REPAIR TO JOINERY IE DOORS CUPBOARDS ETC WITH CONNECTED ITEMS AND MAINTENANCE OF LEAKAGE/ SEEPAGE INCL REPAIR OF ROOF IN ANUJ VIHAR UNDER AGE B/R-I (S) OF GE (SOUTH) DELHI CNATT 10

Amount

Taking down chowkhats or frames with shutter n exc 1.5 sqm each but without taking off shutters from the frame complete all as specified and directed by Engineer-in-Charge.

Taking down shutter of any description exc 1.00 sqm nexc 2.00 sqm each complete all as specified and directed by Engineer-in-Charge.

M&L for 35mm thick 2nd class hardwood glazed and skelton shutter open rabated and prepare to receive gauge etc divided into square with plain, chamfered or rounded fixed with cut : mitered beads for receiving gauge etc complete all as specified and directed by Engineer-in-Charge.

S&F in repair 35mm thick flush shutters solid core construction with block board core and plywood face panels,commercial type on both side complete all as specified and directed by Engineer-in-Charge.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be coloured with heat mould plain coloured PVC'C channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stills and plain colour PVC sheet for top rail lock and botton rail either side and as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading. And jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engineer-in-Charge.

S&F solid PVC doors & frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19mm MS square tube of 19 guage s&f in opening as per specification & drg in SSR 2004 Part II complete all as specified and directed by Engineer-in-Charge.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:3:6 type C-1 using 20 mm graded aggregate as in hold fasts incl necessary form work complete all as specified and directed by Engineer-in-Charge.

S&F 100mm long butt hinges stainless steel complete all as specified and directed by Engineer-in-Charge.

S&F 100mm long butt hinges medium wt cold rold mild steel complete all as specified and directed by Engineer-in-Charge.

S&F 100mm long mild steel self closing hinges welded to pressed steel frame as per sample complete all as specified and directed by Engineer-in-Charge.

S&F 150mm long aluminium anodised barrel tower bolt extruded section complete all as specified and directed by Engineer-in-Charge.

S&F 125mm long extruded aluminium alloy handle complete all as specified and directed by Engineer-in-Charge.

S&F MS sliding door bolt 250mm long clip type stove enameled black with bright bolt not less than 12mm dia with incl min of 6 bolt and nuts four on bolt plate and two on stapple plate complete all as specified and directed by Engineer-in-Charge.

S&F in repair for mild steel handle for steel window left or right as per sample complete all as specified and directed by Engineer-in-Charge.

Hacking out old broken glass of any size, thickness, quality or description from metal frame nexc 1.5 sqm each complete all as specified and directed by Engineer-in-Charge.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty / wooden beadsin squares not exec 0.5 sqm each pane complete all as specified and directed by Engineer-in-Charge.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty / wooden beads in squares exc 0.5 sqm each pane complete all as specified and directed by Engineer-in-Charge.

All same as per ser item No 18 above but figured glass pin headed type complete all as specified and directed by Engineer-in-Charge.

S&F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and avg aparture 1.18mm and fitted with tinned tacks or galvanised wire stapple complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge.

M&L for preparing of new steel surfaces of any description not otherwise described, over 10 cm width or girth & applying Two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 75mm long brass handles cast type as per approved sample complete all as specified and directed by Engineer-in-Charge.

S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished complete all as specified and directed by Engineer-in-Charge.

S&F in repairs for telescopy channels 22" long fixed in cupboards complete all as specified and directed by Engineer-in-Charge. Make-Hettick.

S&F in repair 18 / 19 mm thick prelaminatd partical board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination for cubboard incl taking down old complete all as specified and directed by Engineer-in-Charge.

S&F 6mm thick plywood grade BWP, type BB fixed with screw to timber frame work or with adhesive in Cup board incl taking down old complete all as specified and directed by Engineer-in-Charge.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and avg aparture 1.18mm and fitted with tinned tacks or galvanised wire stapple complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed by Engineer-in-Charge.

S&F in repair, 25 mm bore mild steel 0.8mm thick conduit pipe with PVC ribbed lamination of required length for curtain rods including two fixing mild steel powder coated matching colour full round or half round with fixing nuts (bracket holders),& PVC golden finish end knobs(Two number for each curtain rod of any length) and PVC gold finish curtain ring @ 3 nos/feet complete all as specified and directed by Engineer-in-Charge.

M&L for welding in repair in any situation and in any position such as hinges and similar articles etc for steel door, gates, window, ventilatiors and grills etc for upto four stoery building complete all as specified and directed by Engineer-in-Charge.

S&F in repairs ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed by Engineer-in-Charge.

Dismantling Brick tiles or terracing tiles single layer on roofs and removal from site complete all as specified and directed by Engineer-in-Charge.

Demolition mud in roofs any thickness including plastering and leaping and removal from site exc 250 m but not exc 500 m and deposited complete all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:2:4 type B-1 using 20 mm graded aggregate as in roof padding for providing rqd slop finishing surface even and smooth with out using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for screed bedding 15 mm thick plaster in CM 1:4 on roof finished even and fair using extra cement on roof with water proofing compound up to four stories bldgs WPC shall be measured and paid seperately complete all as specified and directed by Engineer-in-Charge.

S&F APP based polymeric water proofing membrane minimum weighing 3 Kg/sqm and 3mm thick reinforced with polyster non woven fabric ( weight not less than 150 gms/sqm laid over and including applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per sqm by torch application including cleaning of surface complete all as per approved manufacturer,s instructions Note:- The water proofing treatment shall be got carried out by manufacturer or their auth applicators complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete tiles 30cmx30cmx22mm thick laid over and including 20mm thick screed in cement mortar 1:6 and jointed grouted and pointed in CM 1:3 complete all as specified and directed by Engineer-in-Charge.

Supply only water proofing compound.(ISI Marked.Siko or equivalent) complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster on brick/concrete surface including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

M&L for 15mm thick cement mortar plastering in CM1:4 on fair faces of brick or concrete surfaces conc surfaces finished even and smooth with out using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed by Engineer-in-Charge.

BLANK

Disconnecting existing tanks of capacity exc 250 ltr n.cex 500 ltr , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing etc. measured separately) complete all as specified and directed by Engineer-in-Charge.

Disconnecting existing tanks of capacity exc 500 ltr n.cex 1000 ltr , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing etc. measured separately) complete all as specified and directed by Engineer-in-Charge.

Cleaning and removing all scale and dirt, etc. from tanks of capacity exc 250 ltr & n. exc 500 ltr and form mouths of circulating pipes, etc complete all as specified and directed by Engineer-in-Charge.

Cleaning and removing all scale and dirt, etc. from tanks of capacity exc 500 ltr & n. exc 1000 ltr and form mouths of circulating pipes, etc complete all as specified and directed by Engineer-in-Charge.

S&F rotational moulded polyethelene water storage tank triple layered capacity 500 litres 'ISI Marked' cylindrical vertical with closed top hoisted and fixed in position including Dismantling water tanks exc 250 litre but not exceeding 500 litre and removal from site complete all as specified and directed by Engineer-in-charge. Make:- Polywell/Sintex/Rotex.

S&F in repair triple layered rotational moulded polythelene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of 1000 ltr capacity including Dismantling water tanks exc 500 litre but not exceeding 1000 litre and removal from site complete all as spd in SSR complete all as specified and directed by Engineer-in-charge. Make:- Sintex/Rotax/Polywell.

S&F in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 15mm Gun metal gate with iron wheel head screwed for iron pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repair 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

M&L for Cutting of trees including cutting of trunk n.exc 15cm girth and branches and digging out roots from floor or roofs and walls of up to four storied bldg and making good the dismantled portion in cement mortar 1:3 to match the existing surfaces any numbers in area up to 1.5 sqm each complete all as spd. Note :- Any nos of trees/shrubs in area up to 1.5 sqm shall be considered as one unit complete all as specified and directed by Engineer-in-Charge.

Dismantling Cast iron pipe 100 dia incl all fittings of any description and in any position complete all as specified and directed by Engineer-in-Charge.

Dismantling Cast iron pipe 75mm dia incl all fittings of any description and in any position complete all as specified and directed by Engineer-in-Charge.

S&F 100 mm dia sand cast iron soil waste and vent pipe in any length with or with out ear with cement joint fixed to walls complete all as specified and directed by Engineer-in-Charge.

S&F 75 mm dia sand cast iron soil waste and vent pipe in any length with or with out ear with cement joint fixed to walls complete all as specified and directed by Engineer-in-Charge.

Refixing of 100mm dia sand cast iron soil waste & vent pipe in any position complete all as specified and directed by Engineer-in-Charge.

Refixing of 75mm dia sand cast iron soil waste & vent pipe in any position complete all as specified and directed by Engineer-in-Charge.

S&F in repair 75mm dia CI Bends or diminishing pieces or tapers complete all as specified and directed by Engineer-in-Charge.

All same as per ser item No. 60 above but for 75mm dia with oval assess door complete all as specified and directed by Engineer-in-Charge.

S&F in repair Branch pieces,Tee junction with bore of pipe 100 mm, single (equal or unequal), ordinary or inverted, spigot or socket type or with parallel branches with Ovel Access door complete all as specified and directed by Engineer-in-Charge.

S&F in repair Branch pieces, Tee junction with bore of pipe 75 mm, single (equal or unequal), ordinary or inverted, spigot or socket type or with parallel branches with ovel Access door complete all as specified and directed by Engineer-in-Charge.

S&F in repair 16 mm outer dia PE-AL-PE pipe of approved make complete all as specified and directed by Engineer-in-Charge.

S&F in repair 32mm outer dia PE-AL-PE pipe of approved make complete all as specified and directed by Engineer-in-Charge.

S&F in repair 40mm outer dia PE-AL-PE pipe of approved make complete all as specified and directed by Engineer-in-Charge.

S&F in repair brass L-bow / Socket / T of size12x16mm fixed to PE-AL-PE pipe of approved make complete all as specified and directed by Engineer-in-Charge.

S&F in repair brass reducer of size12x16mm to 16x20mm fixed to PE-AL-PE pipe of approved make complete all as specified and directed by Engineer-in-Charge.

S& F in repairs U shaped double aluminium chaneel of size 10 mm x 20 mm x 1.5mm fixed to wooden frame including suitable rail/ rolled etc complete all as specified and directed by Engineer-in-Charge.

M&L for cleaning of all blockages of Nahni traps/floor traps/bottle traps, blockages of WC's, Rain water pipes, Rain water spouts at roof level, 100 mm dia CI pipes upto 1st manhole/GT in shafts, vertical CI soil/waste pipe stacks, CI Tee/door bends etc & cleaning of drain pipes 150 mm to 250 mm internal dia by rodding and manholes upto 3.0 metre in depth and removal of sludge/silt/liquid mud sand (in foul conditions) etc, out of MOD premises (at the location notified by the local Municipal Corporation/Cantt board) complete all as specified and directed by the Engineer-in-Charge to maintain internal & external sewage system in functional state at all the time by engaging/deploying One safaiwala from 0900 hours to 1700 hours at Complaint cell of the area Anuj vihar & vikram vihar officer Md Accn (AGE B/R-I (South) office ) mentioned in the contract on daily basis, with manual/pressure cleaning pump and flexible rods and other necessary equipments (as per rules of public health), including digging required nos of pits for depositing sludge and furture capping the pit with the 25 cm thick layer of soil. complete all as specified and directed by Engineer-in-charge. Notes:- 1. The No of persons indicated in above items as assumed by the department, shall remain present at the complaint cell Anuj vihar & Vikram Vihar officer Md Accn (AGE B/R -I (South). Contractor may have to deploy more manpower in the particular area and deploy adequate sewage cleaning machinary/ equipments to clean the line and open blockages. Rates quoted shall be deemed to have considered all such contingencies. 2. In case of non availability/ absence of any of minimum required tradesmen, the recovery for the same shall be effected at double the minimum fair wages applicable for the relevant category or double the market rates whichever is higher, in addition to non payment of this item for the absence period proportionaly. 3. If necessiated by the Engr-in-charge/GE for work on Sunday/ holidays, the contractor shall provide tradesmen with helpers. 4. Proper records (date wise) of complaints received & rectified by the contractor and attendance register of trademen shall be maintained and shall be produced for verification at the time of payment of each RAR/Bill.

Demolition of brick work / stone boulder measonary built in cement mortar or cement lime mortar of any description and in any position complete all as specified and directed by Engineer-in-Charge.

M&L for brick work using old size bricks of class designation 10, built in cement mortar (1:4), straight or curved on plan, exc 6 metre mean radius complete all as specified and directed by Engineer-in-Charge.

All same as per ser item No. 72 above but except bricks.

M&L for 15mm thick cement plaster cement mortar (1:4) on fair faces of briick or concrete surfaces, finished fair & even without using extra cement, complete all as specified and directed by Engineer-in-Charge.

Demolition and breaking up drain pipes (salt glazed stoneware/ACC/RCC) of 150mm dia set in cement mortar, including removal of waste material upto 500 metre distance at the place notified by the Engineer-in Charge.

M&L for salt glazed stoneware drain pipes 150 mm bore, laid in trenches and jointed in cement mortar (1:4) and tested complete all as specified and directed by Engineer-in-Charge. Make:-PERFECT(Jabalpur), BURN(Jabalpur), DEVRAJ(Gaziabad).

Demolition of cement concrete (unreinforced) of any description, in ground floors and pavings not exceeding 15cm thick complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches in soft/loose soil, not exc 1.5m wide & not exceeding 1.5 metre in depth and getting out complete all as specified and directed by Engineer-in-Charge.

M&L for plain cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in bed to drain pipes of 150 mm bore including packing under and haunching against sides of pipes after they are laid and tested, complete all as specified and directed by Engineer-in-Charge.

Returning, filling in including, spreading, levelling, watering and well ramming in layers n.exc 25cm thick, in soft/loose soil complete all as specified and directed by Engineer-in-Charge.

Removal of excavated surplus soil to a distance not exc 50 metre where directed by Engineer-in-Charge at a level not exc 1.5m above or below the starting point complete all as specified and directed by Engineer-in-Charge.

Extra for forming fair finished drain or channels 30 cm inner girth in cement concrete using cement including forming moulds,mitred/stopped ends etc complete all as specified and directed by Engineer-in-Charge.

M&L for PCC(1:4:8) type D-2 (using 40 mm graded stone aggregate) as in foundation and mass concrete complete all as specified and directed by Engineer-in-Charge.

M&L plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in coping, benching rounded or chamferred on edges includind use and waste of form work complete all as specified and directed by Engineer-in-Charge.

Note:- The contract sum shall be after deducting the amount of Credit shown in Credit Schedule of this Tender.

SABHARWAL CONSTRUCTION CO.

POONAM ENTERPRISES

M/S.M.S.Devi.Const.Co

P R Constructions