MAINT AND REPAIR TO JOINERY, PLUMBING, TILING AND OTHER ALLIED B/R REPAIR WORKS TO COMMAND HUTS, CENTRAL AMENITIES, OFFRS MD ACCN AND OTHER AREAS AT OR NEAR MALL ROAD, POLO ROAD, CASSEL ROAD, PARADE ROAD, MANDIR MARG ETC IN THE AOR OF AGE B/R-I UNDER

Amount

Taking down chowkhat or frames with shutters (without taking off shutters from the frames) including iron mangory not exc. 1.5 Sqm each complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frames) including iron mangory exc. 1.5 sqm but n.exc 4 sqm each complete all as specified and directed.

Taking down shutters of any description not exceeding 2.00 Sqm each complete all specified and directed.

S & F in repairs 25 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20mm-210gms/25mm-455gms complete all as specified and directed. (Make: Prayag/ Prince/ Polytuf)

S&F in repairs 15mm Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms), fancy type, complete all as specified and directed. (Make: Prayag/ Prince/ Polytuf)

S & F in repairs Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm- 125gms), complete all as specified and as directed. (Make: Prayag/ Prince/ Polytuf)

S & F in repairs angle cock of PTMT any colour high pressure screwed for iron pipe 15mm bore and fixed, (Minimum weight 15mm-90gms) complete all as specified and as directed. (Make: Prayag/ Prince/ Polytuf)

S & F in repair 15mm galvanised iron medium grade short fittings such as Socket, Elbow, Nipple, Tee, Tee Reducer, Elbow Reducer, Union, double nipple etc (ISI marked) complete all as specified and directed.

S & F in repair 20mm galvanised iron medium grade short fittings such as Socket, Elbow, Nipple, Tee, Tee Reducer, Elbow Reducer, Union, double nipple etc (ISI marked) complete all as specified and directed.

S & F in repair 75 /110 mm dia PVC floor trap , with grating including jointing to waste pipe with solvent fixed in cement concrete type B1 (1:2:4),complete all as specified and directed.

S & F in repair 75 mm dia PVC muilty floor trap , with SS grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4),complete all as specified and directed.

S & F in repair 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floor or in wall completed all as specified and directed

S & F repair 110 mm PVC (SWR) bends with access door completed all as specified and directed

S&F repair 75 mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints ,laid in trenches or in floor or in wall complete all as specified and directed.

S & F in repair 75 mm dia PVC cowls

S & F in repair 110 mm dia PVC cowls

S & F repair 75 mm PVC (SWR) bends with access door completed all as specified and directed

S&F Precast SFRC square or rectangular manhole covers 75 mm thick with frame medium duty conforming to IS-12592 including demolition of existing slab covers, including necessary reinforcement, complete all as specified and as directed.

Cleaning old sewage lines of any dia and cleaning of water with sludge from soakage wells with Mechanically operated 25 tonne truck mounted de-sludger with 12000Ltr capacity tanker having water fitted high pressure jet machine for cleaning and de-slugging of sewage line, soak wells, septic tanks etc., shall be used by the contractor as per scheduled programme in writing and completion of each job to the entire satisfaction of Engineer-in-Charge as instructed. (Note : (a) In case contractor fails to deploy the machine as per scheduled programme a recovery of Rs 1000/- per day shall be deducted from his payment. (b) Per day means 8 working Hrs in a day excluding standby period due to any reason.)

S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F Factory Made Solid PVC Moulded door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing & fixing in the frame at site as per specification & drawing.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Complete all as specified and as directed.

S & F 30 mm thick second class hard wood glazed and Skelton shutters open rebated and prepared to receive glass, gauge etc. (without sash bars) edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part -I section 8 clause 8.24 (a) supplied and fitted to chowkhat

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S & F framed work such as in door frame, door shutters / gate of angel , Flat iron or other section with MS sheet , cladding , gusset plates, rails, braces, , hold fast etc. complete , drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings, including hinges hold fast of Fe 410-W (Gde E-250 quality) etc. complete all as specified and directed.

S & F Mild steel, plain, black sheet 1.00mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.

S & F factory made uPVC white colour casement (Openable) Door made of extruded profile with wall thickness of 2.3mm ( + -0.2mm). door profile with hollow section with muilty chamber, frame (60mm x 58mm), sash (60mm x 104mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware: [casement door handle both side with Cylinder, made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Door transmission gear made of mild steel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and with stainless steel wire mesh (0.36mm nominal dia of wire and average width of aperture 1.40mm. (Note: The unit rate quoted by contractor include cost of wire mesh and all other connected accessories. Net opening will be measured for payment purpose.)

S&F Aluminium alloy powder coated windows sliding track (three track), bottom weighing not less than 1.015 Kg/RM, sides and top not less than 0.826 Kg/RM double rebated and 0.55Kg/RM for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter sliding type with aluminium sections as per series - A (15mm) 3 track of Jindal section numbers for sliding windows with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc. including provision of 5.5mm thick tinted glass/frosted glass of superior quality and stainless steel jail including all standard fittings, complete all as specified and as directed.

S & F for Aluminium alloy powder coated door including frame and channel of section (Door frame single groove 101.6mm x 44.45mm x 1.80mm, shutter top section 47.62mm x 44.45mm x 1.80mm thick, shutter bottom section 114.30mm x 44.45mm x 1.80mm thick, shutter vertical section 85mm x 44.45mm x 1.80mm thick, shutter middle section 83.50mm x 44.45mm x 1.80mm thick & glazing clips weighing not less than 0.097 Kg/RM) including shutter fixed to sliding type/Openable frame and channel as directed and approved by GE and as per IS specifications including provn of 5.5mm thick tinted glass/12mm thick pre-laminated particle board as required including handles, tower bolt, door closer heavy duty “SAMRAT”, locking arrangement “GODREJ”, rubber gasket and door stopper complete all as specified and as directed.

S & F for Powder coated aluminium partition with frame of standard powder coated aluminium sections of size 101.60mm x 44.45mm x 1.80mm in vertical and horizontal members and glazed with 5.5mm thick tinted glass and 12mm thick pre-laminated particle board interior grade with laminations on both faces as directed by Engr-in-Charge according to site requirement including jointing cleats, glazing pins, rubber packing and fixing accessories as per site requirement including taking down existing partition of any type complete.

M & L for Ready Mix cement concrete (RMC), M-30 along with necessary take coat / priming coat of cement slurry to effective bond with existing surface, as in Hard standing/Pathway /pothole filling/road cutting filling /Road side berm filling and similar nature of work in any position and location duly maintaining proper slope/gradient as required at site and using form work at sides where required including demolition of cement concrete (unreinforced) in any position exc 15 cm thick (below or above ground level). (Note: 1. The flooring required of various thickness as per site condition shall be also measured and paid in Cum. 2. No extra payment shall be made for formwork used 3. Necessary vouchers of RMC from plant shall be produced duly defaced by Engr-in-Charge during payment of RAR)

S & F for 5.5 mm thick Toughened glass fixed as in doors, windows, partitions and similar work including cutting to shape, drilling holes required, frosted on one side etc including dismantling of existing glass of any type complete all as specified and directed

S & F in repairs ready made floor/wall mounted Vanity box made of HDHMR board, both side laminated consisting of the following combination :- (a) Wash Hand Basin 810mm x 500mm. (b) Base Cabinet 780mm x 485mm x 460mm. (c) Side Cabinet 300mm x 250mm x 1800mm. Make : Hindware - Cat Part No. 70089 or 70084. Make : Kohler : Cat Part No. K-31602IN-E63

S & F in repair aluminium dia cast door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

S & F 100mm size stainless steel butt hinges fixing with screws to PVC door frame complete all as specified.

S & F Aluminium Anodised 150mm size barrel tower bolt complete all as specified and as directed.

S & F 150mm size aluminium anodised handles complete all as specified and as directed.

S & F 100mm size Mild steel butt hinges medium weight fixing with screws or welded to Iron door frame complete all as specified.

S & F Mild steel 150mm size barrel tower bolt complete all as specified and as directed.

S & F 300 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S & F in repairs 100mm size stainless steel butt hinges fixing with screws to PVC door frame complete all as specified.

S & F in repairs Aluminium Anodised 150mm size barrel tower bolt complete all as specified and as directed.

S & F in repairs 150mm size aluminium anodised handles complete all as specified and as directed.

S & F in repair for mild steel pressed oval type handles stove enamelled black for doors 150 mm long complete all as specified and directed.

S & F in repairs floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring and vulcanised rubber piece fixed in floor, over all length of cover plate 140mm complete all as specified and directed.

S & F in repair for 150mm long Mild steel, semi-barrel tower bolt, open cover, with sheet pressed barrel, stove enamelled black with bright bolt and fixed complete all as specified and as directed.

