Construction of room and allied works for already installed submersible pump at FPF Gamma Unit J02 Sidhra

Amount

Earth work in excavation by manual means for foundations, drains, pipes, cables etc. (not exceeding 1.5m in width) and for shafts wells cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5 M including the disposal of excavated earth upto 1 M from the cutting edge, disposed earth to be levelled and neatly dressed in All kinds of soil. complete Job.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:5:10 (1 Cement : 5 coarse sand :10 graded stone aggregate 40 mm nominal size) including all leads, lift, carriage complete Job.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) including all leads, lift, carriage complete Job.

Dumping of stone including supply and laying in position cement concrete of specified grade including all leads, lift, carriage complete Job.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all leads, lift, carriage complete Job.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m. complete Job.

Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in superstructure above plinth level upto floor V level. (By manual means) in Cement mortar 1 :6 ( 1 cement : 6 coarse sand) including all leads, lift, carriage complete Job.

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level complete Job.

Centering and shuttering including strutting, propping etc. and removal of form for : foundations, footings, bases of columns, etc. for mass concrete complete Job.

Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders,bressumers and centilevers. complete Job.

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60mm thickness, including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.60mm pressed, mild steel welded or rigidly fixed together by mechanical means, including M.S pressed butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile B Fixing with adjustable lugs with split end tail to each jamb complete Job.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to steel windows by welding complete Job.

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) Powder coated aluminum (minimum thickness of powder coated 50 microns) For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings included.) double rebate frames including Aluminium Grill complete work as per direction of Engg in charge at site. 2mm thick

Providing and fixing 250mm x10mm aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete Job.

Providing and fixing 100mmx10mm aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 asper IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete Job.

Providing and fixing 125 mm aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete Job.

Providing and fixing 100 mm aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete Job.

Providing and fixing aluminium hanging floor door stopper lSI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :Twin rubber stopper complete Job.

Providing and fixing aluminium Designer Earl 8" Heavy duty complete Job.

12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) including all leads, lift, carriage complete Job.

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 coarse sand) including all leads, lift, carriage complete Job.

Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand .: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete 50 mm thick with 20mm nominal size stone aggregate. Crushed. including all leads, lift, carriage complete Job.

Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including water thinnable priming coat to give an even shade complete Job.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work complete Job.

Strctural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, as per the approved Strl. Design all complete. welded.

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and Trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gram/m2- Coloured complete Job.

Providing and fixing Service Line(Aluminium 25mm) complete Job.

Providing and fixing MCB -16 Amp. complete Job.

Providing and fixing MCB -10 Amp. complete Job.

Providing and fixing Wiring for light point/exhaust fan point/ ceiling fan/power point/5 inch dia fan box/concealed box with round sheet cover with 1.5/2.5/ 4mm FRLS PVC insulated copper conducter single core cable in surface/recessed medium class PVC conduit 2mm,with modular switch,modular plate suitable GI box as required. Make:- Make:- Anchor/ Indoasian/ Havells or equivalent including switches and power points complete Job.

LED saver 14 watt of approved quality Make:- Anchor/Havels/Orient etc. complete Job.

Providing,Installation,testing and commissioning of cieling fan 48". Size of Bajaj, Orient, Khaitan, Usha or Polar brand and manufacturers. complete Job.

Vinayak sharma

M/S ATUL KOHLI