PROVN OF VIEW CUTTERS AND ALLIED WORKS AT ABUTTED PORTION OF BOUNDARY WALL AT AF STN KANPUR

M&L for earth work in excavation of all kind of soil by mechanical means (Hydraulical excavator)/manualy in foundation , trenches or drains,post hole or similar work (not exceeding 1.5 in depth and width or 10 Sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5mtr including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metre complete all as specified and directed.

M&L PCC 1:4:8 type D2 using 40 mm graded stone aggregate as Cement concrete in foundations, filling in and mass concrete, complete all as specified and directed.

M&L for Providing, cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones,post hole , bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M & L rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410-W(GdeE- 250) qualityAcomplete all as specified and directed.

S &F rolled mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces of any description exc. 10cm width or girth complete all as specified and as directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mps as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed by Engr-in-Charge.

M&L for Cutting (straight, raking or circular) notches or holes of area not exc 20 sq. cm in Corrugated/plain GI/ steel sheeting complete all as specified and as directed by Engr-in-Charge.