Special Repair to Vaidya Marg from Vaidya Gate to 1700 Mtrs including road furniture, Footpath and allied works Suratgarh Mil Stn

Amount

M&L for preparing black top bituminous surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with air compressor through air jet to remove all loose dirt etc and applying evenly a premix/tack coat of catonic bitumen Emulsion (RS-1) confirming to IS:18887 at the rate of 0.02 to 0.30 Kg per Sqm on bituminous road surface as specified in Table 500-5 of MaRTH specification for road and bridge work 2013, by sprayer operated on hot pressure mechanism and Providing and laying spreading 30mm thick (consolidated thickness) of Premix Bituminous Concrete with crushed aggregates of grading 2 as per design based on Job mix formula with 5.5% bitumen binder content (bitumen of Grade VG-30) by weight of total mix including heating bitumen to the required temperature, mixing bituminous concrete in automatic and temperature controlled hot mixing with electronic operated 100-120 TPH batch type hot mix plant, transporting the hot mix from HMP to work at site by tippers and laying, spreading uniformly by means of hydrostatic paver finisher and rolling and consolidating to the required gradient and camber with 8 to 12 tonne smooth wheeled, vibratory and tandem roller, complete all as per Clause 507 MoRTH (5th Rev) specification and as specified and directed. Notes : (i) Catonic bitumen emulsion for premix/tack coat and Paving bitumen of Grade VG-30 for Bituminous Concrete shall be used and procured by the contractor under his own arrangement and at his own cost. (ii) Cost of all the materials, T&P, labour etc. required for preparation of surfaces, applying tack coat, providing and laying bituminous concrete including procurement of bitumen as specified here-in-before, stone aggregates & sand, cement etc., rolling and all other elements required for entire completion of the job shall be deemed to be included in the unit rate quoted for this item.

M&L for applying evenly a premix/tack coat of catonic bitumen Emulsion (RS-1) confirming to IS:18887 at the rate of 0.02 to 0.30 Kg per Sqm on bituminous road surface as specified in Table 500-5 of MoRTH specification for road and bridge work 2013, by sprayer operated on hot pressure mechanism and M&L for providing, laying, spreading premix bituminous macadam with crushed and graded stone aggregate mixed together with 4% of paving bitumen of grade VG-30 by weight of total mix including heating bitumen to the required temperature, mixing bituminous macadam in automatic and temperature controlled hot mixing with electronic operated 100-120 TPH batch type hot mix plant, transporting the hot mix from HMP to work at site by tippers and laying, spreading uniformly by means of hydrostatic paver finisher and rolling and consolidating to the required gradient and camber (consolidated thickness 75 mm or less) with 8 to 12 tonne smooth wheeled, vibratory and tandem roller, complete all as per Clause 507 MORTH (5th Rev) specification and as specified and directed.

Note : (i) The contractor shall quote the rate against item considering 4% VG-30 bitumen content. Job Mix Formula as per CIause No. 505.3.3 of MORTH (5th Rev) for BM shall be worked out from MNIT Jaipur/MBM Jodhpur/ Govt Engineering Collage/Lab/ CTL for obtaining Optimum Binder Content (OBC) by the Contractor without any financial effect to the Department and same be submitted to the Accepting Officer for approval. Any variation in binder content on Minus side shall be adjusted @ 50/Kg of binder and no adjustment shall be made on Plus side. (ii) The bituminous macadam (BM) shall be covered with top layer/wearing course within in a maximum of 48 hours. If there is to be any delay by the contractor the course shall be covered by seal coat to the requirement of Clause 512 of MoRTH (5th Rev) before opening to the traffic. The seal coat in such cases shall be considered incidental to the work and shall not be paid for separately. (iii) Job mix formula shall be approved by CWE

M&L for preparing bituminous surfaces of road and marking 2mm thick centre lines, stop lines, dashes, arrows, letters etc. and the like not exceeding 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed and confirming to IRC:35 and MoRTH Specifications, Clause 803.

S&F Solar road Stud of size 125mm x 125mm x 25mm (shank 65mm), aluminium alloy shell, electronically operated automatically turns ON at night and turns OFF at day, high efficiency mono crystalline solar panel 2.4 V / 0.3 Watt, one Ni-Mh or Ni-Cd rechargeable battery (1.2 V / 1600 MA), six super bright LEDs with 10000 to 18000 mcd (Millicandela), view distance upto 1000m, flash rate 2 Hz, capable to withstand weight upto 10 tonne, unbreakable poly carbonate clear facing designed for maintenance free operation, 100% water proof design according to IP-65, Red or Amber colour, complete all as specified and as directed including dismantling and taking out old unserviceable / broken solar road stud of any type. Notes :- (i) Solar Stud shall be of Model “DA 110 (DHRUV)’ of make ‘DARK EYE’ or equivalent makes out of makes specified in list of makes. (ii) Reflector shall be positioned at the best eye guiding level so that drivers shall be warned from a safe distance.

S&F High Intensity Prismatic (HIP) grade retro reflective sheet in approved colour, cutting precisely in required shape & size, pasting on old/new stainless steel/mild steel/fiber sheet of sign board including removal of old unserviceable sheet where required and preparation of surfaces as per manufacturer's instructions complete all as specified and as directed. Make: 3M (HIP) Series 3930 or equivalent makes out of makes specified in list of makes.

M&L for providing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc, including welding, grinding, buffing, polishing and making curvature ( where ever required) and fitting the same with necessary stainless steel nuts, bolts complete including fixing the railing with necessary accessories & stainless steel dash fastners, stainless steel bolts etc of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.

Dismantling of stone slabs/chequered tiles of any thickness, laid dry as in floors/aprons/path/hardstanding complete all as specified and as directed.

M&L for 75 mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed.

M&L for Sand filling 25 mm thick consolidated thickness in floors below interlocking tiles and the like, complete all as specified and as directed.

M&L for factory made precast concrete interlocking paver block (Red/Yellow) with grey cement and pigment (Rubber moulded coloured interlock Red/Yellow tiles designer polished (Reflective type) Glossy finish tiles) of any shape and size confirming to IS-15658-2006 of 60mm thickness and of Grade M-35 laid over sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as specified and as directed. Notes : (i) Shape of paver blocks shall be as approved by the GE. (ii) Sand cushioning shall be measured & paid for separately under respective item of this Schedule.

M&L for cement concrete 1:3:6 type C1, using 20mm graded crushed stone aggregate as in copings, including weathering, slightly rounded, chamfered angle and throating as directed including use and waste of form work (straight or curved) all exposed surface of concrete finished fair complete all as specified and as directed.

M&L for factory made precast cement rubber moulded concrete kerb stone of 1:2:4 (20mm graded stone aggregate) of size 450x300x150mm with weathering, slightly rounded, chamfered angle and throating , fixed in position to required line, level and curvature, jointed with cement mortar 1:4 including making joints with or without groove (thickness of joint shall not be more than 5mm except in curve portion) including making drainage opening complete all as specified and as directed.

Demolition of brick work built in cement or cement lime mortar or precast concrete articles complete all as specified and as directed.

M&L for brick work with subclass ‘B’ burnt bricks, old size straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

All as per item No 14 here-in-before but except bricks (using old bricks retrieved from item No 13.00 including cleaning of bricks) complete all as specified and as directed.

M&L for rendering 12mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified.

M&L for 150mm bore reinforced concrete pipe, class NP-2, ISI marked, laid to slope in trenches, jointed in CM (1:1) including collar and tested, including demolition and breaking up drain pipes (SGSW, AC or RCC) set in cement mortar complete all as specified and as directed. Note :- Excavation & earthwork shall be measured and paid separately.

M&L for preparation of new concrete surfaces of Kerb stone and the like over 10cm in width or girth and applying two coats of synthetic enamel paint of approved tint complete all as specified and as directed. Note : Painting to Kerb stones in alternate tint as approved by GE shall be carried out.

M/s Amit Construction Company (BID ID -3495040)

Ram Parkash Constructions Pvt. Ltd. (BID ID -3495064)

SHREE GURU NANAK CONSTRUCTION COMPANY (BID ID -3495566)