S & F in repairs 300 mm long aluminium alloy anodised sliding door bolt with haps, staple ( bolt type ) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S & F in repairs SS-304 grade stainless steel Curtain Rod 25 mm dia with 1.25mm thickness finials fixed to wall with stops and bracket etc. complete all as specified and as directed. (Note : Damage to Brick/stone or any type of wall and existing cement plaster/pointing during fixing of curtain rod/bracket/finial shall be make good and bring back to old position to be done by the contractor and the cost for the same shall be deemed to include in the quoted rate, No extra payment will be made for brick work, re-plastering and painting to the contractor.)

S & F in repair GI mild steel wire cloth of 0.56mm nominal dia of wire and average width of aperture 1.00mm of stainless steel in existing steel windows, fixed with screws or rivets and provision of new flat iron beads of size 12 x 5 mm complete all as spd and directed. Note – (Removal of steel window shutter incl refixing in the same location where necessary will also included in quoted rate)

S & F in repair stainless steel wire cloth 0.36mm normal dia of wire and average aperture 1.00mm and fixed with tinned tacks or stainless steel wire staples as specified and directed.

Hacking out old broken glass from wooden frames and steel frame or stone, concrete or brick surrounds , glazed with putty or fixed with beads.

S & F 3 mm thick sheet glass , ordinary quality and glazed with oil putty in square n. exc 0.5 Sqm in each pane fixed complete all as specified and directed.

S & F 3 mm thick figured glass , pin head type and glazed with oil putty in square n. exc 0.5 Sqm in each pane fixed complete all as specified and directed.

S & F 5 mm thick sheet glass , ordinary quality and glazed with oil putty in square n. exc 1 Sqm in each pane fixed complete all as specified and directed.

M & L for fabrication & fixing to horizontal & vertical shelves/ partitions /sides/ top/ bottom/back sides etc for Modular kitchen cabinet/ wardrobe/ cupboard/drawers made out of 17/18 mm thick WPC boards with laminated colour on both sides, of approved quality including paste to all exposed edge by edge Banding Tape including provision of cabinet for keeping baskets/ drawers etc. and including taking down existing shutter/panel/partition in any type and any position complete all as specified and as directed. (Make :Rajshree or equivalent)

M & L for Fabrication & fixing to front side /all exposed sides of modular kitchen cabinet/ wardrobe/ cupboard/drawers made out of 17/18 mm thick WPC boards with glossy/mat colour laminate sheet on front face and all exposed sides and white laminate on other face of approved quality and including paste to all exposed edge by edge Banding Tape and including provision of cabinet for keeping baskets/ drawers etc. and including taking down existing shutter/panel/partition in any type and any position complete all as specified and as directed. (Make :Rajshree or equivalent)

S & F in repair soft closure hinges with all fittings at mounting plate of premium quality, fixed in door/cup board shutters complete all as specified and as directed (Make : - Godrej/Hettich/IPSA and as approved by GE).

S & F in repairs Continuous (piano) hinges, stainless steel, width of flap 30mm complete all as specified and as directed.

S & F in repair 150 mm size designer door handle stainless steel chromium plated for Cabinet/Wall Unit/Overhead Unit/Wardrobe etc. complete all as specified and as directed.

S&F in repair mortice night latch of size 75 mm, 4 levers of mild steel etc. complete all as specified and as directed.

S & F for Magnetic catches with steel body ‘H’ type, fixed to shutter, complete all as specified.

S & F in repair uPVC door locking system including tightening of shutters with smooth function of uPVC door complete all as specified and as directed.

S & F in repairs uPVC casement door lever handles both side made of zinc alloyed (white powder coated) with complete system of Cylinder Lock, Door Barrel Lock, one side Thumb turn Knob with other side key system with 3 Standard Keys,Anti-Pick,Anti-Bump,Anti Drill,High Security for UPVC door etc complete all as specified and as directed.

S & F in repairs Cylinder Lock, Door Barrel Lock, one side Thumb turn Knob and other side key system with 3 Standard Keys,Anti-Pick,Anti-Bump,Anti Drill, High Security for UPVC door etc. complete all as specified and as directed.

S & F in repairs UPVC casement door lever handles both side made of zinc alloyed (white powder coated) with one side knob and one side key system complete all as specified and as directed.

Taking down aluminium/UPVC door, window shutters with frame upto 2.5 Sqm each and refixing in same opening after necessary repair like securing glass beads, refixing of hinges, door locks , realignment of frame fixed with fastener , bolts , screws, silicone / filler for gaps of frame etc. to smooth movement of door etc. complete all as specified and as directed. (Note : Cost of all fittings and fixtures required as per site shall be deemed to be included in the quoted rate of the item).

M & L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 and including demolition of old brick/ PCC block masonry complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls and concrete surface of ceiling etc. including raking out joints hacking for key scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and fair complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and fair complete all as specified and directed.

M & L Rendering 5 mm thick on fair faces of concrete or concrete surface in ceiling in CM 1:3, finished even and fair complete all as specified and directed.

M & L for Washed stone grit plaster on exterior walls in two layers (colour and design as approved by GE), under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern (groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove) complete including scrubbing and washing, the top layer with brushes and water to expose the stone chippings including taking down of existing cement or cement lime plaster of any thickness and any description on brick or stone walls including raking out joints, hacking for key and scrubbing down with water, complete all as specified and as directed.

M & L for preparation of new plaster external wall and ceiling surfaces of and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed.

M & L for Preparation of newly plastered /unplastered surfaces of walls and ceilings and applying Two coats of Oil Bound Distemper on wall surfaces over a coat of primer ,complete all as specified and directed.

M & L for preparation of plastered or unplastered old decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflorescent salts and treading oil and greasy spots, filling the cracks, holes with POP/Putty and applying One coat of Oil bound distemper complete all as specified and directed.

M & L for preparation of plastered or unplastered or brick walls or pointing surface old decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflorescent salts and treading oil and greasy spots, filling the cracks, holes with POP/Putty and applying One coat of Cement Based Paint complete all as specified and directed.

M & L for preparation of plastered or unplastered old decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflorescent salts and treading oil and greasy spots, filling the cracks, holes with POP/Putty and applying one coat of weather proof exterior acrylic emulsion paint premium quality of approved manufacturer, of required shade and colour as approved by GE , as per manufacturer's specification and using roller brush up to 10 Meter height complete all as directed and directed .

M&L PVC hollow wall panelling 5mm thick wood grain teak finished (colour and design as approved by GE) pre-laminated inclusive of fixing on to wall including moulding end caps with L / U beading etc. fixed with PVC sleeves and screws as required at site including dismantling of old wall panelling of any description, complete all as specified and as directed. Note : (i) Taking down existing any type of electric board sheet/ tube light/ LED / any fittings before fixing of panels and refixing the same after fixing the panels as required are included in the quoted rates by the contractor.

M & L for preparation of plastered or unplastered old decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflorescent salts and treading oil and greasy spots, filling the cracks, holes with POP/Putty and applying two coat of weather proof exterior acrylic emulsion paint premium quality of approved manufacturer, of required shade and colour as approved by GE , as per manufacturer's specification and using roller brush up to 15 Meter height complete all as directed and directed .

M & L for 2mm avg thickness plaster of Paris putty on new / old any type of surface of wall/ ceiling including sand papering thus making surface even & smooth etc and prepare to receive further treatment etc, complete all as specified and directed. (Make JK Wall care, Birla and as approved by GE)

M & L for applying one coat of synthetic enamel paint including preparation of old wooden surfaces of any description over 10 cm width or girth and complete all as Specified and directed.

M & L for applying one coat of synthetic enamel paint including preparation of old steel surfaces of doors, gates, windows , grills, frames, roof trusses , vertical posts, view cutter sheet etc any description over 10 cm width or girth at any position and complete all as Specified and directed.

M & L for applying one coat of synthetic enamel paint through spray painting machine including preparation of old steel/AC sheet/Concrete surfaces of roof sheet , pre-painted roof sheet of any pattern , design , any position at any height of building and complete all as Specified and directed.

M&L two coat of synthetic enamel paint (finishing coat) over one coat of pink primer to new wood surfaces of any description over 10 cm width or girth incl preparation of surfaces complete all as specified.

M & L two coat of synthetic enamel paint (finishing coat) over one coat of primer to new steel surfaces of any description over 10 cm width or girth incl preparation of surfaces complete all as specified.

M & L for preparation of old stone, PCC kerb stone concrete surfaces of any description over 10 CM width or girth and applying one coat of synthetic enamel paint (colour and pattern as per approved by GE ) including repair & preparation with wall care putty over a coat of primer complete all as specified and directed.

M & L for preparation of pathway/flooring (over Interlocking / Chequered tile surfaces) or any type of surfaces old/new or in any position and applying two coats of floor paint of superior quality etc. completed all as specified and directed by Engr-in-Charge. (Make : Indigo floor paint and equivalent in Asian /Berger/ Indigo as approved by GE ).

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall / view cutter etc, fixed with self tapping screws with bent to a curve (of any radius as per required) including dismantling in roof coverings (corrugated , semi corrugated etc.) any gauge, thickness, including , Nainital or similar pattern roof coverings sheet in any pattern & position of roof coverings. Complete all as specified and directed

M&L for repair of existing GI based corrugated steel roof sheeting of any type, plain or corrugated , including straighten the bent sheet, filling the holes with self adhesive solvent, making good and fixing in position upto 12m height with self tapping screws @ 0.9m C/C, and applying one coat of synthetic enamel paint matching with existing shade/ colour, complete all as specified and directed

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour as in ridges hips, valley gutter, drip and straight flashing , fixed with self tapping screws etc. including dismantling in roof coverings ( corrugated , semi corrugated etc.) any gauge, thickness, including , Nainital or similar pattern roof coverings sheet in any pattern & position of roof coverings. Complete all as specified and directed

S&F 2mm thick coloured polycarbonate sheet translucent plain/corrugated sheeting with two corrugations side lap fixed with coach screw and washer in view cutter/ roof, wall, gate etc. including taking down old UNSV fibre sheet of any type complete all as specified & directed.

Dismantling framed timber scantling in any type of frame , fillets, rails, posts, rafters, purlins, etc. complete all as specified.

S&F steel work in tubular trusses,purline, doors , posts, frame works any type etc. including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and directed

M&L for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off from premises complete all as specified and directed

M & L Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) size 395 x 395 mm / 400 x 400 mm , in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over and including 15 mm thick avg screed bed in CM 1:6 etc. complete all as specified and directed by Engr-in-Charge

M & L Coloured Glazed ceramic tiles size (350x250), (450x300) or (600 x 300) x 7-8 mm thick, in vertical surface such as skirting, dados , etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10 mm thick rendering in CM 1:4 etc. complete all as specified and directed by Engr-in-Charge

Demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed.

M & L 75 mm thick Cement concrete work as in plinth protection type C-1 , 1:3:6 (20mm graded aggregates) with finishing cement concrete surface even and smooth without using extra cement, laid in panel area not exc 1.50 sqm in each panel, complete all as specified and directed

M&L for 16 mm thick granite (of any type) work( table rubbed and polished) in jambs, pillars, window cills, cooking platforms, floor , steps etc and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab over and including 15 mm thick screed bed/rendering in CM 1:4 including rounding to edge of granite as per required after dismantling of existing granite of any description with cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed.

M & L for Machine cut kota stone slab flooring 16-18mm thick over and including 15mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing after dismantling floor, hearth or wall tiling with cement mortar bedding (but not backing), complete all as specified and as directed.

M & L for 75mm thick Cement concrete 1:4:8 Type D-2 (using 40mm graded agg) as in sub base of flooring or in any position complete all as specified and as directed.

M & L for Machine pressed precast concrete interlocking paver block of any shape and size (Two colour combination) conforming to IS 15658-2006 of 80 mm thick, M-40 Grade laid dry in floor/path including 50 mm thick sand bedding layer after dismantling of old interlocking tiles /path etc and remove from the MoD land complete all as specified and as directed.

M & L for Machine pressed precast concrete interlocking paver block of any shape and size (Two colour combination) conforming to IS 15658-2006 of 60 mm thick, M-35 Grade laid dry in floor/path including 50 mm thick sand bedding layer after dismantling of old interlocking tiles /path etc. and remove from the MoD land complete all as specified and as directed.

M & L for glossy finished rubber moulded coloured chequered cement concrete tiles 30cm x 30cm x 20-22mm thick, set, jointed and pointed in neat cement slurry over and including 15mm thick screed bed in CM 1:6 etc. including dismantling of existing chequered tiles of any type complete all as directed.

S&F in repair Vitreous China squatting pan 'Orissa' pattern size 580 x 440 mm white, with integral foot rests with connection to trap , and to flushing pipe anti-syphonage pipe including trap set in and including concrete etc. complete including making good to floor all as specified and directed by Engr-in-Charge .

S & F in repair Vitreous China wash down pedestal pattern EWC, white and including with PVC (SWR) ' S' Trap / 'P" Trap , including seat cover with connection to drain and to flushing pipe anti-syphonage pipe, and making good to floor complete all as specified and directed.

S & F in repairs Vitreous china single Piece floor mounted WC With PP Soft Close Seat Cover, Hinges, with cistern & Dual Flush Cistern Fitting, Fixing Accessories and Accessories Set, Size: 360x730x740 mm, S Trap- 300 mm including connection to drain pipe with all fitting and fixture complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. SLS-WHT-6851S300PP or equivalent in Jaquar / Marc / Kohler )

S&F in repair Vitreous China wash basin, white, flat back, size 550 x 400 mm including , chain and plug but including brackets or erecting stand including & (32 mm -45 gms/40mm-60 gms ) waste coupling of CP complete all as specified and directed by Engr-in-Charge .

S & F in repair Vitreous china wash basin counter oval type size 600x425x195mm, under any type of slab with all fitting and fixture, & (32 mm -45 mgs/40mm-60 mgs) waste coupling of CP complete all as specified and as directed. (Make : Jaquar / Hindware/Parryware/cera)

S & F in repair Vitreous China Urinal, full stall type Urinal With Fixing Accessories, white complete all as specified and directed. (Make : Jaquar cat part No.URS-WHT-13261 and equivalent in jaquar / Hindware/Parryware or equivalent make as per approved make list).

S & F in repair urinal partition of 12-16mm thick toughened glass fixed with chromium plated screws and bracket of suitable size complete all as specified and as directed. (Make : Jaquar / Hindware/Parryware/cera)

S & F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks 2000 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including tank nipple, 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.

S & F Rotational moulded polyethylene water storage tanks 500 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including tank nipple, 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.

S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including tank nipple, 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.

S & F in repair 20 mm bore Gun metal, globe or gate valves, with iron wheel head / leaver arm, screwed both ends for iron pipe and fixed

S & F in repairs 25mm bore Gun-metal, globe or gate valves, with iron wheel head screwed for iron pipe complete all as specified and directed.

S & F in repairs 15mm bore Gun-metal, globe or gate valves, with iron wheel head screwed for iron pipe complete all as specified and directed.

S&F steel water tubing galvanised 15mm bore medium grade fixed to walls, under floors and on ceiling surfaces , including cutting chases , piping in making good to facings where required and pointing in Cement mortar 1:3 for concealed water tubing or conduit pipe etc. and including taking up or down old steel tubing 15 mm bore and connections in any position etc. complete all as specified and directed.

S&F steel water tubing galvanised 20 mm bore medium grade fixed to walls, under floors and on ceiling surfaces and including taking up or down old steel tubing 20 mm bore and connections in any position etc. complete all as specified and directed.

S&F steel water tubing galvanised 25 mm bore medium grade fixed to walls, under floors and on ceiling surfaces and including taking up or down old steel tubing 25 mm bore and connections in any position etc. complete all as specified and directed.

S&F in repair 15mm quarter turn brass angle valves, chromium plated cast copper alloy, polished body screwed down, high pressure, suitable for 15mm bore steel tubing complete all as specified & directed. (Make: Jaquar/ Marc/ Kohler)

S & F in repair 15 mm bore bib tap chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc. complete all as specified and directed. (Make: Jaquar/ Marc/ Kohler)

S&F in repair 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed. complete all as specified and directed. (Make: Jaquar/ Marc/ Kohler)

S&F in repair 15 mm concealed stop valves with long shank and cup chromium plated fancy type for iron pipe and fixed etc. complete all as specified & directed. (Make: Jaquar/ Marc/ Kohler)

S&F in repair Brass CP Basin mixer central hole for making hot and cold water fixed as per manufacturers manual with long shank and cup washers, screwed both ends suitable for 15mm bore GI Pipe joints to GI pipes or unions, complete all as specified and directed. (Make : Jaquar Continental CON-CHR-167KNB or equivalent in Marc / Kohler as approved by GE )

S&F in repair brass chromium plated wall mixture 3 in 1 system with L- bend provision for over head shower and suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls all as specified and directed. ( Make : Jaquar Continental CON-CHR-273KNUPR or equivalent in Marc / Kohler )

S & F in repairs Fancy type sink mixer for mixing hot and cold water with swinging port, screwed for iron pipe,15mm bore complete all as specified and as directed. (Make : Jaquar/Marc/Kohler)

S & F in repair CP shower rose fancy type 125 mm x 125mm size with 300 / 600 mm long shower arm, suitable for 15mm bore pipe, complete all as specified and as directed. (Make : Jaquar/Marc/Kohler)

S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm.

S & F in repair PVC connections 15mm size with PTMT nuts of length 600 mm.

S & F in repair Designer type high quality fancy type looking mirror of size exc 0.70 Sqm but not exc 0.90 Sqm as approved by Engr-in-Charge 5.50-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as specified and as directed.

S&F in repairs CP Hand Shower (Health Faucet) with 8 mm Dia, 1 Meter Long Flexible Tube & Wall Hook completed all as specified Make : Jaquar Cat part No. ALD-CHR-573 or equivalent in Marc / Kohler as approved by GE)

S & F in repair Stainless steel Grating dome 100/ 125mm dia with or without hole for waste pipe complete all as specified and as directed.

M & L for preparation of black top surfaces of road by cleaning with air blower and applying 1.5mm thick road marking strips, dashes, arrows letters etc. 10cm wide or more (retro-reflective) of white or golden yellow shade/colour using hot thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and driven by experienced operator on road surface including cleaning all loose dirt, seals, oil greases and foreign materials etc. complete all as directed. (Make : Asian Paints/APCO or equivalent).

M & L for preparation of old existing pathway/road/hard standing areas duly brooming/scraping down to remove all loose dirt including removing the vegetable/glass over it further applying evenly one coat of road marking thinable paint (bituminous) of any colour (bituminous thinable paint mixed with water at the ratio of 1:20) as directed and approved by Engr-in-Charge complete all as specified and as directed.

S&F in repairs of CP towel rail 600mm long fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 190 gms) fixed on walls, complete all as specified. (Make: Jaquar/ Marc/ Kohler)

S&F in repairs 32mm size waste fitting (coupling) brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed all as specified and directed.

S&F in repairs of 32mm brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, unions and cap and fixed, complete all as specified and directed.

S & F in repair 32/40mm spring type PVC waste pipe fixed to WHB and sink (Note minimum length of each pipe should not be less than 0.80RM), complete all as specified and as directed.

S&F in repair 10 Ltrs capacity PVC valve less symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket & flushing pipe etc. complete all as specified and directed

S & F in repair flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern for IWC & EWC etc. complete all as specified and directed.

S & F in repairs Polyethylene syphon kit assembly (Cascade Type Floor Mounted as required) for flushing cistern, complete all as specified and as directed.

S & F in repair flushing cistern handle complete all as specified and directed

S & F in repairs 15 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20mm-210gms/25mm-455gms complete all as specified and directed. (Make: Prayag/ Prince/ Polytuf)

S & F in repairs 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20mm-210gms/25mm-455gms complete all as specified and directed. (Make: Prayag/ Prince/ Polytuf)

S&F in repair internal fitting suitable for single piece water closet (floor mount/ wall mount) of any make and size complete all as specified and directed.

S & F factory made WPC railing combining WPC board/Fancy designer type grating and WPC frame 100% solid WPC (wood polymer composite) railing of required length and of 2' to 2.5' height , comprising of 18mm thick sheet of virgin PVC resin of K value 58-60 (Suspension Grade) , Calcium Carbonate and natural fibres (Wood Powders/rice husk//wheat husk) and non toxic additives, made from single extrusion process, WPC foam board with having minimum density 650kg/cbm and WPC frame having minimum density 780kg/cbm manufactured by "RAJSHRI" an ISO 9001-2015 certified Company, having good screw holding capacity (screw withdrawal strength of 2000N (Face) & 1100N (Edge) , Minimum comprising of 50N/mm2, Modules of elasticity 850N/mm2 and resistance of speed of flame of class A category with property of being termite/Borer free water /Moisture proof and fire resistance. For WPC railing WPC jali to be fixed with WPC frame of size 75x50mm with necessary supporting lengths at vertical as well as horizontal at wall frames to be fixed with 3"x3" GI 'L' or SS cleats to support vertical frame lengths including demolition /dismantling of existing RCC jallies with frames complete all as specified and as directed. (Make : Rajshree or equivalent as approved by GE) (Note : The said item shall be fixed over boundary walls/roof tops and in any other positions as per requirement at site)

garnet engineers contractors (BID ID -3389718)

MS BUILDTECH (BID ID -3390043)

Akhil Enterprises (BID ID -3389916)