WELCOME MAINTENANCE AND CERTAIN REPAIR AT AF STN BIKANER

Amount

Taking down cement plaster any description on brick/concrete surfaces etc including raking out joints hacking for key, scrubing down with water etc complete all as specified and as directed.

M&L rendering 15mm in cement mortar 1:4 on fair faces of brick / concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

Material and labour rendering 15 mm in cement mortar 1:6 on fair faces of brick or concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L rendering 5 mm in cement mortar 1:3 on fair faces of brick /concrete surface of ceilling and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper (white or tinted) over a coat of alkali resistant primer complete all as specified and directed.

M&L preparation of newly plastered surfaces of ceilling / chajja or similar suspended work and applying two coats of white wash complete all as specified and directed.

M&L preparation of newly plastered surfaces of walls including all cornices, pilasters etc and applying two coats of acrylic exterior emulsion apex paint in camouflage pattern of approved tint / shade(s) over and including a coat primer complete all as specified and directed.

Materail and Labour for preparation of plastered or unplastered old surfaces of walls using necessary filling compound of putty to obtain smooth regular/even finish using sand paper and applying two coat of oil bound distemper on walls all as specified and as directed by Engr-in-Charge.

Materail and Labour for preparation of plastered or unplastered old surfaces of ceiling using necessary filling compound of putty and applying two coat of white wash on ceiling all as specified and as directed by Engr-in-Charge.

M&L for Complete removal of existing/old treatment by mannualy and mechnically and preparation of surfaces using necessary filling compound of to obtain smooth regular/even finish using sand paper and applying two coat of exterior emulsion paint (tint as approved by GE ) on wall height upto 7.0 mt. and any position complete all as specified and directed by Engineer - in- charge.

Demolition of brick or stone masonary built in cement mortar incl all quoins, arches, pillar etc. complete all as specified & directed.

M&L for brick work burtnt clay with old size sub class "B" brick straight or curved on plan exc 6 m mean radius and built in cement mortar 1 : 6, complete all as specified and as directed.

M&L preparation of plastered or un plastered old decorated surfaces of walls by brooming down or steel wire brushing scrapping down smoke soot, moulds , moss efflorescent salts & trading oil , greasy spots and filling cracks/holes and applying one coat distemper oil emulsion white or coloured, complete all as specified & directed by Engineer-in-Charge

M&L for preparation of plastered or un plastered old decorated surfaces of walls by brooming down or steel wire brushing scrapping down smoke soot, moulds , moss efflorescent salts & trading oil and greasy spots and filling cracks/hole and applying one coat of white wash on ceiling upto 4th floor complete all as specified & directed by Engineer-in-Charge

M&L for preparation of plastered or un plastered old decorated surfaces of walls by brooming down or steel wire brushing scrapping down smoke soot, moulds , moss efflorescent salts & trading oil and greasy spots and filling cracks/hole and applying one coat of exterior emulsion paint (tint as approved by GE ) on wall height upto 7.0 mt. and any position complete all as specified and directed by Engineer - in- charge.

M&L preparation of old painted wood or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint (1st quality) complete all as specified & directed. Note: Contractor shall procure 50% of Synthetic enamel paint required for entire work of this item within 15 days of Date of Commencement of Work and shall keep in safe custody as directed by Engineer-in-Charge for incorporation in the works. The tenderer shall keep this aspect in mind while quoting the rates.

M&L preparation of old painted wood or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint (1st quality) over Filler coat with grey filler or liquid wood filler, transparent, and bringing forward surfaces to smooth even finish complete all as specified & directed. Note: Contractor shall procure 50% of Synthetic enamel paint required for entire work of this item within 15 days of Date of Commencement of Work and shall keep in safe custody as directed by Engineer-in-Charge for incorporation in the works. The tenderer shall keep this aspect in mind while quoting the rates.

M&L preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint (1st quality) incl for angle iron,fencing post,Rolling shutter etc. complete all as specified & directed.Note: Contractor shall procure 50% of oil emulsion distemper required for entire work of this item within 15 days of Date of Commencement of Work and shall keep in safe custody as directed by Engineer-in-Charge for incorporation in the works. The tenderer shall keep this aspect in mind while quoting the rates.

M&L preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint (1st quality) incl for angle iron,fencing post,Rolling shutter etc. complete all as specified & directed.Note: Contractor shall procure 50% of oil emulsion distemper required for entire work of this item within 15 days of Date of Commencement of Work and shall keep in safe custody as directed by Engineer-in-Charge for incorporation in the works. The tenderer shall keep this aspect in mind while quoting the rates. Nothing extra on this account shall be entertained.

Hacking out old broken glass (any th size, quality or description) from wooden or steel frames glazed with putty or fixed with wooden beads complete all as directed.

S&F sheet glass 4mm thick ordinary quality and glazing with oil putty or with clip in squares n.ex.c. 0.50sqm in each pane complete

S & F sheet glass 4mm thick ordinary sheet glass exc 0.5sqm in each pane, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and removal complete all as specified and directed.

M & L for coluored Virified Ceramic tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed CM 1:6, complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7-8 mm thick, (square/rectangular) area of each tile exc. 0.11 but n.exc. 0.18 sqm, as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed in CM 1:6, complete all as specified and as directed.

M & L for joint free glazed coloured ceramic coloured tiles of 350mm x 250mm x 7mm /450X 350X 7mm thick on vertical surface of walls set and jointed with neat cement slurry and pointed in white/coloured cement to match the shade of tiles, over and including 10mm thick rendering in CM 1:4, all as specified and directed by engr-in charge.

Dismantling stone and tiles of any description or thickness in floor aprons etc

M & L as in repair machine cut Granite slab 20 mm thick fixed as in repairs for steps, pillars, window cills, cooking plateforms and like and incl 10mm thick (avg thickness) cement mortar 1:4 screeding and setting coat in cement morter 1:2, 3mm thick, set and jointed with white/coloured cement to match the shade of slab incl cutting, waste, rubbing and polshing etc complete all as spd.Note:- (i) The rate of granite stone shall be deemed to incl for full rounded off corner/edges incl all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and polishing machine and granite polishing to achive the desired granite finish all as spfd.

Taking down chowkhats with shutter without taking off shutters from the frames (area n. exc. 1.50 sqm each) incl making good the disturbed surfaces complete all as specified & directed.

S&F anodised aluminium powder coating aluminium section weighing not less than 0.55Kg/m {minimum thickness of powder coating 50 micron)frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified

S&F anodised aluminium Powder coating window and ventilator shutters, side hung type without sash bars aluminium section weighing not less tha 0.55Kg/m (with style and rail of size 47.62 x 44.45 x 1.67mm)including necessary joining cleats, glazing clips, ruber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150mm long (1no), hinges type B-21 100mm long(2 no.) suitable handle(1 no) including all necessary builders hardare complete all as specified.

Supplying & fixing in opening solid PVC door frame of size 50mm x 47mm made out 5mm plain colour PVC sheets re-inforced with MS tube Square tube, suppling & fixing in opening complete all as specified & directed

M&L factory made solid panel pvc door shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottam rail . paneling of plain colour PVC sheets to be filted in MS frame welded, sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with the solvent cement complete all as spd.

Supply and fixing Mild steel butt hinges medium weight , clod rolled, 75mm, ISI marked, complete all as specified & directed.

Material & Labour barrel tower bolts aluminium anodised extruded section of size 100 mm complete all as specified & directed.

Supply and fixing aluminium fabricated type extruded handles of size 100mm complete all as specified & directed.

Taking down chowkhats with shutter without taking off shutters from the frames (area exc. 1.50 sqm but n. exc. 4.00 sqm each) incl making good the disturbed surfaces complete all as specified & directed.

Material & Labour for pressed steel frames for doors of size 125 x 60 mm for doors with one or more rebate incl necessary fixing lugs, hinges, lock, strike plates of 50 x 3mm welded with frame and making arrangement for fixing of door spring etc complete all as specified.

Material & Labour for pressed steel frames for doors of size 105 x 60 mm for doors with one or more rebated incl necessary fixing lugs, hinges, lock, strike plates of 50 x 3mm welded with frame for making arrangement for fixing of door spring etc. complete all as specified.

Supply and fixing plain, framed, Plain framed, panelled shutter (two panel) 35 mm thick of 2nd class hardwood rail and style with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated incl one coat of pink primer complete all as specified & directed.

Supply and fixing glazed and gauged skeleton shutters 35mm thick, 2nd class hard wood 'Hollock' open rebated and prepared to receive glass, gauge etc (with sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc incl priming coat. The size of member of shutters as spd in SSR Part-1 Section 8 clause 8.20 (b) incl kiln seasoned and chemically pressure treated, complete all as specified & directed.

Supply and fixing Galvanised mild steel wire cloth, in new doors and windows 0.56mm nominal dia of wire and avrg widh of aperature 1.18mm incl fixing to wooden/steel frames with tinned tacks or galvanised wire or wooden bead complete all as specified & directed.

Supply and fixing Galvanised mild steel wire cloth, as in repairs, 0.56mm nominal dia of wire and avrg widh of aperature 1.18mm incl fixing to wooden/steel frames with tinned tacks or galvanised wire or wooden bead complete all as specified & directed.

Material and labour for Welding works in repairs of steel surfaces n. exc 2.5cm in length and not exc. 6mm thick complete all as specified.

Material and Labour for preparation of new surfaces of wood & wood based surface of any description not otherwise described, over 10 cm width & girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and Labour for preparation of new steel & steel based surface of any description not otherwise described, over 10 cm width & girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

Material & Labour barrel tower bolts aluminium anodised extruded section of size 200 mm complete all as specified & directed.

Material & Labour barrel tower bolts aluminium anodised extruded section of size 200 mm fixed as in repairs complete all as specified & directed.

Supply and fixing aluminium fabricated type extruded handles of size 150mm complete all as specified & directed.

Supply and fixing aluminium fabricated type extruded handles of size 150mm fixed as in repairs complete all as specified & directed.

Supply and fixing 300 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing cleap of sheet, cast or extruded sections, bolt not less then 12mm dia with and including a minimum of 6 bolt and nuts ,fixed on plate or staple plate complete all as specified & directed.

Supply and fixing in repairs 300 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing cleap of sheet, cast or extruded sections, bolt not less then 12mm dia with and including a minimum of 6 bolt and nuts ,fixed on plate or staple plate complete all as specified & directed.

Dismantling boarding any description fixed in any position with screws, complete all as specified and as directed.

S&F 18/19mm thick prelaminated particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work/ steel chowkhats as in kitchen cabinet / cubboard shutter complete all as spd and directed by Engr-in-Charge

Taking down shutters of any description n. exc 1 sqm from chowkhat and removing to or from store as required complete all as specified.

M & L for Factory Made Solid PVC Moulded Shutter 21mm thick having 19mm thick celuka ply with 2mm thick decorative PVC Sheet on front face(color and design of sheet approved by Engr-in-charge),supplying & fixing in frame at site and including taking down chowkhats with shutter as per specification & drawing complete all as specified & directed.

Supply and fixing in repair 40mm dia cupboard knobs fixed with nut screw and washer of mild steel bright finished

Supply and fixing in repair 40mm width of flaps continuous (piano) hinges mild steel bright finish or electrogalvanised.

Dismantling water tanks and removing from site of 500 litres capacity complete all as specified and directed.

Dismantling water tanks and removing from site of 1000 litres capacity complete all as specified and directed.

S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I all as specified and directed

S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I all as specified and directed

Taking up or down 15 mm dia steel tubing and connection and removal from site complete all as specified and directed.

Taking up or down 20 mm dia steel tubing and connection and removal from site complete all as specified and directed.

Supply and fixing 15mm bore tubes "medium grade" galvanized with and incl all fittings complete to walls and ceiling with necessary clamps or laid in floors complete all as specified & directed.

Supply and fixing 20mm bore tubes "medium grade" galvanized with and incl all fittings complete to walls and ceiling with necessary clamps or laid in floors complete all as spd & directed.

Cutting chases, pining in making good to facings where required & pointing in cement mortar1:3 to ends etc or edges of landings, steps cills,sunshades, shelves,lintels,etc and cutting chases for concealed water tubing and making good,cutting n.exc. 10cm girth in brick walls all asdirected.

Cleaning and removing all scale and dirt, etc, from water tanks, capacity exceeding 250 litre but not exceeding 500 litre and from mouths of circulating pipes etc. by emptying, drying, cleaning by scrubbing the dust with wire brush from tank by removing inlet and outlet pipe and refixing inlet and outlet pipe with new tank connection fitting in the same position after cleaning and marking the date of cleaning on the tank with paint complete all as specified and directed. Note : (a) Letter or figures (Block. Roman) of 5 cm high and min 5mm wide such as "CLEANED ON DD/MM/YY" shall be written on service water tank . (b) Cleaning shall be done every six months interval complete all as specified and directed.

All as per description of Item No. 68 .00 here-in-before but capacity of tank exceeding 500 litre but not exceeding 1000 litre.

Supply and fixing in repairs fancy type angle stop valve, chromium plated,screwed down, high pressure with crutch or butterfly handle screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed.

Supply & fixing in repairs PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.

Supply and fixing in repairs long body Bib taps,chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, suitable for 15mm bore pipe complete all as specified and directed.

Supply and fixing as in repair PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC bend for required squat pattern etc, set with concrete and making good to floor, fixed as in repairs complete all as specified & directed.

Supply & fixing as in repairs wash hand basin, vitreous china, white, decorative type, flat or angle back, size 580mm x 450mm inclusive of waste pipe and brass coupling and including cutting for and pinning in ends of brackets or erecting stand and inclusive of cost of brackets complete all as specified and directed.

S&F as in repair Pillar taps long body fancy type with capasten head chromium plated screwed down high pressure with without lettered 'Hot' or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

Supply and fixing as in repair vitreous china squatting pan "Orissa" pattern size 580 x 440mm, white, with integral footrest (excluding flushing cistern) including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor, set with cement concrete, fixed as in repairs complete all as specified and directed.

S&F as in repairs Chromium plated shower roses 125 mm size fixed with swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed.

S&F as in repairs 100 mm dia mild steel chromium plated grating with or without waste pipe hole as per requirement complete all as specified and directed.

S&F in repair tubular towel Rail 20 mm dia of brass chromium plated complete all as specified and directed.

S&F in repair soap dish vitreous China white, approximate size 160x 160x90mm , any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified & directed

Supply and fixing as in repairs faucet health (hand jet) 15mm bore cast copper alloy, chromium plated with flexible chromium plated connection pipe, with fittings, complete all as specified and directed.

S&F as in repair vitreous china padastal pattern, "WC" incl connection to trap, and to flushing pipe anti-syphonage pipe, etc. complete, in repair complete all as specified and directed.

S&F as in repair plastic water closet seat cover, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engineer-in-Charge

Supply and fixing as in repairs CP wall Mixer (3-in-1) with arrangement for both telehonic hand shower and overhead shower with bend long swang nack and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed.

Supply and fixing as in repairs CP central hole Basin Mixer long swang nack, without poup waste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed.

S&F as in repairs CP wall mounted mixer 2-in-1 system for kitchen sink basin with swinging spout cast copper alloy with capstan head, CP screwed down high pressure with long screwed both ends for iron pipe or union including complete all as specified.

Supply & fixing as in repair vitreous china wash hand basin pedestal tye, white flat back, size 300mm x 450mm including pillar tap of chromium plated with capstan head with long screwed shanks and fly nuts, brass chromium plated waste coupling 32mm dia, with fly nuts, pvc waste pipe and MS brackets 25x25x5 mm thick incl cutting for and pining in ends of brackets, fixed as in repairs complete all as specified & directed.

Dismantling wrought iron or mild steel work of any description not other wise or as specified

S & F Framed work as in Steel Gate of angle or other section with gusset plate, rails, braces, stair case etc Fe 410-W (Gde-E-250) quality 'A' complete drilled for fixing of steel including welding etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings, locking arrangement, gate closer, stopper etc and hanging also fastening and fixing and building upto 8 mtr complete all as specified and as directed.

S&F1.00 mm Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bendingor turning up, mitred angles, etc. as required, , complete all as specified and as directed.

HINGLAZ ENTERPRISES (BID ID -3195756)

JAMUNA CONSTRUCTION AND GENERAL ORDER SUPPLIER (BID ID -3195965)

m/s gaurav enterprises (BID ID -3195550)

vikas builders (BID ID -3195891)

M/S BIKANER CHEMICAL LABORATORIES (BID ID -3194437)

JANGID CONSTRUCTION COMPANY (BID ID -3196352)