plywood and painting to flat iron piece with two coats of black synthetic enameled paint over a coat of red oxide zinc chrome primer after preparation of new steel surface complete all as specified and directed.
Dismentling / opening / loosening of GI charpoy as deemed necessary, taking out defective long rail and Supply & fixing new long rail made of 32mm bore GI pipe, medium grade, ISI marked, including necessary drilling, threading, etc. and reassembling the charpoy tight and fit complete all as specified and shown in drg and directed. Make of Pipe : JINDAL.
Material and labour for short rail of GI Charpoy made from long rail retrieved from Srl item No. 10.03 above including necessary cutting, threading, welding, etc. and re-assembling the charpoy tight and fit including taking out defective short rail complete all as specified and shown in drg. and directed.
Material and labour for leg of GI Charpoy made from short rail retrieved from Srl item No. 10.04 above including necessary cutting, threading, welding, etc. including provision of MS plate 32mm dia 3mm thick to bottom of leg black painted with all edges of plate grinded to eliminate sharp edges and re-assembling the charpoy tight and fit including taking out defective leg complete all as specified and shown in drg. and directed.
Supply and fix in replacement of elbow, 32mm dia, heavy duty, ISI marked for GI pipe charpoy complete all as specified and shown in drawing and directed.
Supply and fix in replacement of GI check nut hexagonal, 32mm bore for GI pipe charpoy complete all as specified and shown in drawing and directed.
Supply and fix in replacement of MS plate/wooden plug and S&F 6 mm thick and 32mm dia MS Plate welded to bottom of each leg of GI Charpoy including grinding of extra material complete complete all as specified and shown in drawing and directed.
Bed Hard Steel (FD/E6/MAP/08(R))
Material and labour for for in replacement of top of bed ply wood with 12 mm thick commercial plywood, BWR grade, ISI marked of make Kit ply/century ply/green ply fixed on the top of bed plywood with screws fixed with existing mild steel GI bolts of 6mm dia of suitable lengths including washers and nuts complete, all as specified and shown in drawing and as directed .
Material and labour for welding of broken joints of Bed Hard Steel including preparation of surface complete, rest all as shown on drg and directed.
Material and labour in reapir of head board of size 635 mm X 200 mm made from 18mm thick pre-laminated particle board exterior grade both side decorative finish shade as approved by GE complete including removal of damaged head board all as specified on drawing and directed.
Material and labour in reapir of foot board of size 635 mm X 200 mm made from 18mm thick pre-laminated particle board exterior grade both side decorative finish shade as approved by GE complete including removal of damaged head board all as specified on drawing and directed.
Material and labour for for in replacement of Rubber shoe and new rubber shoe of size 25mm square to be fixed as per sample
Material and labour for preparation of old / new steel surfaces of any description by scrapping, rubbed down by emery paper and applying two coats of black synthetic enamel paint over a coat of red oxide primer of approved quality complete all as specified and directed.
Charpoy IP folding with Hard top (FD-388)
Material and labour for in replacement of top of Charpoy IP folding Hard top with 12 mm thick commercial plywood, BWR grade, ISI marked of make Kit ply/century ply/green ply fixed on the top of bed plywood with screws fixed with existing mild steel GI bolts of 6mm dia of suitable lengths including washers and nuts complete, all as specified and shown in drawing and directed.
Material and labour for welding of broken joints of Charpoy IP folding with Hard top including preparation of surface complete, rest all as shown on drg and directed.
Material and labour for preparation of old / new steel surfaces of any description by scrapping, rubbed down by emery paper and applying two coats of black synthetic enamel paint over a coat of red oxide primer of approved quality complete all as specified and directed.
Charpoy IP Hard top (FD/MAP-II/01)
M&L for in replacement of plywood from Charpoy IP Hard top with new 12mm thick plywood top of size 1980mmx900mm BWP grade type ISI markded (Make:National/Assam Gold/Green ply/Centry ply) fixed with existing mild steel GI bolts of 6mm dia of suitable lengths including washers and nuts all as specified in drg and directed.
Material and labour for welding of broken joints of Bed Hard Steel including preparation of surface complete, rest all as shown on drg and directed.
Material and labour for preparation of old / new steel surfaces of any description by scrapping, rubbed down by emery paper and applying two coats of black synthetic enamel paint over a coat of red oxide primer of approved quality complete all as specified and directed.
M& L for in replacement of Rubber shoe with new rubber shoe of size 25mm square to be fixed as per sampled .FD/MAP-II/01.of approved quality complete all as specified and directed.
Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material.
Bharat Trading Company
M S Enterprises
RK STEEL FABRICATORs
Yash enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .