Construction of the new De-Nobili School Building (Phase-I works) for the Integrated township 2X800 MW units at DVC Chandrapura, Jharkhand

S. DSR AMOUNT DSR AMOUNT NON-DSR TOTAL AMOUNT

ABSTRACT OF COST CIVIL WORK

Sr No Sub Head DSR Amount Non DSR Amount Total Amount

Sr No Sub Head DSR Amount Non DSR Amount Total Amount

3 Reinforced Cement Concrete 123725272.11 0.00 123725272.11

11 Dismantling & Demolishing Work 361147.5 0.0 361147.48

Digitally signed by DIWAKAR

14 Structural Glazing Work 4683299.56 0.00 4683299.56

15 Miscellaneous Work 0.00 2997287.97 2997287.97

Digitally signed by DIWAKAR

PROPOSED CONSTRUCTION OF RESIDENTIAL & NON RESIDENTIAL BUILDINGS FOR CTPS TOWNSHIP AT CHANDRAPURA, JHARKHAND.

ESTIMATE - DE-NOBILI SCHOOL BUILDING

2023 with Non DSR

Sl.No. DSR 2023 Description Unit Quantity DSR Amount

I 2.0 EARTH WORK

Carriage of materials by Mechanical Transport including loading, unloading and stacking

of Earth up to 5 km

Earth work in excavation by mechanical means {Hydraulic excavator)/ manual means

over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan)

including getting out and disposal of excavated earth lead upto 50 m and for all lift, as

directed by Engineer-in-charge.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations

3 2.25 etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by cum 3247.77 209.78 681313.13

ramming and watering, lead up to 50 m and lift up to 1.5 m.

Supplying and filling in plinth with sand under floors, including watering, ramming,

consolidating and dressing complete.

Surface dressing of the ground including removing vegetation and inequalities not

exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.

Supplying chemical emulsion in sealed containers including delivery as specified..

6.1 2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% litre 951.30 251.25 239016.91

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite

treatment (excluding the cost of chemical emulsion) :

Treatment of soil under existing floors using chemical emulsion @one litre per hole, 300

7.1 2.35.3 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1

cement: 2 Coarse sand) to match the existing floor:

7.1.1 2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration sqm 4756.50 331.85 1578427.95

TOTAL EARTH WORK AMOUNT 4725741.56

II 4.0 CONCRETE WORK

Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level :

1:2:4 (1 cement : 2 coarse sand) derived from natural sources : 4 raded stone aggregate

20 mm nominal size derived from natural sources)

Digitally signed by DIWAKAR

1:3:6 (1 Cement : 3 coarse sand (zone-Ill) derived from natural sources :6 graded stone

aggregate 40 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form work for :

9.1 4.3.1 Foundations, footings, bases for columns sqm 134.15 419.72 56305.11

Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1

10 4.11 cement: 2 coarse sand (zone-Ill) derived from natural sources: 4 graded stone aggregate sqm 364.86 530.60 193593.17

20 mm nominal size derived from natural sources).

Extra for providing and mixing water proofing material in cement concrete work in doses per

by weight of cement as per manufacturer's specification. bag of

Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved

quality using 1.7 kg per square metre on damp proof course after cleaning the surface

with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand

(zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size

13 4.17 derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal sqm 324.95 801.98 260602.03

size, well rammed and consolidated and grouted with fine sand, including necessary

excavation, levelling & dressing & finishing the top smooth.

TOTAL CONCRETE WORK AMOUNT 3942091.45

III 5.0 REINFORCED CEMENT CONCRETE

14 5.9 Centering and shuttering including strutting, propping etc. and removal of form for

14.1 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete sqm 824.02 419.72 345854.80

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses

14.3 5.9.3 Suspended floors, roofs, landings, balconies and access platform sqm 7293.91 992.44 7238732.28

14.4 5.9.4 Shelves (Cast in situ) sqm 38.04 992.44 37753.05

14.5 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers sqm 10117.76 788.17 7974504.23

14.6 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts sqm 4761.33 1028.88 4898837.39

14.7 5.9.7 Stairs, (excluding landings) except spiral-staircases sqm 184.48 818.73 151034.97

Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string

courses, bands, copings, bed plates, anchor blocks and the like

14.9 5.9.16 Edges of slabs and breaks in floors and walls

14.10 5.9.19 Weather shade, Chajjas, corbels etc., including edges sqm 335.01 1017.96 341027.56

Extra for additional height in centering, shuttering where ever required with adequate

bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a

height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be

15.1 5.11.1 Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) sqm 411.32

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in

position and binding all complete upto plinth level.

Digitally signed by DIWAKAR

16.1 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 175216.59 115.43 20225575.87

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in

position and binding all complete above plinth level.

17.1 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 337262.39 115.43 38930823.77

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.

Providing and laying in position ready mixed or site batched design mix cement concrete

for reinforced cement concrete work; using coarse aggregate and fine aggregate derived

from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement,

admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of

concrete, to improve durability and workability without impairing strength; including

pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost

of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-

19 5.33 charge; for the following grades of concrete.

Note: Extra cement up to 10% of the minimum specified cement content in design

mix shall be payable separately. In case the cement content in design mix is more

than 110% of the specified minimum cement content, the contractor shall have

discretion to either re-design the mix or bear the cost of extra cement.

19.1 5.33.1 All works upto plinth level

a 5.33.1.1 Concrete of M25 grade with minimum cement content of 330 kg /cum cum 1401.73 10172.93 14259734.24

19.2 5.33.2 All works above plinth level upto floor V level

a 5.33.2.1 Concrete of M25 grade with minimum cement content of 330 kg /cum cum 2698.10 10553.59 28474621.77

Floor Joint 100mm Providing & Fixing of Expansion Joint system related with the Floor to

Floor/ Floor to Wall Expansion Joint Cover for 100 mm Expansion Joints Aluminium

Covers Profiles, having a Hard Wearing, Maintenance Free, long Lasting design. The

surface of the Exp. Joint Covers should have Serrated Surface for Skid Resistance and

should be ADA Compliant. The exposed surface should not exceed 113mm.The design of

the Exp. Joint Cover System should be such that it should avoid any accumulation of dirt.

20 5.44 The Exp. Joint Cover should have an Articulated Telescope Design so as to

accommodate the movements in 3 directions. The system should be in alloy 6063 T66 in

Mill finish and the total exposed surface of the profile should not be more than 113 & the

installation Height can be of 35 mm. The system can be used for standard Rolling loads

of private Cars or Cart wheel loads. The system should have ASTM1399 E certification.

The extrusion should be as ASTM 6063 T66 standards. The System shall be such that it

will be flushed with the finish The System should be ASTM-E 1399. Provision of Moiser

Barrier in the Joint System to have watertight joint is mandatory requirement all as per the

manufactures design and as approved by the Engineer-in-Charge.

20.1 5.44.1 Floor Joint of 100 mm gap metre 17.10 6841.95 116997.28

Digitally signed by DIWAKAR

Providing & Fixing of Expansion Joint system related with the WALL to WALL (Internal /

External) Location as per drawing and direction of engineer –In- Charge. Expansion Joint

The design of the Joint Cover System should be such that the system should snap onto a

50mm wide, hook shaped aluminum clip. The system should have gasket seals on the

21 5.45 edges to provide scratch protection to the wall finish and prevent accumulation of dust.

The system should be in 6063 alloy in clear anodized matt finish. Provision of Moisture

Barrier Membrane in the Joint System to have watertight joint is mandatory requirement

for all external area as per the manufactures design and as approved by the Engineer-in-

Providing and fixing of expansion joint system of approved make and Manufactures for

various roof locations as per approved drawings and Direction of Engineer-In-Charge.

The joints shall be of extruded aluminium base members with, self aligning and self

centring arrangement support plates as per ASTM B221-02. The system shall be such

that it provides watertight roof to roof/roof to corner joint cover expansion control system

that is capable of accommodating multidirectional seismic movement without stress to its

components. System shall consist of metal profile that incorporates a universal

aluminium base member designed to Accommodate various project conditions and roof

treatments. The cover plate shall be designed of width and thickness required to satisfy

movement and loading requirements and secured to base members by utilizing

22 5.46 manufacturer’s pre-engineered self-centring arrangement that freely rotates / moves in all

directions. The Self centring arrangement shall exhibit circular sphere ends that lock and

slide inside the corresponding aluminium extrusion cavity to allow freedom of movement

and flexure in all directions including vertical displacement. The Joint System shall

resists damage or deterioration from the impact of falling ice, exposure to UV, airborne

contaminants and occasional

foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the

Joint System to have water tight joint is mandatory requirement. (Material shall confirm to

22.1 5.46.1 Roof Joint of 100 mm gap metre 8.56 6406.49 54839.59

TOTAL REINFORCED CEMENT CONCRETE AMOUNT 123725272.11

IV 6.0 MASONRY WORK

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

foundation and plinth in:

23.1 6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 19.86 7633.65 151592.78

Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry with 150 mm to

300 mm thick with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to

15:2185 (Part 3) in super structure above plinth level up to floor V level with RCC band at

sill level and lintel level with approved block laying polymer modified adhesive mortar all

complete as per direction of Engineer-in-Charge. (The payment of RCC band and

reinforcement shall be made for separately).

Digitally signed by DIWAKAR

Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry 100 mm/ 125

mm thick with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to 15:2185

25 6.38 (Part 3) in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cum 389.69 10912.19 4252330.73

cement :4 coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm

dia M.S. bars at every third course of masonry work.

TOTAL MASONRY WORK AMOUNT 24108745.42

V 8.0 CLADDING WORK

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and

prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and

similar locations of required size, approved shade, colour and texture laid over 20 mm

26 8.2 thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white

cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing,

moulding and polishing to edges to give high gloss finish etc. complete at all levels.

26.1 8.2.2 Granite stone slab colour black, Cherry/Ruby red

a 8.2.2.2 Area of slab over 0.50 sqm sqm 26.82 5497.38 147443.08

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including

27 8.3 machine polishing to edge to give high gloss finish etc. complete as per design approved

by Engineer-in-Charge.

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia

28 8.4 and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. metre 44.70 608.52 27201.41

Extra for providing opening of required size & shape for wash basin/ kitchen sink in

kitchen platform, vanity counter and similar location in marble/ Granite/ stone work,

including necessary holes for pillar taps etc. including moulding, rubbing and polishing of

cut edges etc. complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622

(thickness to be specified by the manufacturer), of approved make, in all colours, shades

except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in

30 8.31 skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement sqm 548.17 1357.09 743907.53

: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing

in white cement mixed with pigment of matching shade complete.

Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm thick

31 7.38 bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement

with an admixture of pigment to match the stone shade.

31.1 7.38.1 8 mm thick (mirror polished and machine cut edge)

33.1.1 7.38.1.1 Granite stone of any colour and shade sqm 24.40 3312.10 80815.16

TOTAL CLADDING WORK AMOUNT 1063617.91

VI 9.0 WOOD AND P. V. C. WORK

Digitally signed by DIWAKAR

Providing and fixing ISi marked flush door shutters conforming to IS : 2202 (Part I) non-

decorative type, core of block board construction with frame of 1st class hard wood and

well matched commercial 3 ply veneering with vertical grains or cross bands and face

veneers on both faces of shutters:

31.1 9.21.1 35 mm thick including ISi marked Stainless Steel butt hinges with necessary screws sqm 546.72 2560.85 1400069.71

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all

edges of flush door shutters (over all area of door shutter to be measured).

Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of

glass excluded) (overall area of door shutter to be measured):

33.1 9.24.1 Rectangular or square sqm 546.72 213.15 116533.50

Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel

screws etc. complete:

Providing and fixing aluminium extruded section body tubular type universal hydraulic

door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight

upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed

adjustment with necessary accessories and screws etc. complete.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less

37 9.97 than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with

necessary screws etc. complete :

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less

38 9.1 than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with

necessary screws etc. complete :

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic

39 9.101 coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required

colour and shade, with necessary screws etc. complete.

39.1 9.101.2 Twin rubber stopper each 339.00 77.44 26250.87

Providing and fixing ISI marked aluminium sliding door bolts anodised (anodic coating not

less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade

with necessary screws etc. complete.

Providing and fixing bright finished brass 100 mm mortice latch and lock, ISi marked, with

six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS :

1868) aluminium lever handles of approved quality with necessary screws etc. complete.

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss

/ matt/ suede finish with high density protective surface layer and reverse side of

adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of

approved quality.

Digitally signed by DIWAKAR

Providing and fixing bright /matt finished Stainless Steel handles of approved quality &

make with necessary screws etc all complete.

Providing and fixing panic bar/ latch (Double point) fitted with a single body, Trim Latch &

44 9.139 Lock on back side of the Panic Latch of reputed brand and manufacture to be approved each 36.00 8954.29 322354.45

by the Engineer- in- charge, all complete.

Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side &

35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet

(Zinc coating not less than 120 gm/sqm) suitable for mounting 120 minutes Fire Rated

Glazed Door Shutters. The frame shall be filled with mineral wool Insulation having

density minimum 96Kg/sqm. The frame will have a provision of G.I. anchor fastners 14

45 9.161 nos (5 each on vertical style & 4 on horizontal style of size M10 x 80) suitable for fixing in metre 124.20 2357.76 292834.27

the opening along with factory made template for SS ball bearing hinges of size 100x89x3

mm for fixing of fire rated glazed shutter. The frame shall be finished with an approved

fire resistant primer or powder coating of not less than 30 micron in desired shade as per

the directions of Engineer - in- Charge. (Cost of SS ball bearing hinges is excluded).

Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 minutes Fire

rating conforming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per

laboratory approved by Engineer-in-Charge, with suitable mounting on door frame,

consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of

110 mm x 60 mm made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/

sqm) duly filled mineral wool insulation having density minimum 96 kg/ cum and fixing

with necessary stainless steel ball bearing hinges of size 100x89x3 mm of approved

make, including applying a coat of approved fire resistant primer or powder coating not

less than 30 micron etc all complete as per direction of Engineer-in-Charge (panelling to

be paid for separately).

Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc.,

with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120

gm/sqm) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm

from the edges and 150 mm c/c , including applying a coat of approved fire resistant

primer/ powder coating of not less than 30 micron on G.I. beading, & special ceramic tape

of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016

and as per direction of Engineer-in-Charge with glass of required thickness having 120

minutes of fire resistance both integrity & radiation control (EW120) and minimum 20

47 9.164 minutes of insulation (El20). The manufacturer have to give test report/certification of fire sqm 61.97 46748.19 2896751.52

glass and the glass should have the stamp showing the value of E, EW & El. The glass

shall be tested in approved NABL accredited lab or by any other accreditation body which

operates in accordance with ISO/IEC 17011 and accredited labs as per ISO/IEC 17025

for testing and

calibration scopes shall be eligible. The maximum glazing size shall not be more than

1100x2200 mm (w x h) or 2.42 sqm.

Digitally signed by DIWAKAR

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid

door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC

polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers

(wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of

12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and

screwed with full body threaded star headed SS screws having minimum frame density of

750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum

compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to

44 26.86 spread of flame of Class A category with property of being termite/borer proof,

proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of

required dia and length complete as per direction of Engineer-In- Charge. (M.S hold

fast/lugs or SS dash fasteners shall be paid for separately).

Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e depth

and width of profile shall be acceptable. Variation in profile dimensions on plus side shall

be acceptable but no extra payment on this account shall be made.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid

plain flush door shutter of required size comprising of virgin polymer of K value 58-60

(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat

husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having

minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N

(Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and

45 26.87 resistance to spread of flame of Class A category with property of being termite/borer

proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of

required size with necessary full body threaded star headed counter sunk S.S screws, all

as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary

S.S screws shall be paid separately)

TOTAL WOOD AND P. V. C. WORK AMOUNT 8873105.18

VII 10.0 STEEL WORK

Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard

with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred,

46 10.15 welded and grinded finish, with profiles of required size, including fixing of necessary butt

hinges and screws and applying a priming coat of approved steel primer.

Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm

46.1 10.15.1 of C.C. 1:3:6 (1 Cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) kg 7206.55 208.92 1505610.87

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc.,

including cutting, hoisting, fixing in position and applyinga priming coat of approved steel

primer, including welding and bolted with special shaped washers etc. complete.

47.1 10.16.2 Hot finished seamless type tubes kg 41612.00 220.86 9190276.72

Digitally signed by DIWAKAR

Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener

of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head,

48 10.27 comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame ,

concrete/ masonry, etc. as per direction of Engineer-in-charge.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels,

plates etc., including welding, grinding, buffing, polishing and making curvature (wherever

required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c

fixing the railing with necessary accessories & stainless steel dash fasteners , stainless

steel bolts etc., of required size, on the top of the floor or the side of waist slab with

suitable arrangement as per approval of Engineer-incharge, (for payment purpose only

weight of stainless steel members shall be considered excluding fixing accessories such

as nuts, bolts, fasteners etc.).

TOTAL STEEL WORK AMOUNT 14030734.55

VIII 11.0 FLOORING WORK

52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm

thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20

mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1

50 11.4 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, sqm 127.11 1047.24 133119.07

hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's

specifications. This includes cost of cement slurry, but excluding the cost of nosing of

steps etc. complete.

Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement :3 coarse

sand), finished with a floating coat of neat cement.

Providing and laying matt finished vitrified tile of size 300x300x9.8 mm having with water

absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours

and shades in for outdoor floors such as footpath, court yard, multi modals location etc.,

laid on 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes &

patterns including grouting the joints with white cement mixed with matching pigments etc.

complete as per direction of Engineer-in-Charge.

53 11.24 Extra for pre finished nosing to treads of steps of marble/granite stone. metre 792.65 770.51 610743.94

Extra for marble/granite stone flooring in treads of steps and risers using single length

up to 2.00 metre.

Kata stone slab flooring over 20 mm (average) thick base laid over and jointed with grey

cement slurry mixed with pigment to match the shade of the slab, including rubbing and

polishing complete with base of cement mortar 1 :4 (1 cement: 4 coarse sand):

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm

(average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey

cement slurry mixed with pigment to match the shade of the slabs, including rubbing and

polishing complete.

Digitally signed by DIWAKAR

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be

specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make

in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement

mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm

including pointing the joints with white cement and matching pigment etc., complete.

Providing and laying double charge vitrified floor tiles in different sizes (thickness to be

specified by the manufacturer) with water absorption less than 0.08% and conforming to

IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement

mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm

including grouting the joints with white cement and matching pigments etc., complete.

58.1 11.41A.1 Double charge vitrified tile polished finish of size

58.2 11.41A.3 Glazed Vitrified tiles Matt/Antiskid finish of size

Providing and laying double charge vitrified tiles in different sizes (thickness to be

specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S.

15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm

thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry

@ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc.

Providing and laying Polished Granite stone flooring in required design and patterns, in

linear as well as curvilinear portions of the building all complete as per the architectural

drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar

60 11.56 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white

cement slurry admixed with pigment of matching shade including rubbing, curing and

polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

60.1 11.56.1 Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent sqm 3481.81 4796.34 16699922.29

TOTAL FLOORING WORK AMOUNT 12600.27 31690419.13

IX 12.0 ROOFING WORK

Providing corrugated G.S. sheet roofing including vertical I curved surface fixed with

polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet

washers or with G.I. limpet washers filled with white lead, including a coat of approved

61 12.1 steel primer and two coats of approved paint on overlapping of sheets complete (up to

any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters

and trusses and including cutting to size and shape wherever required.

61.1 12.1.1 1.00 mm thick with zinc coating not less than 275 gm/m2 sqm 974.45 1559.59 1519737.06

Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with

62 12.7 iron brackets 40x3 mm size, bolts, nuts and washers etc., including making necessary

connections with rain water pipes complete.

62.1 12.7.1 0.80 mm thick with zinc coating not less than 275 gm/m2 metre 121.00 1102.03 133346.16

Digitally signed by DIWAKAR

Providing and fixing precoated galvanised steel sheet roofing accessories of total coated

thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating

63 12.51 thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa

steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-

18 microns using self drilling/ self tapping screws complete :

63.1 12.51.2 Flashings/ Aprons.( Upto 600 mm) metre 121.00 519.74 62888.26

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone

64 12.21 aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement

: 3 fine sand) as per standard design :

Providing and fixing false ceiling at all height including providing and fixing of frame work

made of special sections, power pressed from M.S. sheets and galvanized with zinc

coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle

cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm

centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm

long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50

mm of required length with nuts & bolts of required size and other end of angle hanger

fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm

centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with

tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall

be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips

made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing

65 12.45 perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long,

the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre,

with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to

ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm

at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square

edges of the board with recommended jointing compound , jointing tapes , finishing with

jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats

of primer suitable for board, all as per manufacturer's specification and also including the

cost of making openings for light fittings, grills, diffusers, cutouts made with frame of

perimeter channels suitably fixed, all complete as per drawings, specification and

direction of the Engineer in Charge but excluding the cost of painting with :

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011

(Board with BIS certification marks)

65.2 12.45.3 12.5 mm thick tapered edge gypsum moisture resistant board sqm 58.12 1636.60 95117.05

Digitally signed by DIWAKAR

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true

horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel

sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main 'T

runner with suitably spaced joints to get required length and of size 24x38 mm made from

0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross ·r of size

24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main

"T" at 600 mm center to center to fonn a grid of 1200x600 mm and secondary cross "T" of

length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be

interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall

66 12.52 angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid

including, required cutting/making, opening for services like diffusers, grills, light fittings,

fixtures, smoke detectors etc. Main " runners to be suspended from ceiling using GI

slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm

long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size

85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed

width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for

all heights as per specifications, drawings and as directed by Engineer-in-charge.

12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass

fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm

66.1 12.52.4 at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with sqm 507.60 1635.42 830138.12

non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79,

with 50 mm resin bonded glass wool backing.

Providing and Fixing 15mmthick densified tegular edged eco friendly light weight calcium

silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level,

suspended on inter locking metal grid of hot dipped galvanised steel sections

(galvanising@ 120 grams per sqm including both side) consisting of main 'T runner

suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm

thick (minimum) sheet, spaced 1200 mm centre to centre, and cross "T" of size 24x28

mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main'T' at

600 mm centre to centre to form a grid of 1200x600 mm and secondary cross 'T' of length

600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked

at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on

periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000

66 12.53 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre

to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick

densified edges calicum silicate ceiling tiles of approved texture in the grid, including,

cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke

detectors etc., wherever required. Main 'T' runners to be suspended from ceiling using

G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long

dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30

x 0.8 mm, spaced at 1200 mm centre to centre along main 'T. Bottom exposed with 24

mm of all T-sections shall be pre-painted with polyster baked paint, for all heights, as per

specifications, drawings and as directed by Engineer-in-Charge..

Digitally signed by DIWAKAR

Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No

deduction shall be made for exposed frames/opening (cut outs) having area less than

0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light sqm 232.48 2309.87 536987.38

eflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and

also having thermal conductivity <0.043 w/mK.

Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI

(solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on

waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the

67 12.55 ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & sqm 2709.91 1823.74 4942160.43

marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts

complete, including providing skirting upto 150 mm height along the parapet walls in the

TOTAL ROOFING WORK AMOUNT 6776010.21

X 13.0 FINISHING WORK

68 13.4 12 mm cement plaster of mix :

69 13.5 15 mm cement plaster on rough side of single or half brick wall of mix:

70 13.16 6 mm cement plaster of mix :

Extra for plastering exterior walls of height more than 10 m from ground level for every

additional height of 3 m or part thereof.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to

prepare the surface even and smooth complete.

Painting with synthetic enamel paint of approved brand and manufacture to give an even

73.1 13.62.1 Two or more coats on new work sqm 166.45 242.16 40306.28

74 13.46 Finishing walls with Acrylic Smooth exterior paint of required shade :

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of

exterior primer applied @ 0.90 litre/10 sqm)

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound )

75 13.82 content less than 50 grams/ litre, of approved brand and manufacture, including applying

additional coats wherever required, to achieve even shade and colour.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less

76 13.41 than 50 gram/litre, of approved manufacturer and of required shade and colour all

complete to achieve even shade and colour :

New work (two or more coats) over and including water thinnable priming coat with

cement primer having VOC content less than 50 gram/litre

TOTAL FINISHING WORK AMOUNT 25281000.26

XI 15.0 DISMANTLING AND DEMOLISHING WORK

Demolishing cement concrete manually/ by mechanical means including disposal of

material within 50 metres lead as per direction of Engineer - in - charge.

77.1 15.2.2 Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) cum 25.29 1609.30 40699.27

Digitally signed by DIWAKAR

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars

78 15.3 and disposal of unserviceable material within 50 metres lead as per direction of Engineer - cum 25.29 3800.90 96124.83

Demolishing brick work manually/ by mechanical means including stacking of serviceable

79 15.7 material and disposal of unserviceable material within 50 metres lead as per direction of

Engineer-in-charge.

Dismantling manually/ by mechanical means including stacking of serviceable material

80 15.4 and disposal of unserviceable material within 50 metres lead as per direction of Engineer-

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste

materials by mechanical means, including loading, transporting, unloading to approved

municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial

lead, for all leads including all lifts involved.

Carriage of materials by Mechanical Transport including loading, unloading and stacking

of Building Rubbish

TOTAL DISMANTLING AND DEMOLISHING WORK AMOUNT 361147.48

XII 21.0 ALUMINIUM WORK

Providing and fixing double action hydraulic floor spring of approved brand and

manufacture conforming to IS : 6315, having brand logo embossed on the body / plate

with double spring mechanism and door weight upto 125 kg, for doors, including cost of

83 21.4 cutting floors, embedding in floors as required and making good the same matching to

the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet

outer box with slide plate etc. complete as per the direction of Engineerin- charge.

83.1 21.4.1 With stainless steel cover plate minimum 1.25 mm thickness each 2.00 3022.37 6044.73

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved

brand and manufacture, including providing and fixing top & bottom pivot & double acting

84 21.18 hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing sqm 4.10 5700.31 23371.27

required door fittings, all complete as per direction of Engineer-in-charge (Door handle,

lock and stopper etc.to be paid separately).

Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/

wood/ Ceramic/ Gypsum work by providing weather/ structural non sag elastomeric PU

85 21.19 sealant over backer rod of approved quality as per architectural drawings and direction of

Engineer-in-charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600

85.1 21.19.1 Upto 5 mm depth and 5 mm width metre 3490.30 158.51 553252.44

TOTAL ALUMINIUM WORK AMOUNT 582668.45

XIII 22.0 WATER PROOFING WORK

Digitally signed by DIWAKAR

Providing and laying water proofing treatment to vertical and horizontal surfaces of

depressed portions of W.C., kitchen and the like consisting of:

(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing

compound conforming to IS : 2645 in recommended proportions including rounding off

junction of vertical and horizontal surface.

(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water

86 22.3 proofing compound in recommended proportion including rounding off junction of vertical sqm 198.23 823.70 163285.71

and horizontal surface.

(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of

(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should

be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).

Providing and spray applying two component hybrid polyuria polyurethane waterproofing

87 22.27 system at all levels for podium garden waterproofing by the manufacturer or his approved

applicator consistin of following operations -

(a) Brushing and vacuum cleaning the surface to make free from any loose material, oil,

grease, burr, dirt, dust etc.

(b) Repairing the surface if required, as per recommendation of manufacturer or his

approved applicator to make it water tight for which nothing extra shall be paid.

(c) Providing and applying by spray or brush, two component solvent free resin/ epoxy

primer mixed in proportion of volume / weight as recommended by manufacturer over

cement concrete surface in dry condition, having consumptionvaries from 0.20 to 0.40

kg/sqm depending on the porosity and undulations in the surface.

(d) Providing and sprinkling washed coarse sand, as recommended by manufacturer,

overfreshly laid primed tacky surface @ 0.25 to 0.40 kg/sqm as directed by Engineer-in-

(e) Over primed sandy surface, providing and spray applying two component hyrbrid

polyurea polyurathane coating system, which shall be solvent free, mixed in proportion by

volume / by weight as recommended by manufacturer having elongation > 400%, shore a

hardness > 75 (after 28 days), tensile strength of minimum of 10MPa as per DIN / ASTM

and tear strength minimum 30 N/mm as per DIN 53515 or minimum 45 N/mm as per

ASTM D624 and 20 maximum gel time / reaction time with minimum 1.5 mm dry film

thickness of two coats.

Digitally signed by DIWAKAR

(f) A layer of non woven polypropleyne geotextile of minimum mass / unit area of 120 gsm

with an overlap of 50 mm shall be laid over the polyurea/ polyurethane coatin surface,

having minimum tensile strength 2.40 KN/m as per ASTM D 4595.

(g) Providing and laying screed of cement concrete 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand

: 3 Graded stone aggregate 20 mm nominal size) of minimum thickness 50 mm at

khurrah with a slope of 1:100 towards khurra to ridge of roof (screed shall be paid for

(h) Providing and laying dimple drain boards with inbuilt geo textile drainage membrane

on top having dimple height of 20-25 mm, average number of dimples 400 per sqm,

compressive strength not less than 180 KN/sqm and geotextile member having mass of

120 gsm, laid with minimum overlap of 50 mm.

Note : If HDPE drain cells / Drainmats along with a layer of geotextile having weight of

120 gsm and tensile strength not less than 2.4 KN/m as per ASTM D 4595 is provided in

place of dimple drain board with inbuilt geotextile, it shall not be paid exttra.

22.27.1 New work on horizontal surfaces sqm 2709.91 2891.90 7836773.60

TOTAL WATER PROOFING WORK AMOUNT 8000059.31

XIV 25.0 STRUCTURAL GLAZING WORK

Providing and supplying aluminium extruded tubular and other aluminium sections as per

the architectural drawings and approved shop drawings , the aluminium quality as per

grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80

microns conforming to AAMA 2604 of required colour and shade as approved by the

Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws

etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be

paid on this account). The weight of aluminium extruded section shall be taken for

purpose of payment.

Designing, fabricating, testing, protection, installing and fixing in position semi (grid)

unitized system of structural glazing (with open joints) for linear as well as curvilinear

portions of the building for all heights and all levels, including:

(a) Structural analysis & design and preparation of shop drawings for the specified design

loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times

89 25.2 design wind pressure without any failure), including functional design of the aluminum

sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and

splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather

silicone sealants, flashings, fire stop (barrier)- cum-smoke seals, microwave cured EPDM

gaskets for water tightness, pressure equalisation & drainage and protection against fire

hazard including:

Digitally signed by DIWAKAR

(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005

T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional

movement for achieving perfect verticality and fixing structural glazing system rigidly to

the RCC/ masonry/structural steel framework of building structure using stainless steel

anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and

washers etc. of stainless steel grade 316, of the required capacity and in required

(c) Providing and filling, two part pump filled, structural silicone sealant and one part

weather silicone sealant compatible with the structural silicone sealant of required bite

size in a clean and controlled factory / work shop environment, including double sided

spacer tape, setting blocks and backer rod, all of approved grade, brand and

manufacture, as per the approved sealant design, within and all around the perimeter for

(d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of

sizes, shapes and profiles, as required as per the site conditions, to seal the gap between

the building structure and all its interfaces with curtain glazing to make it watertight.

(e) Making provision for drainage of moisture/ water that enters the curtain glazing system

to make it watertight, by incorporating principles of pressure equalization, providing

suitable gutter profiles at bottom (if required), making necessary holes of required sizes

and of required numbers etc. complete. This item includes cost of all inputs of designing,

labour for fabricating and installation of aluminium grid, installation of glazed units, T&P,

scaffolding and other incidental charges including wastages etc., enabling temporary

structures and services, cranes or cradles etc. as described above and as specified.

Digitally signed by DIWAKAR

The item includes the cost of getting all the structural and functional design including

shop drawings checked by a structural designer, dully approved by Engineer-in-charge.

The item also includes the cost of all mock ups at site, cost of all samples of the individual

components for testing in an approved laboratory, field tests on the assembled working

structural glazing as specified, cleaning and protection till the handing over of the building

for occupation. In the end, the Contractor shall provide a water tight structural glazing

having all the performance characteristics etc. all complete as required, as per the

Architectural drawings, as per item description, as specified, as per the approved shop

drawings and as directed by the Engineer- in-Charge.

Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded

aluminium section capping for fixing in the grooves of the curtain glazing and vermin

proof stainless steel wire mesh shall be paid for separately under relevant items under

this sub- head. However, for the purpose of payment, only the actual area of structural

glazing (including width of grooves) on the external face shall be measured in sqm. up to

two decimal places. Note:-2. The following performance test are to be conducted on

structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified

laboratories accreditated by NABL(National Accreditation Board for Testing and

Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is

payable separately. The NIT approving authority will decide the necessity of testing on

the basis of cost of the work, cost of the test and importance of the work. Performance

Testing of Structural glazing system Tests to be conducted in the NABL accredited lab or

any other accreditation body which operates in accordance with ISO/IEC 17011 and

accredits labs as per ISO/IEC 17025 1. Performance Laboratory Test for Air Leakage

Test (-50pa to - 300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing method for a

testing limit 1 to 200 mVhr

2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testing

method for a range up to 2000 ml.

3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method

for a range upto 2000 ml

4. Structural Performance Deflection and deformation by static air pressure test (1.5 times

design wind pressure without any failure) as per ASTME-330-10 testing method for a sqm 12.48 3757.29 46872.17

range upto 50 mm

5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for

Qualitative test, Tests to be conducted on site.

6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto

Digitally signed by DIWAKAR

Providing, assembling and supplying vision glass panels (IGUs) comprising of

hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size

and shape as required and specified, comprising of an outer heat strengthened float

glass 6 mm thick, of approved colour and shade with reflective soft coating on surface # 2

of approved colour and shade, an inner Heat strengthned clear float glass 6 mm thick,

spacer tube 12 mm wide, dessicants, including primary seal and secondary seal

(structural silicone sealant) etc. all complete for the required performances, as per the

Architectural drawings, as per the approved shop drawings, as specified and as directed

by the Engineerin- Charge. The IGUs shall be assembled in the factory/ workshop of the

glass processor.

TOTAL STRUCTURAL GLAZING WORK AMOUNT 4683299.56

XV MISCELLANEOUS WORK

Supply & Fixing 5 Knuckle, 2 bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in

91 MR-1 satin stainless steel. As per EN 1935, CE Marked. Suitable for door weights upto 120kgs. each 108.00 491.00 53028.00

as per direction of engineer-in-charge

Supply & Fixing rack and pinion door closer EN size 3-6, with standard arm and two

independent closing valves and latching speed adjustable by arm. All adjustment screws

face fixed with slide plate. For Door width upto 1400mm Silver finish. As per EN 1154 and

CE marked. as per direction of engineer-in-charge

Supply & Fixing Automatic door bottom RP8si seal from Raven,extruded silicon sealing

component, spring loaded to lift clear of the floor. Concealed mounted in a 15mm x 34mm

groove. Max gap 13mm. Finish: Anadoised satin clear. L=920mm as per direction of

engineer-in-charge

Supply & Fixing Surface mounted door coordinator for double doors SR 390, zinc plated

94 MR-4 for steel doors, non-Handed as per EN 1158 and CE marked. as per direction of engineer- each 36.00 14163.00 509868.00

Supply & Fixing Delta Seal for acoustic, fire and smoke protection, suitable for wooden

95 MR-5 and steel frames, self adhesive, Finish = Black, Length = 1 x 2000mm, Height- 2 x each 36.00 7180.00 258480.00

2750mm as per direction of engineer-in-charge

Providing and fixing G.I. chicken wire mesh having wire of thickness 22 SWG and

minimum aperture of 20mmx20mm of approved quality over the junction of R.C.C

96 MR-6 member and brick/AAC wall including fixing with U nails/screws 150 mm centre to centre Sqm 3278.57 238.00 780299.97

in both direction before plastering etc. all complete as per the direction of Engineer-in-

TOTAL MISCELLANEOUS WORK AMOUNT 2997287.97

Digitally signed by DIWAKAR

Name of Project : CONSTRUCTION OF INTEGRATED TOWNSHIP AT CHANDRAPURA, JHARKHAND

Name of Work : Plumbing Works

DE NOBILI SCHOOL

S. No. Description PLUMBING

DSR NSR Total

1 Internal Plumbing Works. 34,57,587.16 3,02,323.00 37,59,910.16

Grand Total 37.60 Lakh

Grand Total 37.60 Lakh

Digitally signed by DIWAKAR

Name of Project : CONSTRUCTION OF INTEGRATED TOWNSHIP AT CHANDRAPURA, JHARKHAND

Name of Work : Plumbing Works

DE NOBILI SCHOOL

Ref. DSR- DSR Rate

S. No. Description of Item Unit Qty

2023/MR DSR NSR

1.0 Internal Plumbing Works.

1 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as

per IS 13983 with C.I. brackets and stainless steel plug 40 mm

including painting of fittings and brackets, cutting and making

good the walls wherever required :

a 17.10.1.3 Kitchen sink with drain board 510x1040 mm bowl depth 200 mm

2 17.31 Providing and fixing mirror of superior glass (of approved quality)

complete with 6 mm thick hard board ground fixed to wooden

cleats with C.P. brass screws and washers complete.

3 17.28 Providing and fixing P.V.C. Waste pipe for sink or wash basin

including P.V.C. waste fittings complete.

a 17.28.1 Semi rigid pipe

4 DSR-17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved

quality & make and as per the direction of Engineer-in-charge.

5 DSR-17.34 Providing and fixing toilet paper holder :

Digitally signed by DIWAKAR

17.2 Providing and fixing white vitreous china pedestal type water

closet (European type W.C. pan) with seat and lid, 10 litre low

level white P.V.C. flushing cistern, including flush pipe, with

manually controlled device (handle lever), conforming to IS :

7231, with all fittings and fixtures complete, including cutting and

making good the walls and

floors wherever required :

6 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid Each 48.00 6973.59 334732.47 0.00

6a 17.1 Providing and fixing water closet squatting pan (Indian type W.C.

pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level

white P.V.C. flushing cistern, including flush pipe, with manually

controlled device (handle lever) conforming to IS : 7231, with all

fittings and fixtures complete, including cutting and making good

the walls and floors wherever required

17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440

mm with integral type foot rests Each 6.00 7243.14822 43458.89 0.00

7.00 ,18.49 Providing and fixing C.P. brass bib cock of approved quality

conforming to IS:8931 :

8.00 ,18.53 Providing and fixing C.P. brass angle valve for basin mixer and

geyser points of approved quality conforming to IS:8931

Digitally signed by DIWAKAR

9.00 17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P.

brass pillar taps, 32 mm C.P. brass waste of standard pattern,

including painting of fittings and brackets, cutting and making

good the walls wherever require:

17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of

15 mm C.P. brass pillar taps] Each 46.00 2835.06 130412.95 0.00

10.00 18.21 Providing and fixing uplasticised PVC connection pipe with brass

18.21.2 45 cm length

11.00 18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm

12.00 17.22B Providing and fixing CP Brass Single lever telephonic wall mixer of

quality & make as approved by Engineer in charge.

NS-12 Providing & Fixing CP Brass Shower Spout Each 3.00 2952.00 0.00 8,856.00

13.00 NS-2 Providing and fixing C.P. cast brass twin coat hooks fixed to PVC

rawl plug with SS screws. Each 59.00 1315.00 0.00 77,585.00

14.00 NS-3 Providing and fixing of ABS health spary which can tolerate water

pressure up to 6 bar flow pressure with metal hose and holder in

Polished Chrome. Each 59.00 1613.00 95,167.00

15.00 NS-4 Providing, fixing, testing and commissioning of CP brass swan

neck wall mounted sink mixer with wall flange and swinging

casted spout complete as required and making good the walls

wherever required. [Make :Euronics, Model:FLO-3012A or

equivalent/as per approved make list].

Digitally signed by DIWAKAR

16.00 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm

long, 200 mm wide with minimum distances of 37 mm from wall

face with concealed fittings arrangement of approved quality and

colour,weighing not less than 88 gms. Each 46.00 248.26 11419.78 -

17.00 18.65 Providing and fixing PTMT soap Dish Holder having length of

138mm,breadth 102mm, height of 75mm with concealed fitting

arrangements,weighing not less than 106 gms.

19.00 17.5 Providing and fixing white vitreous china flat back half stall urinal

of size 580x380x350 mm with white PVC automatic flushing

cistern, with fittings, standard size C.P. brass flush pipe, spreaders

with unions and clamps (all in C.P. brass) with waste fitting as per

IS : 2556, C.I. trap with outlet grating and other couplings in C.P.

brass, including painting of fittings and cutting and making good

the walls and floors wherever required :

17.5.1 Single half stall urinal with 5 litre P.V.C. automatic flushing cistern

20.00 17.73 Providing and fixing PTMT towel rail complete with brackets fixed

to wooden cleats with CP brass screws with concealed fittings

arrangement of approved quality and colour.

17.73.1 450mm long towel rail with total length of 495mm. 78mm wide

and effective height of 88mm, weighing not less than 170 gms

21.00 NS-5 Supply, installation, testing and commissioning of horizontal type

storage hot water heater within-built pressure relief valve, rated

for inlet water pressure upto 6 bar complet in all respects

including inlet, oulet connections, fixing bolts etc. and testing

Digitally signed by DIWAKAR

B Soil, Waste, Vent & Rain Water Pipes

21.00 12.22 Making khurras 45x45 cm with average minimum thickness of 5

cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded

stone aggregate of 20 mm nominal size) over P.V.C. sheet

1mx1mx400micron, finished with 12mm cement plaster 1:3 (1

cement : 3 coarse sand) and a coat of neat cement, rounding the

edges and making and finishing the outlet complete.

22.00 Providing and fixing to the inlet mouth of rain water pipe cast

DSR-12.44 iron grating 15 cm diameter and weighing not less than 440

23.00 17.35 Providing and fixing soil, waste, vent and rain water pipes

Hubless centrifugally cast iron pipes epoxy coated inside &

24.00 Providing and fixing MS holder bat clamps of approved design to

cast iron (spun) pipe embedded in and Including cement concrete

blocks 10 x10 x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4

17.37 graded stone aggregate 20mm nominal size) including cost of

cutting holes and making good the walls etc.

25.00 Providing and fixing bend of required degree with access door,

17.38 insertion rubber washer 3mm thick, bolts and nuts complete.

Hubless centrifugally cast iron epoxy coated inside & outside IS :

Digitally signed by DIWAKAR

26.00 17.39 Providing and fixing plain bend of required degree.

Hubless centrifugally cast iron epoxy coated inside & outside IS :

27.00 Providing and fixing double equal plain junction of required

Hubless centrifugally cast iron pipes epoxy coated inside &

28.00 Providing and fixing single equal plain junction of required degree

Hubless centrifugally cast iron epoxy coated inside & outside IS :

29.00 Providing and fixing single unequal plain junction of required

Hubless centrifugally cast iron epoxy coated inside & outside IS :

30.00 Providing and fixing Hubless cast iron offsets epoxy coated inside

& outside as per IS : 15905

17.54A.1 130 mm offsets

31.00 17.56 Providing and fixing terminal guard:

Hubless centrifugally cast iron epoxy coated inside & outside IS :

Digitally signed by DIWAKAR

32.00 Providing and fixing shielded coupling for Hubless centrifugally

17.57A.1.1 SS 304 grade coupling with EPDM rubber gasket Each 210.00 462.423115 97,108.85

33.00 Painting with synthetic enamel paint of approved drand and

manufacture to give an even shade

13.61.1 Two more coast on new work sqm 170.00 166.86 28366.16

34.00 4.1 Providing and laying in position cement concrete of specified

grade excluding the cost of centering and shuttering - All work up

to plinth level:

4.1.3 1:2:4 (1 cement :2 coarse sand: 4 hard stone aggregate 20mm

35.00 ,17.60 Providing and fixing trap of self cleansing design with screwed

down or hinged with or without vent arm complete, including

cost of cutting and making good the walls and floors.

a 17.60.1 100 mm inlet and 100 mm outlet

17.60.1.3 Hubless centrifugally cast (spun) iron epoxy coated inside &

outside as per IS:15905 Each 44.00 914.62 40243.49 0.00

b 17.60.2 100 mm inlet and 75 mm outlet

17.60.3 Hubless centrifugally cast (spun) iron epoxy coated inside &

outside as per IS:15905 Each 31.00 632.98 19622.24 0.00

36.00 NS-6 Circular type 125 mm nominal dia [Make :Euronics, Model:

EFG01P-55or equivalent/as per approved make list].

Digitally signed by DIWAKAR

Circular type 125 mm nominal dia [Make :Euronics, Model:

EFG01P-55 or equivalent/as per approved make list].

37.00 Fire DSR 27.8 Providing, laying, testing & commissioning of 'B' class heavy duty

G.I. pipe conforming to IS 1239 including welding, fittings like

elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing

the pipe on the wall/ceiling with suitable clamp/support frame

and painting with two or more coats of synthetic enamel paint of

required shade complete as required :

For WB, Urinal FT & FD and Sink Drain pipe

38.00 12.41 Providing & fixing on wall face unplasticised -Rigid PVC rain water

pipes conforming to IS:13592 Tyape A included jointing with seal

ring conforning to IS:5382 leaving 10 mm gap for thermal

expansion. (i)Single socketed pipes.

39.00 12.42 Providing, fixing on wall face unplasticised - PVC moulded fittings

/accessories for unplasticised - Rigid PVC rain water pipes

conforming to IS ; 13592 Type A including jointing with seal ring

conforming to IS ; 5382 leaving 10 mm gap for thermal

39.00 NS 7 Providing and fixing of 110x75 mm dia uPVC Balcony Drain

Digitally signed by DIWAKAR

C Internal Water Supply

41.00 18.70 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all

CPVC plain & brass threaded fittings i/c fixing the pipe with

clamps at 1.00 m spacing. This includes jointing of pipes & fittings

with one step CPVC solvent cement and testing of joints

complete as per direction of Engineer in Charge.

Internal Work - Exposed on Wall

a 18.7.3 25 mm nominal outer dia .Pipes. Metre 240.00 429.78 103146.95 0.00

a 18.7.4 32 mm nominal outer dia .Pipes. Metre 125.00 555.22 69402.27 0.00

b 18.7.5 40 mm nominal outer dia .Pipes. Metre 55.00 752.37 41380.21 0.00

18.7.6 50 mm nominal outer dia .Pipes. Metre 45.00 999.82 44991.93 0.00

42.00 ,18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all

CPVC plain & brass threaded fittings i/c fixing the pipe with

clamps at 1.00 m spacing. This includes jointing of pipes & fittings

with one step CPVC solvent cement and the cost of cutting chases

and making good the same including testing of joints complete as

per direction of Engineer in Charge.

Concealed work including cutting chases and making good the

a 18.8.2 20 mm nominal outer dia .Pipes. Metre 365.00 575.39 210018.55 0.00

b 18.8.3 25 mm nominal outer dia .Pipes. Metre 185.00 671.35 124198.95 0.00

43.00 ,18.10 Providing and fixing G.I. pipes with two coats of anti-corrosive

bitumastic paint of approved quality : complete with G.I. fittings

and clamps, i/c cutting and making good the walls etc.

Internal work - Exposed on Wall

Digitally signed by DIWAKAR

a 18.10.1 & 15 mm dia nominal bore

b 18.12.2 & 20 mm dia nominal bore

44.00 Fire DSR - 27.8 Providing, laying, testing & commissioning of 'B' class heavy duty

G.I. pipe conforming to IS 1239 including welding, fittings like

elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing

the pipe on the wall/ceiling with suitable clamp/support frame

and painting with two or more coats of synthetic enamel paint of

required shade complete as required :

c DSR Fire-27.8.1 25 mm dia nominal bore

d DSR Fire-27.8.2 32 mm dia nominal bore

e DSR Fire-27.8.3 40 mm dia nominal bore

f DSR Fire-27.8.4 50 mm dia nominal bore

g DSR Fire-27.8.5 65 mm dia nominal bore

h DSR Fire-27.8.6 80 mm dia nominal bore

DSR Fire-27.8.7 100 mm dia nominal bore

Digitally signed by DIWAKAR

45.00 DSR-18.32 Constructing masonry Chamber 30x30x50 cm inside, in brick work

in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock,

with C. I. surface box 100x100 x75 mm (inside) with hinged cover

fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand

: 4 graded stone aggregate 20 mm nominal size), i/c necessary

excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand :

10 graded stone aggregate 40 mm nominal size ) and inside

plastering with cement mortar 1:3 (1 cement : 3 coarse sand)

12mm thick, finished with a floating coat of neat cement

complete as per standard design :

a 18.32.1 With common burnt clay F.P.S.(non modular) bricks of class

46.00 DSR-18.48 Providing and placing on terrace (at all floor levels) polyethylene

water storage tank, IS : 12701 marked, with cover and suitable

locking arrangement and making necessary holes for inlet, outlet

and overflow pipes but without fittings and the base support for

47.00 DSR-18.77 Making core cutting machine up to 15x15 cm in R.C.C. floors and

roofs for passing drain pipe etc. and repairing the hole after

insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement

: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size),

including finishing complete so as to make it leak proof.

48.00 18.17 Providing and fixing gun metal gate valve with C.I. wheel of

approved quality (screwed end) :

Digitally signed by DIWAKAR

49.00 DSR Fire- Supplying, fixing, testing and commissioning of butterfly

27.11.5 valve of PN 1.6 rating with bronze/gunmetal seat duly ISI

marked complete with nuts, bolts, washers, gaskets

conforming to IS 13095 of following sizes as required :

50.00 18.19 Providing and fixing gun metal non- return valve of approved

quality (screwed end) :

51.00 Providing and fixing forged brass ball valve of brass body with

hard chrome plated steel ball inside PTFE (Teflon) seat & ring with

chrome plated centre handle with female BSP threads complete

in all respects.

a NS-8 15 mm nominal bore Each 34.00 368.00 0.00 12512.00

b NS-9 20 mm nominal bore Each 66.00 513.00 0.00 33858.00

52.00 NS 10 Providing and fixing forged brass single acting air release valve

with screwed inlet 25 mm dia. Each 12.00 656.00 0.00 7872.00

53.00 Providing and fixing ball valve (brass) of approved quality, High or

18.18 low pressure, with plastic floats complete :.

Digitally signed by DIWAKAR

Solar Water Heaters

54.00 Supply, erection, testing & commissioning of solar water

NS-11 heating system with following details :

System temperature output : 60 degree C (during clear sunny

System type : Thermo syphon

System : Non Pressurised

Application : Bathing / Washing / Cooking

Type of Solar Collectors : Copper tube Flat Plate Collectors as per

BIS with following specifications -

Size of Collector : 2080 x 1070 x 100 mm

Number of Collector : To suit system requirement.

Absorber area : 2 sq M

Weight : 46 Kg (Dry)

Absorber Coating : Selective - NALSUN

Absorbivity : > 0.95

Emissivity : < 0.2

Frame Material : 16 SWG extruded Aluminium

Glazing : Toughened Glass

Glass beeding : EPDM

Finish : Painted by approved shade

Hot water return pump

Hardware : SS 304

Insulation : PUF

Collector Stand : 35x35x3 mm MS angle

Hot Water Tank : Cylindrical - vertical / horizontal, Stainless steel

304 grade with 100 mm thick Rock Wool insulation including 22

SWG aluminium cladding.

Digitally signed by DIWAKAR

The entire system should be complete with internal piping in

SS(304) with 50 mm rock wool insulation of density 48 kg/m3

with 26 SWG Al cladding, necessary isolation valves, Y type CI

strainer, hardwares, temperature gauge of range 0 - 120oC, water

meter, MS angle iron structure of min thickness 3 mm duly

painted etc as required to complete the system in all respects.

The entire system should be approved by BIS as per IS : 12933

and as per local regulations.

System Capacity : 1500 liters ( storage tank of 2,000 litres ) per

day (LPD) having 15 collectors. Item 0.00 702339.00 - 0.00

Total C/F to Summary 34,57,587.16 3,02,323.00

Digitally signed by DIWAKAR

Summary of Cost

Project - Proposed Construction of Integrated Township at Chandrapura, Jharkhand.

Name of Block - DE Nobili School.

DSR-2025 Market Based

S.No. Description Total Amount

S.No. Description Total Amount

1 Cost of Internal Electrification & UPS Work 1,99,30,328.95 61,07,165.76 2,60,37,494.71

2 Cost of Fire Detection & Alarm Work 2,81,769.00 - 2,81,769.00

3 Cost of CCTV Surveillance Work 3,62,880.00 - 3,62,880.00

6 Cost of AV System Work 10,50,659.85 -

7 Cost of On-Grid Solar Power Backup System Work (50KWp) 27,14,000.00

Digitally signed by DIWAKAR

Detailed Estimate Based On DSR-2022 With Cost Index & Market Rate

Project - Proposed Construction of Integrated Township at Chandrapura, Jharkhand.

Name Of Work -DE Nobili School Internal Electrification Work

Rate as per D.S.R. 2025 (For

without GST DSR rates = MARKET BASED

Sr.N Rate as per

Particulars Sch.No. Qty Unit Amount Rate Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell

point with 1.5 sq.mm FRLS PVC insulated copper conductor

single core cable in surface / recessed medium class PVC

1 conduit, with modular switch, modular plate, suitable GI box 1.10.3 1,212.00 Nos. 1,704.00 20,65,248.00 -

and earthing the point with 1.5 sq.mm FRLS PVC insulated

copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC

insulated copper conductor single core cable in surface/

2 recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC 1.12 10,550.00 Meter 373 39,35,150.00 -

insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the

following sizes of FRLS PVC insulated copper conductor, single core cable

in surface/ recessed medium class PVC conduit as required.

Supplying and drawing following pair 0.5 mm dia FRLS PVC

insulated annealed copper conductor, unarmored telephone

cable in the existing surface/ recessed steel/ PVC conduit as

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper

conductor PE insulated, shielded with fine tinned copper braid and

protected with PVC sheath in the existing surface/ recessed steel/ PVC

conduit as required.

Supplying and fixing of following sizes of medium class PVC

conduit along with accessories in surface/recess including

cutting the wall and making good the same in case of recessed

conduit as required.

Digitally signed by DIWAKAR

Supplying and fixing following modular switch/ socket on the

7 existing modular plate & switch box including connections but 1.24 - -

excluding modular plate etc. as required.

a Telephone socket outlet 1.24.6 27.00 Each 168 4,536.00 -

b TV socket outlet 1.24.7 5.00 Each 168 840.00 -

c RJ45 socket cat 6 with shutter RA-1 156.00 Each - 487.56 76,060.01

Supplying and fixing two module stepped type electronic fan

8 regulator on the existing modular plate switch box including 1.25 423.00 Each 402 1,70,046.00 -

connections but excluding modular plate etc. as required.

Supplying and fixing following size/ modules, GI box alongwith

9 modular base & cover plate for modular switches in recess etc. 1.27 - -

Supplying and fixing suitable size GI box with modular plate and cover in

front on surface or in recess, including providing and fixing 3 pin 5/6 A

modular socket outlet and 5/6 A modular switch, connections etc. as

Supplying and fixing suitable size GI box with modular plate and cover in

front on surface or in recess, including providing and fixing 6 pin 5/6 &

15/16 A modular socket outlet and 15/16 A modular switch, connections

etc. as required.

Installation ,Testing, Commissioning of wall bracket /ceiling

fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps

per fitting, complete with all accessories including connections etc. as

Supplying and fixing call bell/ buzzer suitable for single phase,

230 V, complete as required.

Installation of exhaust fan in the existing opening, including making good

the damage, connection, testing, commissioning etc. as required.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing

surface/ recessed Steel/ PVC conduit as required.

Wiring for group controlled (looped) light point/fan

point/exhaust fan point/ call bell point ( without independent

switch etc.) with 1.5 sq. mm FRLS PVC insulated copper

conductor single core cable in surface/ recessed PVC conduit,

and earthing the point with 1.5 sq. mm FRLS PVC insulated

copper conductor single core cable etc. as required.

Digitally signed by DIWAKAR

Supplying and fixing suitable size GI box with modular plate and cover in

front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6

17 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. 1.56 197.00 Each 757 1,49,129.00 -

as required. (For light plugs to be used in non residential buildings).

Supplying & fixing suitable size GI box wih modular plate and

cover in front on surface or in recess including providing and

fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve

including connections, painting etc. as required.

Supplying and fixing following way, horizontal type three pole

and neutral, sheet steel, MCB distribution board, 415 V, on

surface/ recess, complete with tinned copper bus bar, neutral

bus bar, earth bar, din bar, interconnections, powder painted

including earthing etc. as required. (But without

MCB/RCCB/Isolator)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve,

miniature circuit breaker suitable for inductive load of following poles in

the existing MCB DB complete with

connections, testing and commissioning etc. as required.

b Double pole 2.10.3 1.00 Each 696 696.00 -

c Three Phase & Neutral 2.10.5 33.00 Each 1301 42,933.00 -

Supplying and fixing 63Amp, four pole, (three phase

and neutral), 415 volts, residual current circuit breaker (RCCB),

21 having a sensitivity current 300 mA in the existing MCB DB RA-3 1.00 Each - 5,906.79 5,906.79

complete with connections, testing and commissioning etc. as

required. Similar to Legrand or equivalent.

Supplying and fixing 40/63A rating, 415 V, 10 kA, "C" curve, miniature

circuit breaker suitable for inductive load of Four poles in the existing MCB

22 DB complete with connections, testing and commissioning etc. as required. RA-4 34.00 Each - 2,604.69 88,559.31

Similar to Legrand DX3 AC MCBs or equivalent.

Supplying and installing following size of perforated painted

with powder coating M.S. cable trays with perforation not more than

23 17.5%, in convenient sections, joined with connectors, suspended from the 4.1 - -

ceiling with M.S. suspenders including bolts & nuts, painting suspenders

etc as required.

a 100 mm width X 50 mm depth X 1.6 mm thickness 4.1.1 100.00 Each 623 62,300.00 -

Digitally signed by DIWAKAR

b 300 mm width X 50 mm depth X 1.6 mm thickness 4.1.4 70.00 Each 866 60,620.00 -

c 600 mm width X 50 mm depth X 1.6 mm thickness 4.1.7 70.00 Each 1482 1,03,740.00 -

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick

including accessories, and providing masonry enclosure with

cover plate having locking arrangement and watering pipe of

2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre

below ground as strip earth electrode, including connection/

25 terminating with G.I. nut, bolt, spring, washer etc. as required. 5.9 200.00 Meter 160.00 32,000.00 -

(Jointing shall be done by overlapping and with 2 sets of G.I. nut

bolt & spring washer spaced at 50mm)

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I.

26 pipe from earth electrode including connection with G.I. nut, 5.11 180.00 Meter 755 1,35,900.00 -

bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in

recess for connections etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess

28 for loop earthing along with existing surface/ recessed conduit/ 5.18 200.00 Meter 50 10,000.00 -

submain wiring/ cable as required.

LED Down lighter (SMD Type) (System lumen efficacy >135 lm/Watt)

Supplying, installation, Testing & Commissioning of LED Recessed /

surface Down lighter (Round /square/Rectangular) SMD type of following

body material with PMMA and prismatic diffuser and construction as per

IS : 10322 with driver as per the requirement with Driver efficiency >85%,

Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -

15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short

& Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR

(Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life

time (LED,Driver & electrical circuitry), life time of minimum 50000

Burning Hours with , 70% of initial Lumen maintained till life ends as per

29 LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 8.3

5700°K / 6000°K /6500°K (As per ANSI Bin) , SDCM(Standard Deviation

Color Matching) <3, Maximum power consumption should not more than

the specified rating and Fixture shall be of relevant BIS standard and trade

mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/

Embossing/ Screen printing on housing. OEM must have its own in house

NABL lab setup for all testing facilities for LED fixtures. complete in all

respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper

conductor single core cable and earthing etc. as required

Digitally signed by DIWAKAR

with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt

output . LM79 & LM80 Test report from NABL lab for all testing required

for LED fixtures as per BIS shall be submitted. Shape size and CCT shall

be as approved by Engineer-in-Charge as per requirement. (Thermal

management: heat sink of aluminum housing such that LED junction

temperature shall not rise above 90°C).

Powder coated die cast / Extruded aluminum Body including trim.

SITC of 12W Extruded aluminium batten available in 2ft run length with

multiple lumen packages and suitable for surface, wall & conduit ounting

(with accessories). similar to Philips Type HSN Code MRP (INR) BN 021

LED12S 6500 PSU GR or equivalent.

Supply and fixing of water tight oblong 10 Watt LED bulkhead luminaire having

pressure diecast housing with driver set confirming to IP 65 and above Protection,

IK08, High purity / transmisivity UV stablized Non yellowish diffuser/ Reflector

for uniform light distribution, ditachable driver set, suitable for 24hrs continuous

32 operation complete in all respect. MR 5.00 Each - 2367.08 11,835.40

1200 system lumen, >120lm/W, PF>0.95, CRI>70, >300V, over voltage

protection, 4KV internal surge protection with 5 year warrenty. CAT-AAA

Digitally signed by DIWAKAR

LED Batten light (System lumen efficacy >135 lm/Watt)

Supplying, installation, Testing & Commissioning of LED surface mounted

Batten light of following body material and construction as per IS : 10322 with

driver (Replaceable) as per the requirement with Driver efficiency >85%

,Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -

15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short &

Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80 , Flicker

free (flicker should be below 5 %), life time (LED,Driver & electrical circuitry),

of minimum 50000 Burning Hours with , 70% of initial Lumen

maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6000°K/

6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching)

<3, Maximum power consumption should not more than the specified rating

and Fixture shall be of relevant BIS standard and trade mark certificate (

T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen

printing on housing. OEM must have its own in house NABL lab setup for

all testing facilities for LED fixtures. complete in all respect i/c

connections with 1.5 sq mm FRLS, PVC insulated copper conductor

single core cable and earthing etc. as required with Minimum 5 year OEM

warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test

report from NABL lab for all testing required for LED fixtures as per BIS

shall be submitted. Shape size and CCT shall be as approved by Engineerin-

Charge as per requirement. (Thermal management: heat sink of

aluminum housing such that LED junction temperature shall not rise above

Powder coated die cast /Extruded aluminum Body (Thickness ≥ 1.20

Digitally signed by DIWAKAR

Supply of 250mm exhuast fan having Built with a durable powder-coated

metal body, this 150 mm exhaust fan brings both style and resilience to

kitchens, bathrooms, or compact spaces.

Equipped with a fast-spinning 1200 RPM motor, it swiftly eliminates

steam, smoke, and odors for a fresher indoor atmosphere.

The compact 250 mm sweep ensures a perfect wall or window installation

without sacrificing airflow.

Precision balanced metal blades deliver steady, powerful airflow while

keeping vibrations and noise minimal.

34 Designed to be energy-efficient, it uses approximately 48 W, offering strong RA-20 51.00 Each - 1,763.37 89,931.66

performance without raising your electricity bill.

Operates quietly around 40–45 dB, making it ideal for use near bedrooms,

studies, or any quiet area.

Comes with a sturdy steel bird guard to prevent insects and debris from

entering, protecting hygiene and motor health.

Featuring a corrosion-resistant finish, it stays looking fresh and functioning

well even in humid conditions.

Maintenance is hassle-free—blades and grill detach easily for quick

cleaning to ensure consistent airflow.

Digitally signed by DIWAKAR

LED Flood Light, powder coated pressure die cast aluminum (System lumen

efficacy ≥120 and <135 lm/Watt)

Supplying, installation, Testing & Commissioning of Flood Light, powder coated

pressure die cast aluminum body with built in or separate driver as per the

requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270

Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade,

internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency

under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for

beam angle 30 deg- 120deg as per the application and the project requirement

deg, suitable tilt able fitting, life time (LED,Driver & electrical circuitry) of

minimum 50000 Burning Hours with 70% of initial Lumen maintained till life

ends as per LM80 extrapolation IES TM-21-11 report , CCT 3000°K / 4000°K /

5700°K /6000°K/6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color

Matching) <5, Maximum power consumption should not more than the specified

rating and Fixture shall be of relevant BIS standard complete in all respect i/c

connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core

cable and earthing etc. as required with Minimum 5 year OEM warranty. System

lumen efficacy ≥120 and <135 lm/Watt output . LM79 & LM80 Test report from

NABL lab for all testing required for LED fixtures as per BIS shall be submitted.

Shape size and CCT shall be as approved by Engineer-in-Charge as per

requirement. (Thermal management: heat sink of aluminum housing such that

LED junction temperature shall not rise above 90°C).

Brush Less Direct Current (BLDC) Fan without Remote

Supply, Installation, Testing and Commissioning of ceiling fan with Brush

Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal(

Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle

kit, safety rope, copper winding, steel/Al body

Power Factor not less than 0.9, Service Value (CM/M/W) minimum as

below, 350 RPM (tolerance as, per IS : 374-2019), THD (Total Harmonic

Distortion) less than 10%, suitable for operation with regulator for speed

control and all remaining accessories including safety pin, nut bolts,

washers, temperature rise=75 0C (max.), insulation resistance more than 2

mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan

compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm

FRLS/HFFR, PVC insulated copper conductor single core cable and

earthing etc. as required.

1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min

Digitally signed by DIWAKAR

Supply and fixing hexagonal Round G.P.fan box approved make made up

of 1.0 mm thick ISI Marked G.P.sheet spot welded Four to Eight holes for

pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm

37 G.P. Sheet made upper & lower cover duly screwed. Fixing with wiring 423.00 Each 220.65 93,334.95 -

conduit laid in the R.C.C. roof before concreting alongwith supply of all 2023 10.18

material, labour, T&P etc. required for proper completion of the work.

Supply Installation Testing and Commissioning of 400mm sweep

38 1500RPM energy efficient BLDC fan with double ball bearing for longer RA-2 2.00 Each - 6,359.54 12,719.08

life similar to CGE RENESA or equivalent.

SITC of 30W Dali copatible light for Auditorium similar to Philips Green

Space G6 or equivalent.

Lightning Arrestor Work - -

Lightning Arrestor: Supply, installation, testing and commissioning of

External Lightning wide area protection system based on Eaarly Streamer

Emission (ESE) technology. Device shall emit electromagnetic impulse in

the form of a streamer into the air microseconds earlier than naturally

40 formed streamers. Device confirmg to NFC 17-102 and UNE 21186 MR 2.00 Each - 62,304.00 1,24,608.00

Standards. Appropriate non penetrating mounting arrangement. The device

shall be mounted at suitable clear to the highest point on the roof top.

(Model selected shall give coverage of 79 M radius @ min 5M height from

Down conductor:Supply, installation, testing and commissioning of 70

41 Sqmm twisted 19-Strand, bare Cu cable on surface/wall / as per site MR 150.00 Metre - 2,510.92 3,76,638.30

requirement and complete in all respect.

Lightning Counter :Supply and installation of counting the number of

lightning strikes without any power supply.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm

thick including accessories, and providing masonry enclosure

with cover plate having locking arrangement and watering pipe

of 2.7 metre long etc. with charcoal/ coke and salt as required.

44 Test Link :Supply and installation of test link in weather proof IP 65 BOX. MR 6.00 Each - 2,832.00 16,992.00

Supply, installation, testing and commisioning of 2 x 25W LED Aviation

abstruction light medium bay type 62, complete with lamp, lamp holder,

Condenser necessary connecting wire, 1 X 25 AV with all necessary

hardware, accessories as required for complete installation. Rate shall

include the cost of necessary steel structures , fixing arrangements in this

item. Refer drawing.

Digitally signed by DIWAKAR

Online UPS- Input supply: Three Phase, Output supply: Three Phase

Supplying, installation, Testing & Commissioning of of following capacity

at full load (Unity Power Factor) at operating temperature 0 to 40 deg C,

Relative humidity 0 to 95%, Online double conversion true sine wave

Uninterrupted hot swappable (allow for the replacement or addition of

battery modules without shutting down the entire system) modular Power

Supply (UPS) system with N+1 modules (N denotes total number of

46 moduels requird for rated capacity). The UPS shall include a Rectifier, -

inverter, battery bank suitable for 30 minutes back up (Battery VAH

capacity shall not be less than 1600 VAH per KVA of UPS rating per Hour

backup time) on full load (Battery shall be VRLA, SMF in ABS Container)

and Static Bypass switch alongwith provision for manual bypass, suitable

isolation transformer for additional protection against neutral faults etc.

UPS shall have inbuilt

phase sequence correction. The UPS systems offered are to be of the latest

technology with Digital Control Microprocessor based for reliable operation

using Insulated Gate Bipolar Transistor (IGBT)'s both for the rectifier &

inverter (3 Level) with PWM (Pulse Width Modulation). The quality of

design, manufacturing and inspection process should confirm to the relevant

International standards such as IEC/EN/VDE. The operating efficiency of

the UPS systems shall be >96% while operating on battery mode and

delivering quality power to the 100% non-linear loads. Current total

harmonic effect(ITHD) on the input grid shall be < 5% at 50 %load. (The

inductor (L) and a capacitor (C)) filters shall be included in UPS cost),

extreme power factor kit to be included to limit the input power factor (PF)

to 0.99 and output power factor shall be unity (i.e. kw rating of the UPS

shall be kva rating x 1 ), however UPS shall be suitable to take load at 0.7

laging to 0.7 leading power factor loads. UPS shall be suitable for incoming

supply AC : 3Phase 400V +/-20%, 50 Hz +/-5 Hz, AC Output voltage:

3Phase 415 Volt, 50 Hz +/- 0.2Hz, Overload capacity of 120% for 10 mins,

Sine wave output. Non condensing, noise level less than 60db at 1 meter

distance, protections: Input Under voltage over voltage, abnormal out

voltage, battery over charging, output over current, short circuit protection,

battery deep discharge protection, 10KV surge. UPS must comply with low

voltage electromagnetic compatibility (EMC) achieved as per EN 6204,

EN6204 Part I and Part 2, it shall be a Voltage and Frequency Independent

(VFI)-type UPS. Communication RS232/RS485/SNMP port open protocol

Digitally signed by DIWAKAR

integration, all hardware & software for iOT Communication as per

approved by Engineering in charge. Required battery racks and

interconnecting copper conductor cables of suitable size and connectors and

all required accoseries are inclusive of the cost). This system must provide a

means for logging and alarming of all monitored points plus email

notification. Forced air-cooling with integral inbuilt fans with redundancy

(if one fan fail UPS should be able to handle at least 80% of the load, Noise

Level 65 DB at 1 meter distance. The system shall be in compliance IEC

62040- 1,2 & 3, IS: 16242 and CPWD Specification. Display Panel

(minimum) (In-build 5 inch or more LC Display / LED ) to display : a)

Input: Voltage, current, Frequency. b) Bypass: Voltage, Frequency. c)

Output: Voltage, frequency, Current.

d) Battery: Voltage, Capacity. e) Load: KVA, KW, Percentage.

f)Temperature: STS, Inverter, PFC. g) Event Logging & Statistical Data

LCD/LED): UPS should capture and display up to 3000 events like: Over

temperature / DC Bus Fail / Fan Fail / Fuse Fail / Overload / Short-circuit /

Device Fail / Inverter Fail / Rectifier Fail / Bypass Fail, etc. h) Statistical

Data: No. of power failures / Transfers to Bypass / Total Running time, etc.

i) Mains Mode of Operation /Battery Mode of Operation / Bypass feeding

the load /UPS Fault /Battery charging and discharging, overload, battery

voltage and battery capacity. j) Audible Alarms : Mains Failure, Battery 26.2

Low Alarm, UPS Overload, Fault, Shutdown, Input Over, Under Voltage,

Output Over, Under Voltage, Battery Over, Under Voltage, Over Load and

short circuit, Over Temperature. The UPS should have QR code which

should contain drawing, test report OEM manual,Geo- Tag of

manufacturing location etc

a 100KVA (Each Power module shall be < 25 KVA) 26.2.7 1.00 Set 12,76,967.00 12,76,967.00 -

Digitally signed by DIWAKAR

SITC of LT switchgear panels suitable for 433 V, 3 phase, 4 wire, 50 Hz

power distribution system. The panel shall be Indoor, free standing, floor

mounting, sheet metal clad, cubicle, dead front, dust and vermin proof type

compartmentalised design fabricated out of 14 SWG CRCA sheet steel,

complete with colour coded, heat shrinkable PVC insulated, aluminium bus

bars and separate earth bus bar of adequate cross section through out the

length of the panel. The incoming and outgoing feeders shall be

accommodated in a fully segregated, modular multitier arrangement with - -

adequate size and distinct cable alley, bus bar alley/chamber. The panel

shall be complete with name plate, earthing, numbering, danger plate etc. as

per specifications and drawings as required. The panel shall withstand the

fault level of 50kA as per Single Line Diagram. The Panel shall also be

capable to communicate status like ON/OFF/ Trip through

Modbus/Ethernet for major component like ACB, MCCB, MCB &

Multifunation meters.

The Main LT Panel shall use all draw out type breakers suitable for 415 V

AC, 3 phase, 50 Hz, 3 phase 4 wire supply system. Panel shall have

Buscoupler switching, auto operation of incommer and bus coupler, auto

start of D.G. Sets, auto D.G. running by pre set timing, auto changeover etc

and having following incomming and outgoing Air Circuit - -

Breakers,microprocessor release for overload, short circuit, instantaneous &

earthfault protection with Current & Voltage metering & LCD display.

Air Circuit Breaker with microprocessor release ge metering & LCD display

, with ready to clsoe indicator, should have capability to communicate ON

/OFF/ Trip Status on Modbus/Ethernet and as per the detail specification of

ACB (Icu=Ics=Icw=65 KA (1 sec). MCCB, with microprocessor release

with LSIG protection functionand should not derate upto 50 decree

Centrigrate as per testing guideline as per IEC 60947-2 and all the ACB - -

upto 2500Amp ACB should have same frame size LCD display for fault

trip history, haivng current limiting feature, double break mechanism &

capability to communicate ON /OFF/ Trip Status on Modbus/Ethernet. (65

1 Nos. 630 Amp FP EDO ACB 65KA LSIG having S/C, E/F O/C

protection, LCD Display having specs as per attached annexture From

R,Y,B Phase indication Lamp with control MCB

On, Off, Trip Status Indication with control MCB

Inbuilt Zone Slelective Interlocking function

Multifunction Meter

Digitally signed by DIWAKAR

1 Nos. 250 Amp FP MCCB 50KA LSIG having S/C, E/F O/C protection,

LCD Display having specs as per attached annexture From

R,Y,B Phase indication Lamp with control MCB

On, Off, Trip Status Indication with control MCB

Inbuilt Zone Slelective Interlocking function

Multifunction Meter

1 Nos. 100 Amp FP MCCB 25KA LSIG having S/C, E/F O/C RPR

protection, LCD Display having specs as per attached annexture From

R,Y,B Phase indication Lamp with control MCB

On, Off, Trip Status Indication with control MCB

Inbuilt Zone Slelective Interlocking function

Multifunction Meter

1 Nos. 250 Amp FP ATS - -

1 Nos. 800 Amp FP busbars of aluminium alloy as per SLD. - -

1 Nos. 320 Amp FP busbars of aluminium alloy as per SLD. - -

7 Nos.100 Amp FP MCCB 25 KA, having specs as per attached annexture

R,Y,B Phase indication Lamp with control MCB - -

On, Off, Trip Status Indication with control MCB

METER PANEL+HVAC + Spare

7 Nos. 200 Amp FP MCCB 25 KA, having specs as per attached

annexture having

R,Y,B Phase indication Lamp with control MCB - -

On, Off, Trip Status Indication with control MCB

Officre FF + Spare

3 Nos. 63 Amp FP MCCB 25 KA

On, Off, Trip Status Indication with control MCB - -

Multifunction Meter

Short Circuit Breaking capacity should not less than 50KA. - -

RELAYS AS PER SLD - -

48 UPS Output Panel MR 1.00 Set 2,42,608.00 2,42,608.00

1 Nos. 200 Amp MCCB 25KA LSIG having S/C, E/F O/C protection,

R,Y,B Phase indication Lamp with control MCB

On, Off, Trip Status Indication with control MCB - -

Inbuilt Zone Slelective Interlocking function

Multifunction Meter

Digitally signed by DIWAKAR

1 Nos. 250 Amp FP busbars of aluminium alloy as per SLD. - -

6 Nos. 100 Amp FP MCCB 25 KA

On, Off, Trip Status Indication with control MCB - -

PDB+ACDB +Spare

Short Circuit Breaking capacity should not less than 16KA. - -

RELAYS AS PER SLD - -

49 Floor Power & HVAC Panel MR 4.00 Set 2,19,008.00 8,76,032.00

1 Nos. 200 Amp MCCB 25KA LSIG having S/C, E/F O/C protection,

R,Y,B Phase indication Lamp with control MCB

On, Off, Trip Status Indication with control MCB - -

Inbuilt Zone Slelective Interlocking function

Multifunction Meter

1 Nos. 250 Amp FP busbars of aluminium alloy as per SLD. - -

12 Nos. 63 Amp FP MCB 10 KA

On, Off, Trip Status Indication with control MCB - -

PDB+ACDB +Spare

Short Circuit Breaking capacity should not less than 16KA. - -

RELAYS AS PER SLD - -

50 Floor Light Panel & Floor UPS Panel MR 8.00 Set 1,59,595.00 12,76,760.00

1 Nos. 100 Amp MCCB 25 KA LSIG having S/C, E/F O/C protection,

R,Y,B Phase indication Lamp with control MCB

On, Off, Trip Status Indication with control MCB - -

Inbuilt Zone Slelective Interlocking function

Multifunction Meter

1 Nos. 125 Amp FP busbars of aluminium alloy as per SLD. - -

6 Nos. 32 Amp FP MCB 10 KA

On, Off, Trip Status Indication with control MCB - -

Short Circuit Breaking capacity should not less than 16KA. - -

RELAYS AS PER SLD - -

Digitally signed by DIWAKAR

Supply of aluminium conductor PVC insulated armoured served sheathed

cables 1100 Volts grade on cable tray as directed by engineer incharge

complete in all respect including The armouring of the cable shall be

properly connected with the earth conductor by clamps etc.

Supplying and making end termination with brass compression gland and

aluminium lugs for following size of PVC insulated and PVC sheathed /

XLPE aluminium conductor cable of 1.1 KV grade as required.

Laying and fixing of one number PVC insulated and PVC

53 sheathed / XLPE power cable of 1.1 KV grade of following size 10.8

on cable tray as required.

a Upto 35 sq. mm (clamped with 1mm thick saddle) 10.8.1 250.00 Meter 53.00 13,250.00 -

b Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp) 10.8.2 200.00 Meter 109.00 21,800.00 -

Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat

d Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp) 10.8.4 250.00 Meter 226.00 56,500.00 -

Providing, laying and fixing following dia RCC pipe NP2 class

(light duty) in ground complete with RCC collars, jointing with

cement mortar 1:2 (1 cement : 2 fine sand) including trenching

(75 cm deep) and refilling etc as required. 300mm Dia

Supplying and laying of following size DWC HDPE pipe ISI marked along

with all accessories like socket, bend, couplers etc.

conforming to IS 14930, Part II complete with fitting and cutting,

jointing etc. in the existing trench, complete as required

Grand Total (DSR+MARKET BASED ITEM) 2,60,37,494.71

Grand Total (DSR+MARKET BASED ITEM) 2,60,37,494.71

Grand Total (DSR+MARKET BASED ITEM) In Lac 260.37

Grand Total (DSR+MARKET BASED ITEM) In Lac 260.37

Digitally signed by DIWAKAR

Detailed Estimate Based On DSR-2025 With Cost Index & Market Rate

Project - Proposed Construction of Integrated Township at Chandrapura, Jharkhand.

Name Of Work -DE Nobili School Fire Detection Alarm & PA System Work

Rate as per D.S.R. 2025 MARKET BASED

Sr.No. Particulars Sch.No. Qty Unit Amount Rate Amount

Fire Alarm System :

Supplying, installation, testing & commissioning of main

control and indicating panel made out of 16 SWG MS sheet

to accommodate the following items duly powder coated in

approved colour with louvers for ventilation, locking

arrangement, audio and visual indication for fire alarm and

public address system, monitoring system including

connections, interconnections etc complete as required.

1 10 Zone panel for fire alarm system 28.1.10 1 NOS 75,339.00 75,339.00

250 Watt amplifier racks suitable for operation on 230V

AC/24V DC supply conforming to IEC-268-3 complete with all

accessories as required - 2 Nos.(one to act as standby)

Talk back master station with LED PTT (press to talk) push

button for operation on 230V AC/24 V DC supply conforming

to IEC-268 for simplex mode of operation/communication

suitable for 20 Nos.talk back unit -1 set.

Digitally signed by DIWAKAR

Annoucement control desk suitable for selection of different

zones selectively and ON ALL CALL switch with visual

indication etc. complete as required -1 set.

Amplifier change over switch for inter changing amplifier -1 No.

Monitor panel for loudspeaker complete with output

selector, ON/OFF switch, fuse, visual indications etc.

complete as required- 1 No.

Gooseneck microphone with stand and ON/OFF switch- 1 No.

Main ON/OFF switch, fuse indication lamps, DC and AC

voltmeters & ammeters, terminal blocks etc. complete as

required -1 set.

Battery charger trickle cum boost to take complete load of

fire alarm & PA system complete with all accessories

including providing & fixing of 2 nos.12 volt, 60 AH each

sealed maintenance free batteries -1 set.

Supplying, installation, testing & commissioning of addressable

fire control module complete as required.

Supplying, installation, testing & commissioning of manual call

boxes of MS construction in surface/recess with stainless steel

chain & hammer assembly complete with glass and push button

etc. as required.

Supplying, installation, testing & commissioning fire alarm

sounder with facility to make announcement, mounted in M.S.

4 box (16 SWG) with hinged cover plate & suitable for operation 28.1.6 12 NOS 600.00 7,200.00 -

with amplifier i/c line matching transformer etc. complete as

Digitally signed by DIWAKAR

Supplying, installation, testing & commissioning of fire fighter

telephone handset complete as required.

Supplying, installation, testing & commissioning talk back slave

station in surface/recess suitable for operation on simplex

6 mode complete with P.T.T. knob & speaker/microphone 28.1.8 2 NOS 963.00 1,926.00 -

enclosed in a M.S.(16 SWG)/ ABS box with break glass in front

etc. complete as required.

Supplying & laying of 2x1.5 sqmm fire survival armoured cable,

600/1000V rated with annealed copper conductor having glass

mica fire barrier tape covered by an extruded layer of Cross

Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH

inner bedding, steel wire armouring & LSZH outer sheath

complete as required.

GRAND TOTAL (PWD+DSR+MARKET BASED ITEM) 2,81,769.00

GRAND TOTAL (PWD+DSR+MARKET BASED ITEM) 2,81,769.00

GRAND TOTAL (PWD+DSR+MARKET BASED ITEM) IN LAC 2.82

GRAND TOTAL (PWD+DSR+MARKET BASED ITEM) IN LAC 2.82

Digitally signed by DIWAKAR

Detailed Estimate Based On DSR-2025 With Cost Index & Market Rate

Project - Proposed Construction of Integrated Township at Chandrapura, Jharkhand.

Name Of Work -DE Nobili CCTV Surveillance System Work

Rate as per D.S.R. 2025

Sr.No. Particulars Sch.No. Qty Unit Amount Rate Amount

Supplying and fixing of following sizes of medium class PVC conduit

along with accessories in surface/recess including cutting the wall and

making good the same in case of recessed conduit as required. 25mm

Grand Total (DSR+MARKET BASED ITEM) 3,62,880.00

Grand Total (DSR+MARKET BASED ITEM) 3,62,880.00

Grand Total (DSR+MARKET BASED ITEM) 3,62,880.00

Grand Total (DSR+MARKET BASED ITEM) 3,62,880.00

Digitally signed by DIWAKAR

Detailed Estimate Based On DSR-2025 With Cost Index & Market Rate

Project - Proposed Construction of Integrated Township at Chandrapura, Jharkhand.

Name Of Work -DE Nobili School Lift Work

Rate as per P.A.R. 2025

Sr.N Rate as per

Particulars Sch.No. Qty Unit Amount Rate Amount

Supply Installation Testing and Commissioning of lift

with power operated doors and AC variable voltage and

variable frequency controls having speed of minimum

1.5m/sec as per CPWD specifications.

Grand Total (DSR+MARKET BASED ITEM) 21,55,000.00

Grand Total (DSR+MARKET BASED ITEM) 21,55,000.00

Grand Total (DSR+MARKET BASED ITEM) 21,55,000.00

Grand Total (DSR+MARKET BASED ITEM) 21,55,000.00

Digitally signed by DIWAKAR

Detailed Estimate Based On DSR-2025 With Cost Index & Market Rate

Project - Proposed Construction of Integrated Township at Chandrapura, Jharkhand.

Name Of Work -DE Nobili School EPABX & AV System Work

Rate as per D.S.R. 2025 MARKET BASED

Sr.No. Particulars Sch.No. Qty Unit Amount Rate Amount

A EPABX SYSTEM

1 S/f of I/O Boxes Krone connectors ,with connection etc. MR -

2 Wiring of Jelly Filled telephone Cable in existing pipe for system with connection. MR -

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories

like socket, bend, couplers etc.

conforming to IS 14930, Part II complete with fitting and cutting,

jointing etc. in the existing trench, complete as required. 100mm Dia

Grand Total (DSR+MARKET BASED ITEM) 1,10,730.00

Grand Total (DSR+MARKET BASED ITEM) 1,10,730.00

Grand Total (DSR+MARKET BASED ITEM) 1,10,730.00

Grand Total (DSR+MARKET BASED ITEM) 1,10,730.00

Digitally signed by DIWAKAR

Detailed Estimate Based On DSR-2025 With Cost Index & Market Rate

Project - Proposed Construction of Integrated Township at Chandrapura, Jharkhand.

Name Of Work -DE Nobili School AV System Work

Rate as per D.S.R. 2025 MARKET BASED

Sr.No. Particulars Sch.No. Qty Unit Amount Rate Amount

A EPABX SYSTEM

Conference hall: supplying, installation, testing and commissioning of audio

visual/conference system (Rate applicable on carpet area of Hall only)

Grand Total (DSR+MARKET BASED ITEM) 10,50,659.85

Grand Total (DSR+MARKET BASED ITEM) 10,50,659.85

Grand Total (DSR+MARKET BASED ITEM) In Lac 10.51

Grand Total (DSR+MARKET BASED ITEM) In Lac 10.51

Digitally signed by DIWAKAR

Detailed Estimate Based On DSR-2025 With Cost Index & Market Rate

Project - Proposed Construction of Integrated Township at Chandrapura, Jharkhand.

Name Of Work -DE Nobili School Lift Work

Rate as per D.S.R. 2025

Sr.N Rate as per

Particulars Sch.No. Qty Unit Amount Rate Amount

Supplying Installation, Testing and Commissioning of

on-grid Solar Photovoltaic Power Plant conforming to

various applicable standards BIS, IEC, MNRE

guidelines, the Central Electricity Authority

Regulations and CPWD Specifications as amended up

to date, consisting of Mono/Poly Crystalline silicon

1 solar cells module, net metering facility, necessary

control, protections, earthing, cabling, mounting

structure, junction boxes, power conditioning units,

Real time online web interfaced Data Monitoring

System, Distribution panels, grid connecting

arrangement, conduits, pipes, cable trays and other

accessories etc. as required.

a) High Energy Efficiency Solar Photovoltaic Module of

capacity 330 Wp or above, manufactured in India,

conforming to IS 14286/IEC 61215, IS/IEC 61730-

Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic

Module conversion efficiency shall not be less than

23% at STC with temperature coefficient of Pmax

better than -0.30% per 0C. PV modules used in solar

power plants/ systems must be warranted for their

output peak watt capacity, which should not be less

than 90% at the end of 10 years and 80% at the end of

25 years. Solar Modules shall be designed to operate

Digitally signed by DIWAKAR

in relative humidity upto 100% with temperature

between -10 0C and +85 0C. Further, each PV module

used in any solar power project must have Radio

frequency identification tag with information such as

name of manufacturer, month and year of

manufacturing, country of origin (separately for Solar

cell and module), I-V curve, Unique Serial No and

Model No of the module, Wattage, Im, Vm and FF,

name of test lab issuing IEC certificate.

b)Power Conditioning Unit (PCU) of 350-800 V DC

Input voltage range and 415 V AC, three phase, 4

wire, 50Hz +/- 2.5 Hz, output voltage suitable to

generate AC with a variation of 10% at nominal

voltage. Power with efficiency not less than 97%, total

harmonic distortion less than 3% and suitable for

ambient temperature from 0 to 50 0C, Minimum IP-65

for outdoor and Minimum IP 21 for indoor, Built-in

meter and data logger, MPPT, switching devices

IGBT/MOSFETs and controller Microprocessor /DSP.

PCU/inverter shall be capable of complete automatic

operation including wake-up, synchronization &

shutdown. The PCU shall be able to withstand

unbalanced load conforming to IEC standard with

shutdown/standby mode. It must be provided with grid

islanding along with manual disconnect pole isolation

switch besides automatic disconnection. Minimum

protections: Mains Under / Over Voltage, Over current,

Over/Under grid frequency, Over temperature, Surge

voltage induced at output due to external source,

Short-circuit, Lightening, Anti Islanding (for grid synch.

Mode) and other protections as per applicable

standards. LCD/LED display of minimum parameters:

DC input voltage, DC current, AC Voltage and current

(all 3 phases, in case of 3 phase), Instantaneous &

cumulative AC output power, Daily DC energy

produced and other parameters applicable standard.

Communication interface RS 485 / RS 232.

Digitally signed by DIWAKAR

c) Module mounting structure: The roof top solar plant

generation units shall be installed by using supporting

Aluminium/Galvanized MS structure (mass of zinc

coating shall be as per IS4759 ) having minimum head

room clearance of 2.4 meter above the terrace level /

ground level. The mounting structure would be

designed to sustain wind load and seismic parameter

of the site of installation. All the structure shall be

design as per applicable BIS code and the material

shall also confirm the applicable BIS Code. Structural

material shall be corrosion resistant and electrolytically

compatible with the materials used in the module

frame, its fasteners, nuts and bolts. The suitable

arrangements for maintenance and cleaning shall be

d) Real time online web interfaced Data Monitoring

System complete with accessories for various

parameters such as Solar Irradiance, temperature, AC

Output Voltage and current, Output Power, Power

factor, DC Input Voltage and Current, Time Active,

Time disabled, Time Idle, Power produced and other

parameters as per standard practices.

e) Array junction box & Main junction box with IP 65

protection and termination arrangement for incoming

and outgoing cable along with glands, lugs and other

accessories etc. as required. Each junction box shall

be made of GRP/FRP/Powder Coated Aluminium /cast

aluminium alloy with full dust, water & vermin proof

arrangement with High quality Suitable capacity Metal

Oxide Varistors(MOVs) (semiconductor diode with

resistant applied voltage)/ surge arrestors and suitable

Reverse Blocking Diodes, isolation switches isolate

the DC input to Inverter, copper bus bar etc.

Digitally signed by DIWAKAR

f) Lightning, surge voltage protection, earthing

protection and grid islanding.

g) Cables: Connections & Interconnections by

required size IR/UV protected XLPE insulated copper

conductor 1.1 kV grade armored power and control

cables(ISI Marked) along with supplying & fixing of

necessary channel/conduit, GI cable trays, supports,

lugs, thimble and other accessories etc. as required.

h) DC Distribution Board And AC Distribution Panel

Board: IP65, free standing, metal cladded, having

copper bus bar, having required protection and control

gears, connection-interconnection, etc. as required.

Grand Total (DSR+MARKET BASED ITEM) 27,14,000.00

Grand Total (DSR+MARKET BASED ITEM) 27,14,000.00

Grand Total (DSR+MARKET BASED ITEM) 27,14,000.00

Grand Total (DSR+MARKET BASED ITEM) 27,14,000.00

Digitally signed by DIWAKAR

Name of Project : CONSTRUCTION OF INTEGRATED TOWNSHIP AT CHANDRAPURA, JHARKHAND

Final Abstract (fire fighting)

Amount as per Amount as per Amount as per

DSR -2023 Items DSR -2025 Items Non -Scheduled

(A) (B) Items (C)

S. No. Description

I. FIRE PUMPS AND HYDRANT WORKS 9,22,954.00 -

II. PIPING FOR FIRE FIGHTING SYSTEM 31,416.78 11,69,212.00 -

III FIRE EXTINGUSHER AND HYDRANT 7,47,162.18

Grand Total A+B 28,70,744.96

Grand Total A+B 28,70,744.96

Digitally signed by DIWAKAR

DETAILED ESTIMATE

S. NO. (FIRE DSR-

2025/NS) DESCRIPTION UNIT QTY RATE AMOUNT (IN RS.)

SUBHEAD-I(A): FIRE PUMPS AND HYDRANT WORKS (NON SCHEDULED ITEMS)

1 27.4 FIRE ROOF PUMPS - ELECTRICAL

Supplying, installation, testing and commissioning of electric driven

terrace pump suitable for automatic operation and consisting of

following, complete in all respects, as required: (Terrace Pump)

Horizontal type, multistage, centrifugal pump of cast of iron body and

bronze impeller with stainless steel shaft, mechanical seal conforming to

Suitable HP squirell cage induction motor TEFC type suitable for

operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of

protection for enclosure, horiziontal foot mounted type with Class-'F'

insulation, conforming to IS-325.

M.S fabricated, common base plate, coupling, coupling guard,

foundation bolts etc. as required.

Suitable cement concrete foundation duly plastered and with anti

vibration pads.

Providing & fixing of pressure switch in M.S. pipe line including

2 27.22 connection etc. as required. Each 1 1,670.00 1,670.00

Digitally signed by DIWAKAR

3 27.20 Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS

sheet, 1200 mm in height with air release valve on top and flanged

connection to riser, drain arrangement with 25 mm dia gun metal wheel

valve with required accessories, pressure gauge and paintingwith

synthetic enamel paint of approved shade as required. Each 1 19,402.00 19,402.00

4 Supply, installation, testing, trial run and commissioning of hydrants all

complete as required and as approved

Fire Hose Cabinet

Supplying and fixing single headed internal hydrant valve with

instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast

iron wheel ISI marked conforming to IS 5290 (Type -A) with blank

5 27.9 Gunmetal/Stainless Steel cap and chain as required :

27.9.2 Single headed Stainless steel Each 26 6,632.00 1,72,432.00

Supplying and fixing first-aid Hose Reel with MS construction spray

painted in post office red, conforming to IS 884 complete with the

6 27.17 following asrequired.

20 mm nominal internal dia water hose thermoplastic (Textile

reinforced) type -2 as per IS: 12585

20 mm nominal internal dia gun metal globe valve & nozzle.

Drum and brackets for fixing the equipmets on wall.

Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia

male and female couplings duly bound with GI wire, rivets etc.

7 27.16 conforming to IS 636 (type-A) as required :

27.16.2 Stainless steel (Grade 304) Each 54 4,667.00 2,52,018.00

Digitally signed by DIWAKAR

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm

nominal internal diameter size nozzle conforming to IS 903 suitable for

instantaneous connection to interconnect hose pipe coupling as required

27.18.2 Stainless steel (Grade 304) Each 26 3,402.00 88,452.00

Supplying and fixing orifice plate made out of 6 mm thick stainless steel

(Grade 304) with orifice of required size to be fitted between flange &

landing valve of external and internal hydrants to reduce pressure at the

outlet to the level of 3.5 kg/cm2 complete as required. Each 26 1,436.00 37,336.00

Supplying and fixing of fire brigade connection of cast iron body with gun

metal male instantaneous inlet couplings complete with cap and chain as

reqd. for suitable dia MS pipe connection conforming to IS 904 as

11 27.19 required :

TOTAL C/F TO SUMMARY 9,22,954.00

Digitally signed by DIWAKAR

SUBHEAD-I (B): PIPING FOR FIRE FIGHTING SYSTEM

Excavating trenches of required width for pipes, cables, etc including

excavation for sockets, and dressing of sides, ramming of bottoms, depth

upto 1.5 m including getting out the excavated soil, and then returning

the soil as required, in layers not exceeding 20 cm in depth including

consolidating each deposited layer by ramming, watering, etc. and

12 disposing of surplus excavated soil as directed, within a lead of 50 m :

All kinds of soil

2.10.1.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Cum 1 376.91 376.91

Civil 4.5 Providing and fixing up to floor five level precast cement concrete string

or lacing courses, copings, bed plates, anchor blocks, plain window sills,

shelves, louvers, steps, stair cases, etc. including hoisting and setting in

position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of

required centering, shuttering and finishing smooth with 6mm thick

cement plaster 1:3 (1 Cement : 3 fine sand) on exposed surfaces

1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm

Civil 4.5.1 nominal size). Cum 1.00 10815.49 10,815.49

Digitally signed by DIWAKAR

Constructing masonary chamber 90 x 90 x100 cm. inside with 75 class

designation brickwork in cement mortar 1:5 ( 1 cement : 5 fine sand) for

sluice valve with CI surface box 100 mm top dia. 180 mm bottom dia.

And 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix ( 1

cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

necessary excavation foundation concrete 1 :5 :10 (1 cement : 5 fine

sand : 10 graded stone aggregate 40 mm nominal size and inside

plastering with 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with

a floating coat of neat cement complete as per standard design with FPS

Providing and fixing C.I. double acting air valves of approved quality with

bolts, nuts, rubber insertions etc. complete ( The tail pieces, tapers etc. if

15.0 Civil 18.59 reqd. will be paid separately)

TOTAL C/F TO SUMMARY 31,416.78

Digitally signed by DIWAKAR

SUBHEAD-II (B):PIPING FOR FIRE FIGHTING SYSTEM

Supplying, fixing, testing & commissioning of double flanged sluice valve

of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI

marked complete with nuts, bolts, washers, gaskets and conforming to IS

16 27.12 780 of following sizes as required :

Providing, installation, testing and commissioning of stainless steel

Ystrainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet

17 27.15 with 3 mm dia holes with stainless steel flange.

Providing, installation, testing and commissioning of non-return valve of

following sizes confirming to IS: 5312 complete with rubber gasket, GI

18 27.14 bolts, nuts, washers etc.as required :

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6

rating with bronze/gunmetal seat duly ISI marked complete with nuts,

bolts, washers, gaskets conforming to IS 13095 of following sizes as

19 27.11 required :

Digitally signed by DIWAKAR

Supplying and fixing of fire brigade connection of cast iron body

with gun metal male instantaneous inlet couplings complete with

20 27.19 cap and chain as reqd. for suitable dia MS pipe connection

conforming to IS 904

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe

conforming to IS 3589/IS:1239 including Welding, fittings like elbows,

tees, flanges,tapers, nuts bolts, gaskets etc. and fixing the pipe on the

wall/ceiling with suitable clamp/support frame and painting with two or

more coats of synthetic enamel paint of required shade complete as

21 27.7 required : (Above Ground)

Threaded joint upto 50mm diameter pipe.

Welded joint above 50mm diameter pipe.

c 27.7.8 150 mm nominal bore (class C) Rm 10 4,299.00 42,990.00

d 27.7.7 100 mm nominal bore (class C) Rm 260 3,077.00 8,00,020.00

e 27.7.6 80 mm nominal bore (class C) Rm 10 2,277.00 22,770.00

g 27.7.4 50 mm nominal bore (class C) Rm 7 1,557.00 10,899.00

J 27.7.1 25 mm nominal bore (class C) Rm 7 920.00 6,440.00

TOTAL C/F TO SUMMARY 11,69,212.00

Digitally signed by DIWAKAR

SUBHEAD- III (B): FIRE EXTINGUSHER AND HYDRANT (NON SCHEDULED ITEMS)

Providing and fixing carbon-di-oxide type fire extinguishers consisting of

welded M.S. cylindrical body, internal discharge tube, discharge nozzle,

suspension bracket, conforming to IS 2878, finished externally with red

enamel paint and fixed to wall with brackets complete with internal

1 NS-1 charges.

Providing & Fixing of stored pressure Fire Extinguisher ABC powder type

(Mono Ammonium Phosphate Powder) Magnetic Pressure Gauge having

the facility to check at site, Discharge Time less than 9 Secs, Controllable

discharge mechanism, Range minimum 4 Meters, applicable on Class

A,B,C and electrically started Fire, A Rating- 21A, B Rating 55B as per BS

EN-3 BIS 15683 marked, Can Construction : Deep drawn & CO2 Mig

welded, Valve Construction : Forging & Machining, Internal Coating of

Can : Epoxy Powder coating, External Coating ofCan : Epoxy Polyster

Powder coating, Sheet metal thickness : 1.60MM, Helium LeakDetection

2 NS-2 Tested, Warranty.

Providing and fixing angle iron (40 mm x 40 mm x 5 mm) MS door frame

900x2100 door capable of accommodating fire hose reel, landing valve,

hose pipes, fittings & accessories. The door shall have a front glass with

lock and key arrangement & shall be painted with post office red colour

(approval shall be taken on the basis of submitted sample before

ordering) Cost of fire extinguishers not included in item rate. (Liasioing

with civil contractor for making 900x600x2100 Recessed type mansoary

3 NS-3 box (by civil contractor). Each 26 13,524.56 3,51,638.47

Digitally signed by DIWAKAR

4 NS-4 Providing and fixing of Fire Axe Each 26 644.03 16,744.69

5 Providing, fixing, testing and commissioning of full way level

operated forged brass ball valve of brass body with forged brass

hard chrome plated steel ball tested to a pressure not lass than 15

kg/sq.cm with threaded/flanged complete with nuts, bolts,

gaskets, washers etc. as required complete as per direction of

NS-5 Engineer incharge.

6 NS-6 ROOF FIRE PANELS:

Supply, installation, testing and commissioning of followingintegrated,

cubicle type,dead front, extensible, sheet steel control panel. The panel

shall be suitable for 440 volts, 50 cycles, 4 wire supply Item 1 55,835.33 55,835.33

The following components and accessories shall be mounted with ineach

One no 100 amps TP incoming MCCB with the following:

0-500 volts 96 x96 square mm voltmeter with slector switch and control

0-100 amps 96 x96 square mm ammeter with CT's and slector switch- 1

Including all elecal works

Phase indicating lamp with toggle switches.

Indication lamps for ON/OFF/TRIP status

Outgoing Feeders / Starters as below:

100 ATP MCCB with star / delta as starter suitable for 30 HP motor for

Downcomer Pump - 1 Set

Provision in control panel to connect flow switch for autmatic operation

of roof fire pumps.

TOTAL C/F TO SUMMARY 7,47,162.18

Digitally signed by DIWAKAR

CONSTRUCTION OF INTEGRATED

No. NSI Description Unit QTY NSI RATE SI Rate NSI AMOUNT

HVAC ESTIMATE FOR DVC SCHOOL BLOCK, JHARKHAND

BILL OF QUANTITIES

1) Sub Head 'A' - Machinery INR 8,13,549 -

2) Sub Head 'C' - Ducting & Grilles INR 6,33,500 2,56,607

3) Sub Head 'D' - HVAC Electric Work INR 3,58,857 1,77,400

Sub Total Estimated Cost INR 18,05,906 4,34,007

Grand Total Estimated Cost INR 22,39,913

Grand Total Estimated Cost INR 22,39,913

PART - I : AIR CONDITIONING SYSTEM

SUB HEAD - "A" : MACHINERY

13 NSI Axial Flow Fan For smoke Exhaust

Supply, installation, testing and commissioning of ceiling mounted Tube Axial flow

fans with adjustable pitch blade, MS / GI long casing (2mm thick up to 800 mm dia

fan, 3 mm thick from 900 to 1250 mm dia & 4 mm thick above 1300 mm dia) , cast

aluminium alloy impeller complete with TEFC (Motor Efficiency IE3) Sq. Cage

Induction motor suitable for 415 volts ± 10%, 50Hz ± 3 %, three phase A.C supply

with support, mountings, vibration isolators, fire retardant flexible canvass

connector 150 mm deep (Inlet & Outlet as required), bird screen (Inlet & Outlet as

required) etc. & of following capacity. The complete fan along with motor shall be

suitable for 250 °C temperature rated for 2 hours. Fan outlet velocity shall be limited

to maximum of 16 m/sec. Fan & Fan motor KW given below are for guideline & actual

Dia / KW shall be as per manufacturer selection based on maximum 16 m/sec outlet

Axial Fan shall be AMCA certified for Air and Sound performance in accordance to

AMCA 210 and AMCA 300. Complete certified model appearing on AMCA web site

shall be accepted. Complete Fan shall be tested and approved by UL in accordance

with "Power Ventilators for

Smoke Control Systems" for Class- H Motor

Digitally signed by DIWAKAR

No. NSI Description Unit QTY NSI RATE SI Rate NSI AMOUNT

Manufacturer shall furnish AMCA Test Certificate for air & sound performance along

with UL fire test certificate (Latest) for each fan sourced from that particular factory.

b) 15,000 CFM (20mm st. pr, 1000 mm Dia Axial Fan, 3.7 KW, 1450 RPM Fan Motor,

14 Axial Flow Fan For PRESSURIZATION & MAKE-UP AIR

Supply, installation, testing and commissioning of ceiling mounted Tube Axial flow

fans with adjustable pitch blade, MS / GI long casing (2mm thick up to 800 mm dia

fan, 3 mm thick from 900 to 1250 mm dia & 4 mm thick above 1300 mm dia) , cast

aluminium alloy impeller complete with TEFC (Motor Efficiency IE3) Sq. Cage

Induction motor suitable for 415 volts ± 10%, 50Hz ± 3 %, three phase A.C supply

with support, mountings, vibration isolators, fire retardant flexible canvass

connector 150 mm deep (Inlet & Outlet as required), bird screen (Inlet & Outlet as

required) etc. & of following capacity. The complete fan along with motor shall be

suitable for 250 °C temperature rated for 2 hours. Fan outlet velocity shall be limited

to maximum of 16 m/sec. Fan & Fan motor KW given below are for guideline & actual

Dia / KW shall be as per manufacturer selection based on maximum 16 m/sec outlet

Axial Fan shall be AMCA certified for Air and Sound performance in accordance to

AMCA 210 and AMCA 300. Complete certified model appearing on AMCA web site

shall be accepted.

Complete Fan shall be tested and approved by UL in accordance with "Power

Ventilators for

Smoke Control Systems" for Class- F Motor.

Manufacturer shall furnish AMCA Test Certificate for air & sound performance along

fire test certificate (Latest) for each fan sourced from that particular factory.

a) 15,000 CFM (25mm st. pr, 900 mm Dia Axial Fan, 3.7 KW, 1450 RPM Fan Motor,

17) NSI Fan Section to for Exhaust / Supply

Digitally signed by DIWAKAR

No. NSI Description Unit QTY NSI RATE SI Rate NSI AMOUNT

Supply, installation, testing and commissioning of factory fabricated Double

Skinned fan section unit floor mounted type fabricated out of extruded

aluminium section with 0.6mm pre-plasticized / pre-coated Galvanised steel sheet

outside & 0.6 mm plain Galvanised steel sheet inside with blower, blower section

and blower motor TEFC (Motor Efficiency IE3) type suitable for operation on 415

volts ± 10%, 50 Hz ± 5% AC supply, belt drive package.

a) 2,500 CFM, 1 x 3750 mm Dia. Fan, 1 x 3.7 Kw Fan Motor, 35 mm St. Pressure, IE-3

motor For Exhaust

4,500 CFM, 1 x 450 mm Dia. Fan, 1 x 3.7 Kw Fan Motor, 35 mm St. Pressure, IE-3

motor For Exhaust

Grand Total of Sub Head ''A'' AC Machinery 8,13,549 -

Grand Total of Sub Head ''A'' AC Machinery 8,13,549 -

SUB HEAD - "B" : PLUMBING

SUB HEAD - "C" : DUCTING , GRILLES & INSULATION

20) DSR-2022 RECTENGULAR / SQUARE DUCTING (FACTORY FABRICATED)

Supplying, installation, balancing and commissioning of factory fabricated GSS

sheet metal rectangular/ round ducting complete with neoprene rubber

gaskets, elbows, splitter dampers, vanes, hangers, supports, bends, transitions,

reducers, end caps, collars etc as required complete in all respect in 227 DELHI

SCHEDULE OF RATES (E&M)-2025confirmation to IS : 655 and approved drawings

and specifications of following sheet thickness complete as required.

a) 30.11.1.1 24 G (Thickness 0.63mm sheet) SMT 75 1,191 - 89,325

c) 30.11.1.3 20 G (Thickness 1.00mm sheet) SMT 0 1,488 - -

d) 30.11.1.4 18 G (Thickness1.25mm sheet) SMT 0 2,013 - -

21) DSR-2025 RECTANGULAR / SQUARE DUCTING (SITE FABRICATED)

Digitally signed by DIWAKAR

No. NSI Description Unit QTY NSI RATE SI Rate NSI AMOUNT

Supplying, installation, balancing and commissioning of fabricated at site GSS

sheet metal rectangular/ round ducting complete with neoprene rubber gaskets,

elbows, splitter dampers, vanes, hangers, supports, bends, transitions, reducers, end

caps, collars etc as required complete in all respect in confirmation with IS : 655 and

approved drawings and specifications of following sheet thickness complete as

required. ncluding nut bolt fastner,sealent (neoprene gasket),access door etc.

a) 30.12.2.1 24 G (Thickness 0.63mm sheet) SMT 0 1,213 - -

b) 30.12.2.2 22 G (Thickness 0.80mm sheet) SMT 0 1,415 - -

c) 30.12.2.3 20 G (Thickness 1.00mm sheet) SMT 0 1,851 - -

d) 30.12.2.4 18 G (Thickness1.25mm sheet) SMT 0 2,063 - -

22) DSR-2025 VOLUME CONTROL DUCT DAMPER

a) 30.13 Supply, installation, testing and commissioning of GI volume control duct damper

complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as SMT 0 7,580 - -

per specifications.

23) DSR-2025 FIRE DAMPER

a) 30.14.1 Supply, installation, testing and commissioning of Motorized (ON-OFF Type) duct

mounted GI volume control damper with enthalpy sensor and necessary control wire

for integration within AHU room complete with neoprene rubber gaskets, nuts, bolts, SMT 0 18,377 - -

screws linkages, flanges etc in confirmation to SMACNA/IS and as per

specifications complete etc. as required.

25) DSR-2025 SUPPLY AIR GRILLES WITH VCD

a) 30.15 Supplying, Fixing, installation, testing and commissioning of powder coated extruded

aluminium Supply Air Grills with aluminium volume control dampers in confirmation SMT 4 9,623 - 38,492

to SMACNA/IS and as per specifications complete etc. as required.

26) DSR-2025 RETURN AIR GRILLES WITHOUT VCD

Digitally signed by DIWAKAR

No. NSI Description Unit QTY NSI RATE SI Rate NSI AMOUNT

a) 30.16 Supply & fixing of powder coated extruded aluminium Return Air Grills with louvers

but without volume control dampers as per specifications.

27) DSR-2025 SUPPLY AIR DIFFUSER WITH VCD

a) 30.17 Supplying, Fixing, installation, testing and commissioning of supply air diffusers of

powder coated aluminium with aluminium volume control dampers with anti smudge

ring & removable core in confirmation to SMACNA/IS and as per specifications

complete etc. as required.

28) DSR-2025 RETURN AIR DIFFUSER WITHOUT VCD

a) 30.18 Supplying, Fixing, installation, testing and commissioning of Return air diffusers of

powder coated aluminium without volume control dampers with anti smudge ring &

removable core in confirmation to SMACNA/IS and as per specifications complete

etc. as required.

29) FRESH / EXHAUST LOUVER WITH BIRD SCREEN

a) NSI Supplying & fixing of 18 G thick Aluminium extruded powder coated Fresh /

Exhaust air weather protected louvers with bird screen type (with Aluminium

frames if required) for ventilation with 12G GI wire mesh as per specification and

sizes will be as per tender drawing mentioned.

30) DSR-2025 FLEXIBLE DUCT

Supply, installation, testing & commissioning of thermal insulated flexible duct of

following sizes duly supported at regular interval as per site requirement etc.

complete as required as per specifications.

INSULATION WORKS

31) 30.23 DUCT INSULATION (NITRILE RUBBER)

Digitally signed by DIWAKAR

No. NSI Description Unit QTY NSI RATE SI Rate NSI AMOUNT

Supplying and fixing of following thickness duly laminated aluminium foil of mat finish

closed cell Nitrile rubber (Class"O") insulation on existing duct after applying suitable

adhesive for Nitrile rubber. Thejoints shall be 50 mm wide and 3 mm thick self

adhesive nitrile rubber tape insulation complete as per specifications and as

30.23.1 19 mm thick for Supply / Return Air Duct SMT 0 810 - -

30.23.2 25 mm thick for Supply Air Duct exposed SMT 0 1,033 - -

32) DSR-2025 DUCT ACOUSTIC INSULATION

30.21 Supplying and fixing of acoustic lining of supply air duct and plenum with 25 mm thick

resin bonded glass wool having density of 32 kg/m³, with 25 mm X 25 mm

GI section of 1.25 mm thick, at 600 mm centre to 229 DELHI SCHEDULE OF RATES

(E&M)-2025centre covered with Reinforced Plastic tissue paper and 0.5 mm thick SMT 0 890 - -

perforated aluminium sheet fixed to inside surface of ducts with cadmium plated nuts,

bolts, stick pins, CPRX compound in confirmation to SMACNA/IS and as per

specifications complete etc. as required.

33) DSR-2025 ACOUSTIC INSULATION OF AHU ROOM

30.22 Supplying, fixing acoustic lining on wall and ceiling of AHU rooms with 50mm thick,

density 32 kg/cu.m resin bonded glass fiber insulation friction fixed in 610mm x

610 mm frame work made of 25X50X50X50X25 mm made out of 0.6mm thick GI

sheet U shaped channel and covered with reinforced fiber glass tissue and

finished with 0.80 mm perforated aluminium sheet etc. complete as required and as

per specifications.

UNDED DECK INSULATION

34) NSI Supplying & fixing of under deck insulation with 75 mm thick XPS with overlapping

edge of R Value per inch as 5.15 with the help of woodscrews, rowl plug & dash

fasteners, washers etc complying with the process and specification as given in

tender specification. It shall conform to DBR & NIIT specification. Note:- Overdeck SMT 700 905 - 6,33,500 -

insulation shall be done by civil agency. If it is partly missed anywhere then

Underdeck insulation shall be considered and applied. The quantity given above is

just for reference.

Digitally signed by DIWAKAR

No. NSI Description Unit QTY NSI RATE SI Rate NSI AMOUNT

Grand Total of Sub Head ''C'' AC AIR DISTRIBUTION 6,33,500 2,56,607

Grand Total of Sub Head ''C'' AC AIR DISTRIBUTION 6,33,500 2,56,607

SUB HEAD - "D" : ELECTRICAL PANEL & DISTRIBUTION

36) NSI Panel-1 (Terrace Floor / pressurization panel)

Incoming(1 Nos):

125 Amp 4-Pole MCCB, 50kA with thermal magnetic based O/L, S/C and E/F

Multifunction meter and 250/5A, CL-1, 10VA CTs and 2A control MCB.

Sets of phase indicating lamps with 2A control MCBs.

400A, TPN Aluminium, colour coded bus bars suitable for 415V, 50Hz. (After

(a) 6 Nos-3 Pole MCBs 25 A

(d) 2 Nos-4 Pole MCCBs 63 A Spare Set 1.00 93,595 - 93,595 -

36a) NSI Supply of Starter panels ((Terrace Ventilation / pressurization panel-2B):

Supply, installation, testing & commissioning of the following starters in a sheet

metal enclosure complete as required and as per site conditions:

Digitally signed by DIWAKAR

No. NSI Description Unit QTY NSI RATE SI Rate NSI AMOUNT

DOL/Star Delta Starter of following rating with Auto/ Manual selector switch,

MPCB/MCCB, over load relay, single phasing preventor, ON/OFF/ Trip indication

lamps, Ammeters with CTs, ON/OFF push Buttons, contractor and suitable No. of

Potential free contacts for remote / local operations, indication, interlocking with

Fire Alarm panel and Building Management system. (Starter shall have

MPCB/MCCB in the incomer as per type -2 coordination for fuseless type feeders.)

upto 3.7 kW DOL Starter Nos. 6.00 25,919 - 1,55,514 -

5.6 kW DOL Starter Nos. 0.00 28,798 - - -

7.5 kW Star Delta Starter Nos. 0.00 43,198 - - -

1) Provision for VFD shall be provided in the starter panels.

37) NSI Power & Control Cabling

A) Supply, laying, testing and commissioning of power and control cabling as per

specification given in the tender. Power cabling of XLPE insulated Aluminium

conductor armoured cables of 1.1 KV Grade including cable end termination with

brass compression glands & aluminium lugs etc as per specification. It shall conform

to DBR & NIIT specification.

a) i) For VRV ODU

1 x 3 C x 25 Sq. mm alluminium cable RMT. 0 1,227 - - -

b) viii) For Fan Motor - Up to 3.70 Kw

c) ix) For Fan Motor - Up to 5.6 Kw

Digitally signed by DIWAKAR

No. NSI Description Unit QTY NSI RATE SI Rate NSI AMOUNT

d) x) For Fan Motor - 7.46 Kw

e) xi) For Fan Motor - 9.33 / 11.19 Kw

f) xii) For AHU Fan Motor - 15.00 / 18.65 Kw

g) xiii) For HRW & Humidifier of 1.50 / 3.00 Kw

h) xiv) For main Building panel to floor Panel

xv) For Single Phase Equipment (Note: All single phase equipment power

o) supply will be catered by AC socket Provided by the electrical contractor)

1 x 3C x 1.5 Sq. mm Copper Flexible Cable RMT. 0 95 - - -

1 x 3C x 4.0 Sq. mm Copper Flexible Cable RMT. 0 279 - - -

B) Control cabling (PVC insulated Copper conductor of 1.1 KV Grade armoured

p) cable). It shall conform to DBR & NIIT specification.

Digitally signed by DIWAKAR

No. NSI Description Unit QTY NSI RATE SI Rate NSI AMOUNT

q) C) Transmission & Control Wiring For VRV / VAV System

Providing & fixing of control cum trans-mission wiring of copper between indoor

and out door unit in 25 mm PVC Conduit. It shall conform to DBR & NIIT

38) DSR-2022 Earthing Strip / Wires as per specs.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections

etc. as required.

iv) Supply & laying of 6 SWG GI wire or in recess for loop earthing as required. It

shall conform to DBR & NIIT specification.

v) Rubber mat 1000 mm. Wide to withstand 1.1 KV dielectric strength as per latest IS

15652-2006. It shall conform to DBR & NIIT specification.

39) DSR-2022 Cable Tray

Supplying and installing following size of perforated Hot Dipped Galvanised Iron

cable tray (Galvanisation thickness not less than 50 microns) with perforation

not more than 17.5%, in convenient sections, joined 26 DELHI SCHEDULE OF

RATES (E&M)-2025 with connectors, suspended from the ceiling with two

numbers GI Suspenders i/c base of suitable size GI angle, GI bolts & nuts, fastner

etc as required.

Digitally signed by DIWAKAR

No. NSI Description Unit QTY NSI RATE SI Rate NSI AMOUNT

4.6.1 100 mm wide x 50 mm depth x 1.6 mm thickness. RMT. 0 - 754 - -

4.6.2 150 mm wide x 50 mm depth x 1.6 mm thickness. RMT. 200 - 803 - 1,60,600

4.6.4 300 mm wide x 50 mm depth x 1.6 mm thickness. RMT. 0 - 1062 - -

4.6.6 450 mm wide x 50 mm depth x 2.0 mm thickness. RMT. 0 - 1439 - -

4.6.7 600 mm wide x 50 mm depth x 2.0 mm thickness. RMT. 0 - 1925 - -

40) DSR-2025 Single Phase MCB for FCU / Fan / VRV IDU

Supply, installation, testing and commissioning of Single Phase MCB of following

capacities. It shall conform to DBR & NIIT specification.

Power supply to the main building HVAC panel shall be scope in the electircal

All single phase Indoor unit power supply will be connected through socket

provided by the electrical power provision

The AC contractor shall provide fire shunt relay contact in his panel wherever

necessary along with auto / manual mode selector switch in the outgoing

feeder to take fire input signal (Potential Free Contact). Cost shall be included

in the panel price quoted by him.

Grand Total of Sub Head ''D'' AC Electrical 3,58,857 1,77,400

Grand Total of Sub Head ''D'' AC Electrical 3,58,857 1,77,400

Digitally signed by DIWAKAR

Sub:- Signages Quotation

PROPOSED CONSTRUCTION OF DE-NONILI SCHOOL BUILDING FOR CTPS TOWNSHIP AT CHANDRAPURA,

S.No. Description Unit Qty RATE Amount

# EXTERNAL SIGNAGES

1 MAIN GATE SIGNAGES

Providing and fixing External Signage's made of SS 304 (brush finish) 1mm thk.sheet for Logo and letters with raising(letter

depth of 50mm). Including all fittings, accessories, fixtures, fabrication.The signage will be front illuminated/hollow

illuminated either back or front of the signage to be made of 3.5 mm thick acrylic. 3M/Avery/LG Cast vinyl 90 micron and 5

7 sq meter Nos. 0 327647 0

years warrenty for desired colour with OSRAM make or equivalent/as per approved make list LEDS and IP 67 Grade

OSRAM powersupply with 5 years warrenty fixed on the wall with necessary fixtures. Height of a letter is not less than 400

mm. (IN HINDI + ENGLISH + LOGO)

2 Entry/ Exit Signage - Wall / Surface Mounted IN/OUT/NO ENTRY/ NO EXIT)

Providing and fixing IN/OUT lit Mounted Exterior Signage sides is to be made of 80 mm width, extruded alloy 6063 of

having no screws visible outside. duly anodized 18-20 microns champagne/ brown/ silver finish with in built in provision to

received the sign face panel in 4.5mm Acrylic on front and having provoison of hold the LED Modules . Sign face is to be

made of graphic plotter cut vinyl 90 micron and 5 year warrenty as per graphic pasted over 4.5mm thick white transluent 600 450 Nos. 2 10868 21736

acrylic. The panel should be made easily openable for maintinace point of view.

Illumination:- The lighting for panel shall be achieved through OSRAM make or equivalent/as per approved make listLEDs

and IP 67 Grade OSRAM powersupply.

3 CAMPUS DIRECTIONAL TOTEM SIGNAGE

Providing and fixing Signage side to be made of 80 mm width modular extrude alloy 6063 of brand 247 sign/cosign/vista

system having no screw visible outside powder coated to 40-50 microns with in built in provision to receive the sign face

panel in acrylic/ACP on both side. Sign face B is to made of 10 thick Acrylic with 2 mm thick laser cut acrylic letters on it.

Internal Frame is to be made of 50x50x3mm MS Section with base plate of thickness 10mm. The panel should be made easily 800 2400 Nos. 0 60920 0

openable for maintaince point of view. 18mm thick grounting bolt for holding base palte of totem.

FOUNDATION WILL BE PROVIDED BY CLIENT.

4 Traffic regulatory Signage ( Drop off/ Speed Limit / No Horn/ BASEMENT Entry/Exit)

Digitally signed by DIWAKAR

Providing and fixing Traffic Regulaotry Non lit Totem Signage, made from Following

A)POST :- Signage is to be made oF 100x100 mm 1800 mm High MS pole, Base Plate of size 250x250mm of thickness

10mm is to be used. Duly powder coated 50 microns in the desired colour.

B) Panel-1 :-Panel size 400X110X1200mm is to be made of 50x50x2mm internal MS frame duly powder coated to 40-50

microns with ACP 4 mm thick, 0.5 mm aluminium foil, 3M / AVERY Prismatic Retro reflective sheet and approved color 600 1900 Nos. 0 41473 0

Overlay film on top having desired text and pictographs on both side post.

C) Panel-2 :- Panel size 600X600 Sq/round with ACP 4 mm thick, 0.5 mm aluminium foil, 3M / AVERY Prismatic Retro

reflective sheet and approved color Overlay film on top having desired text and pictographs.

FOUNDATION WILL BE PROVIDED BY CLIENT.

INTERNAL SIGNAGES

5 BLOCK NAME SIGNAGES (NON - ILLUMINATED)

Providing and fixing External Signage's made of SS 304 (brush finish) 1mm thk.sheet for Logo and letters with raising(letter

depth of 50mm). Including all fittings, accessories, fixtures, fabrication.The signage will be front illuminated/hollow

illuminated either back or front of the signage to be made of 3.5 mm thick acrylic. 3M/Avery/LG Cast vinyl 90 micron and 5

years warrenty for desired colour with OSRAM make or equivalent/as per approved make list LEDS and IP 67 Grade

OSRAM powersupply with 5 years warrenty fixed on the wall with necessary fixtures. Height of a letter is not less than 400

a LAB, MULTIPURPOSE HALL, CLASSROOM 8.5 sq meter Nos. 4 397858 1591432

6 GENERAL INSTRUCTION SIGNAGES

Signage to be made of stainless steel sheet of 1 mm thick 304 grade brush finish including engraving/ etching of letters of

required size filled with colour as desired by engineer,fixing with ss screws on walls. signages to be bilingual/trilingual

b No Littering 300 400 Nos. 4 3064 12256

d Instructional Signages 600 900 Nos. 1 13783 13783

Digitally signed by DIWAKAR

7 AREA IDENTIFICATION SIGNAGES

Supply & installation Signage Made Of Base 3 MM Beton silveri Beton whitel Swiss snow finish ACP panel Box having

6063 Alloy profiles to house the edge of ACP with in groove. Profile size 18X38 mm @edges and to be eprotuded by

5mmx3mm beyond side surface from front side to make teh surface appeared recessed. Powder coated I Anodised as per

approved shade, Fascia 3mm acrylic sheet to be Stuck on base ACP Sheet in staggered manner before fixing of signage then

Content CNC Cut Acrylic 2 mm thick fixed on signage facia. signage to be mounted using clamps at backside of profile. teh

sheets and content to be duly CNC cut with neat and clean polised edges. Profiles make to be 247SIGN/ Tata Elexi / Glo-

lite.or equivalent/as per approved make list

a Room Identification/ Room Name 300 250 Nos. 3 2986 8958

b Room No./Flat No. 150 100 Nos. 3 1005 3015

c Department Name Identification 300 500 Nos. 3 5108 15324

d Washroom Mounted 250 200 Nos. 3 2238 6714

g Floor Level Lift 300 500 Nos. 3 5108 15324

8 AREA IDENTICATION WAYFINDER SIGNAGES

Supply & installation Signage Made Of Frame work of 25 mm x 38 mm 6063 Alloy profiles (PVDF Coated) having (Roman

Ogee) Edge and panel made of 4 MM exterior grade PVDF coated ACP. Frame to house the edge of ACP with in groove.

Content CNC Cut Acrylic 2 mm thick fixed on signage facia. signage to be mounted using clamps at backside of profile, No

screws to be visible. Profiles make to be 247SIGN/ Tata Elexi / Glo-lite.or equivalent/as per approved make list

a Washroom wall projected (Double sided) 300 210 Nos. 4 4317 17268

b Wayfinding signages (Double sided) 1200 250 Nos. 1 16747 16747

c Reception Sign (Single sided) 900 175 Nos. 4 6043 24172

d Waiting area (Single sided) 900 175 Nos. 2 6043 12086

9 Wayfinder sign for basement

Double sided signage will be fabricated using 13+13 mm twin thick ultra slim edge modular aluminium extruded profile with

approved ACP as base duly fixed over on both side and type IV reflective vinyl duly digitally cut and pasted on ACP panels 1050 200 Nos. 4 8738 34952

on both side. Signage will be hanged using SS csble/ SS chain with fastners.

10 Entry Area Identification Signs for Ramp

Single side signage will be fabricated using 13-14 mm thick ultra slim edge modular aluminium extruded profile with

approved ACP as base duly fixed and type IV Avery/3M reflective vinyl duly digitally cut and pasted on ACP panels.

11 FIRE EVACUATION PHOTOLUMINICENT SIGNAGES

Emergency Evacuation Signage :‐ Round Corner signages with radius 8 to 12 mm, made of 2 mm Rigid PVC sheet with

premium photoluminescent of illumination upto minimum 4 hours. With UV printing for Graphic and text. Adhering to latest

NBC Standards. Mounted using SS screws OR 3M VHB tape, as per directions of Engineer-in-charge.

Digitally signed by DIWAKAR

b Stair direction at landing 300 125 Nos. 4 694 2776

c stair floor level Indicator 382 382 Nos. 4 2706 10824

d Fire safety disclaimer 300 300 Nos. 4 1675 6700

e Fire hose cabinet 150 200 Nos. 4 558 2232

f Fire alarm 150 200 Nos. 4 558 2232

g Fire extinguisher 150 200 Nos. 4 558 2232

12 Evacuation Route Identification

Sandwich Acrylic frame work of 5 mm + 5mm thickness. Signages made of premium photo luminescent of illumination upto

minimum 4 hours. With UV printing for Graphic and text. Adhering to latest NBC Standards. Mounted using SS Spacers 18 15 450 Nos. 2 7515 15030

mm x 25 mm, as per directions of engineer incharge. Signages to be bilingual /trilingual language.

13 Poster Frame

Poster frame made of alloy 6063 having copper/bronze anodizing, clip on arrangement for easy change of insert. Use 2mm

clear acrylic as a protection layer in the front. 600 900 Nos. 3 9148 27444

BRAND / MAKE- 247SIGN/ COSIGN/ VISTA System.or equivalent/as per approved make list

G.Total 2276267

Digitally signed by DIWAKAR