Loading…
Loading…
Tender Value
₹1.3 Cr
EMD Value
₹2.5 L
Closing Date
15 Jun 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (WMS)
RCF HQ
15 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.(See detail in tender document)
(i)(a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender. (b) (i) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b (i): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b) (ii) In such cases, what constitutes a component in a composite work shall be clearly predefined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (iii) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contract or through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway.
In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer in writing. Note for Item 1.4.1 : Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered atleast 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Defination of Similar Work :- "Any civil engineering work (excluding track work, horticulture work, sanitation work, material supply work)"
9 conditions · 4 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
All credential documents submitted through DSC i.e. all document received in E-tenders , will be treated as self attested by tenderer & considered valid for evaluation and there will be no compulsion of manual attestation.
Annual civil maintenance of service building and residential building in West colony and other assets RCF, Kapurthala (Zone work-2026-27).
RCF-CE-WA-EOT-15-26-27
RCF-CE-WA-EOT-15-26-27
Open
Works - General
12 Months
Kapurthala, Punjab
₹0
₹2.5 L
15 Jun 2026
25 May 2026
1 Jun 2026
107 items across 4 schedules · ₹66,66,652.13 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | P/F roller blinds for window of make Deck,NL (ZG-08043 series) or equivalent of approved shade,colour,fabric,quality etc. as approved by the engineer-in-charge including all necessary fittings etc. complete job as per the direction of Engineer-in-charge. | Sqm | 20.00 | 1,532.53 | 30,650.6 |
| 2 | Supply of synthetic resin adhesive of approved quality, brand and manufacture as per the relevant IS:code (if any) in 5/10 Kg packing. | Kg | 20.00 | 125.53 | 2,510.6 |
| 3 | Supply of Plain Glass 3 mm thick as approved quality. | Sqm | 2.00 | 181.33 | 362.66 |
| 4 | Supply of glass putty of approved quality,brand and manufacture as per the relevant IS:code (if any). | Kg | 100.00 | 18.32 | 1,832 |
| 5 | Supply of 15 mm dia CP Brass Pillar Cock of NOVA, ESS-ESS or Regel make. | Each | 20.00 | 317.54 | 6,350.8 |
| 6 | Supply of 25 mm dia PVC waste pipe with 32/40 mm dia cup as approved quality. | Each | 200.00 | 44.15 | 8,830 |
| 7 | Supply of brass Spindle(heavy duty) for Pillar Cock confirming to IS:8934 and weight should not less than 80 gm. | Each | 70.00 | 48.23 | 3,376.1 |
| 8 | Supply of Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.51 mm (Mosquito Proof) as approved by engineer-in-charge. | Sqm | 150.00 | 123.88 | 18,582 |
| 9 | Supply M.S. helical door spring as per ISI standard. | Each | 50.00 | 67.28 | 3,364 |
| 10 | Supply of sealant of approved quality as per the relevant IS:code (if any). | Kg | 12.00 | 210.9 | 2,530.8 |
| 11 | Supply of PVC Cover for 500 litre PVC storage tank. | Each | 20.00 | 85.32 | 1,706.4 |
| 12 | Supply of Aluminium door stoper double leg (Heavy duty) of approved quality. | Each | 50.00 | 28.91 | 1,445.5 |
| 13 | Supply of Aluminium door stoper single leg 125mm long of approved quality. | Each | 30.00 | 29.11 | 873.3 |
| 14 | Supply of white vitreous china flat back wash basin size 550mm x 400mm of approved quality and make | Each | 20.00 | 419.29 | 8,385.8 |
| 15 | Supply of Ply wood 5 ply with commercial ply on both faces 4 mm thick of approved quality. | Sqm | 18.00 | 186.25 | 3,352.5 |
| 16 | Supply of measuring tape size 5.0 mtr make freeman, Ambika or equivalent as approved by engineer in charge. | Each | 5.00 | 86.96 | 434.8 |
| 17 | Supply of Stainless Steel AISI- 304 (18/8) kitchen sink (610mmx460mm bowl depth 200mm) without drain board as per IS: 13983 with C.I. brackets and stainless steel plug 40mm including all fittings and brackets,etc complete set. | Each | 15.00 | 2,834.15 | 42,512.25 |
| 18 | Supply of heavy duty PVC floor trap of 4'' dia. (outlet) x 2"dia (inlet) | Each | 50.00 | 70.72 | 3,536 |
| 19 | Supply of 600mm x 450mm mirror of exotic superior glass approved quality with brackets and all necessary fittings etc. complete | Each | 30.00 | 741.75 | 22,252.5 |
| 20 | Supply of CP Brass health foucet with lead 1:00 metre length of NOVA, ESS-ESS, onida or Regel make. | Each | 5.00 | 419.29 | 2,096.45 |
| 21 | Supply of PTMT(Poly Tetra Methylene Terephthalate) ball cock,15mm nominal bore,105mm long,weighing not less than138gm of approved quality,colour and make complete. | Each | 50.00 | 186.25 | 9,312.5 |
| 22 | Supply of PTMT(Poly Tetra Methylene Terephthalate) ball cock,20mm nominal bore,120mm long,weighing not less than198gm of approved quality,colour and make complete. | Each | 200.00 | 278.97 | 55,794 |
| 23 | Supply of PTMT(Poly Tetra Methylene Terephthalate) pillar cock,15mm nominal bore,107mm long,weighing not less than 110 gm of approved quality,colour and make complete. | Each | 80.00 | 192.03 | 15,362.4 |
| 24 | Supply of white, vitreous china flat back or wall corner type lipped front urinal basin of 430mmx260mmx350mm and 340mmx410mmx265mm sizes respectively of approved quality. | Each | 3.00 | 721.41 | 2,164.23 |
| 25 | Supply of 8mm thick water proof ply of approved quality conforming to relevant IS:code(if any) as per the directions of engineer- in-charge. | Sqm | 18.00 | 330.6 | 5,950.8 |
| 26 | Supply of 19mm thick ply of approved quality conforming to relevant IS:code(if any). | Sqm | 27.00 | 516.92 | 13,956.84 |
| 27 | Supply of Bright finished or black enameled mild steel screws 30 / 7 as approved by engineer-in-charge. | 100 Nos. | 3000.00 | 20.25 | 607.5 |
| 28 | Supply of Circular shape RCC Manhole Cover of size 550 mm dia. & 75mm thick. | Each | 1.00 | 517.23 | 517.23 |
| 29 | Supply of MS hooks and eyes: 150mm | Each | 10.00 | 7.71 | 77.1 |
| 30 | Supply of MS hooks and eyes: 100mm | Each | 10.00 | 7.71 | 77.1 |
| 31 | Supply of PTMT Shelf 450 mm long of approved quality, colour and make. | Each | 24.00 | 413.26 | 9,918.24 |
| 32 | Supply of PVC flushing Cistern fitting complete of approved quality, colour and make etc. | Each | 50.00 | 307.7 | 15,385 |
| 33 | Supply of Circular shape RCC Manhole Cover of size 660 mm dia, & 115 mm thick | Each | 1.00 | 709.75 | 709.75 |
| 34 | Supply of Rectangular shape RCC Manhole Cover of size 600mmx500mmx75mm. | Each | 5.00 | 562.06 | 2,810.3 |
| 35 | Supply of Rectangular shape RCC Road Gully Cover of size 610mmx560mmx75mm | Each | 6.00 | 650.68 | 3,904.08 |
| 36 | Supply of Square shape RCC kitchen drain Cover of size 300mmx300mmx50mm | Each | 8.00 | 300.31 | 2,402.48 |
| 37 | Supply of dhaga of approved quality, brand and manufacture as per the relevant IS:code (If any) | Each | 150.00 | 2.94 | 441 |
| 38 | Supply of brass jumper valve of approved quality as per the relevant IS:code(if any) | Each | 100.00 | 3.9 | 390 |
| 39 | Supply of PTMT shower of approved quality, colour and make of Prayag or equivalent as approved by engineer in-charge | Each | 20.00 | 169.85 | 3,397 |
| 40 | Supply of PVC Pipe 63 mm dia of 6 kg/cm2 pressure ISI marked (if any) | Each | 18.00 | 104.19 | 1,875.42 |
| 41 | Supply of ratched threading die size upto 2" with threading gutka of make Rainbow or equivalent as approved by engineer in charge. | Each | 1.00 | 1,347.47 | 1,347.47 |
| 42 | Supply of PVC Pipe 90 mm dia of 4 kg/cm2 pressure as ISI marked (if any). | Metre | 18.00 | 155.88 | 2,805.84 |
| 43 | Supply of dry wall screw (self tapping) with black, 20mm long of approved quality. | 1000 Nos. | 2000.00 | 319.99 | 639.98 |
| 44 | Supply of dry wall screw (self tapping) with black, 25mm long of approved quality. | 1000 Nos. | 5000.00 | 342.16 | 1,710.8 |
| 45 | Supply of dry wall screw (self tapping) with black, 38mm long of approved quality. | 1000 Nos. | 5000.00 | 590.78 | 2,953.9 |
| 46 | Supply of silicon syphon washer (white) shape :round,hole size : 15mm of approved quality (having 12 no's piece in each packet). | Packet | 10.00 | 56.72 | 567.2 |
| 47 | Supply of waste fitting for kitchen sink ( size:50mm x 32 mm) of approved quality, colour and make . | Each | 50.00 | 119.79 | 5,989.5 |
| 48 | Supply of pipe wrench size 14" of make Everest, Pye, GB as approved by engineer in charge. | Each | 2.00 | 366.09 | 732.18 |
| 49 | Supply of oxidised M.S. hasp and staple (Safety type) conforming to IS : 363 - with necessary screws etc. complete of size -150mm | Each | 20.00 | 18.02 | 360.4 |
| 50 | Supply of oxidised M.S. hasp and staple (Safety type) conforming to IS : 363 - with necessary screws etc. complete of size -115mm | Each | 20.00 | 13.94 | 278.8 |
| 51 | Supply of PVC Pipe Tee 4'' x 4'' x 2'' of heavy duty of approved quality | Each | 30.00 | 266.66 | 7,999.8 |
| 52 | Supply of Bright finished or black enameled mild steel screws 35 / 8 as approved by engineer-in-charge. | 100 Nos. | 4000.00 | 23.37 | 934.8 |
| Schedule total | ₹3,36,358.7 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Tenderconditionsforworks15.pdf Tender Document
ATTACHMENT
SpecialData15.pdf
ATTACHMENT
Tenderconditionsforworks15.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .