Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.6 LAccepted-AOC C O BLUE STAR MEDICAL HALL BAGDOGRA DIST DARJEELING WB | BAGDOGRA | DARJEELING | WEST BENGAL | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹49.7 L+₹1.7 L (3.54%)Rejected-Finance | L2 | Rejected-Finance Not lowest bidder | |
| 3 | L3₹51.8 L+₹3.8 L (7.93%)Rejected-Finance | L3 | Rejected-Finance Not lowest bidder | |
| 4 | L4₹53.7 L+₹5.8 L (12.1%)Rejected-Finance | L4 | Rejected-Finance Not lowest bidder | |
| 5 | L5₹54.6 L+₹6.7 L (13.9%)Rejected-Finance 10 UDAY SHANKAR SARANI SEVOKE ROAD SILIGURI DIST DARJEELING WB PIN 734 001 | JALPAIGURI | WEST BENGAL | 734001 | L5 | Rejected-Finance Not lowest bidder |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
6 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BENGDUBI
Bengdubi Military Station PO-Bengdubi,Dist-Darjeeling, Pin 734424
WELCOME MAINTENANCE FOR B/R WORKS AT B ZONE MD ACCN UNDER AGE B/R-I AT GE BENGDUBI MIL STN
2022_MES_519891_4
GE/BENG/16 OF 2022-23
Open Tender
Civil Works
Item Rate
270 days
GE BENGDUBI
MES Enlisted/ Un-enlisted contractor of Class D and above with category a(i)
8 documents required · 8 mandatory
₹500
GE BENGDUBI
₹90,000
Yes
4 Nov 2022
19 Sept 2022
8 Oct 2022
19 Sept 2022
6 Oct 2022
27 Sept 2022
Amount
SCHEDULE 'A'
Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing and rubbish off the premises.
M&L for Glass mosaic, joint free coloured tiles on floors/walls over and incl 15 mm thick screed bed/backing coat in CM(1:4) set jointed in neat cement slurry and pointed with colour cement to match the tiles complete all as specified and directed.
M&L for non skid ceramic tiles joint free coloured tiles 7mm to 8mm area exceeding 0.11sqm but n.exc 0.18 sqm on floors over and incl 15 mm thick screed bed in CM(1:6) set jointed in neat cement slurry and pointed with colour cement to match the tiles complete all as specified and directed.
M&L for Non-skid coloured ceramic tiles 7 to 8mm thick(square/rectangular)area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile and including 20mm thick screed bed or bedding layer in cement mortar (1:6) in floor etc complete all as specified and as directed.
M&L for glazed coloured ceramic tiles joint free coloured 300 X 450 mm size 7mm thick on walls over and incl 10mm thick plastering in CM(1:4) set jointed in neat cement slurry and pointed with colour cement to match the tiles complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.
M&L RCC(Nominal mix) 1;2:4 Type B0 (using 12.5 mm graded stone aggregates) for Columns, pillars, piers, posts and struts complete all as specified and directed.
M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finished surfaces of concrete flat circular on plancomplete complete all as specified and directed.
Material & Labour for TMT bars 6 to 8mm dia cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips complete all as directed and specified.
Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. Laid, bedded and pointed in any mortar complete all as specified and directed.
M&L for 15 mm thick Granite (of any type of) work ( table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
M&L for Machine cut kota stone slab flooring 15-20 mm thick over 20 mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed
M&L for Machine cut kota stone slab flooring 15-20 mm thick as in skirting, riser of steps, dado and pillar over 10 mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed
M&L for Washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of cement based paint (any tint) on walls complete all as specified and directed.
M&L for Washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of oil bound distemper (any tint) on walls complete all as specified and directed.
M&L for preparation of old pained wooden surfaes of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint any tint complete all as specified and directed.
M&L for preparation of old pained wooden surfaes of any description n.exc 10 cm width or girth and applying one coat of synthetic enamel paint any tint complete all as specified and directed.
M&L for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint any tint complete all as specified and directed.
M&L for preparation of old painted steel surfaces of any description n.exc 10cm width or girth and applying one coat of synthetic enamel paint any tint complete all as specified and directed.
M&L for preparing plastered or unplastered old surface of walls including brooming down or scrapping down with steel wire brushes, smoke soot, moulds, moss efflorescent salts and trading oil and greasy spots and applying one coat of white (Lime) wash on wall complete all as specified and directed.
All as specifed in above item No. 94 above but applying one coat of white (Lime) wash on ceiling complete all as specified and directed.
M&L for preparation of old wall painted surface and apply one coats of plastic emulsion paint over a coat of primer complete all as specified and directed
M&L for preparation of old floor painted surface and apply one coats of Apex paint over a coat of primer complete all as specified and directed.
Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings incl ridges, hips, valley gutter complete all as specified and directed.
S & F Pre painted galvalume trapezoidal profile aluminium Zink coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / Cladding to wall etc fixed with self tapping screws as specified.
S & F of thickness 0.56mm Plain, Aluminium sheeting, alloy as in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified.
Dismantling wrought iron or mild steel work of any description and in any position complete all as specified and directed.
S&F for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe 410 W (Gde-E-250 quality - B) complete all as specified and directed
Demolition of PCC in roof covering, kerbs, roof kerbs, benching, coved fillets etc including old decayed water proofing treatment of any type complete all as specified and directed.
M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying 25mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate finished even & smooth without using extra cement to cover negative slope into prop with WPC @ 2% weight of cement complete all as specified and directed.
Supply and apply shaliUrethane BTD primer @ 0.4kg/sqm over the prepared surface, supply and apply a single component Elastomeric modified polyurethane of STP make ShaliUrethane BTD (white in colour) having an Elongation, % ASTM D 2370, 500+-50, Tensile strength, (MPa) ASTM D2370, 0.2, Adhesion to primed concrete, pull off strength, (MPa) ASTM D 4541, 0.40, Extension after heat aging, mm ASTM C 836, 6, Crack bridging at low temperature, ASTM C 836, No cracking, water absorption % ASTM D471, less than 5. over the primed surface application of first coat of shaliUrethane BTD followed by polyscrim cloth of STP make ShaliGeoText of 40-50 gsm, Then of Second coat of ShaliUrethane BTD to obtain the overall dry film thickness of 1.5mm. (Make -STP Limited or equivalent make as per BIS.
Supply only Liquid water proofing compound complete all as specified and directed
PCC 1:2:4 mix type B-0(using 12.5mm graded aggregates) as in roof kerbs rounded or chambered on edge complete all as specified and directed.
Demolition of brick work built in cement mortar complete all as specified and directed.
M&L for old size fly ash brick work with sub class 'B' bricks, straight for curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed
M&L rendering in CM 1:4 on walls 15mm thick on fair faces of brick work finished the surface even and smooth with out using extra cement complete all as specified and directed.
Taking down cement plaster of any description in any position incl racking out joints hacking for key, scrubbing down with water etc and removal of debris from site complete all as specified and directed.
M&L rendering in CM 1:4 on walls 15mm thick on fair faces of brick work finished the surface even and smooth with out using extra cement complete all as specified and directed.
M&L Rendering 15mm thick on other than fair faces in CM 1:6 finished the surface even and and smooth with out using extra cement complete all as specified and directed.
M&L rendering 5 mm thick in cm 1:3 over/soffit of chajja finished surface even and smooth with out using extra cement all as specified and directed.
M & L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.
M&L Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of 1mm thick wall care putty complete all as specified and directed.
M&L for preparation of new plastered surfaces of ceiling and chajjas applying three coat white wash complete all as specified and directed.
Demolition of cement concrete unreinforced in Ground floor & paving n.exc 15cm thickness and removal of debris from site complete all as specified and directed.
M&L for PCC 40mm thick 1:2:4 type B-1 using 20mm graded stone aggts as in floor, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.
M&L for PCC 100mm thick 1:2:4 type B-1 (using 40mm graded stone aggregates) as in floor, finishing cement concrete surface even and smooth without using extra cement complete all as specified and direced
M&L for precast cement concrete Type C-1 (1:3:6) using 20mm graded aggregate as in man hole cover set in CM 1:6 complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets and frame work
Providing and fixing PVC FALSE CEILING consisting of 600x600mm, 5mm (+0.25) thick plain ambossed PVC sheet of 600Kg/Cbm Density manufactured by ISO 9001-2008, certified company, used as panel insert in a frame work made using anodised aluminium T- section of sizes 1"x1" (25x25mm, 19 gauge or 1mm thick) in square pattern of grid sizes of 2'x2'(600x600mm). the aluminium frame work is supported from the ceiling with the help of "J" hook and GI wire/6mm MS rods of require sizes to maintain proper level etc. The aluminium framework is supported on side wall with the use of aluminium L-section of size 1"x1"(25x25mm) angles etc. complete as specified by manufacturer & drawing and directed by Engr-in- Charge.
Taking down steel tubing and connection 15mm bore.
Taking down steel tubing and connection 20mm bore.
Taking down steel tubing and connection 25mm bore.
S&F G I tubing medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floors bore of tube 15 mm complete all as specified and directed.
S&F G I tubing medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floors bore of tube 20 mm complete all as specified and directed.
S&F G I tubing medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floors bore of tube 25 mm complete all as specified and directed.
Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.
Supplying and laying of 25mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.
Supply and fix in repairs PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.
Supply and fix in repairs PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.
Supply and fix in repairs PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fix to wall complete all as specified and directed.
Supply and fix in repairs PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fix to wall complete all as specified and directed.
S & F in repair for stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm bore of pipe complete all as specified and directed.
S & F in repair for stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110 mm bore of pipe complete all as specified and directed.
S&F PVC (SWR) vent Cowl for 110 mm bore pipe complete all as specified and directed.
S&F PVC (SWR) Bends (any radius ), diminishing pieces or tapers, bore of pipe 75mm, complete all as specified and directed.
S&F PVC (SWR) Bends (any radius ), diminishing pieces or tapers, bore of pipe 110mm, complete all as specified and directed.
S&F PVC (SWR) Branch pieces , single (single Y )equal or unequal of pipe 110mm bore complete all as specified and directed.
S&F PVC (SWR) junction single, Single T equal or unequal for 75 mm bore of pipe complete all as specified and directed.
S&F PVC (SWR) junction single, Single T equal or unequal for 110 mm bore of pipe complete all as specified and directed
S&F PVC (SWR) 'P' trap for 110 mm bore of pipe complete all as specified and directed.
S&F PVC (SWR) WC connector with lip ring for 110 mm bore of pipe complete all as specified and directed.
S&F PVC (SWR) floor trap, plain with grating 75mm including jointing to wast pipe fixed in cement concrete type B1 (1:2:4) ,in repairs and including waterleak proof treatment complete all as specified and directed.
Dismantling PVC water tanks exc. 500 litres but n. exc. 1000 ltrs capacity complete all as specified and directed.
S&F rotational moulded polyethylene water storage tanks of capacity 500 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I.
S&F in repair 25 mm bore, gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
S&F in repair ball brass valve, high pressure, with ploythene float and flynut complete, screwed for iron pipe or brass ferrule 20 mm bore complete all as specified and directed.
S & F in repair Bib tap 15 mm, fancy type, long swan neck, CP with crutch or butterfly handle screwed down srewed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in repair Brass CP mixer for mixing hot & cold water screwed down for 15 mm bore pipe complete all as specified and directed.
S&F in repair CP angle stop cock 15 mm bore fancy type cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S & F in repairs CP brass shower rose 125 size dia complete all as specified and directed.
S & F in repair Vitreous china wash down water closet European type (pedestal pattern) (excluding flushing cistern and flush pipe) including connection to outgoing pipe and seat cover and flushing pipe complete all as specified and directed. (Make: Hindware or Cera)
S & F in repairs 10 lits capacity PVC flushing cistern low level, white, with inlet, ball valve, float and handle and flush pipe including brackets etc complete all as specified and directed.
S&F in repair vitreous china wash hand basin in repair oval special type 510x410mm including CP fancy type 15 mm pillar taps including 32mm dia PVC waste pipe, and 32 mm dia brass CP waste coupling complete all as specified and directed. Make-Hindware, CERA
S&F in repair chromium plated Soap dish complete all as specified and directed
M & L for 3 mm thick sheet plain glass ordinary quality and glazing with oil putty or wooden beads in squares n.exc 0.50 sqm in each pane complete all as specified and directed.
Cutting chases, pinning in brick walls and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.
M & L for providing and fixing stainless steel (Grade-304) railing made of hollow tubes, channels, plates etc, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc, of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.
(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 1,32,260.00 (refer Tender Srl Page No 33). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’
J T ENTERPRISE
SRI A B SEN
M/S Joy Construction
Paritosh Saha
UNIVERSAL CONSTRUCTION
S K ENTERPRISE
GURUNG CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .