Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹84.1 LAccepted-Finance | L1 | Accepted-Finance L1 Bidder | |
| 2 | L2₹84.7 L+₹52,368 (0.62%)Accepted-Finance | L2 | Accepted-Finance L2 Bidder |
Tender Value
₹84.3 L
EMD Value
₹52,500
Closing Date
5 Mar 2025, 12:30 pmClosed
Inspector
Arulmigu Kailasanathar Thirukoil, Thenkazhani village, Vembakkam Taluk, Tiruvannamalai District
Repairs and Renovation of Arulmigu Kailasanathar Thirukoil, at Thenkazhani village in Vembakkam Taluk of Tiruvannamalai District
2025_HRCE_525039_1
29/2024-2025/2
Open Tender
Civil Works
Lump-sum
Thenkazhani village in Vembakkam Taluk
Please refer Tender documents.
7 documents required · 7 mandatory
₹0
₹52,500
5 Mar 2025
14 Feb 2025
5 Mar 2025
14 Feb 2025
5 Mar 2025
14 Feb 2025
Amount
Providing Scaffolding charges for Vimanams and Gopurams with casurina posts coconut or palm trees wherever necessary for main, form work and providing with net lawn/PVC mesh coverings, providing ladder arrangements, country wood plank for working, inspection etc. complete, hire charges only for erection, maintenance and removing the same on completion of the work. etc complete complying with standard specification and as directed by departmental officers. (TNBP. Specification.No : 72&special)
for height upto 50'0"
for height upto 15'0"
Scraping the old plastering surface of vimanams/ wall carefully including isolated bricks or brick work without damaging the vari vargams, racking out the joints, cleaning the surfaces with water including all working in heights, hire charges for special tools, brushes etc complete complying with standard specification and as directed by the departmental officers. (TNBP. Specification.No : Special)
Restoration by providing herbal water wash(Combination of Venthayam powder 20%, Siyakai Powder 10%, Arapu powder 5%, Boonthi kottai powder 50%, Arugampul powder 3%, Nannari ver powder 3%, Vettiver powder 3%, Korai kizhangu powder 3%, and sembaruthi leaf powder 3% total 100%) are used for removel of lime wash on stone and oil smudge) and approrimats methodology to restore the originalities of the existing granite structure inclusive of hire charges scaffolding arrangements conveyance charges for tools & plants and machinaries to the workship spot and cleaning the site after completion of work etc complete complying with standard specification and as directed by the departmental officers.(TNBP. Specification.No : Special)
Pointing with special grinding Lime mortar 1:1.5 ( One Lime and one & half plastering sand ) to restore the originalities of the existing granite stone structureupto only height with neat finishing including all tools and plants and labour etc all complete for cut stone masonry.etc complete complying with standard specification and as directed by the departmental officers.(The lime used should be sourced from Pollachi which is highly iron fortified and suitable for structural and masonry works.)(TNBP. Specification.No : 60)
Plastering with cement Mortar1:5 (One of cement and five of Plastering sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.(The lime used should be sourced from Pollachi which is highly iron fortified and suitable for structural and masonry works.) (TNBP. Specification.No : 52&53)
Painting two coats of newly plastered wall surface withWater based Exterior emulsion paint of first class quality and of approved colour over a priming coat with approved primer including thorough scrapping, clean removal of dirt etc., and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality ,shade and colour of paint should be got approved by the Executive Engineer before use on works.) (TNBP. Specification.No : 66 & 66-A)
Painting with multi colour ( Panchavaranam ) using good water base exterior emulsion paint over a priming coat with approved premeir etc., complete for the vimanam and gopuram for ornamental works including cost and conveyance of all materials labour charges including artist painter working in heights , lifting materials cost of brushes etc. which including allextra for foldingsetc complete complying with standard specification and as directed by the departmental officers all etc for folding 100 sft.( The brand ,colour,shade and quality of paint should be got approved by the Executive Engineer before use on works ) (TNBP. Specification.No :special and similar to 66 & 66-A)
Painting two coats to new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat with approved premier in all floors including the cost of primer etc., complete complying with standard specification and as directed by departmental officers. (The make, quality ,shade and colour of paint should be got approved by the Executive Engineer before use on works.)(TNBP. Specification.No : 66&66-A )
Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over with one coat of priming coat with approved primer in all floors etc., complete complying with standard specification. (The make, quality ,shade and colour of paint should be got approved by the Executive Engineer before use on works.)(TNBP. Specification.No : 66&66-A )
Supplying & Paving flooring with cut stone of size 600 mm X 600 mm and another sizes suitable for site conditions with machine cut edges and not less than 100mm thick and fully dressed as directed by the departmental officers,and set in special grinding Lime morter 1:1.5 ( One of lime and One and Half of M.sand ) and pointing with special grinding Lime morter 1:1.5 ( One of lime and One and Half of M.sand ) including cost and conveyance of all materials etc., complete Complying with standard specifications. and directed by the departmental officers (The lime used should be sourced from Pollachi which is highly iron fortified and suitable for structural and masonry works.)(TNBP. Specification.No : 4&35 and special )
Earthwork excavation for foundation in all soils and sub soils to full depth as may be directed except in hard rock requiring blasting inclusive of shoring shuttering, baling out water wherever necessary, refilling the foundation with excavated earth and depositing the surplus earth within compound in places shown by the departmental officers with an initial lead of 10 metre and initial lift of 2 metre and clearing and leveling the site etc., complete complying with standard specification and as directed by the departmental officers. (TNBP. Specification.No : 23)
Supplying and filling in foundation, basement, etc with filling crushed stone sand ( M.Sand) in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. (TNBP. Specification.No : 24&25 )
Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard granite broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification and as directed by the departmental officers.(TNBP. Specification.No : 28 )
Brick Work in Cement Mortar 1:5 (one of Cement and Five of M.sand) using best quality of country bricks of size 8 3/4"x4 1/4"x 2 3/4" including neat finishing curing etc., complete complying with standard specification and as directed by the departmental officers.(TNBP. Specification.No : 31-C)
Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in existing suitable powder coated duct with module GI switch box 6A one way module switch with module front plate with painting of suitable colour for open light point/fan point (for electronic regulator)(5 points per coil)
Supply and fixing of 23 W LED 6" round surface type fitting with necessary accessories and electrical connection complete (make :orbit/philips/eql)
Supply and run of 35mmX20mm powder coated duct with door arrangement complete with MS angle and bolt &nut complete
Supply and run of 35mmX45mm powder coated duct with door arrangement complete with MS angle and bolt &nut complete
Supply and run of MS flat for clamps of size 2'X1' on pillar with suitable bolt/nut and painting of suitable colour
supply and run of 2 of 4 sq.mm (22/0.3)pvc insulated sc unsheated copper conductor of 1100V grade on wall and ceiling in existing powder coated duct with continuous earth wire connection 4 sq.mm copper wire
supply and run of 2 of 2.5 sq.mm (36/0.3)pvc insulated sc unsheated copper conductor of 1100V grade on wall and ceiling in existing powder coated duct with continuous earth wire connection 2.5 sq.mm copper wire
Supply and fixing of 2nos.6A two module 5 pin socket , 2 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End(set plug) (SD383)
supply and fixing of 1 no.6/16A two module socket ,1no.16A one module switch with module cover pl;ate (plastic)on suitable module concealed box (GI) in flush with wall with connections higher end
supply and fixing of 30 W LED focus fitting complete on suitable MS angle with suitable MS clamp (for Urchavar and Guru bagavan sannathy outer)
Supply and fixing of 100 W LED focus /flood light fitting complete with 1" dia GI pipe supports between the walls with suitable MS clamps ,painting and electrical connections complete.
Supply and fixing of sintex box (SMC) with 1 no.6-32A SP MCB ,16A bakelite connector on a hylem sheet ith inter connection complete (for street light lights/focus/flood lights)
Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB Isolator as incoming and 6 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End
Supply and Laying of 3 1/2 x 25 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.
Supply and clamping of 3 1/2 x 25 sq.mm. PVC LTUG armoured cable Alu cable on post or on wall with MS clamps
Supply and fixing of brass cable gland for 3 1/2 x 25 sq.mm. PVC LTUG armoured cable with earth connection sq.mm.
Supply and providing cable end termination of 3-1/2 x 25 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete
Supply and Laying of 4 x 10 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and putting 0.15m the lay of sand and covering the cable with bricks and refilling the earth to make good.(SD 180)
Supply and clarnping of 4 x 10 sq.mm. PVC LTUG armoured Alu cable in on post or on wall with MS clamps
Supply and fixing of brass cable gland for 4 x 10 sq.mm.PVC LTUG armoured cable with earth connection
Supply and clarnping of 2 x 10 sq.mm. PVC LTUG armoured Alu cable in on post or on wall with MS clamps
Supply and fixing of brass cable gland for 2 x 10 sq.mm.PVC LTUG armoured cable with earth connection
supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting
Supply and fixing of 65mm (2-1/2") GI pipe (Class 'B') of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch ,2/4 way connector on suitable hylem sheet and supply and fixing of 48 W LED street fitting with LED (Higher end) with 1 m 32 mm dia .GI pipe (class B) complete with suitable MS clamps for LED street light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour
supply and fixing of powder coated MS meter box of 16SWG with 3 nos 63A fuse units 1 no 63A neutral link and 1 no 63A FP RCCB/ELCB with necessary inter connection complete and with provision to fix TNEB meter complete
Supply and fixing of 63A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only.
Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry
Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection
SUB TOTAL
V.Anbukarasu (BID ID -1262807)
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .