REPAIR TO JOINERY, FLOORING, PLUMBING, SANITARY FITTINGS, SUNKEN FLOOR AND CERTAIN B/R WORKS IN OTM ACCN AT CAMERO COMPLEX AT SUBROTO PARK AND INTERNAL/ EXTERNAL PERIODICAL SERVICE (SMART PERIODICAL) OF CAMERO COMPLEX AT AF STATION SUBROTO PARK

Amount

S&F 15mm bore steel water tubing medium grade, galvanized ISI marked with all fittings fixed to wall & ceiling or laid in floors, Including taking down steel tubing or removing from site, complete all as specified and directed by Engineer-in-charge.

All as per item No 1 here in before but 20mm bore

Dismantling existing water tank and removing from site and S&F Rotational moulded PVC water tanks of 500 Ltr capacity, cylindrical vertical with closed top hoisted and fixed in postion including complete all as specified and directed directed by Engineer-in-charge.

Dismantling existing water tank and removing from site and S&F tripple layer rotational moulded vertical water storage tanks with closed tops ( cylinderical ) fix hoisted and in position 1000 ltr capacity including the existing GI fitting and pipe complete all as specified and directed by Engineer-in-charge.

Dismantling existing water tank and removing from site and S&F tripple layer rotational moulded vertical water storage tanks with closed tops ( cylinderical ) fixhoisted and in position 2000 ltr capacity including the existing GI fitting and pipe complete all as specified and directed by Engineer-in-charge.

S&F in repairs of ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed suitable for iron pipe 20mm bore having weight not less than 210 gms complete all as specified and directed

S&F in repair gate valves gun metal with iron wheel head screwed both ends for iron pipes and fixed in 20mm bore pipe complete all as specified and directed.

M&L for cleaning of rotational moulded polyethylene water storage tanks any size or shape or capacity hoisted and refixed in same position including date of cleaning with enamel white paint and if required necessary fittings complete all as specified and directed by Engr In Charge.

Demolition of brick work built in CM incl all quoins, pillars etc but excl ashlar facings, dressed stone work and precast concrete up to forth stories building height complete all as specified and directed by Engineer-in-charge.

M&L for brick work with subclass 'B' bricks, straight or curved on plan to any radius built in CM 1:6 complete all as specified and directed

M&L Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed by Engr In Charge.

M&L for 10 mm thick cement plaster in cement mortar 1:6 on brick surfaces on fair face of brick work and finished even and smooth without using extra cement upto 4 storey building complete all as specified and directed by Engineer-in-charge.

M&L for preparing surfaces of plaster on walls and applying two or more coats of plastic emulition paint over one coat of wall care putty including priming coat of primer applied upto 4 storey building height complete all as specified and directed by Engineer-in-charge.

M&L for Preparation of old or new painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint, upto 4 stories building height all as specified and directed by Engineer-in-charge.

M&L for providing applying two or more coats of plastic emulsion paint over a coat primer over applying 5mm thick on average POP (plaster of paris) punning on walls/ceiling over plaster surface/concrete surface to prepare the surface even and smooth, complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15mm bore long body bib taps, cast copper alloy, fancy type with crutchor butterfly handles, chromium plated, screwed down to iron pipes or for brass ferrule of complete all as specified and directed.

S&F in repairs 15mm bore angle valve ,stop valve, cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed both ends for iron pipe. complete all as specified and directed by Engineer-in-charge.

S&F in repair 15 mm bore pillar taps swan neck cast copper alloy, with capstan heads, chromium plated screwed down high pressure, fancy type complete all as specified and directed by Engr-In-Charge.

S&F in repairs 15mm bore pillar tap, fancy type,cast copper alloy, chromium plated, with capston heads screwed down, high pressure with or without lettered hot or cold with long screwed shames and fly nuts, complete all as specified and directed

S & F in repairs fancy type 15mm dia Brass CP wall mixer/basin hole mixer/sink mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed

S&F in repairs stainless steel rack for kitchen utensil made out of 22 gauge sheet & overall size 900mm x 750mm fixed to wall with scews complete all as specified and directed by Engr-inCharge.

S&F in repair stainless steel sink with drainage board made out of 1mm thick sheet for kitchen or laboratory with plug, washer, waste pipe etc including cast iron brackets, connecting union over all size 915mm X 460mm with bowl size 410mm X 330mm X 160mm complete all as specified and directed

S&F in repairs vitreous china wash hand basin of size 550mm x 400mm white, flat back including angle iron brackets with two coats of synthetic enamel paints including PVC waste pipe of 32mm dia of suitable length, PVC connection of 15mm dia & 450mm long with PTMT nuts, and 32mm dia brass waste fitting complete all as specified and directed by Engineer-in-charge.

S&F in repair vitreous china squatting pan “orrisa” pattern of size 580mmx440mm “white” with integral foot rest (excluding flushing cistern and flush pipe) incl provision of cement concrete bedding, ‘P’ trap 110mm dia connection to trap and flushing pipe, anti-syphonage complete all as specified and directed by Engineer-in-charge.

S&F in repairs viterious china wash down water closet pan (Pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) incl P or S trap etc complete all as specified and directed by Engineer-in-charge.

S & F Vitreous China bowl urinal flat back, size of 465mm x 355mm x 265 mm white (minimum) , with grating and union for discharge pipe providing and fixing plugs, bedding urinal aginst wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screw, pointing around urinal back in cement; with brackets, flush pipe, gratting and Union for discharge pipe including dismantling complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC flushing cistern of 10 ltr capacity valveless, symphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including flush pipe of 32mm bore PVC and connection to pipes etc and taking down existing flushing cistern complete all as specified and as directed by Engineer-in-Charge.

S&F as in repair of plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed

Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed by Engr In Charge.

S&F for PVC (SWR) pipes 110 mm single socketed, in any length with solvent cement joints fixed to walls/laid in floors complete all as specified and directed by Engr In Charge.

All as per item No 30 here in before But 75 mm dia.

S&F for 75 mm dia pvc pipe Stack clamps out of 50 mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof as complete all as specified and directed by Engr In Charge.

S&F for 110 mm dia pvc pipe Stack clamps out of 50 mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof as per complete all as specified and directed by Engr In Charge.

S&F for PVC SWR bends 110 mm dia complete all as specified and directed by Engr In Charge.

S&F PVC SWR bends 75 dia mm complete all as specified and directed by Engr In Charge.

S&F in repair brass hand shower( health faucet ) with 1.0 m long tube and hook complete all as specified and directed.

S&F in repair 32mm bore PTMT waste coupling fixed to waste pipe and wash hand basin complete all as specified and as directed by Engineer-in-Charge.

S&F as in repair for 15mm bore PVC connection 450mm long with brass nuts on both ends complete all as specified and directed

S&F in repair brass chromium plated shower rose 125mm size with or without swivel joint and fixed for 15mm bore pipe.

S&F as in repair steel Grating doom 125 mm dia with waste hole or without hole complete all as specified and directed

S&F in repair 100mm bore PTMT sink waste coupling fixed to waste pipe and wash hand basin complete all as specified and as directed by Engineer-in-Charge.

M&L in replacement of PVC waste pipe 75mm long, 32/40 mm bore complete all as specified and directed

S & F in repair PTMT long body bib tap 15mm dia pipe with crutch or butter fly handle screwed down, screwed for iron pipe and fixed complete all as specified and as directed

S & F in repair PTMT stop cock 15mm dia pipe with screwed for iron pipe and fixed complete all as specified and as directed

Demolition of cement concrete in sunken portion in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge

M&L providing and making fillet of 75mmx75mm in size with cement concrete in 1:2:4 in sunken portion including applying the under mentioned course of sunken treatement complete all as specified and directed by Engineer-in-Charge.:- (a) Surface shall be throughly wire brushed, cleaned, washed, dried up properly and apply evenly a bituminuous primer coat conforming to IS @0.4 ltr /Sqm over concrete / plastered roof surface. (b) Applying evenly a tack coat of bitumen 85/25 grade @1.20 kg/ sqm. (c) Laying of 3mm thick APP membrane sheet (min weight 3 Kg/Sqm) consisting of a core of 160 gms/Sqm polyster non woven fabric mat protected on both sides with a high quality polymeric asphaltic mix again protected with thermo fusible HMHDPE FILM on dried primed surface by torch application method. APP membrane will normally be laid in length at right angle to the direction of slope. The over lap shall be minimum 100mm on longitudinal direction and 150mm on the transverse direction including cuttings, grooves etc. (d) Membrane bonded completely to the substrate & the over laps are then scaled/fused by flame. (e) Including 10mm thick rendering with 1:4 using WPC. (f) Painting with two coats of water proofing paint with aluminium finish.

M&L for Refilling Lime concrete with brick aggregate (Course) in lime mortar 1:3, 300mm thick in the sunken with the help of proper tools equipments & plants complete all as specified and as directed

M&L for Providing and making cement concrete in 40mm thickness in 1:2:4 type B-0 (using 12.5mm graded stone aggregate) mixing with water proofing compound Complete in sunken upto the below level of tiling complete all as specified and directed.

S&F in repairs Vitreous China wash basin white ovel shape counter top of size 630x450mm complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs 32mm dia Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed

S&F in repairs one piece wall mounted Vitreous China wash down water closet pan, white (including fixing bolts, Push cock flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, Plastic water closet seat, black / white , closed pattern with flat bottom, jet spray with necessary fixing and cover and mild steel chromium plated or aluminised hinging device etc. complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs mild steel CP paper holder of approved make complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs brass CP towel ring of approved make complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs mild steel CP Soap dish of complete all as specified and as directed by Engineer-in-Charge.

S&F as in repair corner/front glass shelf with bracket complete all as specified and directed.

S&F as in repairs stainless steel cloth hanging hooks set of six hooks complete all as specified and directed by Engineer-in-charge.

Dismantling stone slab and granite of any description or thickness in floors etc and removing the debries outside the MOD land up to forth stories building height complete all as specified and directed by Engineer-in-charge.

M & L for 15 mm thick screed bed or bedding layer of cement mortar (1:4), for laying of granite and marble complete all as specified and directed by Engr-in- Charge.

M&L for pure black Granite (of any type) tiles 20mm (+-2mm) thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including moulded of edges grinding and polishing complete all as specified and directed by Engr-in-Charge.

M&L for green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade to match the shade of marble stone including moulded of edges grinding and polishing complete all as specified and directed by Engr-in-Charge.

M&L Glazed ceramic coloured tiles in vertical surface 300mmx600mmx9-10mm/ 300mmX 450mmX 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl back plaster 10 mm thick in cm 1:4 including dismantling complete all as specified and directed by Engr- in- Charge.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not xceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:4) including dismantling complete all as specified and directed by Engr-in -Charge.

M&L Virified Ceramic light shade tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.36 but not exceeding 0.72 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match flooring( in any pattern) and jointed with neat cement slurry over 15 mm thick cement screed in CM 1:6 and pointed with coloured cement matching with surfaces of tiles as in floor including vertical surface of wall such as skirting incl 10mm thick cement plaster (1:4) as in backing coat of tiles including dismantling complete all as specified and as directed by Engr-In-Charge.

M&L Virified Ceramic light shade tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match flooring( in any pattern) and jointed with neat cement slurry over 15 mm thick cement screed in CM 1:6 and pointed with coloured cement matching with surfaces of tiles as in floor including vertical surface of wall such as skirting incl 10mm thick cement plaster (1:4) as in backing coat of tiles and including dismentling complete all as specified and as directed by Engr-In-Charge.

M&L 75 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base for floors finishes complete all as specified and directed by Engr In Charge.

M&L for Chequered cement concrete tiles (rubber moulded with gloshy finishing) with grey cemet and pigments 30cm x30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with 15mm thick bedding layer of cement sand mortar (1:6) including dismantling complete all as specified and directed by Engr In Charge.

S&F precast machine pressed PCC interlocking paver block of 80 mm thickness, M-40 grade of any shape and size confirming to IS -15658-2006 with grey cement and pigment as approved and rough to receive floor topping including dismantling complete all as specified and directed by Engineer-in-Charge.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed

M&L Machine pre polished cut kota stone slab 20 mm(+-2mm) thick in tread of steps, and similar over cement screed 20 mm thick in cm 1;4 base laid and jointed with grey slurry mixed with pigment to match the slab polishing as per up to four stories height including dismantling complete all as specified and directed by Engr In Charge.

All as per item No 69 here in before but riser on stair case, skirting on walls etc incl the surface with . jointed with grey slurry mixed with pigment to match the slab including rubbing and polishing.

M&L for exterior (out door) wall tiles 350mmX250mmX7 to 8mm or 300mmX 450mmX 7mm to 8mm thick on vertical surface, jointed in neat cement slurry and pointed in white or colour cement to match with tiles incl back plaster 10 mm thick in cm 1:4 with WPC including dismentling complete all as specified and directed by Engr In Charge.

Demolition of cement concrete (unreinforced ) of any description and in any position not other wise specifically provided complete all as specified and as directed

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection, path/hardstanding/subbase etc complete all as specified and directed .

S&F as in repair pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws as specification complete all as specified and directed by Engr In Charge.

S&F as in repair pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws as specification complete all as specified and directed by Engr In Charge.

S & F as in repair of mild steel sections as in main and cross beams, hip and jack rafter, purlins where connected to common rafters, running rails, grills, coolar stand, drain cover,chajja, guides for sliding doors fixed with angle cleat and other connecting plates conforming to Fe-290 Grade E-165 including dismentling complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.50 Sqm each making the existing surface good with 1:4 CM complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5Sqm but not exc 4.00 Sqm each complete all as specified and as directed by Engineer-in-Charge.

S&F for size 105mmx60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, hold fast, lock strike plate, etc complete all as specified and directed by Engr In Charge.

S&F for size 125mm x 60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, hold fast, lock strike plate, etc. complete all as specified and directed by Engr In Charge.

M & L for cement concrete 1:3:6 type C-1 (using 12.5 mm graded stone aggregate) filling in door and windows frames, any size, single or double rebated, including arrangement for fixing of hinges and fixtures as required complete all as specified and directed by Engr In Charge.

S&F for 35 mm thick II nd Class hardwood Glazed and skeleton shutters, open rebated and with prepared to receive wire cloth (gauze), etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engr In Charge.

S & F 30 mm thick factory made plain framed, Flush shutters, solid core construction, with block board core and plywood face panels, commercial particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engr In Charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification complete all as specified and directed by Engr In Charge.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face complete all as specified and directed by Engr In Charge.

S&F 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete and specified and directed by engr-in -charge.

S&F 150mm long aluminium handle with plate cast type polished bright complete and specified and directed by engr-in -charge.

S&F 100 mm long butt hinges medium weight, stenless steel, and fixed complete and specified and directed by engr-in -charge.

S&F for 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete and specified and as directed by engr-in -charge.

S&F for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete and specified and as directed by engr-in -charge.

S&F as in repair aluminium powder coated any colour (minimum thickness of powder coating 50 micron) for doors, windows, partician, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed by Engineer-in-Charge.

S&F aluminium powder coated an (minimum thickness of powder coating 50 micron) as in window and ventilator shutters, sliding type three track, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber packing, anodised aluminum snap beading screws etc complete all as specified and as directed by Engr-In-Charge.

S&F for powder coated aluminium doors shutters,( thickness of powder coating not less than 50 micron) alumonium section weighing 0.55 kg/m incl necessary joining cleats, glazing clips, rubber neoprene packing , handels 2 Nos in each door , hinges, anodised aluminium snap beading screws etc. complete all as specified and directed by engr-In-Charge.

S&F as in repair 12mm thick particle board prelaminated on both sides as in panel of door shutters partition wall, work stations including beading etc. complete all as specified and directed by Engr-in-Charge.

S&F as in repair Aluminium(extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repair brass body Mortice lock, vertical type,size 100 mm 4 lever, incl escutcheon plate and two No keys fixed complete all as specified and directed by Engr-in-Charge.

S&F in repair white Upvc Door Locks with key - High security polished finish long functional life stable performance fine touch complete all as specified and directed by Engr-in-Charge.

S & F in repair 150mm long floor door stopper of aluminium alloy and tongue with hard drawn steel spring complete all as specified and as directed by Engineer-in-Charge.

Material and labour for false ceilings using GI snap grid system with roll-formed out of hot dip galvanised steel caping (powder coated) main runner 38 x 24 mm , cross Tee 29 x 24 mm and wall angle 24 x 24 mm members suspended with 4mm dia GI wire, carry maximum load up to 8.10 Kg/Sqm with 4mm thick designer ceiling board fixed with screw as per manufacturers instructions size 595 x 595mmx 4mm thick any texture (Lake and Hill, oceaniccascade or Electra) as approved by GE at any height including dismantling complete all as specified and as directed by Engr-In-Charge.

M &L for PVC profile for wall panelling colour / shade as approved size 250mm wide, 08 mm over all thick with 1 mm wall thickness fixed with screw to mild steel square ( size 20mmx 20mmx 1mm thick) tubler frame work including one coat of red oxide primer, fixed to walls and including dismantling complete all as specified and directed by Engr-in-Charge.

M&L for PVC profile corner beading L/T type for wall panelling, colour/shade matching with wall panelling including dismantling complete all as specified and directed by Engineer-in-Charge.

M&L for removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) of SSR-2020 Part-II to a distance of 15km, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed by Engineer-in-Charge.

S&F in repairs PVC cabinet mirror of size 470 mm x 570 mm x 120mm complete all specified and directed by Engr-in-Charge.

Dismantling boarding, any description, fixed in any position, any thickness & any type, complete all as specified and directed by Engineer-in-charge.

S&F factory made 18mm(+0.7mm) thik celuka PVC Ply of density 600kg/cbm manufactured by an ISO-900-2008 certified company.One side prelam and other side plain 18mm thick Celuka PVC ply for kitchen cabinet and cupboards shutter and also manufacturer's test report and test certificate is mandatory with each and every supply of the materail complete as per directions of Engineer-in-charge,manufecturer's specifications and drawing.

S&F factory made 18mm(+0.7mm) thik celuka PVC Ply of density 600kg/cbm manufactured by an ISO-900-2008 certified company.Plain 18mm thick Celuka PVC Ply for Shelf/Partitions/Drawer and also manufacturer's test report and test certificate is mandatory with each and every supply of the materail complete as per directions of Engineer-in-charge,manufecturer's specifications and drawing.

S&F continous piano hinges, mild steel, bright finish or electrogalvanised of width of flap 30mm complete all as specified and directed

M &L for 125 mm magnetic catches with brass body and striking plate including letting in and fixed complete all as specified and directed by Engr-in-Charge.

S&F 100 mm size Stainless Steel handle complete all as specified and as directed by Engr -in - Charge.

S&F in repair 100 mm size Stainless Steel handle complete all as specified and as directed by Engr -in - Charge.

S&F in repair 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete and specified and directed by engr-in -charge.

S&F in repair 150mm long aluminium handle with plate cast type polished bright complete and specified and directed by engr-in -charge.

S & F in repair 25 mm dia Stainless steel powder coated curtain rod including all necessary fixing arrangement like clamps, end brackets, end to end bracket and eight nos rings per meter complete all as specified and directed by Engr In Charge.

S&F in repair for double action floor spring hydraulically regulated mode lap of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed to shutter complete all as specified and directed.

Taking down cement plaster of any description on brick or concrete surfaces of walls or ceiling etc incl. raking out joints ,hacking for key and scrubbing down with water upto 4 storeys building, complete all as specified and directed by Engineer-in-charge.

M&L for 15 mm thick cement plaster in cement mortar 1:4 on concrete or brick surface and finished even and smooth without using extra cement upto 4 storeys building with water proofing compound complete all as specified and directed by Engineer-in-charge.

M&L for 5 mm thick cement plaster in cement mortar 1:3 on concrete or brick surface and finished even and smooth without using extra cement as in ceiling complete all as specified and directed by Engineer-in-charge.

M&L for preparing surfaces of new plaster Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), complete all as specified and directed by Engineer-in-charge.

M&L for preparation of new surface and applying two coat of distemper on wall with alkali resistant priming paint over a coat of wall care putty complete all as specified and directed by Engineer-in-charge.

M&L for complete removal of existing treatment under (OBD/Oil paint/ white wash etc) by scrapping with mechanical wall sander on wall/ceiling (having mechanical vacuum mechanism) having RPM not less than1500, sending pad of 80 grit having dia of 7"/9" to make the surface free from dust, loose paint , removal of nails etc and filling cracks/ holes and windows /doors jams by putty & repairs in good shape by skilled labour upto 4 storeys building complete all as specified and directed.

M&L for waterproof cement based putty @ 1KG (undiluted) per square meter of average thickness 1-2 mm over the plastered/Old painted wall /ceiling surcafes to make the surface free from dust upto 4 storeys building etc, by skilled labor as per following steps :- Step 1 :- Mix the putty powder by adding water as per manufacturer instructions and mix it with wall mixture with the mixing capacity of minimum 2.5 kg putty per minute Step 2 :- Applying the first coat of prepared mixture with the help of fully automatic airless spray machine of putty application having flow speed of maximum 6 liters per minute with a maximum pressure of 3300 PSI Step 3 :- Allow 6-8 Hrs time to dry the putty surface.

M&L for applying two coats of oil bound distemper on wall/ceiling surfaces using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 Mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface upto 9 storeys building complete all as specified and directed.

M&L for applying one coats of oil bound distemper on wall/ceiling surfaces using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 Mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface upto 9 storeys building complete all as specified and directed.

M&L for prepration of old plastered or unplastered surfaces of walls and applying one coat of approved shade of oil emulsion distemper, including repairing of pot holes and cracks complete all as specified and directed by Engr-in-Charge.

M&L for prepration of old plastered or unplastered surfaces of ceiling and applying one coat of approved shade of oil emulsion distemper, including repairing of pot holes and cracks with putty,complete all as specified and directed by Engr-in-Charge.

M&L for applying one coat of super quality weather proof exterior emulsion paint using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 Mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and accessories for applying paint should be able to spray in hard to reach areas and penetration of paint on the surface on the surface upto 4 storeys building complete all as specified and directed.

M&L for applying two coats of super quality weather proof exterior emulsion paint using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 Mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and accessories for applying paint should be able to spray in hard to reach areas and penetration of paint on the surface up to 4 storeys building complete all as specified and directed.

M&L for prepation of old painted wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel Paint, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted concrete surfaces/brick surface of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.

Removing plant including roots by dismantaling of brick work PCC/RCC including necessary scaffolding any type in any location/position i.e roof , parapet wall near pipes etc and applying acid after removing roots for preventing the regrowth and making good of disturbed portion using PCC 1:2:4 type B0 & 10mm thick plaster in CM 1:3 size of disturbed portion 150mmx 150mm x 200mm complete all as specified & directed

M/S MG GROUP (BID ID -3434645)

Ashish Sehgal and Co. (BID ID -3434578)