SR TO BATHROOM AND WASHING POINT BLDG NO P 40 OF 14 COSR ADDN ALTN TO BLDG NO TO 289 PROVN OF 01 X TOILET AT FIRE AND FURY SHOPPING COMPLEX AND SR OF INTERNAL ELECTRIFICATION AT VARIOUS BLDGS IN C MESS UNDER GE 865 EWS

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

M&L Glazed ceramic coloured tiles in vertical surfaces (350 X 250X7mm ) / (450x350x7mm) thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface over rendering 10mm thick in CM (1:4) , for dado/skirting tiles.complete all as specified and as directed by the Engr-in-charge.

M&L for Non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 and nexc .11 sqm in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match the 15mm thick screed bed with CM (1:6) laying floor tiles complete all as specified and directed by Engr-in-Charge.

Demolition of un reinforced cement concret as in ground floor of any description and in any position not other wise specifically provided for and Removing demolished material to a distance and depositing out site of MoD land Where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed by Engineer-in-Charge.

M&L for 25mm thick PCC 1:2:4, type B-1 using 20mm graded crushed stone aggregate as in sub base/ levelling course for laying of screed bed complete all as specified by Engr-in-Charge.

Dismantling of upto 100 mm dia cast iron drain pipes, salt glazed ware, AC or reinforced concrete including fitting, jointed in cement mortar complete all as specified and directed by Engr-in-Charge.

M&L for 110 mm bore, PVC (SWR) pipes, pressure rating 4 kg/sqcm, single or double socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by Engr-in- Charge. MAKE: SUPREME/ASHIRWAD/FINOLEX/ SFMC/ASTRAL

M&L for 75 mm bore, PVC (SWR) pipes, pressure rating 4 kg/sqcm, single or double socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by Engr-in- Charge. MAKE: SUPREME/ASHIRWAD/FINOLEX/ SFMC/ASTRAL

S&F PVC (SWR) bent 75 mm bore fixed to pipes of any description complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) bent 110 mm bore fixed to pipes of any description complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) (Tee single) 110 mm bore fixed to pipes of any description complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) (Tee single) 75 mm bore fixed to pipes of any description complete all as specified and directed by Engr-in-Charge.

M&L for PVC SWR floor trap 75mm with grating including jointing to waste pipe fixed in cement concrete type B1 in cement concrete (1:2:4), 20 mm graded stone aggregate complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) vent cowl 75 mm bore fixed to pipes of any description complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) 'S' trap 110 mm bore fixed to EWC/IWC of any description complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt), complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt), complete all as specified and directed by Engineer-in-Charge.

S&F 2nd class soft wood plain, solid, straight chowkets and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as directed by Engr-in-Charge.

S&F for 35mm thick 2nd class hard wood plain framed factory made paneled shutters (any number of panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, Supply and fixed to chowkatscomplete all as directed by Engr-in-charge.Make as per PS.

S&F for Aluminum, anodized, barrel tower bolts, ISI Marked, of extruded section 200 mm long, complete all as specified and directed by Engr-in-Charge.

S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed by Engr-in-Charge.

S&F 100mm mild steel medium weight , butt hinges of extruded section complete all as specified and as directed.

Hacking out old broken glass (any thick ness, size, quality or description) from wooden panes or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and as directed by Engr-in-Charge.

M&L for plain sheet glass 3mm thick ordinalry quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed by Engr-in-Charge.

M&L for pin head sheet glass 3mm thick ordinalry quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed by Engr-in-Charge.

Taking up or down 15 mm bore steel tubing and connections and set aside for re-use or removal to store complete all as specified and directed by Engr-in-Charge.

Taking up or down 25/32 mm bore steel tubing and connections and set aside for re-use or removal to store complete all as specified and directed by Engr-in-Charge.

S&F 20 mm bore 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified. Make : JINDAL/KISAN/SFMC/Supreme/Kanha Plastic Pvt Ltd

S&F 25 mm bore 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified. Make : JINDAL/KISAN/SFMC/Supreme/Kanha Plastic Pvt Ltd

S&F in repairs Vitreous China bowl Urinal, flat back, size of 465x355x265mm white with grating and union for discharge pipe and PTMT waste coupling with waste pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed by Engr-in-Charge.

S&F 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with twin flush provision, complete, all as specified and as directed by Engr-in-Charge. MAKE: Cera Model Combiflush twin flush as per Cat Part No. B1020101 (Old Cat Part No 2603) or equivalent in HINDWARE/PARRYWARE

S&Fin Vitreous china water closet, 'Orissa' pattern, including lime concrete bedding, size 580 x 440 mm white with integral foot rests excluding flushing cistern and flush pipe but including connection to trap, anti syphonage pipe etc. complete fixed in repairs, incl bedding with PCC 1:2:4 type B-1 using 20 mm grade stone aggregate complete all as specified and as directed by Engr-in-Charge. Make: Cera/Hindware/Parryware

S&F in repair Vitreous China wash down water closet pan and seat cover (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including P or S trap and including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device, including connection to drain pipe (or out going pipe) and to flushing pipe, antisyphonage pipe, etc. including cast iron 'P' or 'S' trap for 100mm bore of pipe, complete all as specified and as directed by Engr-in-Charge.

S&F PVC connections 15 mm size with PTMT nuts of length 600 mm, long complete all as specified and diected by Engr-in-Charge. Make: Prayag/Polytuf/Supreme

S&F 15mm bore, chromimum plated brass, Bib tap screwed for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge.MAKE: PARYAG/POLYTUF/SUPREME

S&F 20mm bore chromium plated, fancy type Stop valve/cock, cast copper alloy, screwed down, high pressure with handle, chromium plated, screwed end for iron pipe or for union and fixed, complete all as specified by Engr-in-Charge. MAKE: PARKO/MARC/ESS ESS/CERA

S&F in grating doom 125 mm dia of PTMT (minimum weight 60 gram) complete all as specified and directed by Engr-in-Charge.

S & F in repair towel rail 600mm long of aluminum 20 mm dia, D type fixed with and including chrominium plated brass screws and wooden/plastic cleatscomplete all as specified and directed by Engr-in-Charge.

S & F in repairs 1000 mm long, 32/ 40 mm dia., PVC flexible Waste pipe for sinks / wash hand basins and upto grating holes/traps complete all as specified and directed by Engr-in-Charge.

M&L for preperation of old or previously untreated wooden surface any description of any description over 10cm in width or girth and applaying one coat of synthetic enamal paint complete all as specified and as directed complete all as specified and as directed by Rngr-in-Charge.

M&L for preperation of new or previously untreated wooden surface any description of any description over 10cm in width or girth and applaying two coat of synthetic enamal paint over a coat of Pink primer complete all as specified and as directed complete all as specified and as directed by Rngr-in-Charge.

Demolition of precast concrete block/Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and directed by Engineer-in-Charge.

M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery exc 10cm in width with solid block masonery with solid blocks,exc.10cm in width and setting in cement mortar 1:6 all as Specified by Engr-in-Charge.

Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, including cutting of trees, shrubs or any type of vegitation upto and including roots complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15 mm thick rendering in cement mortar 1:4 on fair faces of brick walls or on concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.

M&L for preperation of new concrete /plastered surface of wall any description including chalk whitening and applaying two coat of distemper oil emulsion over a coat of primer complete all as specified and as directed complete all as specified and as directed by Engr-in-Charge.

M&L for 10mm thick teak wood finish laminated wooden flooring interlocked with each others and its size as directed,over 6 micron polyethylene sheeting over the concrete to minimize moisture migration from the concrete complete all as specified and directed by Engr-in-Charge. Make as per PS.

M&L for 9mm thick prelaminated particle board, medium interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to walls of any description or timper scantling with screws to timber frame work, complete all as specified and as directed by Engr-in-Charge. MAKE: NOVA PAN/GREEN PLY BHUTAN BOARD/MYSORE WOOD BOARD/CENTURY PLYWOOD

S&F 2nd class soft wood plain, solid, straight chowkets and frames, or scantling wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as directed by Engr-in-Charge.

M&L for 7-9 mm thick fine fissured teglar RH99 triangular and acoustic purpose of size 600x600x15 mm thick fixed with dash through fastner bolt of approved quality 04 Nos for per Sqm including necessary cutting securing and making good complete all as specified and directed by Engr-in-Charge. Make Armstrong or equivalant make in PS.

M&L for two coats cement base paint on newly plastered surfaces of wall including preparation of surfaces including curing before and after applying each coat complete all as specified and directed.

M&L for rendering 15 mm thick rendering in cement mortar 1:6 on fair faces of brick walls or on concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.

S&F 32 mm bore 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified. Make : JINDAL/KISAN/SFMC/Supreme/Kanha Plastic Pvt Ltd

S&F in PP-R 25mm bore Gate valve (with brass ferrule as per site reqirement antimicrobial fusion welded having thermal stability for hot & cold water supply . complete all as specified and directed by Engr-in-Charge. Make : JINDAL/KISAN/SFMC/Supreme/Kanha Plastic Pvt Ltd

S&F in grating doom 100 mm dia of CP (minimum weight 60 gram) complete all as specified and directed by Engr-in-Charge.

S&F Rotational moulded polyethylene water storage tank, inner and out white, two layers, ISI marked (cylinderical vertical with closed top) hoisted with threaded cap and fixed in position all as specified in SSR Part-I of Capacity 500 litres each including all accessories (i.e GI nipples, etc), including provn of 20/15mm dia spout for connecting inlet, outlet, overflow and washout pipes, including taking down of old broken water tank complete all as specified and as directed by Engr-in-Charge.

S&F 20 mm bore ball brass valve high pressure with polythene float and fly nuts complete screwed for iron pipe or brass ferrule complete all as specified and directed by Engr-in-Charge.

S&F 15 mm bore chromium plated, fancy type angle valve, cast copper alloy, screwed down, high pressure with handle, chromium plated, screwed end for iron pipe or for union and fixed, suitable for complete all as specified by Engr-in-Charge. MAKE: PARKO/MARC/ESS ESS/CERA

S&F sinks stainless steel with drainage board made of 1.0 mm thick kitchen or laboratory with plugs, washers and wastes; including fixing contilever brackets and connecting union to pipe overall size 915mm x 460 mmmm bowl size 410mm x 330mm x 160mm, complete all as specified. Make : NIRALI/NEELKANTH/JAYNA/SILVERSHINE/JINDAL

Excavating in trenches, n. exc 1.5 m wide and and not exc 1.50 m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, for laying cables/pipes, etc. n exc 10 sq m on plan in hard/dense soil and getting out soil, complete all as specified and as directed by Engineer-in-charge.

Returning filling in (soil) including spreading, levelling, watering and well ramming in layers n.exc 25cm thick in any type of soil complete all as specifed and as directed by Engineer-in-Charge.

Removal of excavated material (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specifed and as directed by Engineer-in-Charge.

M&L for Plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregates as in sub base, foundation, filling and mass concrete, complete all as specified and as directed by Engineer-in-Charge.

S&F MS work as in angles or Tees fixed independently cut to shape drilled including bending and welding angles of grade 410-Fe including dismantling of existing of any description complete all as specified and directed by Engr-in-Charge.

S&F Prepainted colored trapezoidal profiled/corrugated Galvalume/ Zinc coated steel sheet with min 0.50mm TCT confirming to IS-513 (AZ-150 GSM, AL Zn alloy mettalic coating 550 MPA yield stress as per AS-1397), as in roof covering/cladding to wall fixed with self tapping screws colour/exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron top coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer, all fixed with Galvanised self drilling/self-tapping fastener (12-14 x 55 with EPDM seals) indlucing dismantling palin or corrugated sheeting any gauge thickness including nanital or similar pattern complete all as specified and directed by Engr-in-Charge Make : Tata Blue Scope Steel Ltd/JSW Steel Ltd/CRIL

M&L for preperation and removal of new Steel / CGI Sheet surface any description over 10cm in width or girth and applaying two coat of synthetic enamal paint over a coat or red oxide zine complete all as specified and directed by Engr-in-Charge.

M&L for hard core of broken stone or boulders of gauge n.exc 63 mm deposited, spread and level in layers n. exc. 15 cm thick watered and rammed to true surface complete all as specified and directed by Engr-in-Charge.

M&L for 100 mm thick PCC 1:3:6 type B-1 using 20mm graded crushed stone aggregate as in base complete all as specified by Engr-in-Charge.

M&L for 25mm thick PCC 1:2:4, type B-1 using 20mm graded crushed stone aggregate as in sub base/ levelling course for laying of screed bed complete all as specified by Engr-in-Charge.

M&L for Non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11 and nexc .18 sqm in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match the 15mm thick screed bed with CM (1:4) laying floor tiles complete all as specified and directed by Engr-in-Charge.

M&L for 75mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection and finished concrete surface even and smooth without using extra cement including making proper joints as per specification at an interval of 3m and change of direction complete all as specified and as directed by Engr-in-Charge.

S&F in PP-R 32mm bore Gate valve (with brass ferrule as per site reqirement antimicrobial fusion welded having thermal stability for hot & cold water supply . complete all as specified and directed by Engr-in-Charge. Make : JINDAL/KISAN/SFMC/Supreme/Kanha Plastic Pvt Ltd

S&F brass chromimium plated showe rose 125 mm size with or without swivel joints, fixed to steel/PPR pipes complete all as specified and directed by Engr-in-Charge. Make as per PS.

S&F in Viterous china wash basin, white flat back size 580x 450mm including waste coupling CP 32mm dia and CI brackets of iron 65 x 65 x 6mm embedded in PCC block with PCC 1:2:4 type B-1 and PVC waste pipe 32mm dia & CP grating with holes fixed complete, all as specified and as directed by Engr-in-Charge. MAKE: CERA/HINDWARE/PARRYWARE

S & F in 40mm waste coupling brass chromimum plated T for sink and wash hand basin (Half or full threaded ) (Minimum Weight 45 grams) complete all as specified and directed by Engr-in-Charge.

S&F 15mm bore, piller tap chromimum plated fancy type high pressure with or without letter Hot or cold with long screwed shank and fly nuts screwed for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge. MAKE: PARYAG/POLYTUF /SUPREME

S&F 2nd class soft wood plain, solid, straight chowkets and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as directed by Engr-in-Charge.

S&F for 30mm thick Flush shutter solid core construction both side veneered, with block board core commertial type fixed to chowkhat frame complete all as directed by Engr-in-charge.Make as per PS.

S&F for 30mm thick 2nd class hard wood plain framed factory made glazed and skeletion shutter shutters , open rebated and prepared to receive glass , gauze etc (without sash bars) edges of framing plain , chamfered or rounded fitted with cut and mitred beds for securing glass etc size of members of shutters as specified in SSR part I, Section 8 , clause 8.24(a) supplied and fitted to chowkats , complete all as specified and directed by Engr-in-charge.Make as per PS.

Material & labour PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in hold fast , bed block and like complete all as specified and as directed by the Engr-in-Charge.

M&L for framed work such as grills, greatings etc with end of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors ladders framed balusters , walkways, railings, framed work of water tanks and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed by Engr-in-Charge.

S&F for 300mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and as directed by Engr-in-Charge.

S&F in repair PVC SWR Gully trap 125/110mm with grating including jointing to waste pipe fixed in cement concrete type B1 in cement concrete (1:2:4), 20 mm graded stone aggregate complete all as specified and directed by Engr-in-Charge.

S&F PVC SWR Nahani trap 75mm with grating including jointing to waste pipe fixed in cement concrete type B1 in cement concrete (1:2:4), 20 mm graded stone aggregate complete all as specified and directed by Engr-in-Charge.

M&L for 110 mm bore, PVC (SWR) pipes, pressure rating 4 kg/sqcm, single or double socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by Engr-in- Charge. MAKE: SUPREME/ASHIRWAD/FINOLEX/ SFMC/ASTRAL

Material and labour for Concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 for 110 mm bore pipes including complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) bent 110 mm bore fixed to pipes of any description complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR)Tee 110 mm bore fixed to pipes of any description complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) vent cowl 110 mm bore fixed to pipes of any description complete all as specified and directed by Engr-in-Charge.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, fixed in repairs complete all as specified and as directed by Engr-in-Charge.

Taking down carefully copper/Aluminum point wiring (Light, Fan, Socket or power) complete fitting such as switches, ceiling, regulator, sockets etc removing materials to be store for keeping in safe custody for taking credit and making good disturbed surfaces of walls, floors etc complete all as speciifed and directed by Engr-in-Charge

M&L for point wiring for one light point or fan point controlled by one light/exhaust fan controlled by one way switch with PVC insulated copper conductor stranded cable of size 1.5 sqmm and including PVC casing/caping terminated in existing sunk CI/pressed steel terminal boxes for fixing and 1.5 sqmm PVC insulated copper wire as earth wire connected to earth wire connected to earth folly and 3.0mm thick plastic laminated sheet cover all as specified and directed by Engr-in-Charge.

M&L for point wiring for one light point or fan point controlled by one bell point controlled by one bell push on independent board switch with PVC insulated copper conductor stranded cable of size 1.5 sqmm and including PVC casing/caping terminated in existing sunk CI/pressed steel terminal boxes for fixing and 1.5 sqmm PVC insulated copper wire as earth wire connected to earth wire connected to earth folly and 3.0mm thick plastic laminated sheet cover all as specified and directed by Engr-in-Charge.

All as per item No 93.00 here-in-before but 1.5 Sqmm for one 3 pin 6 amps socket outlet including 1.5 sqmm insulated copper wire as earth wire to the same earth dolly on the independent board complete all as specified and directed by Engr-in-Charge.

All as per item No 93.00 here-in-before but 1.5 Sqmm for one 3 pin 6 amps socket outlet including 1.5 sqmm insulated copper wire as earth wire to the same earth dolly on the same board complete all as specified and directed by Engr-in-Charge.

All as per item No. 93.00 above but using cable 2.5 Sqmm size complete all as specified and directed by Engr-in-Charge.

S&F in replacement for lamp holder PVC/Poly corbonate type insulated body with back plate suitable for batten fittings as specified and directed by Engr-in-Charge.

S&F in replacement for switch piano flush type one way single pole 5/6 Amp 240 volts complete all as specified and directed by Engr-inCharge.

S&Fin replacement for switch socket combination 2 in 1, 5 pin, 15 Amps flush type universal complete all as specified and directed by Engr-in-Charge.

S&Fin replacement for switch socket combination 2 in 1, 5 pin, 5/6 Amps flush type universal complete all as specified and directed by Engr-in-Charge.

S&F in replacement for ceiling rose surface bakelite 65x50 mm two to three terminals complete all as specified and directed by Engr-in-charge.

S&F in replacement of bell push single pole 230 volt complete all as specified and directed by Engr-in-Charge.

S&F in replacement of bell ding dong single pole complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement for MCB distribution board Double door, regal grey, sheet metal enclosure, SPN 240 volts 12 way with 200 amps rated bus bar concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc . Make: Cat part No 5076 11 of Legrand (Ekinoxe) or equal approved in Schneider (Acti-9)/Siemens (Betagard-8GB32) or equivalant make in PS.

Supply and fixing in replacement for MCB SPN 40 to 63 Amps, 'C' series, 240 V A/C complete all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4085 96 of Legrand (DX³) or equal approved in Schneider (Acti-9)/ Siemens (Betagard-5SL4)

Supply and fix in replacement of sheet metal enclosure for VTPN DDs double door IP 43 when MCCBs to be used single pole and neutral 415 volt 8 ways complete all as specified and directed by Engr-in-Charge.

S&F in replacement of microprocessor based relese MCCB four pole 160 Amps, 415 Volts, AC ISI marked complete all as psecified and directed by Engr-in-Charge.

S&F in replacement of Thermal magnetic MCCB four pole 63 Amps, 415 Volts, AC, ISI marked complete all as specified and directed by Engr-in-Charge.

Supply & laying or fixing and testing of LT under ground cable, 1100 volts grade duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape overall PVC sheathed solid conductor in service connections 10 Sqmm four core flat/circular cable laid in trenches/poles/loop including brass terminal lugs etc complete all as specified and directed by Engr-in-Charge. Make as per PS.

Material and labour for earthing complete with galvanised steel earth plate 600 x 600 x 6 mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below ground level connected to and including GI wire of size 4 mm dia by means of nuts, bolts, washers etc made of and connected to test point and earth dolly as all shown in electrical plate No.3 of SSR Part-I 2009 and specified or indicated including excavation and earth work in any type of soil PCC (1:3:6) type C1 in chamber, pre cast RCC slab 50mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM jali (weight not less than 4.0 kg/Sqm) with cast iron frame, funnel, with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 15mm bore light grade GI protection pipe, test point, etc, incluidng taking down of old u/s earthing set complete all as specified and as directed. Note: (i) Item includes the cost of 7.5 m GI pipe for protection of earth lead. Any additional length shall be adjusted through deviation order. (ii) Item includes the cost of 7.5 m GI earth lead. Any additional in length shall be adjusted through deviation order ( For Main DBs ) (iii) Item includes the cost of Charcoal and commercial salt ( For Main DBs )

Sub main wiring with two run of 6.00 Sqmm (2x6 sqmm) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC casing caping ISI marked with all accessories etc with one run of 6.00 Sqmm (1x6sqmm) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire and making good to match with existing surfaces including taking down of old sub main wirings complete all as specified and directed by Engineer-in-Charge. Note:- 2 runs of 6 Sqmm (2x6sqmm), one run of 6 Sqmm (1x6 sqmm) cable and one metre of PVC casing caping will be measured as one unit. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB

S&F in replacement for LED lights fitting, TITANIA SLEEK NEW T5 LED TUBELIGHT (DOUBLE SIDE CONNECTION) (Double side Connection), 1x20 watt, 220 volts, AC ultra bright LED tube light with aluminium heat sink & polycarbonate diffuser having high efficacy suited for installation in existing T5 fitting with G5 lamp holders, led driver outside decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make as per PS.

S&F LED post top made in cast aluminium spigot housing with decorative opal polycarbonate diffuser and IP 65 protection of capacity 70 watt LED white colour including suitable size of GI pipe for fixing of light on post and electrical connection complete all as specified and directed by Engr-in-Charge MAke Bajaj product code BGCL 111539 70 W LED WH white colour CELESTA type or equivalant make in PS.

S&F GI tubing 50mm dia "light grade" with all fittings like elbow, bent, reducer, sockets, Tee etc laid in trenches, fixed on pole/under road crossing or passing through gutters etc incl taking down old one and making good of distrubed portion to match with adjacent surface complete all as directed by Engr-in-Charge.

Sub main wiring with two run of 2.5 Sqmm (2x2.5 sqmm) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC casing caping ISI marked with all accessories etc with one run of 2.50 Sqmm (1x2.50Sqmm) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire and making good to match with existing surfaces including taking down of old sub main wirings complete all as specified and directed by Engineer-in-Charge. Note:- 2 runs of 2.5 Sqmm (2x2.5sqmm), one run of 2.5 Sqmm (1x2.5 sqmm) cable and one metre of PVC casing caping will be measured as one unit. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB

S&F in switch socket combination 2 in 1, 5 pin, 5 Amps compination on the independent board universal complete all as specified and directed by Engr-in-Charge.

S&F in switch socket combination 2 in 1, 5 pin, 15 Amps compination on the independent board universal complete all as specified and directed by Engr-in-Charge.

S&F decorative ultra slim round profile LED lighting fixtures with extruded polycarbonate, environmental frendly energy efficient ready to use pack 18/20 Watt LED 6000K with connections 3 core copper wire from ceiling rose to fitting with complete accessories complete all as specified and directed by Engr-in-Charge. Make : HAvells/Bajjaj/CG or equivalant make in PS.

S&F in replacement of LED bulb, 9 watt, 230 volt, 50 Hz, AC complete al las specified and directed by Engr-in-Charge.

Supply and fixing of exhaust fan, PVC body, AC single phase 230 volts of size 300 mm sweep with blades and frame and louvers complete all as specified and as directed by Engr-in-Charge.

Supply and fixing for MCB SPN 16 to 32 Amps, 'C' series, 240 V, 10 KA, A/C complete all as specified and as directed by Engineer-in-Charge.Make as per PS.

Supply and fixing for MCB SP 5 to 32 Amps, 'C' series, 240 V, 10 KA, A/C complete all as specified and as directed by Engineer-in-Charge.Make: Make as per PS

Supply and fixing in replacement for MCB distribution board Double door, regal grey, sheet metal enclosure, SPN 240 volts 8 way with 200 amps rated bus bar concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc . Make: Cat part No 5076 of Legrand (Ekinoxe) or equivalant make as per PS.

Supply and fixing in replacement for MCB distribution board Double door, regal grey, sheet metal enclosure, SPN 240 volts 4 way with 200 amps rated bus bar concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc . Make: Cat part No 5076 of Legrand (Ekinoxe) or equivalant make as per PS.

S&F and testing of fancy type water heater storage type 25 Ltrs of capacity 5 star rating in all respect with 16 mm dia fastner including nut and bolt fixed to wall grouting in PCC 1:2:4 type B-2 inlet and outlet and connection NRV and steel tubing 15 mm bore complete all as specified and directed by Engr-in-Charge.

Cutting and alteration of existing 15 mm bore pipes fixed in any position for making branch connection complete all as specified and directed by Engr-inCharge.

S&F GI tubing 15mm dia medium grade" with all fittings like elbow, bent, reducer, sockets, Tee etc laid in trenches/ fixed to walls/fixed to floor etc complete all as specified and directed by Engr-in-Charge.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete awith one single pole MCB 20 Amps, complete all as specified and directed by Engr-in-Charge. Make as per PS.

All as per item No 93.00 here-in-before but 1.5 Sqmm for one 3 pin 15 Amps socket outlet including 1.5 sqmm insulated copper wire as earth wire to the same earth dolly on the independent board complete all as specified and directed by Engr-in-Charge.

S&F switch socket outlet 5 and 15 Amps 230 Volt complete all as specified and directed by Engr-in-Charge.

S&F in switch piano flush button one way single pole 5/6 Amp 240 volts complete all as specified and directed by Engr-inCharge.

S&F in ceiling rose surface bakelite 65x50 mm two to three terminals complete all as specified and directed by Engr-in-charge.

S&F in lamp holder PVC/Poly corbonate type insulated body with back plate suitable for batten fittings as specified and directed by Engr-in-Charge.

S&F in LED lamp,10 watt, 230 volts, 50 Hz, AC complete all as specified and directed by Engr-in-Charge.

Supply and fixing for MCB SPN 32 Amps, 'C' series, 240 V A/C complete all as specified and as directed by Engineer-in-Charge.Make as per PS.

S&F in switch socket combination flush type 3/5 pin 5/6 Amps complete all as specified and directed by Engr-in-Charge.

S&F in switch socket combination flush type 5 pin 15 Amps complete all as specified and directed by Engr-in-Charge.

Supply and fixing in MCB distribution board Double door, regal grey, sheet metal enclosure, SPN 240 volts 8 way with 200 amps rated bus bar concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc . Make: Cat part No 5076 of Legrand (Ekinoxe) or equivalant make as per PS.

Supply and fixing in MCB distribution board Double door, regal grey, sheet metal enclosure, SPN 240 volts 4 way with 200 amps rated bus bar concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc . Make: Cat part No 5076 of Legrand (Ekinoxe) or equivalant make as per PS.

Supply and fixing for MCB double pole 32 Amps, 'C' series, 240 V A/C complete all as specified and as directed by Engineer-in-Charge.Make as per PS.

Supply and fixing for MCB single pole 6 to 32 Amps, 'C' series, 240 V A/C complete all as specified and as directed by Engineer-in-Charge.Make as per PS.

Supply and fixing of exhaust fan, PVC body, AC single phase 230 volts of size 150 mm sweep with blades and frame and louvers complete all as specified and as directed by Engr-in-Charge.

S&F 1100 V grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of pvc tape and over all pvc sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4 mm suspension wire one twin core cable flat of stranded multistrand conductor size 16 sqmm complete all as specified and directed by Engr-in-Charge

All as per item No. 93.00 above but using cable 2.5 Sqmm size for socket outlet 15 Amps 3/5 pin on independent board complete all as specified and directed by Engr-in-Charge.

Rampal Singh Contractor