Renovation of 03 Nos. S-5 Type 04 Nos. S-4 Type and 04 Nos. S-3 Type qtrs. in BBMB Colony Sundernagar

Amount

Dismantling of 8" thick HB masonry in cement mortar.

Dismantling of ACC sheets roofing and ACC plain sheets ceiling including supporting timber

Structural steel work in angles, tees, flats, riveted, including cutting, fixing all gusset plates, bolts, nuts, rivets etc. with hoisting and erecting in position. (a) For roof truss, well curbs, plate girders etc. of any span for building for bridges upto 15M span

Cement concrete 1:3:6 (a) with stone ballast or shingl (ii) mixing by mechanical means using concrete mixer volumetric type .

Steel work fixed independently without connecting plates including cutting, hoisting and fixing in position © Tees,angles & channel

ACC Sheets Roofing 6 mm thick fixed with G. I. Hooks, bolts, limpet and bitumen washers complete fixed in position excluding the cost of purlins, rafters and trusses

Applying priming coat with metal primer on new steel or iron work including preparation of surface

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

P & F 4 mm thick multipurpose cement board confirming to IS: 14862:2000, type ‘B’, Category ‘3’ for false ceiling duly screwed with iron frame with nuts, bolts and washer of size 20x3mm.

Removing doors & windows with chowkhats by making recess in walls when wall is not to be dismantled

Providing & fixing T-iron frames for doors, windows and ventilators of mild steel Tee sections, joints mitered and welded with 15x3mmlugs, 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 or with wooden plugs and screws or with dash fastener or raw plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary Butt hinges and screws and applying a priming coat of approved steel primer.

Supplying and fixing open-able steel windows standard rolled steel section joints mitered and electrically flashed welded with iron fittings including necessary handles, peg stay, catcher, iron lugs and pressed steel projected / box hinges and glazing clips and labour for fixing during masonry complete (Excluding glazing) and finished with 2 coats of ready mixed paint red lead non setting primer. (a) upto 1 sqm area

Supplying & fixing fixed steel window of standard rolled steel sections joint mitered and electrically flash welded including iron lugs and glazing clips and labour for fixing during masonry complete (excluding glazing) and finished with two coats of ready mixed paint red lead non setting primer. .

Providing and fixing 12mm dia M.S. Round or Square bar at required spacing in wooden frames of windows and clear story window.

Wire gauge fixed on steel windows of standard rolled steel sections with 4 mm thick flat iron cover molding of 12.5 mm width fixed with machine screw complete in all respect.

Wire gauze deodar wood door shutter without springs housed in chowkats (Single Leaf) 35mm thick.

Supplying and fixing Glass Panes including special metal sash putty of approved make b) glass panes 4mm thick or 10.75 kg/sqmexceeding 0.4 sqm of area

Providing & fixing 30mm thick Factory Made solid Panel PVC Door shutter (Panel thickness5mm) Consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x19mm for styles & 15mm x 15mm for top &bottom rails. M.S frame shall have a coat of steel primers of approved make & manufacture. M.S frame shall be covered with 5mm thick heat molded PVC 'C' Channel of size 30 x 50mmforming styles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail &bottom rail. Paneling of 5mm thick PVC sheet to be fitted in the M.S Frame welded/Sealed to the styles & Rails with 30mm wide x 5mm thick PVC sheet beading on either side and joined together with solvent cement adhesive. an additional 5mm thick PVC strips of 20mm width is to be stuck on the interior side of the 'Channel using PVC solvent cement adhesives. complete as per manufacturer's specification, Conforming to test criteria specified in IS: 4020-1998, Drawings and to the entire satisfaction of engineer-in-charge.

Providing & fixing 35mm thick wire gauge door shutter with Kailwood without spring housed in chowkhat including fittings.

Dismantling C.C. Floors 25 to 50 mm thick without concrete base.

Conglomerate floor 40 mm thick cement concrete 1: 2 : 4 using machanical mixture for mixing of material

Floating coat of 1.5 mm thick neat cement laid in one operation to the topping.

Providing & fixing glass strips 4mm thick in floors (b) 40 mm wide

Factory manufactured flush door fixed in position iron hinges, etc. excluding the cost of any fitting other than specified above but including labour for fixing the same in position (code:II revision IS-2191 part-I) 1973 commercial with clm gurjan facing on both sides with laminated core and lipped edges:- 35mm thick.

Applying pink primer or Aluminum priming coat on wood work including preparation of surface knotting and stopping etc.

Painting two coats excluding priming coat with ready mixed paint in all shades on new wood work metallic plastered conc. Surface to given shade

Reinforced cement concrete 1:2:4 machanical mixed but excluding steel reinforcement, centering and shuttering in foundation and plinth.

Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

Cold twisted deformed (ribbed/ tor steel) Bars Fe415 grade as per IS 1786-1985 for R.C.C. works, where not included in the complete rate of R.C.C. including bending, binding, and placing in position complete

Scrapping white wash and color wash

Cement plasters 12.5 mm thick in 1:5.

Cement pointing raised in 1:2 on outer surface of walls.

Whitewash 3 coats on ceiling.

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade.

Finishing walls with exterior decorative cement-based water soluble exterior paint such as Snowcem/Robbie etc. two coats to give an even shade.

General repair of walls after replacement of roofing including disposal of surplus rubbish. S-3 type

S-4 Type

S-5 Type

P&F helical door spring 150mm (superior quality) i/c necessary screws complete.

Cost of aluminum fitting complete for doors, windows such as tower bolts, handles and screw etc. for these fitting (Excluding sliding bolts) i) for shutter area upto 0.50 sqm

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required color or shade with nuts and screws etc. complete :(a) 300mm x 16mm

Dismantling concrete or precast concrete. 1:2:4

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand, 6 graded stone aggregate 20 mm n/s) over 75 mm bed of dry brick ballast 40 mm n/s well rammed and consolidated and grouted with fine sand i/c finishing the top smooth.

Earth work excavation in ordinary exclusive of compensation of earth (a) Kassi work undressed involving an average horizontal throw up to 2.00 mtr. and an vertical lift up to 0.50 mtr. i/c breaking of clods.

Base course of floor consisting of 100 mm thick cement concrete 1:8:16 with 100 mm fine sand or stone filling.

Conglomerate floor 50mm thick cement concrete topping 1:2:4

Supplying and fixing fan clamps with 50mm x6mm flat iron, 50cm long and U-hooks of 16mmdiameter M.S. bars, of approved size with nuts including threading etc. complete.

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading.

Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 250 x 330 mm & 300x300mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Electrical Section : RECESSED HDPE PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked), overall 1.5sq. mm, 1100volts grade to be laid in HDPE electrical conduit pipe 20mm/25mm dia. ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- (i) a Wiring fan point (Without fan box)

(ii)Wiring light point

(iii)Wiring call-bell point

(v) Wiring 6Amp. Plug control comprising wall socket point

(vi) Wiring 16/20Amp. power plug control point

PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- (v) Overall size 6sq.mm (Un-sheathed)

(iv) Overall size 4sq.mm (Un-sheathed

(iii) Overall size 2.5sq.mm (Un-sheathed)

MINIATURE CIRCUIT BREAKERS/ RCBO's/ RCCB's: MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- (A) (i) MCB Single Pole 0.5-4amp. (10kA, Curve C)

(A) (ii) MCB Single Pole 6-32amp. (10kA, Curve-C)

(A) viii) MCB Double Pole 50, 63amp. (10kA, Curve?C)

(A) (vii)MCB Double Pole 40amp. (10kA, Curve-C)

SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's: Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color?coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:- (ii) SP&N Double Door Distribution Board 8 way each

(iii) SP&N Double Door Distribution Board 12 way each

DISMANTLING WIRING POINTS & FITTINGS: Dismantling old wiring points including necessary repairs to wall etc:- (i) Fan, light or call bell point

(ii) Wall socket, power plug point

Sanitory Work : Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI makred including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge.

Providing and fixing in position Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity. (without cistern fitting) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. (a) Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity (without cistern fitting) size 62x37x67 cm with P trap or S trap and seat cover complete in all respect.

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. (ii) Size 550 mm x 400 mm x 815 mm

Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect I) Vitreous chinaware standard white pedestal for wash hand basin.

Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304 (18/8) with waste coupling complete in all respect. A) Rectangular Sink with Deluxe Border Single Bowl Overall Size 700 mm x 555 mm x 230 mm

Providing and fixing in position C.P. brass overhead shower 1 flow with shower arm with 15mm i/d inlet of approved make (to the approval of Engineer-in-charge) complete in all respect.

Providing and fixing in position paper holders of approved make (to the approval of Engineer-in-charge ) fixed in to wall with C.P brass screws complete in all respect. A) C.P. brass toilet paper holder

Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. A) C.P. brass towel Rails size 15mm dia 610mm long

Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.

Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) a) Size 600mmx450mm

Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect. i) C.P. brass Bib cock long nose/ long body foam flow without flange

Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. A) C.P.brass 15mm stop cock Male and female end

Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B?Class including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. a) 15 mm i/d

b) 20 mm i/d

Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer - in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. i) Triple Layer Tanks

Bidder Name

Amount in Words

M/S SHARMA ELECTRICAL WORKS

LEKH RAJ

SURESH PAL

M/S SHARMA ELECTRICAL WORKS

SURESH PAL