Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
₹2.9 L
EMD Value
₹5,707
Closing Date
27 Sept 2021, 3:30 pmClosed
Executive Engineer
IWD, IIT Kanpur
Modification and renovation of electrical installation of vacate House No 2061 2062 2064 2067 and 2069 2076 2083 Type II
2021_IITK_649079_1
57/IWD/Ed/383
Limited
Electrical Works
Item Rate
60 days
IIT Kanpur
As per tender
3 documents required · 3 mandatory
₹0
₹5,707
Yes
30 Sept 2021
20 Sept 2021
28 Sept 2021
20 Sept 2021
27 Sept 2021
20 Sept 2021
20 Sept 2021 - 24 Sept 2021
Amount
Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required.
Group 'A'
Supplying & drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel / PVC conduit as reqd.
1 x 1.5 Sq.mm..
3 x 1.5 Sq.mm..
3 x 4 Sq.mm..
Supplying and drawing telephone cable of 2 pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
Supply, fixing, following modular type switch / socket on existing modular plate & switch box including connectins but excluding modular plate etc. as reqd.
5/6 Amp switch
2 way 5/6 amps switch
15/16 Amp. switch
3 Pin 5/6 Amp. socket outlet
6 Pin 15/16 Amp. socket outlet.
Telephone socket outlet
Bell Push
Fan regulator socket type rotary step
Blanking plate
S/F following modular base & cover plate on existing modular metal boxes etc. as reqd.
1 or 2 module
3 module
4 module
6 module
8 module
12 module
Supplying and fixing 3 pin, 5 amp. Ceiling rose on the existing junction box/ wooden block including connection etc. as reqd.
Supplying and fixing brass batten/ angle holder including connection etc. as required.
Supplying and fixing call bell/ buzzer suitable for single phase,230 V, complete as required.
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).
12-way , Double door
Supplying and fixing 5 amps to 32 amps rating, 240 volts, 'C' series, MCB suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as reqd.
Single Pole
S & F following rating double pole (single phase & neutral) 240 volts RCCB (ELCB), having sensivity current up to 300 mA in the existing MCB DB complete with connection,testing & commissioning etc as reqd.
Supplying and fixing following size/ surface mounting plastic box as required.make havells OR equivalent approved make.
1/2 module
3 module
4 module
6 module
8 module
12module
Laying UTP cable enhanced cat 5/cat 6 cable in existing steel conduit pipe/GI pipe/ raceway / RCC pipe as reqd. the cost shall also include numbering of networking wire from room to rack as reqd. (wire will be supplied by dept)
Fixing of RJ-45 modular box with cover plate or I/o box for internet on surface/ recessed cutting the wall making good the same as required. ( box and cover plate will be supplied by dept.)
S & F wood board of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in the front etc as reqd.
100 mm x 100 mm
Providing and fixing following sizes of PVC casing and capping on surface as reqd.
Providing and fixing casing and capping in place of defective and dameged wood batten including dismentling & relaying of wire as required complet.
Dismentaling and refixing of wood board of any size on surface or in recessed etc as reqd.
Dismantling damaged DB/TPN Switches/ loose wire boxes along with all accessories and depositing the same in the store as reqd.
S & F 3 mm thick phenolic laminated sheet on existing board with brass screw & cup washer etc as reqd.
Dismantling and refixing of switch / socket /regulator I/c cleaning, connecting, commissioning etc as reqd.
Supplying fiixing erection of wall bracket/ceiling fittings of all sizes and shapes containing upto two GLS lamps per fitting complete with all acessories includng connecting etc as requred (without Lamp)
bulkhead for 100w gls LAMP
Supply, Installation, testing & commissioning of AC ceiling fan of following sweep 220 volts without regulator I/c wiring the down rods of standard length up to 30 cm with 1.5 sq.mm. PVC insulated copper conductor single core cable etc as reqd.
V.S ENTERPRISES
Krishna Electricals
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .