Heritage Assets Instillation of Portable toilet block and drinking water at Fort and Dungeons Manzarabad Hassan 2025 26 Retender

Sub Heading 1

Earth work in excavation by manual means for portable toilet block foundation, septic tank, soak pit and sump tank over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge

Laying in position cement concrete for portable toilet block of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 Cement: 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 40 mm nominal size derived from natural sources)

Coursed rubble masonry for portable toilet block with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement: 6 coarse sand)

Reinforced cement concrete work at plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement for portable toilet block 1:1.5:3 (1 cement: 1.5 coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and Medium Tensile steel bars

Centering and shuttering including strutting, propping etc. and removal of form work for plinth beam for portable toilet block

Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift.

Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20% per litre

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement: 3 coarse sand) finished rough with sponge

Laying Ceramic glazed floor tiles for portable toilet block of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete

Finishing exterior walls of portable toilet block with Premium Acrylic Smooth exterior paint with Silicone additives of required shade new work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)

Supplying fitting, fixing, of MS Portable toilet cabin of size 16'X4'X8.5' attached EWC 4 with wash basin. As per specifications below 1. Bottom Frame: Made of 100x50mm formed MS pipes of specified thickness, ISI marked. 2. Stiffener Bottom: Uses 80x50 and 50x50mm tubular pipes, ISI marked. 3. Top Frame: Fabricated using 50x50mm tubular pipes, ISI marked. 4. Stiffener Top: Consists of 50x50mm, 25x50mm, and 25x25mm tubular pipes, ISI marked. 5. Side Wall Stiffeners: Corner posts made of 50x50mm tubular pipes with 3mm wall thickness, ISI marked. 6. Paneling Outside: Specially corrugated 1.2mm thick MS sheet welded on MS frame, ISI marked. 7. Internal Wall Paneling:Made of 8mm thick pre-laminated particle board or MDF board. All vertical and horizontal corners are neatly and smoothly finished with aluminum sections. 8. Roof Outside: 1.2mm thick MS sheet properly sloped with water-tight joints, ISI marked. 9. BottomFlooring:18mm thick Bison panel at the bottom. Cement bonded fiber sheets fixed using self-tapping screws .1.5mm thick PVC vinyl carpet applied (100% waterproof, termite, and dimensionally stable). 10.Aluminum Sliding Windows:Double shutter aluminum windows with 1.2mm coating.4mm thick glass used for all windows. Includes safety grills and canopy above the windows. 11. Main Door: External opening door made from the same material as wall panels and canopy.Frame made of 25x25x2.5mm tubular pipe. Door interior finished to match the cabin interior with standard hardware locks and handles. 12. Insulation: 25mm glass wool (density 32 kg/m³) used for insulation on the top and side walls. 13. Wiring:Concealed PVC-insulated copper wires of ISI quality.240V, 50Hz single-phase AC supply with MCB protection.Light & Fan: 1.5mm thick cable.Socket & AC: 2.5mm thick cable.Main Supply: 4mm thick cable. 14. Outside Painting: All components painted with one coat of primer and two coats of corrosion-free synthetic enamel paint. 15. Hooks: Specially formed for easy lifting and shifting. Warranty: 1year warranty on."

PVC manhole cover of 600mm X 600mm for septic tank and soak pit including supplying, fitting, fixing and transportation etc

Disposal of rubbish similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge to the appropriate disposal area

Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments. providing pump set 10 HP, size 80x65 Head 34.50M, Discharge 840 LPM for pumping water from sump tank

RO drinking water filter with stainless steel tank storage capacity of 150 litre. 50 LPH with two SS taps

Brick work with common burnt clay non modular bricks of class designation 3.5 for brick wall in Cement mortar 1:4 (1 cement: 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer in charge of work.

MS Grill door for RO drinking water unit made of L angle vertical 60mmx60mmx6 mmx2.8 mx 4 nos ,L angle horizontal 4 nos 60mmx60mmx6 mmx1.2x4 nos , 1 no MS flat 60 mm wide 6mm thick ,MS round bars 16 mm dia 8 nos including cutting , fitting , fixing in position , transportation, materials , labours etc complete as per direction of site incharge complete .

Supplying fitting, fixing, of MS Portable toilet cabin for physically handicapped of size 8'X8'X8.5' attached EWC 1 with wash basin. As per specifications below 1. Bottom Frame: Made of 100x50mm formed MS pipes of specified thickness, ISI marked. 2. Stiffener Bottom: Uses 80x50 and 50x50mm tubular pipes, ISI marked. 3. Top Frame: Fabricated using 50x50mm tubular pipes, ISI marked. 4. Stiffener Top: Consists of 50x50mm, 25x50mm, and 25x25mm tubular pipes, ISI marked. 5. Side Wall Stiffeners: Corner posts made of 50x50mm tubular pipes with 3mm wall thickness, ISI marked. 6. Paneling Outside: Specially corrugated 1.2mm thick MS sheet welded on MS frame, ISI marked. 7. Internal Wall Paneling:Made of 8mm thick pre-laminated particle board or MDF board. All vertical and horizontal corners are neatly and smoothly finished with aluminum sections. 8. Roof Outside: 1.2mm thick MS sheet properly sloped with water-tight joints, ISI marked. 9.Bottom Flooring:18mm thick Bison panel at the bottom. Cement bonded fiber sheets fixed using self-tapping screws.1.5mm thick PVC vinyl carpet applied (100% waterproof, termite, and dimensionally stable). 10. Aluminum Sliding Windows:Double shutter aluminum windows with 1.2mm coating.4mm thick glass used for all windows. Includes safety grills and canopy above the windows. 11. Main Door: External opening door made from the same material as wall panels and canopy. Frame made of 25x25x2.5mm tubular pipe. Door interior finished to match the cabin interior with standard hardware locks and handles. 12. Insulation: 25mm glass wool (density 32 kg/m³) used for insulation on the top and side walls. 13. Wiring: Concealed PVC-insulated copper wires of ISI quality.240V, 50Hz single-phase AC supply with MCB protection.Light & Fan: 1.5mm thick cable.Socket & AC: 2.5mm thick cable.Main Supply: 4mm thick cable. 14. Outside Painting: All components painted with one coat of primer and two coats of corrosion-free synthetic enamel paint. 15. Hooks: Specially formed for easy lifting and shifting. Warranty: 1year warranty on.

Please Enable Macros to View BoQ information