Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.7 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹35.9 L+₹60,695 (1.72%)Rejected-Finance | L2 | Rejected-Finance Being other than L1 | |
| 3 | L3₹36.3 L+₹1.0 L (2.89%)Rejected-Finance | L3 | Rejected-Finance Being other than L1 | |
| 4 | L4₹41.0 L+₹5.7 L (16.1%)Rejected-Finance | L4 | Rejected-Finance Being other than L1 | |
| 5 | L5₹44.5 L+₹9.2 L (26.1%)Rejected-Finance | L5 | Rejected-Finance Being other than L1 |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
29 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 862 EWS
GE 862 EWS PIN-913862 C/o 56 APO
Comprehensive repairs to certain bldgs in south zone of AGE B/R Dett-A under GE 862 EWS
2022_MES_527141_1
GER-18/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE 862 EWS
please refer tender documents
9 documents required · 9 mandatory
₹500
GE 862 EWS
₹88,000
Yes
8 Jul 2022
28 May 2022
1 Jul 2022
28 May 2022
29 Jun 2022
11 Jun 2022
Amount
Taking down chowkhats or frames (without taking off shutters from the frames) n.exc 1.5 Sqm each and removing to store complete all as specified and directed.
Taking down chowkhats or frames exc 1.5 Sqm and n.exc 4 Sqm each (without taking off shutters from the frames) and removing to store complete all as specified and directed.
Taking down shutters of any description area exc 1 sqm but n.exc 2 sqm each and and removing to store complete all as specified and directed.
Taking down shutters of any description area exc 2 sqm and removing to store complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15 cm thickness below or above the ground level complete all as specified and directed.
Taking down cement plaster, any description on brick or stone or cement concrete surfaces including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
Dismantling of timber scantling 40 Sqcm and over in section, in any position as in unframed work complete all as specified and directed.
M&L for plain cement concrete type B-1 , 1:2:4 ( using 20mm graded stone aggregate) as in coping, benching, hold fasts, water troughs, bed block and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.
M&L for framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290, Gde E-165 complete all as specified and directed.
S&F for steel ventilators with top hung shutter including hinges, steel peg stay complete all as specified and directed
S&F for factory made MS tubular Box type window (double rebate and double shutter) of MS rolled steel section conforming to IS-1038 and shall be ISI marked manufactured by ISI approved manufacturer, openable frames shall be fabricated of sections as approved by Engr-in-Charge, corner welded to form a solid fused welded joint, handles shall be of z section welded with openable frame box steel section used in outer frame, shutter frame and central frame shall be ERW secton of 16 gauge with fixing lugs to be fixed as per provision of IS-1038 except that top lugs shall not be provided , all shutters of windows shall be provided with 4 Nos friction free hinges, 2 Nos 75 mm tower bolts to each leaf of window one at top and one at bottom welded on 3 mm thick steel sheet piece of suitable size which shall be in turn welded to z section of steel window to provide suitable arrangement of using tower bolt. Glazed, gauzed window , mild steel casement stays 300 mm with hinged joint and two plates with studs complete all as specified with all fittings and fixtures without glazing bars including 3mm thick sheet glass ordinary quality and GI wire mesh of 0.56mm nominal dia and average width of aperture 1.18 mm etc complete all as specified and directed.
S&F for pressed steel door frame of size 125x60 mm with one or more rebates incl necessary fixing lugs, hinges, lock and strike plate etc including back filling to chowkhats in PCC 1:3:6 type C-0 using 12.5mm graded stone agregate complete all as specified and directed.
S&F for pressed steel frame for doors with one or more rebates of size 105x60mm including necessary fixing, lugs, hinges, lock and strike plate etc including back filling of chowkhats with PCC 1:3:6 type C-0 using 12.5mm graded stone agregate complete all as specified and directed.
S&F for factory made 2nd class hard wood 35 mm thick plain framed panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm venered particle board with commercial venering on both faces. The size of rail and stile as per IS : 1003 (part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F for factory made 35 mm thick 2nd class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed.
S&F for 300 mm MS ordinary rat tail spring including roller and roller plate complete all as specified and directed.
S&F for aluminium anodized barrel tower bolts 150 mm long of extruded section complete all as specified and directed.
S&F for aluminium alloy handles size 150 mm fabricated type anodised complete all as specified and directed.
S&F for Butt hinges 100 mm medium weight cold rolled mild steel complete all as specified and directed
S&F for 250 mm long mild steel sliding door bolt plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.
S&F for Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with tinned tacks, or galvanised wire staples complete as in repair all as specified and directed.
S&F for 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n . exc 0.50 sqm in each pane complete all as specified and directed.
S&F for 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n . exc 0.50 sqm in each pane complete after hacking out old broken glass all as specified and directed.
S&F for 4mm thick designer ceiling board in ceiling fixed with screw as per manufacturers instructions , laid over and including hot dipped galvanised iron in post grid with 24mm wide T section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33 mm thick galvanised steel sheet of size 24 x 32 x 300 mm spaced at 12 mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4 mm dia to be fixed by approved rawl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greter than 450 mm from adjustacent wall flush fittings of 1200 mm long screws Tee with (double stiching) to interlocked between main runners at 600 mm centre to centre from 1200 x 600 mm modules cross tee longer than 600 mm modules to be formed by fittings 600 mm long cross tee, tee perimeter wall angle shall be of 0.45 mm thick galvanised steel of size 19 x 19 mm and 300 mm long of white colour all as per insturctions after dismantling of ceiling board etc complete all as specified and directed.
S&F for solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square complete all as specified and directed.
S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M. S . frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing mentioned in SSR Part-II 2010 complete all as specified and directed.
M&L for 25mm thick PCC type B-1, 1:2:4 (using 20mm graded stone aggregate) as in sub base of floor complete all as specified and directed.
M&L for 50mm thick PCC type C-1, 1:3:6 (using 20mm graded stone aggregate) as in plinth protection laid in slope 1:12 from outer edge of the wall, finished even and fair, laid in alternate bays including providing 6mm wide joints throughtout thickness of plinth protection in concrete bays and in between walling and plinth protection, joints filled mastic filling comprising of one part of heated bituminous VG 20 and 3 parts of sand( all by weight) complete all as specified and directed.
M&L for 40mm thick PCC type B-1, 1:2:4 (using 20mm graded stone aggregate) as in flooring finished even and smooth without using extra cement complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) Square/rectangular, area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) Square/rectangular, area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm on vertical surfaces such as skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10mm thick backing layer of cement plaster in cement mortar (1:4) complete all as specified and as directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) Square/rectangular, area of each tile exceeding 0.06 sqm but n.exc 0.11 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.
M&L for vitrified tiles (light shade) of size 600x 600x 10mm thick (premium quality) as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15 mm thick cement plaster in cement mortar (1:4) complete all as specified and as directed.
M&L for vitrified tiles (light shade) of size 600x 600x 10mm thick (premium quality) as in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick backing layer of cement plaster in cement mortar (1:3) complete all as specified and as directed.
M&L for glazed ceramic coloured tiles of size 300x450x7mm thick, (premium quality) on vertical surface such as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10 mm thick backing layer of cement plaster in cement mortar (1:3) complete all as specified and as directed.
S&F for Rotational moulded polythylene water storage tank (ISI marked multilayer) with float valve, plastic lid cover, double layered, cylindrical vertical with closed top, hoisted and fixed in position of capacity 500 ltrs including dismantling old unserviceable tank and making connections inlcuding suitable GI wash out, over flow, nipple and including 15mm bore ball brass valve with union (two nos each) screwed for iron pipe and fixed complete all as specifed and directed.
S&F for Rotational moulded polythylene water storage tank (ISI marked multilayer) with float valve, plastic lid cover, double layered, cylindrical vertical with closed top, hoisted and fixed in position of capacity 1000 ltrs including dismantling old unserviceable tank and making connections inlcuding suitable GI wash out, over flow, nipple and including 15mm bore ball brass valve with union (two nos each) screwed for iron pipe and fixed complete all as specifed and directed.
M&L for 15 mm bore galvanized iron GI tubing medium grade with all fittings such as bends, socket, Tee, Elbow, union, Nipple, short pieces and fixed to walls, ceilings or laid in floors after taking down GI tubing 15 mm bore and connections including cleaning for refixing or removal complete all as specifed and directed.
M&L for 20 mm bore galvanized iron GI tubing medium grade with all fittings such as bends, socket, Tee, Elbow, union, Nipple, short pieces and fixed to walls, ceilings or laid in floors after taking down GI tubing 20 mm bore and connections including cleaning for refixing or removal complete all as specifed and directed.
S&F for Grating doom 100 mm of PTMT (Min Weight 40 Gms) with waste hole complete as in repair all as specifed and directed.
S&F for Brass chromium plated shower rose 125mm with or without swivel joints, any size inlcuding fixing to steel pipe or union complete as in repair all as specified and directed.
S&F for Brass chromium plated tubular towel rail 20 mm dia "D" type 60 cm long between flange aluminium anodised complete as in repair all as specifed and directed.
S&F for 15mm dia chromium plated (fancy type) bib tap cast copper alloy with crutch or butterfly handle, screwed for iron pipe complete as in repair all as specified and directed.
S&F for 15mm bore pillar tap fancy type cast copper alloy with chromium plated screwed down or high pressure with or without lettered hot or cold with long screwed shank and fly nuts for iron pipe fixed complete as in repair all as specified and directed.
S&F for 15mm bore chromium plated (fancy type) stop valve, cast copper alloy, screwed for high pressure with crutch or butterfly handle, screwed both ends complete as in repair all as specified and directed.
S&F for 15mm dia chromium plated (fancy type) stop valve (Concealed type) of long shank and cup, cast copper alloy, screwed for high pressure with crutch or butterfly handle, screwed complete as in repair all as specified and directed.
Taking down of aluminium doors of (frame and shutters) any description including all fittingss and fixtures exc 1.5 sqm but n exc 4 Sqm complete all as specified and directed.
M&L for anodised aluminium (powder coated) frame for doors, windows ventilators with one or more rebates including joining cleat for fixing including powder coating (minimum thikcness of powder coating 50 micron) etc. complete all as specified.
S&F for anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, mortice lock, 1 Nos floor door stopper, anodised aluminium snap beading, screws etc. complete all as specified and directed.
M&L for anodised aluminium (powder coated) door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, mortice lock, 1 Nos floor door stopper, anodised aluminium snap beading, screws etc. (minimum thikcness of powder coating 50 micron) etc. complete all as specified and directed.
M&L for sheet glass, ordinary quality, 5.5mm thick fixed to aluminium doors with aluminium and rubber beading in square exc. 0.5 Sq m each pane, complete all as specified.
M&L for 12mm thick partical board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to aluminium frame work (fittings and fixtures are included in shutter item) complete all as specified and directed.
M&L for door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg Aluminium (extruded section) body complete as in repair all as specified and directed.
S&F for brass mortice lock vertical type 100mm long with 4 levers complete all as specfied and directed.
S&F for vitreous China water closet (squatt pan) Orrisa pattern 580x440 mm size pan, white, with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to flushing cistern/pipe complete all as specified and directed.
S&F for PVC low level flushing cistern 10 ltrs capacity white with inlet ball valve, float valve and handle including providing & fixing MS angle iron brackets, PVC flush pipe complete all as specified and as directed.
S&F for brass chromium plated nozzle jet sutiable for EWC with all fixing arrangement complete as in repair all as specified and directed.
S&F for Brass chromium plated Health faucet (ABS Body) for EWC suitable for 15mm dia pipe with 1.25m long flexible tube at ABS wall hook with all fittings complete as in repair all as specified and directed.
Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.
M&L for Brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius, built in cement mortar (1:6) complete all as specified and directed.
M&L for brick work with sub class 'B' bricks,(except bricks, using old unserviceable brick after cleaning), old size, straight or curved on plan exc 6 m mean radius, built in cement mortar (1:6) complete all as specified and directed.
M&L for stone walling of random rubble masonry, uncoursed, well bonded, bedded and soilidly hearted, built in cement mortar (1:6), complete all as specified and directed.
M&L for stone walling of random rubble masonry (except stones, using old unserviceable stone after cleaning), uncoursed, well bonded, bedded and soilidly hearted, built in cement mortar (1:6), complete all as specified and directed.
M&L for extra over stone walling of any type of stone for hammer dressing to face stones and dressing of face beds with maximum depression on face from straight edge held against the dressed surface n exc 20 mm and joints, as specified, of random rubble walling, uncoursed or brought upto courses complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar (1:6) on other than fair faces of brick wall surface, finished even and smooth without using extra cement (internal surfaces) complete all as specifed and directed.
M&L for rendering 20mm thick in cement mortar (1:6) on stone masonry surface, finished even and smooth without using extra cement complete all as specifed and directed.
M&L for rendering 15 mm thick in cement mortar (1:4) on stone masonry surface finished even and smooth without using extra cement complete all as specified directed.
M&L for rendering 15 mm thick in cement mortar (1:4) on brick work or concrete finished even and smooth with out using extra cement (external surfaces) complete all as specified directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer and a coat of Birla wall care putty 3mm thick complete all as specified and directed.
M&L for preparation of old decorated plastered or un plastered surfaces on walls and applyingone coat of white wash complete all as specified and as directed by GE.
M&L for preparation of new or previously untreated wood or wood based surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preparation of previously primed steel or iron surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of Synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
M&L for preparation of new or previously untreated steel surfaces of any description n exc 10 cm width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F for vitreous China bowl urinal flat back of size 465x355x265 mm white (minimum), with grating and union for discharge pipe excluding flushing cistern and incluidng flush type and waste pipe complete as in repair all as specified and directed.
S&F for viterous China WHB, white, flat back, size 550x400mm including waste coupling, waste pipe and brackets complete as in repair all as specifed and directed.
M&L for Machine cut kota stone slab(mirror polished) flooring 18-20mm thick in floors and jointed with grey cement slurry mixed with pigment to match the shade of the slab including machine cutting to make it square or rectangular, rubbing and cutting and polishing to achieve mirror finish, laid over and including screed bed or bedding layer of 20 mm thick in cement mortar (1:4) after dismantling/demolition of old unserviceable kota stone of any size complete all as specified and directed.
S&F for drapery rod (Curtain rod) of wooden finishes of 25mm dia fency type complete and hanging hooks/brackets/end caps of length 1.5 mtr to 1.8 each complete as in repair all as specifed and directed.
Note:- The contract sum arrived after deduction of amount of Sch of credit as listed in tender Documents.
M/S Darshan Kumar
CHAND CONSTRUCTION CO
M/S SURINDER PAL
M/s Anil Engineers & Builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .