Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.7 LAccepted-AOC | ₹23.7 L Quoted ₹24.0 L | L1 | Accepted-AOC Being lowest |
| 2 | L2₹26.0 L+₹2.0 L (8.36%)Rejected-Finance 302 SIDDHIVINAYAK APPT A WING MUMBAI K K MARG JACOB CIRCLE MUMBAI CITY MAHARASHTRA 400 011 | MUMBAI | MAHARASHTRA | 400011 | ₹26.0 L+₹2.0 L (8.36%) | L2 | Rejected-Finance not being L1 |
| 3 | L3₹27.1 L+₹3.2 L (13.2%)Rejected-Finance | ₹27.1 L+₹3.2 L (13.2%) | L3 | Rejected-Finance not being L1 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
16 Nov 2023, 6:00 pmClosed
GE PANAJI
Garrison Engineer Panaji Opposite of Kala Academy St Inez Road Goa 403001
REPAIR MAINT TO ROOF SEEPAGE/LEAKAGE SUNKEN PORTION TREATMENT FALSE CEILING CLEANING OF SERVICE TANK AND REPLACEMENT OF FLOAT VALVED AND CONNECTED ITEMS IN MD OTM ACCN AT 5TTR SRI MDC ETC AND 3TTR DCP POCKET MT COY ETC AT BAMBOLIM UNDER GE PANAJI GOA
2023_MES_622687_1
8108/E8
Open Tender
Civil Works
Item Rate
270 days
GE PANAJI
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GARRISON ENGINEER PANAJI
₹50,000
Yes
30 Dec 2023
11 Oct 2023
18 Nov 2023
11 Oct 2023
16 Nov 2023
25 Oct 2023
11 Oct 2023 - 18 Oct 2023
Amount
Dismantling Asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings complete all as specified and directed.
Dismantling of timber scantling in fillets, rails, posts, rafters,purlins, etc. under 40 sq. cm in section unframed work complete all as specified and directed.
Supply and Fix pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Supply and Fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Supply and Fix Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleat or other connecting plates ( Fe-410-W(Gde-E-250) quality-B complete all as specified and directed.
Material and Labour for Preparation of New steel surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.
Supply only integral water proofing compound complete all as specified and directed.
Disconnecting existing water tanks (exceeding 250 Ltrs not exceeding 500 Ltrs), setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and directed.
Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.(date of cleaning shall be written with white paint on each tank after cleaning) complete all as specified and directed.
Dismantling water tanks and removing to store capacity exceeding 500 Ltr not exceeding 1000 Ltr complete all as specified and directed.
Supply and Fix 500 Ltr capacity Rotational moulded polythene water storage tanks(cylinderical vertical with closed top) hoisted and fixed in position complete all as specified and directed.
Supply and Fix 1000 Ltr capacity Rotational moulded polythene water storage tanks(cylinderical vertical with closed top) hoisted and fixed in position complete all as specified and directed.
Taking down or up steel tubing and connections inculding cleaning for refixing or removal to store 15mm bore complete all as specified and directed.
All as per Item No. 13 above but for 20mm bore
All as per Item No. 13 above but for 25mm bore
Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.
All as per Item No.16 above but for 25mm bore.
Supply and fixing in CPVC 20mm Brass Elbow (3/4 x 1/2) complete all as specified and directed.
Supply and fixing in CPVC 20mm Brass Tee complete all as specified and directed.
Supply and fixing in CPVC 20mm Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed.
Supply and fixing in CPVC 20mm Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and directed.
Supply and fixing in CPVC 25mm Tank Adaptor complete all as specified and directed.
Supply and fixing in CPVC 25mm Ball valve complete all as specified and directed.
Taking up cast iron water mains 80 mm bore (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed.
Taking up cast iron water mains 100 mm bore (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed.
Supply and Fix 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
Supply and Fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
Supply and fix 75 mm PVC(SWR) Bend complete all as specified and directed.
Supply and fix 110mm PVC (SWR) Bend complete all as specified and directed.
Supply and Fix 75 mm PVC (SWR) branch piece, single (single Y) equal or unequal provided with access door complete all as specified and directed.
Supply and Fix 75 mm PVC (SWR) branch piece, double (double Y) equal or unequal provided with access door complete all as specified and directed.
Supply and Fix 110 mm PVC (SWR) branch piece, single (single T) equal or unequal provided with access door complete all as specified and directed.
Supply and Fix 110 mm PVC (SWR) branch piece, double (double Y) equal or unequal provided with access door complete all as specified and directed.
Supply and fix PVC (SWR) vent cowl 75mm Dia complete all as specified and directed.
Supply and fix PVC (SWR) vent cowl 110mm Dia complete all as specified and directed.
Supply and Fix 75 mm PVC (SWR) bends any radius provided with access door complete all as specified and directed.
Supply and Fix 110 mm PVC (SWR) bends any radius provided with access door complete all as specified and directed.
Taking down cement plaster on brick or concrete surface including raking out joints, hacking for key, scrubbing out with water, etc. complete all as specified and directed.
Material and Labour for rendering 15 mm thick on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing in CM 1:4 without using extra cement with using water proofing compound complete all as specified and directed. Note :- Water proofing compound will be measered separately.
Material and Labour for rendering 15 mm thick on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing in CM 1:6 without using extra cement complete all as specified and directed.
Material and Labour for plastering 10 mm thick on brick or concrete surface in CM (1:3) on ceiling to be finished even & smooth without using extra cement complete all as specified and directed.
Material and Labour for two coat of oil bound distemper on plastered surfaces of walls including prepartion of new surfaces and chalk whiting , on plastered surfaces, preparatory to distempering complete all as specified and directed
Material and Labour for Preparation of new plastered surface and applying 3 coats of white wash on ceiling complete all as specified and directed.
Material and Labour for preparation of new plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489-2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over two coat of dmprf white new surface complete all as specified and directed.
Material and Labour for GI wire netting 0.90 mm dia and 12mm mesh lathing to wood or metal studding, joists, etc in walls, ceilings, Stanchions, beams etc inculding all laps, cutting and waste complete all as specified and directed.
Taking down Chowkats or frames with shutters (without taking of shutters from the frame) not exceeding 1.5 Sqm & removing from site complete all as specified and directed.
Removal/Taking out wild growth, plants grown on external surface of building along pipe lines/roof till 4 storey and chemically treating the area/plastering the distrubed/damaged area with cement plaster 15mm thick in CM 1:4 without using extra cement with using 3% water proofing compound (plastering and water proofing compound will be paid separately) complete all as specified and directed.
Supply and fix solid PVC door frames of size 50mm x 47 mm made out of 5 mm thick plain/printed coloured PVC sheet reinforced with MS square tube complete all as specified and directed.
Supply and fix factory made solid panel PVC door shutter 30mm thick (styles) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PCV Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitten in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading & jointed together with solvent cement, complete all as specified and directed.
Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame,complete all as specified and directed.
Supply and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified and directed
Supply and Fix Butt hinges, medium weight cold rolled mild steel and fixed 100mm long fixed complete all as specified and directed.
Supply and Fix Aluminium anodised, barrel tower bolts of extruded section and fixed 200mm long fixed complete all as specified and directed.
Supply and Fix Aluminium handles cast type anodised 150mm long fixed complete all as specified and directed.
Dismantling of ceiling boards any thickness including cover fillets complete all as specified and directed.
Supply and fix anodized aluminium snap grid frame work for false ceiling of grid size 605mm x 605mm with size of main tee 35mm x 25mm x 1.5mm and cross tee 25mm x 25mm x 1.5mm and supporting angle at the end all along the wall 40mm x 25mm x 2mm, hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long with and including 6mm thick Everest designer boards or equivalent fixed or laid/ inserted to aluminium frame work with screws with and surface finish with one coat Apex including preparation of new surface of ceiling complete all as specified directed.
Demolition of cement concrete in below or above ground floor and paving exceeding 15 cm thick (unreinforced) complete all as specified and directed.
Material and Labour for cement concrete 1:5:10 (type E2) using 40 mm graded stone aggregate in sunken floor all as specifed and directed complete all as specified and directed.
Material and Labour for Cement concrete 1:3:6 (type C- 2) using 40mm graded stone aggregate, 75mm thick as in sub base complete all as specified and directed.
Material and Labour for cement concrete1:2:4 (type B1) using 20mm graded stone aggregate, 25mm thick as in flooring etc. complete all as specified and directed.
Material and Labour for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6 complete all as specified and directed.
Supply and Fix in repairs white vitreous china squatting pan orissa pattern of size 580mm x 440 mm, with integral foot rest and P or S trap connection to trap and to flushing pipe front or back inlet including, trap and taking out old WC & connections incl 110mm PVC (SWR) WC connector with lip ring etc complete all as specified and directed.
Supply and Fix PVC valveless, syphonic action type flush tank in repair, white, 10 litre capacity with inlet ball valve, float & handle incl brackets complete high level, flush pipes of PVC 32 mm dia, rubber cones, PVC connection 15 mm size with PTMT nut of length 600 mm etc complete all as specified and directed.
Supply and Fix PVC (SWR) Gully trap 125/110 mm setting & jointing with solvent cement complete all as specified and directed.
Supply and Fix PVC (SWR) floor trap 75 mm dia, plain with grating including jointing with solvent cement complete all as specified and directed.
Demolition of existing water proofing treatment any type from top surface of roof slab and remove the material obtained to low lying area complete all as specified and directed.
Material and Labour for water proofing treatment using 4mm thick APP modified membrane consisting five layer membrane with features as spcified, weighing not less than 4kg per Sqm laid over a coat of cold applied bituminous primer @ 0.4 litres per sqm on surface to provide a layer of APP membrane by torching applications including sealing the over lap while torching with 150mm on ;length side and 100mm wide side as per manufacturer instructions incl joints and change in direction be curved with cement mortar 1:3 mixed with SBR latex @ 200 ml/ bag of cement cured well before laying of membrane and provide a finishing coat with solar reflective bituminous aluminium paint @ 0.1 kg per Sqm complete all as specified and directed.
Material and Labour for rendering 10 mm thick in CM 1:3 on fair faces of brick or concrete surface finished even and smooth without using extra cement and using WPC @ 3% by weight of cement complete all as specified and directed. Note:- Water proofing compound will be measure and paid separated.
the bhimani group of companies
archana enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .