Interior Fit-out and Renovation work for office space of PFRDA at 5th floor Tower-E WTC Nauroji Nagar, New Delhi.

BILL OF QUANTITIES (BOQ) for the Proposed Office Space of PFRDA at WTC, New Delhi

S.No. Sub-Head DSR Amount (in Rs.) NDSR Amount (in Rs.)

2 ELECTRICAL WORKS 85,89,021.91 1,09,99,352.31

3 AUDIO- VIDEO WORKS 0.00 2,42,20,810.00

4 IT & Networking 1,29,25,185.00

4 PLUMBING & FIREFIGHTING WORKS 22,65,555.38 8,94,624.05

5 CIVIL & INTERIOR WORKS 1,30,23,952.78 4,52,85,755.44

FURNITURE (Additional furniture considereing existing

6 furniture. Excluding cost of shifting and repair/ 0.00 2,26,56,844.66

B TOTAL i/c GST 15,27,88,979.00

Digitally signed by AMIT

SINGH 22:32:52 IST

BILL OF QUANTITIES (BOQ) for the Proposed Office Space of PFRDA at WTC, New Delhi

Summary of Civil and Interior Works

S.No. Description of Works Amount

Amount (SR, in Rs.)

2 Masonry & Plaster

3 Paving & Wet Works

4 Partitions & Wall Cladding

7 Finishes & Miscellaneous

GRAND TOTAL (Carried Forward) 5,83,09,708.22

GRAND TOTAL (Carried Forward) 5,83,09,708.22

Digitally signed by AMIT

SINGH 22:32:52 IST

INTERIOR FIT-OUTS for the Proposed Office Space of PFRDA at WTC, New Delhi

S.No. DESCRIPTION UNIT QTY RATE (DSR 2022) AMOUNT MARKET RATE AMOUNT

CIVIL & INTERIOR WORKS

2 MASONRY AND PLASTER

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded

2.1 11.3 stone aggregate) finished with a floating coat of neat cement, including

cement slurry, but excluding the cost of nosing of steps etc. complete.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate SQM 3,050.00 545.00 16,62,250.00

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of

class designation 7.5 in superstructure above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) SQM 370.00 1,018.05 3,76,678.50

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at

every third course of half brick masonry.

CEMENT PLASTER :- 15 mm cement plaster on the rough side of single or

half brick wall of mix.

2.5 13.4 12 mm cement plaster of mix

Reinforced cement concrete work in beams, suspended floors, roofs

having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands,

plain window sills, staircases and spiral stair cases up to floor five level

excluding the cost of centering, shuttering, finishing and reinforcement,

with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

Centering and shuttering including strutting, propping etc. and removal of

2.8 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers SQM 45.00 608.35 27,375.75

Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete above plinth level.

5.22A.4 Hot rolled deformed bars kg 275.00 89.65 24,653.75

POP PUNNING (12mm-15mm) : Providing and fixing Average 12mm to

2.10 MR 15mm thick POP Punning over cement plaster in line & plumb finished SQM 700.00 301.12 2,10,783.06

smooth to receive paint. (Internal surfaces of walls).

Digitally signed by AMIT

SINGH 22:32:52 IST

S.No. DESCRIPTION UNIT QTY RATE (DSR 2022) AMOUNT MARKET RATE AMOUNT

Providing and laying water proofing treatment in sunken portion of WCs,

bathroom etc., by applying cement slurry mixed with water proofing

cement compound consisting of applying : a) First layer of slurry of cement

@ 0.488 kg /sqm mixed with water proofing cement compound @ 0.253

2.11 22.5 layer will be allowed to air cure for 4 hours. b) Second layer of slurry of SQM 35.00 516.60 18,081.00

cement @ 0.242 kg/ sqm mixed with water proofing cement compound @

0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with

water curing for 48 hours. The rate includes preparation of surface,

treatment and sealing of all joints, corners, junctions of pipes and masonry

with polymer mixed slurry.

FOAM CONCRETE FILLING UNDER TOILETS AND PANTRY:- Filling and

compacting Foam Concrete for raising level of toilets and pantry and

2.13 MR finishing in a coat of lean concrete screeding with waterproofing CUM 12.00 5,524.71 66,296.48

compound complete in all respects to take Tile Flooring as per flooring

specifications.

SUB TOTAL OF MASONRY AND PLASTER 23,89,080.89 2,77,079.55

3 PAVING AND WET WORKS

TILE DADO :- Providing and fixing Ist quality ceramic glazed wall tiles

conforming to IS: 15622 (thickness to be specified by the manufacturer), of

approved make, in all colours, shades except burgundy, bottle green,

black of any size as approved by Engineer-in-Charge, in skirting, risers of

steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement :

3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,

including pointing in white cement mixed with pigment of matching shade

Providing and laying Vitrified tiles in floor in different sizes (thickness to be

specified by the manufacturer) with water absorption less than 0.08% and

conforming to IS:15622, of approved brand & manufacturer, in all colours

and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse

3.3 11.41A sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the

joints with white cement and matching pigments etc. The tiles must be cut

with the zero chipping diamond cutter only . Laying of tiles will be done

with the notch trowel, plier, wedge, clips of required thickness, leveling

system and rubber mallet for placing the tiles gently and easily.

b 11.41A.2 Glazed vitrified floor tiles polished finish of size

CERAMIC TILE FLOORING :- Providing and laying rectified Glazed Ceramic

floor tiles of size 300x300 mm or more (thickness to be specified by the

manufacturer), of 1st quality conforming to IS : 15622, of approved make,

3.4 11.40 in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on SQM 35.00 1,225.10 42,878.50

20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with

grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white

cement and matching pigments etc., complete. Digitally signed by AMIT

SINGH 22:32:52 IST

S.No. DESCRIPTION UNIT QTY RATE (DSR 2022) AMOUNT MARKET RATE AMOUNT

Providing and laying Vitrified tiles in different sizes (thickness to be specified

by manufacturer), with water absorption less than 0.08 % and conforming

to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of

steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse

sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the

joint with white cement & matching pigments etc. complete.

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy

grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of

hardener and 0.20 kg of resin per kg), including filling / grouting and

finishing complete as per direction of Engineer-in-charge.

Providing and fixing removable raised/false access flooring with system

and its components of approved make for different plenum height with

possible height adjustment upto 50 mm,comprising of modular load

bearing floor panels supported on G.I. rectangular stinger framework and

G.I. Pedestal etc. all complete, as per the architectural drawings, as

specified and asdirected by Engineer-in-charge consisting of:

(a) Providing at required spacing to form modular framework, pedestals

made out of GI tube of thickness minimum 2 mm and 25 mm outer

diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm x

3mm at the bottom of the pedestal tube, G.I. pedestal head of size

75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer

diameter with two GI

Check nuts screwed on the stud for level adjustment upto 50mm, locking

and stabilizing the pedestal head in position at the required level. The

pedestals shall be fixed to the subfloor (base) through base plate using

epoxy based adhesive of approved make or the machine screw with rawl

(b) Stringers system in all steel construction hot dipped galvanized of

rectangular size 570x20x30x0.80mm thick having holes at both ends for

securing the stringers on to the pedestal head using fully threaded screws

ensuring maximum lateral stability in all directions, the grid

formed by the pedestal and stringer assembly shall receive the floor panel,

this system shall provide adequate solid, rigid support for access floor

panel, the system shall provide a minimum clear uninterrupted clearance

between the bottom of the floor for electrical conduits and wiring etc. all

complete as per the architectural drawings, as specified and as directed

the Engineer-in-charge

Digitally signed by AMIT

SINGH 22:32:52 IST

S.No. DESCRIPTION UNIT QTY RATE (DSR 2022) AMOUNT MARKET RATE AMOUNT

(c) Providing and fixing Access Floor panel of 600x600x32 mm medium

grade Filled Steel anti static high pressure Lamination of 800H grade

(FS800H). Access Floor panel shall be steel welded construction with an

enclosed bottom pan with uniform pattern of 64 hemispherical cones. The

top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7 mm

fused spot welded together (minimum 64 welds in each dome and 20

welds along each flange). The panel should be Corroresist epoxy coated

for lifetime rust protection and cavity formed by the top and bottom plate

is filled with Pyrogrip noncombustible Portland cementitious core mixed

with lightweight foaming compound. The access floor shall be factory

finished with Anti-static High Pressure laminate with Non Warp technology

upto 1mm thickness for superior adhesion and Surface flatness within

0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied

on area 25mm x 25mm without collapse in the centre of the panel which is

placed on four steel blocks. The panel will withstand and Uniformly

Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg

all complete as per the approved manufacturers specification and as per

the direction of Engineer-in-charge. All specification must be printed on

the side of the panel to ensure the quality of the product.

11.54.1 300 mm Finished Floor Height (FFH) SQM 230.00 5,094.08 11,71,638.40

KITCHEN/ PANTRY/ HAND WASH COUNTER :- Providing and fixing pantry

and toilets with Granite stone top (with straight edge polished nosing)

complete with base cabinet made of 20mm BWP board, outside surface

(shutters) finished in 1mm thick Laminate of approved shade. All internal

3.7 MR surfaces to have balancing laminate. The rate inclusive of necessary RMT 8.00 13,084.73 1,04,677.84

hardware, handle lock sets, self closing hinges, spring loaded shutter, latch

inside, all cabinet hardware complete as per Architects approval. (BR of

stone to be taken as Rs 1600/Sqmt). Width of work top counter 600mm/

detailed drawings.

Supply of modular carpet of approved model and shade and made with

100% nylon 6/6.6 tufted textured tiles of minimum 500mm x 500mm in size,

stain resistant, anti microbial, and having colour fastness to water, fastness

to light, rubbing fastness and castor chair suitability as per relevant

standard for heavy commercial usage, with 100% PVC free Wellbac

Function Backing with having average density 6000 oz/cu. yd. or

more,Nominal total thickness of 5.9mm, and Pile weight – 16-18 oz/ sq

yard. Material shall be CRI GREEN LABEL PLUS certified, and shall have

recycled content complying to GRIHA requirement, including fixing with

GRIHA compliant adhesive of approved make, minimum 15 years

manufacturer's warrantee, all complete as per drawings, manufacturer's

specifications and direction of Engineer in Charge

Digitally signed by AMIT

SINGH 22:32:52 IST

S.No. DESCRIPTION UNIT QTY RATE (DSR 2022) AMOUNT MARKET RATE AMOUNT

Providing and Fixing of floor tiles with wear layer is of 0.5mm, made upof

Stone Polymer composite, 100% Water & Termite proof, Scratch/ Flame/ UV

resistant, anti-microbial, 100% recyclable Green product having click

system with suitable skirting. Classification of abrasion resistance (Abrasion

wheelfromH-18 Calibrade, loadApplied 1000 grams, No. of Cycles 14,400).

" ( Along with Matching Profiles)

TOTAL FOR PAVING & WET WORKS 63,45,199.40 21,21,712.15

4 PARTITIONS AND WALL CLADDING

GYPSUM PARTITIONING:- Providing and fixing partition upto ceiling height

consisting of G.I. frame and required board, including providing and fixing

of frame work made of special section power pressed/ roll form G.I. sheet

with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor

and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50

mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to

centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable

anchor fastener or metal screws with nylon plugs and the studs 48 mm

wide having one flange of 34 mm and other flange 36 mm and 0.50 mm

thick fixed vertically within flanges of floor and ceiling channel and placed

at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts,

including fixing of studs along both ends of partition fixed flush to wall with

suitable anchor fastener or metal screws with nylon plugs at spacing of 450

mm centre to centre, and fixing of boards to both side of frame work by 25

mm long dry wall screws on studs, floor and ceiling channels at the

spacing of 300 mm centre to centre.

The boards are to be fixed to the frame work with joints staggered to avoid

through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having

two flanges of 9.5 mm each) to be provided at the horizontal joints of two

boards, fixed to the studs using metal to metal flat head screws, including

jointing and finishing to a flush finish with recommended jointing

compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5

mm), joint finisher and two coats of primer suitable for board as per

manufacture's specification and direction of engineer in charge all

75 mm overall thickness partition with 12.5 mm thick double skin fire rated

Glass Reinforced Gypsum (GRG) plaster board conforming to IS: 2095:

Digitally signed by AMIT

SINGH 22:32:52 IST

S.No. DESCRIPTION UNIT QTY RATE (DSR 2022) AMOUNT MARKET RATE AMOUNT

Gypsum Panelling:-Providing and fixing, in position concealed G.I. section

for wall paneling using board of required thickness fixed on the ‘W’ profile

(0.55 mm thick ) having a knurled web of 51.55 mm and two flanges of 26

mm each with lips of 10.55 mm, placed @ 610 mm C/C in perimeter

channel having one flange of 20 mm and another flange of 30 mm with

thickness of 0.55 mm and web of length 27 mm. Perimeter channel is fixed

on the floor and the ceiling with the nylon sleeves @ 610 mm C/C with fully

threaded self-tapping dry wall screws. Board is fixed to the ‘W’ profile with

25 mm countersunk ribbed head screws @ 200 mm C/C., all complete as

per the drawing & directions of engineer-incharge, the joints of the boards

are finished with specially formulated jointing compound and 48 mm wide

jointing tape to provide seamless finish.

9.133.3 Gypsum board conforming to IS: 2095 Part - I

GLASS PARTITIONING:- Providing & Fixing Full Height Glass partition using

12mm Thk. Glass with anodised Aluminium frame fixing glass with snap on

option consisting of top, bottom and side frame measuring 40-46mm x

18mm-25mm complete with glazing rubber as per manufacturer's

specifications and instructions of Engineer- in-charge. Rate include supply

& Installation of 12 mm thk toughened glass with double sided adhesive

tapes for glass to glass butt joints. Partition system from FFL to False Ceiling

level, inclusive of cost of support required for fixing in the ceiling. The

frame to be powder coated in desired shade as per the instructions of the

PARTITIONING- Partition using 12mm thick, 120mins fire rated ply fixed on

both sides on aluminium Studs Frame 50mm x 50mm x 1.5mm & 50mm x

4.4 MR 60mm x 1.5mm as per approved sample and architectural drawings SQM 1,555.00 4,863.73 75,63,097.06

placing the same 600mm c/c . Aluminuim frame to be fixed to floor and

RCC Ceiling using fastners.

PANELLING- Panelling using 12mm thick, 120mins fire rated ply fixed on one

side on Aluminium Frame 50mm x 25mm x 1.5mm as per approved sample

and architectural drawings. Aluminium frame to be fixed to walls, floor and

RCC Ceiling using fastners.

4.6 MR Cladding using 12mm thick HDHMR board on existing frame/ surface. SQM 10.00 1,148.57 11,485.74

VEENER CLADDING- Providing and Fixing 4.0 mm thick decorative/ Natural

Veneer of approved design and shade , cladded on to existing

partitioning. Complete Cladding to be finished using mellamine polish

(gloss/matt) as approved by the architect. (base rate Rs. 1450/- sqm)

LAMINATE CLADDING- P/F 1mm thick laminate including 4 mm thick MDF,

on an existing Plywood surface.

INSULATION- Providing and fixing thermal insulation with Resin Bonded

rock wool conforming to IS: 8183, having density 48 kg/m3,50 mm

4.9 12.62 thick,wrapped in 200 G Virgin Polythene Bags fixed to wall wirh screw, SQM 1,555.00 277.90 4,32,134.50

rawel plug & washers and held and in position by criss cossing GI wire etc.

complete as per directions of Engineer-in-Charge. Digitally signed by AMIT

SINGH 22:32:52 IST

S.No. DESCRIPTION UNIT QTY RATE (DSR 2022) AMOUNT MARKET RATE AMOUNT

Providing and Fixing Channeled Woodworks perforated panels of width

192mm, thickness of 15mm and length 2400 mm or as specified by the

Architect/ approving engineer, made of a high density fibre board with

minimum 725 Kg/M3 density substrate with a laminated facing as per the

approved shade & finish and a melamine balancing layer on the reverse

side. The boards shall have a special perforation pattern where the visible

surface has a “Helmholtz” fluted perforation of 3mm width and

4.10 MR 5mm/13mm/21mm of visible panel each. The edges of the panels shall be SQM 120.00 4,716.43 5,65,971.04

“tongue-and-grooved” to receive special clips for installation. The back of

the perforated panel shall have sound absorbing non-woven acoustical

fleece having NRC of 0.52-0.63. The panels shall be mounted on special

aluminium splines using clips. The works to be done complete as per

drawings and satisfaction of engineer-in-charge.

Providing and supplying Acoustical Wall Paneling with square edges made

of fibre glass substrate 9 mm thick and wrapped on the front side with an

acoustically transparent and classified for Fire reaction Class A as per ASTM

4.11 MR E-84, fabric as per the selection of the Architect of approved size providing SQM 80.00 5,165.85 4,13,268.22

a minimum sound absorption level of 0.85 NRC to be affixed to wall using

Wall panel impalers and construction adhesives as per the instructions laid

down by the manufacturer.

SHELVES:- Providing and fixing Pre-laminated flat pressed 3 layer (medium

density) particle board or graded wood particle board IS : 3087 marked,

with one side decorative and other side balancing lamination Grade I,

Type II exterior grade IS : 12823 marked, in shelves with screws and fittings

wherever required, edges to be painted with polyurethane primer (fittings

to be paid separately).

Cabinet Carcass- Providing and fixing Pre-laminated flat pressed 3 layer

(medium density) particle board or graded wood particle board IS : 3087

based on marked, with one side decorative and other side balancing lamination

9.18.2 Grade I, Type II exterior grade IS : 12823 marked, in cabinet carcass with

screws and fittings wherever required, edges to be painted with

polyurethane primer (fittings to be paid separately).

Providing & fixing IInd class teak wood lipping 25 mm wide x 12 mm thick

complete with all necessary nails, hardware etc.

Providing and fixing special quality bright finished brass cupboard or ward

4.15 9.79 robe locks with four levers of approved quality including necessary screws

Providing and fixing bright finished brass handles with screws etc.

Digitally signed by AMIT

SINGH 22:32:52 IST

S.No. DESCRIPTION UNIT QTY RATE (DSR 2022) AMOUNT MARKET RATE AMOUNT

SHUTTERS:- Providing and fixing cup board shutters 25 mm thick, with Pre-

laminated flat pressed three layer particle board or graded wood particle

board IS:12823 marked, exterior grade (Grade l Type ll), having one side

4.17 9.129 decorative lamination and other side balancing lamination, including IInd SQM 20.00 1,982.70 39,654.00

class teak wood lipping of 25 mm wide x12 mm thick with necessary screws

and bright finished stainless steel piano hinges, complete as per direction

of the Engineer-in-Charge

STORAGE CABINET FOR ELECTRICAL PANEL AND VOLTAGE STABLIZERS-

Cabinet Shutters out of 19mm Commercial Plybaord finished in 1mm

Laminate of base cost Rs. 380 per sqmt. Shutters to be fixed to a frame.

Rigidly fixed on both sides and top finshed in laminate. No internal carcass

required. All Hinges of hettich or equivalent. Internal Surface of the shutter

in balancing white laminate. All shutters to be provided with Stainless steel

louvers at the top and bottom of the shutter as per the site requirements

and instrcution of the Engineer In charge.

SUB TOTAL OF PARTITIONS AND WALL CLADDING 5,92,024.25 2,05,20,827.32

GYPBOARD CEILING :- Providing and fixing false ceiling at all height

including providing and fixing of frame work made of special sections,

power pressed from M.S. sheets and galvanized with zinc coating of 120

gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats

of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at

1200 mm centre to centre, one flange fixed to the ceiling with dash

fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of

cleat fixed to the angle hangers of 25x10x0.50 mm of required length with

5.1 12.45 nuts & bolts of required size and other end of angle hanger fixed with

intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200

mm centre to centre, to which the ceiling section 0.5 mm thick bottom

wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5

mm, at 450 mm centre to centre, shall be fixed in a direction

perpendicular to G.I. intermediate channel with connecting clips made

out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including

fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20

mm and 30 mm long.

Including jointing and finishing to a flush finish of tapered and square

edges of the board with recommended jointing compound , jointing

tapes , finishing with jointing compound in 3 layers covering upto 150 mm

on both sides of joint and two coats of primer suitable for board, all as per

manufacturer's specification and also including the cost of making

openings for light fittings, grills, diffusers, cutouts made with frame of

perimeter channels suitably fixed, all complete as per drawings,

specification and direction of the Engineer in Charge but excluding the

cost of painting with :

Digitally signed by AMIT

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095-

SINGH 22:32:52 IST

S.No. DESCRIPTION UNIT QTY RATE (DSR 2022) AMOUNT MARKET RATE AMOUNT

300MM X 1200MM MINERAL FIBRE GRID - Providing and fixing of mineral

fiber ceiling tiles, with hot dipped galvanized steel grid work (Silhotte) ,

surface chemically cleaned capping pre-finished in baked polyester paint,

Main Tees of size 38 (H) x 15 mm every 1.2M centre to centre, centre to

centre to form a grid of size 1200 X 300 mm and suspending the grid from

RCC roof using 3 mm GI rod, 6 mm nylon rawl plug and 6mm J bolt at

every 1200 mm intervals. And laying mineral fiber Acoustic ceiling tiles MV

B-Pin of size 1200 x 300 x 20 OCR mm over the formed grid having fire

rating of 60 minutes as per BS 47G / 23 of 1987. Light Reflection of > 85%.

Noise Reduction Coefficient (NRC) of 0.70, Sound Attenuation of 32 db, K =

0.52-0.57 W/mk. Humidity Resistance up to 99% at 50’C. The grid to be used

is Silhoutte type as per approval of the architect

TRAP DOOR :- Providing and fixing trap door in false ceiling made of

"Novapan "pre-laminated board with hardwood framing, dead locks,

lapping all around including all hardware, hinges etc. complete as per

design and drawing.

CEILING PELMETS :- Providing and fixed pelmet of overall size

150mmx150mm and made hardwood framings hung from ceiling

5.5 MR @1000mm centre to centre with 2 nos of 6mm thk. Commercial ply on RMT 120.00 1,022.47 1,22,696.46

vertical & 12mm thk. Commercial ply on horizontal surface (straight &

curved). Inclusive of finishing in Paint.

WOODEN VENEER CEILING :- Providing and fixing wooden veneer ceiling

by Fixing Natural Teak Veneer on 12mm Underlay commercial Ply fixed to

a subframe made using 50mm X 50mm Kiln seasoned and chmeically

5.6 MR treated hollock wood fixed to RCC ceiilng using Fastners . The cost to SQM 92.00 6,600.48 6,07,244.24

inlcude the finishing of the Veneer using wood stain and clear coat of PU

(Gloss/ Matt) as per the instructions of the Engineer In Charge. (base rate

Rs. 1450/- sqm)

Providing the gypsum double sided cove of 150mm x 150mm having a

facia of 75mm to macth the specifications same as gypsum ceiling.

Providing the gypsum single sided cove of 150mm x 150mm having a facia

of 75mm to macth the specifications same as gypsum ceiling.

Providing the wooden cove of 150mm x 150mm having a facia of 75mm

to macth the specifications same as above

GYPSUM BOARD VERTICAL BAND- upto100mm high gypsum band all round

the mineral fibre/ gypsum ceiling. In order to make the Mineral Fiber/

5.9 MR gypsum ceiling higher than the Gypsum Ceiling by upto 100mm as per RMT 435.00 356.09 1,54,898.23

drawings. (visible surface of gypsum band to not exceed 100mm)

including plastic emulsion paint.

Digitally signed by AMIT

SINGH 22:32:52 IST

S.No. DESCRIPTION UNIT QTY RATE (DSR 2022) AMOUNT MARKET RATE AMOUNT

Providing and fixing of Triangular Box ceiling of approved manufactured

from light weight G.I and folded into u shape profiles. Each panel has a

nominal cell wall thickness of 15 mm to give a precise engineeredceiling

appearance. It has a width of 15mm and height 60mm. Maximum length

available is 2 mtr and its thickness 0.45 in G.I. It has equilateral triangles

having each side length 175mm. It allows fire detection and controlsystem,

air conditioning and other services to be located within the ceiling void. all

complete as approved & directed by Engineerin-Charge.

Providing of Baffle ceiling system comprises of 50 mm x 100 mm (50 mm

width & 100 mm Height) U Shape panels in wooden finish. Panels shall be

made of 0.5 mm thick galvanized steel after Powder-coated and length

up to 4000 mm. Panel shall be high corrosion resistance and good color

stability. Centre to Centre panel gap will be 100 mm. Panels are fixed on to

roll formed carriers 20 mm wide x 40 mm deep out of 0.80 mm G.I sheet

MR Powder-coated color with cutouts to hold the panels in module of 50 mm SQM 157.00 9,171.68 14,39,954.37

at maximum 1200 m c/c. Carriers are suspended from the roof or truss by 6

mm dia. galvanized steel wire rod hanger with special height adjustment

suspension clip at max. 1200 mm c/c. Hangers are fixed to the roof by ‘J’

hooks or ceiling brackets and nylon inserts. Panels are factory cut in

lengths up to maximum 4.0 m to suit site dimensions or shop drawings. Top

cap and side cap are used to cover the edges of the panels.

Supply: Loop Type 2 system formed as an open metal ceiling with an open

area of more than 50% and to the flare [5mm] of the perforation pattern

[RV-50-40] the ceiling has a three-dimensional visual effect and hides the

insight into the plenum. Bypassing the perforation, the S-shaped sides of

the LOOP interlock both the long and front side joint with a non magnetic

suspension, the elements are installed with a circumferential 1 mm joint,

thus compensating tolerances in x and y direction. The non-magnetic

suspension system effectuates a self-alignment of the elements [puzzle

effect]. The module size 966x1115x1.0mm GMS is perforated with 60mm

deep drawn holes .The substructure consists of a form perforated L profile

[U1040] as a lateral grid which is suspended from the ceiling with nonius

adjustable upper and lower parts or with threaded rods using official

approved dowel plugs. The grid profiles are to be connected together at

the ends by means of longitudinal connectors [U 1041] [screw fasteners].

The spacing of the grid profile is according to the requirements of DIN EN

13964. On profiles angles, C-band raster as secondary profiles are bolted

on by means of C channel hanger bracket with M6 bolts. Only

construction parts approved by the manufacturer may be used. Provide

necessary supports, provisions as per the architects Instructions. Tolerances

according to TAIM, DIN EN 13964 and quality controlled to ISO 9001:2008

approved by TUV.Finish of ceiling is in RAL 9016 white/ RAL 9006 Silver grey

powder coated with minimum 60 microns paint thickness.

Digitally signed by AMIT

SINGH 22:32:52 IST

S.No. DESCRIPTION UNIT QTY RATE (DSR 2022) AMOUNT MARKET RATE AMOUNT

SUB TOTAL OF CEILING 30,63,124.35 1,04,95,865.48

6 DOORS/ WINDOWS

35MM THICK LAMINATED FLUSH DOOR WITH FLOOR SPRING- 35mm thick

flush Doors finished using 1mm Thick Highland Pine Laminate on both sides

panel of size upto 2400mm x 1050mm complete with Hardware including

floor spring, Door Closer, dead Lock with inbuilt key, D-Handle etc.

including cost of teak lipping all around with melamine/ duco finish. The

item to include installation of all kinds of latches as per the requirement.

35MM THICK LAMINATED SLIDING DOOR - 35mm thick flush Doors finished

using 1mm Thick Highland Pine Laminate on both sides panel of size upto

2400mm x 1050mm complete with Hardware including soft close sliding

rail, Lock with inbuilt key, Handle etc. including cost of teak lipping all

around with melamine/ duco finish. The item to include installation of all

kinds of latches as per the requirement.

Supply & Installation of Single leaf anodized aluminium profile door frame

of section 45-50 mm x 20-25mm with a set of Pivot hinges with FS nut at top

& bottom & Single Leaf Glazed shutter of 10mm thick Toughened glass &

Hard wares like H type pull handle handle 25mmx450mm , Half moon door

stopper , bottom corner lock & Floor machine for self closing complete

with required accessories.As the door is frameless, the edges will be visible

Size Considered 900 x 2400mm.

DOOR FRAMES- Providing wood work in frames of doors, windows,

clerestory windows and other frames, wrought framed and fixed in position

with hold fast lugs or with dash fasteners of required dia & length ( hold fast

lugs or dash fastener shall be paid for separately).

9.1.1 Second class teak wood CUM 1.26 1,31,576.95 1,65,786.96

FLUSH DOOR:- Providing and fixing ISI marked flush door shutters

conforming to IS : 2202 (Part I) non-decorative type, core of block board

6.3 9.21 construction with frame of 1st class hard wood and well matched

commercial 3 ply veneering with vertical grains or cross bands and face

veneers on both faces of shutters :

35 mm thick including ISI marked Stainless Steel butt hinges with necessary

Extra for Providing and fixing flush doors with decorative veneering instead

6.4 9.22 of non decorative ISI marked flush door shutters conforming to IS: 2202

Extra for providing lipping with 2nd class teak wood battens 25 mm

6.4 9.23 minimum depth on all edges of flush door shutters (over all area of door SQM 62.00 401.40 24,886.80

shutter to be measured)

Providing and fixing wooden moulded beading to door and window

6.5 9.40 frames with iron screws, plugs and priming coat on unexposed surface etc.

Digitally signed by AMIT

2nd class teak wood

14,830.40 SINGH

SINGH 22:32:52 IST

S.No. DESCRIPTION UNIT QTY RATE (DSR 2022) AMOUNT MARKET RATE AMOUNT

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame

with 10 mm diameter bolts, nuts and wooden plugs and embedding in

cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand :

6 graded stone aggregate 20mm nominal size).

DOOR CLOSERS:- Providing and fixing aluminium extruded section body

tubular type universal hydraulic door closer (having brand logo with ISI, IS :

6.8 9.84 3564, embossed on the body, door weight upto 36 kg to 80 kg and door EACH 12.00 856.30 10,275.60

width from 701 mm to 1000 mm), with double speed adjustment with

necessary accessories and screws etc. complete.

MORTICE LOCK AND LEVER HANDLES- Providing and installing Tubular

Handle TH 123 with Roses & Escutcheon in SS packaged with Mortice

lockset 55mm backset, 20 SS forend, SS strike plate and EP Cylinder for all

TOWER BOLTS:- Providing and fixing aluminium tower bolts, ISI marked,

6.11 9.97 anodised (anodic AC 10 as per IS : 1868 ), transparent or dyed to required

colour or shade, complete:

DOOR STOPPER:- Providing and fixing bright finished brass hanging type

floor door stopper with necessary screws, etc. complete.

FIRE DOOR- Providing and fixing single leaf 120min Rated Fire Door of size

900x2400. with vision panel using wired glass complete with Fire proof door

frame. One side to be finished in fire retardant paint and one side to be

finished in Laminate of approved shade. All Frame to be finished in fire

retardant paint. All hinges and hardware to be thermatically sealed and

120 mins fire rated.

Providing and fixing 12 mm thick frameless toughened glass door

shutter of approved brand and manufacture, including providing

6.16 21.18 and fixing top & bottom pivot & spring type fixing arrangement and SQM 2.40 4,540.70 10,897.68

making necessary holes etc. for fixing required door fittings, all mplete

as per direction of Engineer- incharge.

Providing and fixing of openable wall partition system inclusing all

acessories complete as per direction of Engineer- incharge.

SUB TOTAL OF DOORS 3,91,182.04 54,76,074.95

7 FINISHES & MISCELLANEOUS

PRIMER: Applying one coat of water thinnable cement primer of approved

brand and manufacture on wall surface. Water thinnable cement primer.

ACRYLIC EMULSION PAINT: Painting of wall, ceiling, POP/ plastered,

Gyspum etc. surfaces with smooth and even finish velvet touch paint of

7.2 MR approved brand and manufacture to give an even shade. Two or more SQM 3,373.00 234.79 7,91,938.81

coats on new work complete to the satisfaction of the Engineer- in -charge

complete with the preparation of the base etc.

Digitally signed by AMIT

SINGH 22:32:52 IST

S.No. DESCRIPTION UNIT QTY RATE (DSR 2022) AMOUNT MARKET RATE AMOUNT

Steel work welded in built up sections / framed work, including cutting,

7.3 10.25 hoisting, fixing in position and applying a priming coat of approved steel

primer using structural steel etc. as required.

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar

Painting with synthetic enamel paint of approved brand and manufacture

to give an even shade:

13.61.1 Two or more coats on new work

Providing & fixing imported decorative Poly décor fabric Wall Paper

(on walls and ceiling) of weight 475 g /sqm as per approved shade &

design including prepration of surface with 2 coats of Nubin Glue based

HONEYCOMB BLINDS -Original Non-woven honeycomb shades having soft

fabric appearance and high energy-efficient fabric with high tear strength

constructed out of Anti static, anti-UV, damp proof, resilient, colour fast &

Sanitized Treat 100% spun bonded non-woven polyester fibre & precision

manufacture to form a hexagonally shaped cell . Cell size 3⁄4”Honeycomb

structure with dis􀆟nct air pocket for energy efficiency and increased

insula􀆟on. Shadings are single tone facing both exterior and interior .Being

a Low shading co-efficient will have following Comfort rating & solar

optical properties. Aluminium profile should have temper WP consisting of

alloy 63400 along with anodizing of 10 micron and powder coating of 60

micron. The tensile strenghth of profile should be 9.10 Kg/mm square and

elongation 18.The control clutch drive unit engineered heavy duty chain

drive pulley operating system consisting of gear clutch housing and

locking plug containing minimum 6 ribs and inserted at minimum of 38mm

7.6 M.R. into roller tube. It is self-lubricating Exclusive clutch with safety pins for SQM 75.00 4,221.61 3,16,620.40

secure bracket installation and unlocking pin for quick manual removal.

Universal clutch is most convenient for large windows down to the smallest

windows. It shall be driven by a ball chain pulley with ball chain and can

be positioned at Right hand or Left hand side of the shade. Clutch gear

ratio of 1.75:1 for reduced operating force on larger blinds.. Mounting

hardware brackets universal brackets including end plug bracket with lock

down retainer device. Brackets finish of powder coated metal installation

brackets made of stamped and hardened steel. Roller tube circular-

shaped aluminium tube extruded from alloy 63400 and temper WP. Bottom

rail flat-shaped extruded aluminium from alloy 63400 and temper WP. Ball

chain shall be 2mm diameter cord with plastic balls moulded to form an

endless ball chain. It is used for raising or lowering action of the shades.

Plastic parts all plastic components are UVstable compounds available

Digitally signed by AMIT

SINGH 22:32:52 IST

S.No. DESCRIPTION UNIT QTY RATE (DSR 2022) AMOUNT MARKET RATE AMOUNT

ZEBRA BLINDS - 190g/sqm, thickness - 0.50 mm - 0.70mm ( opaue part ),

Colorfastness to light - above 4 grade. Blind tube is made of Aluminum

with a diameter of 36mm, botom rail is made of Aluminumwith powder

coated having weight 390 gm/meter fitted with end caps in colour

matching to thefabric and mechanism is of plastic with chain and metal

bracket. The Blinds comes with Aluminum cover with the matching fabric

designed on it. Aluminium profile should have temper WP consisting of

alloy 63400 along with anodizing of 10 micron and powder coating of 60

micron. The tensile strenghth of profile should be 9.10 Kg/mm square and

elongation 18.The control clutch driveunit engineered heavy duty chain

drive pulley operating system consisting of gear clutch housing and

locking plug containing minimum 6 ribs and inserted at minimum of 38mm

into roller tube. It is self-lubricating Exclusive clutch with safety pins for

7.7 M.R. secure bracket installation and unlocking pin for quick manual removal. SQM 50.00 3,517.15 1,75,857.32

Universal clutch is most convenient for large windows down to the smallest

windows. It shall be driven by a ball chain pulley with ball chain and can

be positioned at Right hand or Left hand side of the shade. Clutch gear

ratio of 1.75:1 for reduced operating force on larger blinds.. Mounting

hardware brackets universal brackets including end plug bracket with lock

down retainer device.Brackets finish of powder coated metal installation

brackets made of stamped and hardened steel. Roller tube circular-

shaped aluminium tube extruded from alloy 63400 and temper WP. Bottom

rail flat-shaped extruded aluminium from alloy 63400 and temper WP. Ball

chain shall be 2mm diameter cord with plastic balls moulded to form an

endless ball chain. It is used for raising or lowering action of the shades.

Plastic parts all plastic components are UV-stable compounds available

Digitally signed by AMIT

SINGH 22:32:52 IST

S.No. DESCRIPTION UNIT QTY RATE (DSR 2022) AMOUNT MARKET RATE AMOUNT

ROLLER BLINDS - Providing and fixing of Roller Blind of sturdy aluminium top

tube of 38mm diameter, powder coated bottom bar, with suitable roller

clutch mechanism and plastic ball chain. The Roller Blind fabric should

possess the below mentioned specifications with fabric made up of 85%

Polyester and 15% Catonic Polyester. Roller blinds with Solar protection

tenacity Polyester Yarn & Fungi static Treatment and should block the light

flux & offer elimination of glare and sunlight / heat radiance. Fabric shall

have visible light & solar properties. 1st weave of thickness 0.32mm ±5%

(ISO 2286-2) and weighing 210g/sm±5%. Flame Retardancy as per AS301.3-

1999. Fabric Protected by teflon fabric protector for water and stain

resitance. Harmful substance standard Oeko-tex standard 100.

Constrruction of fabric 16.5+1_ Warp and end/cm 17.5+_1 (fill). Aluminium

profile should have temper WP consisting of alloy 63400 along with

anodizing of 10 micron and powder coating of 60 micron. The tensile

7.8 MR strenghth of profile should be 9.10 Kg/mm square and elongation 18.The SQM 160.00 1,730.25 2,76,839.32

control clutch drive unit engineered heavy duty chain drive pulley

operating system consisting of gear clutch housing and locking plug

containing minimum 6 ribs and inserted at minimum of 38mm into roller

tube. It is self-lubricating Exclusive clutch with safety pins for secure bracket

installation and unlocking pin for quick manual removal. Universal clutch is

most convenient for large windows down to the smallest windows. It shall

be driven by a ball chain pulley with ball chain and can be positioned at

Right hand or Left hand side of the shade. Clutch gear ratio of 1.75:1 for

reduced operating force on larger blinds.. Mounting hardware brackets

universal brackets including end plug bracket with lock down retainer

device. Brackets finish of powder coated metal installation brackets made

of stamped and hardened steel. Roller tube circular-shaped aluminium

tube extruded from alloy 63400 and temper WP. Bottom rail flat-shaped

extruded aluminium from alloy 63400 and temper WP. Ball chain shall be

2mm diameter cord with plastic balls moulded to form an endless ball

FROSTEDFILM(CRYSTALQUALITY):-Providing and fixing scotchcal over glass

7.9 M.R. surface with 15 yrs MCS warranty as approval of the Architect. (Only film SQM 112.00 2,094.59 2,34,593.85

surface area shall be measured and paid).

Supply and installation of Perforated Window Graphic Film , 4-mil, opaque,

cast vinyl film with a high gloss finish allowing the full graphic image to be

seen on one side and still allowing viewing through the window from the

other side with Continuous, non-perforated liner, White on the outside

facing image side, black on the see-through reverse side. The Film shall be

self adhesive with Pressure-sensitive adhesive which shall be Removable

with heat. The film shall be installed with approved artwork digitally

reproduced with water-based inks certified to have no hazardous air

pollutants. Self-adhesive, bubble-free installation to be done on a smooth,

dust free putty surface that has a coat of oil-based primer, by Authorized

Installers only. The film shall be tested against ASTM E84 reports: 8170 for

flamability standards. Certificate of image license and Interior E- Warranty

for a period of 36 months. The work shall be carried out as per guidance

and instructions received from Engineer/Architect incharge. Digitally signed by AMIT

SINGH 22:32:52 IST

S.No. DESCRIPTION UNIT QTY RATE (DSR 2022) AMOUNT MARKET RATE AMOUNT

Reception Table:-Providing & Installation of Reception table of of size upto

3.0m x 0.75m x 0.75m/ 1.2m (ht), made out of 19mm thk. Commercial

Board finished in Acrylic Solid Surface of approved shade and colors

7.11 M.R. complete as per design. One (1) number Drawer pedestal with 3 lockable Nos. 2.00 2,45,000.00 4,90,000.00

drawers and channels (all hardware from Hettich) to be provided under

the table to be finished in Solid Acrylic surface. All visible surfaces to be

finished using Acrylic solid surface as per details.

Conference Table - Providing & Installation of Custom made 'U' shaped

Board Room Table complete as per design having straight/curved edges

out of the overall size of upto length 13.0 m, ht . 0.75m, width 2.4 m, in

19mm thk. Commercial Board base finished in 1mm thick laminate as per

design and shade. Table top to be made in 19mm thick commercial

board and finished in 6 mm thick acrylic solid surface of approved pattern

and shade having edge of 50-75mm thick tapered edge on all sides. Legs

of the table to be upto 150mm x 150mm (Numbers as per design) made in

18mm thick commercial ply cladded in laminte to match the table finish

and hollow for taking the wires upto the table and a 19mm Thk

Commercial board Raceway (150 x 150 ) below table top to be provided

for carriage of cables. All surfaces to be finished in 1mm thick laminte of

approved shade and pattern. The cost to include making of cut outs

necessary for electricity pop up boxes. All veneer surfaces to be finsihed in

Providing and fixing of 4,6 mm thick annealed GRIHA rated lacquered

glass manufactured industrially by curtain coating process with PU lacquer

(50 micron thick), opaque (if viewed against a support wall) conforming to

EN 16477 standards for back painted glass , of approved color by

Architect/ Client fixed with compatible Silicone having Shear Bond

Strength (Dry, 24 hours), greater than 450 kpa and tack free time of 10 to 30

mins compatible for installation of mirror and lacquered glass / Foam

based double sided adhesive tape for instantaneous adhesion,

compatible with mirror and lacquered glass having Shear bond strength

(Dry, 15 mins) of 250 to 350 kpa) on a perfectly leveled 12mm thick water

proof marine plywood / MDF / Mineral fibre board which is mounted on

the RCC wall/any other structure. The contractor should submit test reports

for backpainted glass from manufacturer - High humidity Resistance

(conforms to BS EN 1036 1999); Color fastness ISO 105B02 standard &

Mechanical Resistance ISO 7784 ( Taber Abrasion test ) ISO 2409 ( Cross

Hatch Test ) standard The manufactured backpainted glass should be

environmentally friendly (no lead, no arsenic, no copper,

noformaldehyde); appropriate recycled content (12% post industrial / 6%

post consumer); compressive strenght (1000 MPa) & tensile strenght (40

MPa),same as float glass

Digitally signed by AMIT

SINGH 22:32:52 IST

S.No. DESCRIPTION UNIT QTY RATE (DSR 2022) AMOUNT MARKET RATE AMOUNT

Preparation of complete set of shop drawings including finishing, MEP

services, details, design calcualtions etc. and any other details as and

7.14 M.R. when desired by Engineer In charge /client. A qualified professsional for 1.00 10,00,000.00 10,00,000.00

the purpose shall be appointed after due appproval from Engineer In

Providing & fixing 12mm Thick. 100% Acrylic solid surface of approved

make and colour using approved Adhesive to 12 mm thk. Waterproof

Plywood of approved brand as per shape, pattern & details given in the

drawing. The rate includes providing & fixing beading, cutting, scaffolding,

nails, all materials, labour, lead, lifts, HOM etc., complete.-for Lift Cladding.

(The make, Shade, pattern etc., to be approved by Architect).

STORAGE CABINET FOR GENERAL STORAGE- Out of 19mm Commecial Ply

Board finished using 4mm thick veneer nd polished in melamine to match

the veneer cladding item. The venner to be same as the venner cladding

under separate sub- head above complete with all hinges, drawer glides

7.16 M.R. and hardware from Hettich or equivalent. All internal surfaces to be SQM 95.00 9,653.47 9,17,080.10

completed using balancing laminate. Including brass D-type handles for

shutters and recessed type handles for drawers. Storage to be of all heights

as per design. Storage shutters to be made in solid veneer/ glass as per

design and drawings.

SUB TOTAL OF FINISHES 2,43,341.85 63,94,196.00

Digitally signed by AMIT

SINGH 22:32:52 IST

BILL OF QUANTITIES (BOQ) for the Proposed Office Space of PFRDA at WTC, New Delhi

Sno. Item Specifications Qty Rate Amount Reference Image

Providingin place of main table with overall size of table 2100 x 2250 x 750mm. The main table shall be of size 2100 x 1050 x

750mm. The side unit shall be 1200 x 500 x 750mm. The table is made of 25 mm thick MDF – one side pre-laminate board

confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. Soft closing access flap within-build power box

are provided on work surface for wire management. The ERU top is made of 25 mm thick MDF one side pre-laminate board

confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is made of 25 mm thick MDF

one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure

is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm

thick PVC lipping. The pedestal is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade

edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25 mm thickf profile should be 9.10 Kg/mm

square and elongation 18.The control clutch drive unit engineered heavy duty chain drive pulley operating system

consisting of gear clutch housing and locking plug containing minimum 6 ribs and inserted at minimum of 38mm into roller

tube. It is self-lubricating Exclusive clutch with safety pins for secure bracket ins

The Back Unit shall be of dimensions 1800 x 500 x 750mm. It shall be made of 25mm thick MDF – one side pre-laminate board

confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. The Slide door unit is made of 25 mm thick Pre-

2 Back Unit laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. Shutters Each 6 62,809.05 3,76,854.31

have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Storage is provided with lock for

The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass filled nylon &

upholstered using Quilted knitted fabric. Seat Size:- 47cm(w) × 51.5cm (D). The HR polyurathene foam is moulded with

density =45+/-2 kg/m cube and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down

adjustment of 8.0 ± 0.5cm which is provided in armrest structure. Armrest structure is chrome plated and fitted with an

armrest top. It shall have Front pivot synchro mechanism with following features. 360 degree revolving type, Single point

control, front fivot tilt, tilt tension adjustment, 4 position locking with anti- shock feature, seat/back tilting ration of 1:2. The

3 Main Chair lumber support consists of polypropylene pad with mouled polyurathene foam & covered with polyester fabric. The height Each 6 21,097.24 1,26,583.46

of lumber pad can be adjusted through two projecting knobs provided on the rear side of the pad. Lumber pad has an

adjustment of 8.0± 0.5 cm in height. The pneumatic height adjustment has an adjustment stroke of 10cm. The pedestal is

fabricated from 0.2cm thick HR sheet chrome plated and assembled with injection moulded moulded black polypropylene

hub cap. the work shall be carried out as per guidance and instructions recieved from Engineer Incharge. This shall come

along a headrest assembly consisting of polypropylene pad with lumbr support and covered with polyester fabric. Neckrest

assembly has an adjustment stroke of 4.2cm and otation adjustment stroke of 76 degrees.

The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass filled nylon &

upholstered using Quilted knitted fabric. Seat Size:- 47cm(w) × 51.5cm (D). The HR polyurathene foam is moulded with

density =45+/-2 kg/m cube and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down

adjustment of 8.0 ± 0.5cm which is provided in armrest structure. Armrest structure is chrome plated and fitted with an

armrest top. It shall have Front pivot synchro mechanism with following features. 360 degree revolving type, Single point

4 Visitor Chair control, front fivot tilt, tilt tension adjustment, 4 position locking with anti- shock feature, seat/back tilting ration of 1:2. The Each 18 19,690.92 3,54,436.55

lumber support consists of polypropylene pad with mouled polyurathene foam & covered with polyester fabric. The height

of lumber pad can be adjusted through two projecting knobs provided on the rear side of the pad. Lumber pad has an

adjustment of 8.0± 0.5 cm in height. The pneumatic height adjustment has an adjustment stroke of 10cm. The pedestal is

fabricated from 0.2cm thick HR sheet chrome plated and assembled with injection moulded moulded black polypropylene

hub cap. the work shall be carried out as per guidance and instructions recieved from Engineer Incharge.

Supplying and Placing in place of 2 seater sofa. The overall dimensions of the sofa shall be 1460W x 905D x 855H. The seat

should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density

32 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam

with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with

fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be

resistance and termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos.

per seat and 3.8mm dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It should be a welded

assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap.

Supplying and Placing in place of 1 seater sofa. The overall dimensions of the sofa shall be 1460W x 905D x 855H. The seat

should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density

32 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam

with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with

fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be

resistance and termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos.

per seat and 3.8mm dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It should be a welded

assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap.

Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with

7 Center Table understructure. It shall be a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions Each 6 17,943.74 1,07,662.44

of table shall be Width of table= 112.0 cm, Depth=60.0 cm, height=35.1 cm.

Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with

8 ST understructure. It shall be a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions Each 6 12,194.50 73,166.99

of table shall be Width of table= 60.0 cm, Depth=60.0 cm, height=35.1 cm.

Providing and placing panel & tile based modular workstation, with partition thickness as 52.4 mm thk and ht -

1200 including powder coated aluminium trims. Tiles: Combination of top tiles are fabric magnetic/fabric/fabric

tackable/white board/glass writing board/ clear glass tile/ plain metal/ prelam tile. Bottom tiles - Plain metal/ fabric

magnetic / fabric / laminated /prelam. The panel thickness comprises of 38mm (35 mm Minimum) thick paper honeycomb

+ 3mm MDF on each sides + 0.6mm decorative laminate or fabric on both sides. The uprights and horizontals shall be made

workstation L of aluminium extrusion having average wall thickness of 1.2 mm & powder coated with epoxy- polyester powder.

9 shape 1500 x Particle board framing is used on outer boundary of these blocks as well as intermediately at certain locations forming Each 90 72,493.62 65,24,425.67

1500 conduit for passing cables. These blocks are located in the mid segment of the panels and can be provided with

cutouts for mounting switch boxes (above or below the worktops). Top tiles can be offered in variety of combinations. The

fins along the depth shall be 22.8mm thick. Worksurface- out of 25 mm thk prelam particle board with flat pvc lipping edge

banding of size 1500mm W1 x 1500mm W2 x 750D x 750H. Brackets shall be made from 2mm thick CRCA steel. Pedestals

with legs - Nova pedestal flat metal front, free standing central locking of size 390 mm w x 435 mm d x 646 mm height 3dr

= 2box+1file. The work shall be carried out as per the instructions and guidance received from engineer incharge.

Providing and placing panel & tile based modular workstation, with partition thickness as 52.4 mm thk and ht -

1200 including powder coated aluminium trims. Tiles: Combination of top tiles are fabric magnetic/fabric/fabric

tackable/white board/glass writing board/ clear glass tile/ plain metal/ prelam tile. Bottom tiles - Plain metal/ fabric

magnetic / fabric / laminated /prelam. The panel thickness comprises of 38mm (35 mm Minimum) thick paper honeycomb

+ 3mm MDF on each sides + 0.6mm decorative laminate or fabric on both sides. The uprights and horizontals shall be made

of aluminium extrusion having average wall thickness of 1.2 mm & powder coated with epoxy- polyester powder.

10 Particle board framing is used on outer boundary of these blocks as well as intermediately at certain locations forming Each 41 62,968.75 25,81,718.87

conduit for passing cables. These blocks are located in the mid segment of the panels and can be provided with

cutouts for mounting switch boxes (above or below the worktops). Top tiles can be offered in variety of combinations. The

fins along the depth shall be 22.8mm thick. Worksurface- out of 25 mm thk prelam particle board with flat pvc lipping edge

banding of size 1200mm x 600mm x 750H. Brackets shall be made from 2mm thick CRCA steel. Pedestals with legs-

pedestal flat metal front, free standing central locking of size 390 mm w x 435 mm d x 646 mm height 3dr = 2box+1file. The

work shall be carried out as per the instructions and guidance received from engineer incharge.

The cushioned seat and back assembly consists of seat base moulded in glass filled Poly-amide, moulded polyurethane

foam and upholstered with high stretch knitted polyester fabric. The back size shall be 45.5cm W x 53.0cm H. The HR

polyurethane foam used in seat and back cushion is moulded in density 45kg per m3. The seat and back are firmly

connected to the base frame and are cantilevered in such a way that it gives a multi dimensional movement possibility just

with a simple lean on the sides or back, without need for complex manual adjusments. The cantilevered seat offers impact

cushioning while seating and synchronises with the back movement during posture changes. The ‘S: shaped spines

11 moulded in high strength glass filled Polyamide and the spine connector moulded in glass filled Polyamide form the back Each 70 13,635.38 9,54,476.87

spine structure involved in multi dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3

position Tilt limiter feature which is inbuilt in saet base and the tension is user weight dependent. The adjustable armrests

assembly consists of armrest housing sliding over the armrest structure, both moulded in glass filled Polyamide. The

pneumatic height adjustment shall have a stroke of 9.2cm.The pedestal is injection moulded in glass filled Polyamide and

fitted with 5 nos. twin wheel castors. The pedestal is 66cm pitch centre diameter and 76cm with castors. The overall

dimensions of the chair shall be 76cmx 76cm x(99.5-108.8cm). The seat height shall be (44.5-53.8cm).

Main worktop shall be of size 1500mm x 600mm x 750mm. Side unit shall be 900mm x 450mm. Back unit shall be 2100mm X

450mm X 750mm. Main worktop and Return Unit top shall be made from 25mm Thick Pre-laminated board (PLB) of E1-P2

grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap

provided on work surface for wire management. Modesty panel shall be made of 18mm Thick Pre-laminated twin board

(PLT) of E1-P2 grade and approved shade. Cube legs are fabricated from MS ERW Tube of 50 mm x 25 mm x 1.2mm thick

and 40 mm x 40 mm x 1.2 mm thick (as per IS: 7138). At the top surface of leg, support brackets of 3 mm thick HR (as per IS:

2062) are welded for fixing worktop. These are welded together by welding. This welded structure is coated with 50 micron

epoxy polyester coating. At the base, a plastic cap with M8 molded insert is fixed, on to which a straight M8 leveler fitted

which allows for adjustment of the height upto 50mm. Cross Members are made from 50mm X 25mm X 1.2mm thick ERW

tube (as per IS:7138). These are coated with 50 micron epoxy polyester coating. Cross Members are assembled by friction fit

PDC joinery and grub screws. There are always two cross members for one table. Soft closing access flap is used with

provision for standard size of 8 module electrical (Anchor Roma) is offered. Power box made with 0.8 mm thick CRCA (IS:

513), with switch plate (8 Module cutout provision for Anchor Roma). This is fixed with worktop along the depth at Access

Flap position. Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-

12823:1990, Edge banded with matching 2 mm thick PVC lipping. Door is fixed with slide on hinges and handle is provided

for ease of opening. Drawer is provided with ebco metabox slide and lock for security.

The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass filled nylon &

upholstered using Quilted knitted fabric. Seat Size:- 47cm(w) × 51.5cm (D). The HR polyurathene foam is moulded with

density =45+/-2 kg/m cube and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down

adjustment of 8.0 ± 0.5cm which is provided in armrest structure. Armrest structure is chrome plated and fitted with an

armrest top. It shall have Front pivot synchro mechanism with following features. 360 degree revolving type, Single point

control, front fivot tilt, tilt tension adjustment, 4 position locking with anti- shock feature, seat/back tilting ration of 1:2. The

13 DGM lumber support consists of polypropylene pad with mouled polyurathene foam & covered with polyester fabric. The height Each 13 22,048.30 2,86,627.90

of lumber pad can be adjusted through two projecting knobs provided on the rear side of the pad. Lumber pad has an

adjustment of 8.0± 0.5 cm in height. The pneumatic height adjustment has an adjustment stroke of 10cm. The pedestal is

fabricated from 0.2cm thick HR sheet chrome plated and assembled with injection moulded moulded black polypropylene

hub cap. the work shall be carried out as per guidance and instructions recieved from Engineer Incharge. This shall come

along a headrest assembly consisting of polypropylene pad with lumbr support and covered with polyester fabric. Neckrest

assembly has an adjustment stroke of 4.2cm and otation adjustment stroke of 76 degrees.

The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass filled nylon &

upholstered using Quilted knitted fabric. Seat Size:- 47cm(w) × 51.5cm (D). The HR polyurathene foam is moulded with

density =45+/-2 kg/m cube and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down

adjustment of 8.0 ± 0.5cm which is provided in armrest structure. Armrest structure is chrome plated and fitted with an

armrest top. It shall have Front pivot synchro mechanism with following features. 360 degree revolving type, Single point

14 DGM control, front fivot tilt, tilt tension adjustment, 4 position locking with anti- shock feature, seat/back tilting ration of 1:2. The Each 26 19,285.71 5,01,428.40

lumber support consists of polypropylene pad with mouled polyurathene foam & covered with polyester fabric. The height

of lumber pad can be adjusted through two projecting knobs provided on the rear side of the pad. Lumber pad has an

adjustment of 8.0± 0.5 cm in height. The pneumatic height adjustment has an adjustment stroke of 10cm. The pedestal is

fabricated from 0.2cm thick HR sheet chrome plated and assembled with injection moulded moulded black polypropylene

hub cap. the work shall be carried out as per guidance and instructions recieved from Engineer Incharge.

The cushioned seat and back assembly consists of seat base moulded in glass filled Poly-amide, moulded polyurethane

foam and upholstered with high stretch knitted polyester fabric. The back size shall be 45.5cm W x 53.0cm H. The HR

polyurethane foam used in seat and back cushion is moulded in density 45kg per m3. The seat and back are firmly

connected to the base frame and are cantilevered in such a way that it gives a multi dimensional movement possibility just

with a simple lean on the sides or back, without need for complex manual adjusments. The cantilevered seat offers impact

cushioning while seating and synchronises with the back movement during posture changes. The ‘S: shaped spines

15 AGM moulded in high strength glass filled Polyamide and the spine connector moulded in glass filled Polyamide form the back Each 42 18,089.14 7,59,743.90

spine structure involved in multi dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3

position Tilt limiter feature which is inbuilt in saet base and the tension is user weight dependent. The adjustable armrests

assembly consists of armrest housing sliding over the armrest structure, both moulded in glass filled Polyamide. The

pneumatic height adjustment shall have a stroke of 9.2cm.The pedestal is injection moulded in glass filled Polyamide and

fitted with 5 nos. twin wheel castors. The pedestal is 66cm pitch centre diameter and 76cm with castors. The overall

dimensions of the chair shall be 76cmx 76cm x(99.5-108.8cm). The seat height shall be (44.5-53.8cm).

Providing and Placing in position High Back Chair. The seat shall be made up of 1.2 +/- 0.1 cm thick hot pressed plywood &

upholstered with synthetic leather and moulded polyurethane foam. The dimensions of seat should be 49.0cm(W) x 51.4(D)

and that of back should be 51.8cm(W) x 75.2cm(H). High Resilience (HR) polyurethane foam should be used in making seat

& back which shall be moulded with density 45 +/- 2 kg/m ³ and hardness load 16+/- 2 kgf as per IS: 7888 for 25%

compression.The adjustable armrests are designed with up-down adjustment in 8 steps(8.0+/-0.5 range). The height

adjustable armrest structure is chrome plated and fitted with PU moulded over metal insert fixed armrest top. The mechanism

of the chair shall have following features : 360⁰ revolving type, Single point control, Tilt tension adjustment, 4 position locking

with antishock feature, seat back tilt ratio 1:2, front pivot for tilt with feet resting on ground ensuring more comfort. The Back

can be adjusted in 5 positions manually. Stroke of height adjustable spine is 7 cm. The chair shall be provided with

pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm. The pedestal is High Pressure Die cast polished

Aluminium and fitted with 5 nos. twin wheel castors. The pedestal is 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With

castors).The twin wheel castors are injection moulded in black PP. Seat can be slide horizontaly as per user convienience.

Stroke of seat slide is 5 cm. Overall dimensions of Chair shall be, Width of Chair - 67.5cm, Depth of Chair - 67.5cm as

measured from pedestal below. Height from ground - min 102.0 to max 119.0cm. Seat height - min 45.0 to max 55.0cm.

The seat shall be made up of 1.2 +/- 0.1 cm thick hot pressed plywood & upholstered with synthetic leather over moulded

polyurethane foam. The dimensions of seat should be 49.0cm(W) x 51.4(D) and that of back should be 51.6cm(W) x

65.7cm(H). High Resilience (HR) polyurethane foam should be used in making seat & back which shall be moulded with

density 45 +/- 2 kg/m ³ and hardness load 16+/- 2 kgf as per IS: 7888 for 25% compression.The adjustable armrests are

designed with up-down adjustment in 8 steps(8.0+/-0.5 range). The height adjustable armrest structure is chrome plated and

fitted with PU moulded over metal insert fixed armrest top. The mechanism of the chair shall have following features : 360⁰

Confernece revolving type, Single point control, Tilt tension adjustment, 4 position locking with antishock feature, seat back tilt ratio 1:2,

Chair front pivot for tilt with feet resting on ground ensuring more comfort. The Back can be adjusted in 5 positions manually.

Stroke of height adjustable spine is 7 cm. The chair shall be provided with pneumatic height adjustment which shall have

stroke of 10.0 +/- 0.3 cm. The pedestal is High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors.

The pedestal is 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors).The twin wheel castors are injection moulded in

black PP. Seat can be slide horizontaly as per user convienience. Stroke of seat slide is 5 cm. Overall dimensions of Chair

shall be, Width of Chair - 67.5cm, Depth of Chair - 67.5cm as measured from pedestal below. Height from ground - min 92.0

to max 110.0cm. Seat height - min 45.0 to max 55.0cm.

Providing bookrack of following specifications. Single Body 4800W : 4800 x 2078** x 300. Side panels, Frame & Cross L bracket

are made using 0.8 mm CRCA (IS:513). The assembly consists of 2 tie rods, 4 fixing brackets and 2 turnbuckles. The tie rods are

fixed in a shape of ‘X’ The tie rods are made of 4mm diameter rods of MS while fixing brackets are made of 2mm thick.

CRCA IS:513 Grade. Optional wooden panel of 25mm thk PLT, E1-P2 grade board, edges shall be provided with machine

18 library storage pressed 2 mm thick PVC lipping glued with hot melt EVA glue. Under structure is made of 0.8m CRCA (IS:513). Shelves used Each 4 29,238.43 1,16,953.72

are 10 bend panel made of 0.8mm CRCA (IS:513). Shelf panels are placed on shelf support and then fixed using nut and

bolts from below. Standard config. consists of 6 loading levels formed by 5 no of adjusted shelf for each main and add on

unit. Uniformly Distributed Load Capacity per each shelf is 80 Kg maximum. All MS sheetmetal and metal frame components

are powder coated with epoxy polyester powder to the min thickness of min 45 microns. At the rear side of the shelves back

stiffeners are provided. These actcas separators made of 0.8mm THK CRCA.

The overall size shall be 2025(H) x 450(W) x 500(D). The add on units are stacked width wise to form a row of storage having

common side panel. The legs shall be of 45mm height and fitted with screw type leveler.The material shall be a combination

of CRDA 0.5mm and 0.8mm thickness. Each full shelf shall have a load capacity of max. 40 Kg UDL . The coating shall be of

19 full ht storage Epoxy Polyester Powder of 50 microns(± 10 microns) thickness. The wooden door shall be of size 448(W) x 18(T) x 1978 (H). It Each 4 44,568.55 1,78,274.21

shall be a 3 way locking door made of MDF and Honeycomb covered with decorative and backing laminate. the locking

shall self closing hinges. the handle shall be made of Mazak. 2mm thick lipping is done on all edges. It shall have Self closing

Construction: Rigid Knock Down construction made of 0.8 thk. CRCA Steel conforming to IS: 513 Gr.D. Each body block

consists of 1 Main unit & then Add-on units (0, 1,2,3 depending on no. of bays 1, 2, 3, 4 respectively). Each unit has 6 loading

levels with 5 nos. adjustable shelves for 2361 Height body. Front Cover, Back cover, is made of 0.8 thk. CRCA Steel

conforming to IS: 513 Gr.D. The front cover has a pattern of holes on the front surface for ventilation purpose. Back panels

when the entire optimizer layout is locked it also prevents access to inside files from the outside in case of single body.

Shared Panel, door frame is made of 0.8 thk. CRCA Steel conforming to IS: 513 Gr.D. Door Frame: The door frame assembly is

made of 2 vertical door stiffeners, a top horizontal stiffener and a bottom horizontal stiffener. Optimizer Height for ground for

2361H body is 2502.5mm (2361 body + 80 understructure + 61.5 channel system). The bodies including shelves are given

antirust surface treatment & are coated with epoxy polyester powder. It involves an 8-step treatment consisting of Hot water

rinse, Knock of degreasing, degreasing, cold water rinse, phosphating, cold water rinse, and passivation & dry off oven

treatment. Final finish consists of epoxy polyester powder coating of approved color & shade with a Dry Film Thickness of

20 compactors minimum 40 microns. Shelf is made of 0.7 thk CRCA steel conforming to IS: 513 Gr.D or DD. Its max load bearing capacity is Each 36 45,021.44 16,20,771.72

100 Kg uniformly distributed per shelf. In case of Push Pull Understructure:- The Understructure is a welded frame suitably

fabricated to bear the loads based on configuration. The frame consists of the following parts: Main channel, body-fixing

channel, body-fixing angle and bearing-fixing angle. All the components are made of CRCA sheet 2 mm thk conforming to

IS:513. In case of Drive Type Understructure:- The Understructure is a welded frame suitably fabricated to bear the loads

based on configuration. The frame consists of the following parts: Main channel, body-fixing channel, U-channel and Z-

channel. All the components are made of HR sheet 3 mm thk. conforming to IS:2062. The hand wheel comprises of a

welded metal frame which is then covered by PU using insert-molding process. The metal frame is made of 3 mm thk. HR

conforming to IS:2062. The handwheel is connected to the rollers through a ‘Sprocket-Chain’ arrangement mounted on the

side of the body. Rail Channels (for Push-pull and Drive type with no platform): It consists of ‘C’ section 2 mm thk HR sheet &

Square 25.4mm X 2mm thk ERW tube – both connected by screws. Prior to the grouting of the guide channels with the help

of raul plug & screw, ensure the ground is level.

Providing and Palcing in place of canteen table. The overall dimensions of the tbale shall be 1800 x 750 x 750mm. Tablr top

shall be made from 25mm thick MDF OSR board with PU coating on top side. Legs are made by welding the combination of

MS ERW round tube of dimater 63.5mm x 2mm thick. Flamges of 1.6mm thick CRCA and 1.2mm thick. Insde platew are

made from HR 5mm thick sheet. Assembly is epoxy polyester powder coated. Table top folds upside at offset center pivot

provided on support bracket which is Aluminium alloy pressure die cast part coated with epoxy olyester powder caoted

min. 40 microns. Table top connected with spring loaded mechanism with pull handle made of snadwich tubes of MS ERW

1.2mm thick and 1.6mm thick tubes. Coated with epoxy polyester powder coated min. 40 microns. Legs are provided with

casters of 65mm diameter loackable type for ease of movement and can be locked when required at any position.

Providing and Palcing in place of canteen table. The overall dimensions of the tbale shall be 1350 x 600 x 750mm. Tablr top

shall be made from 25mm thick MDF OSR board with PU coating on top side. Legs are made by welding the combination of

MS ERW round tube of dimater 63.5mm x 2mm thick. Flamges of 1.6mm thick CRCA and 1.2mm thick. Insde platew are

made from HR 5mm thick sheet. Assembly is epoxy polyester powder coated. Table top folds upside at offset center pivot

provided on support bracket which is Aluminium alloy pressure die cast part coated with epoxy olyester powder caoted

min. 40 microns. Table top connected with spring loaded mechanism with pull handle made of snadwich tubes of MS ERW

1.2mm thick and 1.6mm thick tubes. Coated with epoxy polyester powder coated min. 40 microns. Legs are provided with

casters of 65mm diameter loackable type for ease of movement and can be locked when required at any position.

The seat and Back are made up of injection moulded high impact strength PolyPropylene polymer compound with indoor

grade UV resistance. Seat size shall be 52.5cm x 53.2cm. Back size shall be 51.6cm x 40.5cm. The tubular welded frame is

made of dia. 2.22cm x 0.12cm and 3.5cm x 1.5cm x 0.12cm stainless steel 202 grade tube. The rubes are buff polished to

give shiny finish. The shoes and Amrest are made of high impacy strength PolyPropylene polyemr compound with indoor

grade UV resistance and pressed and press fitted with tubular frame. The overall dimensions of the chair shall be 52.4cm x

55.8cm x 84.5cm. The seating height shall be 45.0cm.

Supplying & Placing in position bar stool of followin specifications. The seat shall be leatherrete uphostred cushion fitted to

seat tray.The cushion shall be 1.2cm of PU slabstokfoam. Slabstoc foam shall be glued to CRCA sheet of 0.12cm (+/- 0.01cm)

thick and uphostered with leatherrete. The seat tray is made up of 0.25cm(+/- 0.01cm) thick CRCA sheet as per IS:513

Standard.It is powder coated with Epoxy Based polyster powder coating (40-0 microns). Seat Cushion size shall be 40 cm (W)

x 34.5 cm (D). Top tray size shall be 41.5cm(W) x 40cm(D). The understructure shall be made up of FRC certified Seaoned

Teak Wood finished with a clear matt coat of .PU lacquer. understructure size shal be 48.6 cm (W) x 47 cm (D) x 6.88 cm (H).

Foot rest shall be made up of 1.6 cm (+/- 0.02cm) diameter MS ERW tube (IS:71380). It is epoxy based powder coating (40-60

microns). Additionally it is coated with abrassion resistance coating. Footrest size shall be 40.7 cm (W) x 38.7 cm (D).

Using existing furniture including unistalling, packing, shifting, modification and repair as per the approved layout upto the

complete satisfaction of engineer-in - charge. The contractor shall inspect the condition of exsiting furniture before bidding.

25 The Prime cost has been considered based on overall furniture as per layout minus provideding of new furniture, if there is Lot 1 40,95,682.27 40,95,682.27

any deviation the cost will be changed on pro rata basis. The final decision under this head will be as per engineer in

charge which was final and binding to contractor.

Grand Total 2,26,56,844.66

Grand Total 2,26,56,844.66

Summary of AV Works

S.No. Description of Works Amount (SR, in Rs.) Amount (MR in Rs.)

1 Board Room 1,49,03,756.00

2 Mini Board Room & 2 nos. Meeting Rooms 93,17,054.00

GRAND TOTAL 2,42,20,810.00

GRAND TOTAL 2,42,20,810.00

Digitally signed by AMIT

SINGH 22:32:52 IST

Boardroom - 21 Pax

S. No. Function Specifications Qty Unit Rate Amount

Supply, Installation, Testing & Commissioning of 2-way, Ceiling-mount loudspeaker. Frequency range - 65 Hz to 20 kHz, Rated RMS Power - 30Watts or better,

Ceiling Sensitivity-89 dB SPL or better, Coverage Angle (-6 dB)-110° conical or better, Maximum SPL Continuous/Peak-104dB/110dB or better, Rated Impedance - 8 Ohms.

Speakers Transformer Tapping - 70V/100V(30, 15, 7.5watts) or better. Transducer - LF - 6.5-inch or better, HF- .86-inch or better coaxially mounted with LF, Material - Painted

ABS polymer Baffle and Power coated steel grille or better. Safety rating - UL1480, UL2043. Mounting rails and C-Ring for ceiling tile included.

Supply, Installation, Testing & Commissioning of Quad channel class-D amplifier. Power - minimum 100 watts/channel @8Ω/4Ω or better. Should support

70V/100V.Should have Power sharing between channels or Bridge/Parallel mode to combine a pair of channel for maximum output . Signal to Noise ->100 dB or

better, Frequency Response-20 Hz - 20 kHz or better, Input Impedance->10 kΩ (balanced & unbalanced) or better, Front Panel Indicators-Power, per channel Signal,

Protect/Limit etc. Better to have Energy Star rating for power saving. Shall include rack and surface mounting brackets.

Supply, Installation, Testing & Commissioning of Digital Signal Processor with minimum 16 Mic/Line Inputs and 8 Line Outputs. AEC Channels - minimum 16

Digital Signal assignable & routable with minimum tail length of 200ms. Minimum 8x8 Dante channels and support for up to 128x128 Network audio channels via Dante or

1.3 Processor AES67. SIP Softphone integration for Audio conferencing and 16x16 USB Audio channels supporting AV USB Bridging for software or web based conferencing 1.00 Nos 8,62,363.00 8,62,363.00

(DSP) applications. The processor shall also have minimum 24 bit-A/D-D/A converters, 48 kHz Sample rate,Frequency response of 20 Hz to 20 kHz or better. Ethernet,

RS232 ports for Third party device control.

Supply, Installation, Testing & Commissoning of Wired Table Top boundary microphone. Pickup pattern - Cardioid/Half-Cardioid. Programmable microphone button

1.4 for PTT, PTM, Toggle on/off, Permanent on and a two-color LED ring as a status indicator. Nominal Imprdance - 200Ω, Frequency Response - 40 Hz – 20 kHz, Max 13.00 Nos 58,044.00 7,54,572.00

Supply , Installation , Testing & Commissioning of Wireless Handheld Microphone set: having Dynamic cardioid or better polar pattern, 40 MHz or more switching

1.5 Bandwidth, Should have Signal to noise ratio >108dBA or better, Total Harmonic Distortion should be <0.9%, Frequency Response: 80 to 18000Hz or better, RF 1.00 Nos 1,19,856.00 1,19,856.00

Sensitivity: < 2.5 μV at 52 dB(A), Should have RF Power of 30mW or more, Should have mute/unmute button, Operating time: up to 8 hours or better

Supply, Installation, Testing and Comissioning of 98" 4K UHD (3840 x 2160) professional LED display With Built-in Android Signage Player, UHD upscalling min 500

2.1 Display - Main nits brightess or better, Contrast ratio: 4000:1, Aspect ratio: 24:7 Commercial grade, Viewing angle: 178° h/v Ports: minimum 2xHDMI, 1 x USB, RS232, LAN Control, 1.00 Nos 19,04,534.00 19,04,534.00

lifetime CMS license for the content to play during its ideal time.

Supply, Installation, Testing and Comissioning of 55" 4K UHD (3840 x 2160) professional LED display With Built-in Android Signage Player, Toughened Glass, UHD

upscalling min 400 nits brightess or better, Contrast ratio: 4000:1, Aspect ratio: 24:7 Commercial Grade, Ports: minimum 2xHDMI, 1 x USB, RS232, LAN Control

2.3 Display Mount Supply, Installation, Testing & Commissioning of suitable MS wall bracket for bracket for LED Display mounting with standard accessories. 3.00 Nos 10,526.00 31,578.00

Supply, Installation, Testing & Commissioning of Monitor Interactive-Brightness 400nit,Resoluation full HD USD,Usb Port.2.0*2, HDMI port HDMI*2, visa mount

200*200 mm, External Contral Rs232c(in/out) Rj45, Weigth Kg 8.3,Interactive Display of size 16 inch to 18 inch.

Display Lift Motorized Display Lift Stand -Height Range 670mm-1515mm,Material Aluminum,Steel,Plastic,TV Size 16"-22"Fit Screen Size: 16"-22",Weight Capacity: 50kg

Stand (110lbs),Certification: CE,FCC,RoHS,Profile: 115mm (4.5"

VIDEO,SWITCHING & INTERFACE SYSTEM

Supply, Installation, Testing & Commissioning of 1G HDMI Video Encoder. Inputs- 3 HDMI capable of streaming of 3-HDMI sources simultaneously.Resolution-upto

4K60 4:4:4, Power - PoE and AUX PSU. Ports Connections - RS232, GPIO/IR, Audio Inputs, Audio Output & USB port for USB Audio and Video for software based

Video Conferencing . Content Protection: HDCP 2.2 compliant, EDID Managament. Dante/AES67 Audio Support.Mounting accessories includedIf Encoder is capable

of streaming only one input, match the qty as per the requirement (6 Inputs).

Supply, Installation, Testing & Commissioning of 1G HDMI Video Decoder. Outputs- 2 HDMI capable of scaling and outputting 2 streams simultaneously.Resolution-

upto 4K60 4:4:4, Power - PoE and AUX PSU. Ports Connections - RS232, GPIO/IR, Audio Inputs, Audio Output & USB ports. Content Protection: HDCP 2.2 compliant,

EDID Managament. Dante/AES67 Audio Support.Mounting accessories included. If Decoder is capable of decoding only one stream, match the qty as per the

requirement(6 outputs).

Supply, Installation, Testing & Commissioning of Cable Manager with wireless charging spot, table mount modular multi-Connection Solution with retractable Lid

with cable pass through for 1 HDMI, 2 LAN, 2 Universal AC Power Outlet, etc.

Digitally signed by AMIT

SINGH 22:32:52 IST

Supply , Installation , Testing & Commissioning of Wireless Content Presentation, Collaboration, and Conferencing Solution making users

edit, and comment on documents in real−time sessions via their moniters. The device shall have 1 Ethernet: On an RJ–45 connector, 2 USB 3.0: On a female USB

Wireless type–A connector, 1 USB 2.0: On a female USB type–A connector, 2 Pin connector: Video Switching control; having 1 HDMI 2.0 output and 1 HDMI 2.0 Input. The

Presenter video resolution shall be up to 4K@60 for both Input & Output. The device shall be compatible with video conferencing apps as desired by client. It should have a

minimum of Processor: Intel® Gemini Lake QC SOC, Memory: 4GB LPDDR4 (2400), Storage: 32GB eMMC, Networking: 1 x Gigabit LAN Wi−Fi 802.11 ac/b/g/n dual

band, Operating System: Linux with power input of Input Source: 12V DC.

VIDEO CONFERENCE SYSTEM

Supply, Installation, Testing & Commissioning of Network PTZ Conference camera with 20x optical zoom & 60-degree horizontal coverage. Low Noise CMOS 4K

Network image sensor with User-configurable resolution and quality for IP streams (up to 1080p). HDMI resolutions up to 4K30 and SDI-3G resolution up to 1080p60. Image

4.1 Conferencing rotation controls to allow for inverted mounting using ceiling bracket. Minimum Illumination - 0.5 Lux @ (F1.8, AGC ON), Horizontal Rotation Range - ±170°, Vertical 1.00 Nos 10,58,354.00 10,58,354.00

Camera -Main Rotation Range - -30° to +90°, White Balance controls- Auto, indoor, outdoor, one-push, manual, specified color temperature. Power – PoE & AUX. Wall mounting

bracket included.

Supply, Installation, Testing & Commissioning of Network PTZ Conference camera with 12x optical zoom & 80-degree horizontal coverage. Low Noise CMOS 4K

Network image sensor with User-configurable resolution and quality for IP streams (up to 1080p). HDMI resolutions up to 4K30 and SDI-3G resolution up to 1080p60. Image

4.2 Conferencing rotation controls to allow for inverted mounting using ceiling bracket. Minimum Illumination - 0.5 Lux @ (F1.8, AGC ON), Horizontal Rotation Range - ±170°, Vertical 2.00 Nos 6,78,432.00 13,56,864.00

Camera -Side Rotation Range - -30° to +90°, White Balance controls- Auto, indoor, outdoor, one-push, manual, specified color temperature. Power – PoE & AUX. Wall mounting

bracket included.

Supply, Installation, Testing & Commissioning of Software or Hardware based control system with required perpetual license and accessories to control room

equipemnts mentioned in this BOQ.

Supply, Installation, Testing & Commissioning of High Definition, Multi-touch Touch Screen Controller with 24-bit color display. Viewable Screen Dimensions

5.2 Touch Panel (diagonal) – 7-inch, Resolution - 1280 × 800, Brightness - 400 Nits, Aspect ratio – 16:10, Power – PoE, Mounting – Wall and Tabletop, Orientation - Vertical / 1.00 Nos 4,52,287.00 4,52,287.00

horizontal. Configurable LED’s on both side. Ambient Light Sensor, Proximity Detection.

Network Supply, Installation, Testing & Commissioning of 24 port L2 Gigabit POE+ Network Swicth with Multicast support with IGMP V1/V2, QoS support, IPV4/IPV6 Support,

Switch Switching Capacity in Gigabits per Second, 1 Gbps Non-blocking ports with standard accessories.

CABLE, CONNECTORS, ACCESSORIES

6.1 Supply, Installation, Testing & Commissioning of 18Gbps 9-feet HDMI Cable. 20.00 Nos 22,614.00 4,52,280.00

6.2 HDMI Cables Supply, Installation, Testing & Commissioning of 18Gbps 6-feet HDMI Cable. 20.00 Nos 18,092.00 3,61,840.00

6.3 Supply, Installation, Testing & Commissioning of 18Gbps 3-feet HDMI Cable. 24.00 Nos 13,569.00 3,25,656.00

6.4 Speaker Cable Supply, Installation, Testing & Commissioning of 2 core 2.5 sqmm PVC Sheathed loudspeaker cable. 250.00 Mtrs 905.00 2,26,250.00

6.5 Supply, Installation, Testing & Commissioning of 2 core shielded balanced microphone cable. 450.00 Mtrs 603.00 2,71,350.00

6.6 CAT6a Cables Supply, Installation, Testing & Commissioning of Cat6a Cable for AV Network connectivity . 1,200.00 Mtrs 86.00 1,03,200.00

6.7 Programming Programming & Comissioing of the conference system 1.00 Nos 2,93,500.00 2,93,500.00

Digitally signed by AMIT

SINGH 22:32:52 IST

Mini Boardroom & Meeting Room

S. No. Function Specifications Qty Unit Rate Amount

Supply, Installation, Testing & Commissioning of 2-way, Ceiling-mount loudspeaker. Frequency

range - 65 Hz to 20 kHz, Rated RMS Power - 30Watts or better, Sensitivity-89 dB SPL or better,

Coverage Angle (-6 dB)-110° conical or better, Maximum SPL Continuous/Peak-104dB/110dB or

1.1 better, Rated Impedance - 8 Ohms. Transformer Tapping - 70V/100V(30, 15, 7.5watts) or better. 10 Nos 52,767.00 5,27,670.00

Transducer - LF - 6.5-inch or better, HF- .86-inch or better coaxially mounted with LF, Material -

Painted ABS polymer Baffle and Power coated steel grille or better. Safety rating - UL1480,

UL2043. Mounting rails and C-Ring for ceiling tile included.

Supply, Installation, Testing & Commissioning of Quad channel class-D amplifier. Power -

minimum 100 watts/channel @8Ω/4Ω or better. Should support 70V/100V.Should have Power

Amplifier for sharing between channels or Bridge/Parallel mode to combine a pair of channel for maximum

1.2 Ceiling output . Signal to Noise ->100 dB or better, Frequency Response-20 Hz - 20 kHz or better, Input 2 Nos 2,59,312.00 5,18,624.00

Speakers Impedance->10 kΩ (balanced & unbalanced) or better, Front Panel Indicators-Power, per channel

Signal, Protect/Limit etc. Better to have Energy Star rating for power saving. Shall include rack

and surface mounting brackets.

Supply, Installation, Testing & Commissioning of Digital Signal Processor with minimum 16

Mic/Line Inputs and 8 Line Outputs. AEC Channels - minimum 16 assignable & routable with

minimum tail length of 200ms. Minimum 8x8 Dante channels and support for up to 128x128

Mini Board Network audio channels via Dante or AES67. SIP Softphone integration for Audio conferencing

Room and 16x16 USB Audio channels supporting AV USB Bridging for software or web based

conferencing applications. The processor shall also have minimum 24 bit-A/D-D/A converters, 48

kHz Sample rate,Frequency response of 20 Hz to 20 kHz or better. Ethernet, RS232 ports for Third

party device control.

Supply, Installation, Testing & Commissoning of Wired Table Top boundary microphone. Pickup

Boundary pattern - Cardioid/Half-Cardioid. Programmable microphone button for PTT, PTM, Toggle on/off,

Microphone Permanent on and a two-color LED ring as a status indicator. Nominal Imprdance - 200Ω,

Frequency Response - 40 Hz – 20 kHz, Max SPL-140 dB.

Supply , Installation , Testing & Commissioning of Wireless Handheld Microphone set: having

Dynamic cardioid or better polar pattern, 40 MHz or more switching Bandwidth, Should have

1.5 Signal to noise ratio >108dBA or better, Total Harmonic Distortion should be <0.9%, Frequency 3 Nos 1,19,856.00 3,59,568.00

Response: 80 to 18000Hz or better, RF Sensitivity: < 2.5 μV at 52 dB(A), Should have RF Power of

30mW or more, Should have mute/unmute button, Operating time: up to 8 hours or better

Digitally signed by AMIT

SINGH 22:32:52 IST

Supply, Installation, Testing and Comissioning of 86" 4K UHD (3840 x 2160) professional LED

display With Built-in Android Signage Player, UHD upscalling min 500 nits brightess or better,

2.1 Display - Main Contrast ratio: 4000:1, Aspect ratio: 24:7 Commercial grade, Viewing angle: 178° h/v Ports: 1 Nos 12,45,720.00 12,45,720.00

minimum 2xHDMI, 1 x USB, RS232, LAN Control, lifetime CMS license for the content to play

during its ideal time.

Supply, Installation, Testing and Comissioning of 55" 4K UHD (3840 x 2160) professional LED

display With Built-in Android Signage Player, Toughened Glass, UHD upscalling min 400 nits

brightess or better, Contrast ratio: 4000:1, Aspect ratio: 24:7 Commercial Grade, Ports: minimum

2xHDMI, 1 x USB, RS232, LAN Control

Supply, Installation, Testing & Commissioning of suitable MS wall bracket for bracket for LED

2.4 Display Mount 5 Nos 10,526.00 52,630.00

Display mounting with standard accessories.

VIDEO,SWITCHING & INTERFACE SYSTEM

Supply, Installation, Testing & Commissioning of 1G HDMI Video Encoder. Inputs- 3 HDMI capable

of streaming of 3-HDMI sources simultaneously.Resolution-upto 4K60 4:4:4, Power - PoE and

AUX PSU. Ports Connections - RS232, GPIO/IR, Audio Inputs, Audio Output & USB port for USB

Audio and Video for software based Video Conferencing . Content Protection: HDCP 2.2

compliant, EDID Managament. Dante/AES67 Audio Support.Mounting accessories includedIf

Encoder is capable of streaming only one input, match the qty as per the requirement (6 Inputs).

Supply, Installation, Testing & Commissioning of 1G HDMI Video Decoder. Outputs- 2 HDMI

capable of scaling and outputting 2 streams simultaneously.Resolution-upto 4K60 4:4:4, Power -

PoE and AUX PSU. Ports Connections - RS232, GPIO/IR, Audio Inputs, Audio Output & USB ports.

Content Protection: HDCP 2.2 compliant, EDID Managament. Dante/AES67 Audio

Support.Mounting accessories included. If Decoder is capable of decoding only one stream,

match the qty as per the requirement(4 outputs).

Cable Supply, Installation, Testing & Commissioning of Cable Manager with wireless charging spot, table

3.3 Manager for mount modular multi-Connection Solution with retractable Lid with cable pass through for 1 6 Nos 59,551.00 3,57,306.00

Table HDMI, 2 LAN, 2 Universal AC Power Outlet, etc.

Digitally signed by AMIT

SINGH 22:32:52 IST

Supply , Installation , Testing & Commissioning of Wireless Content Presentation, Collaboration,

and Conferencing Solution making users

edit, and comment on documents in real−time sessions via their moniters. The device shall have

1 Ethernet: On an RJ–45 connector, 2 USB 3.0: On a female USB type–A connector, 1 USB 2.0: On

Wireless a female USB type–A connector, 2 Pin connector: Video Switching control; having 1 HDMI 2.0

Presenter output and 1 HDMI 2.0 Input. The video resolution shall be up to 4K@60 for both Input & Output.

The device shall be compatible with video conferencing apps as desired by client. It should have a

minimum of Processor: Intel® Gemini Lake QC SOC, Memory: 4GB LPDDR4 (2400), Storage: 32GB

eMMC, Networking: 1 x Gigabit LAN Wi−Fi 802.11 ac/b/g/n dual band, Operating System: Linux

with power input of Input Source: 12V DC.

Supply, Installation, Testing & Commissioning of 24 port L2 Gigabit POE+ Network Swicth with

4.1 Multicast support with IGMP V1/V2, QoS support, IPV4/IPV6 Support, Switching Capacity in 1 Nos 1,88,453.00 1,88,453.00

Gigabits per Second, 1 Gbps Non-blocking ports with standard accessories.

CABLE, CONNECTORS, ACCESSORIES

5.1 Supply, Installation, Testing & Commissioning of 18Gbps 9-feet HDMI Cable. 15 Nos 22,614.00 3,39,210.00

5.2 HDMI Cables Supply, Installation, Testing & Commissioning of 18Gbps 6-feet HDMI Cable. 15 Nos 18,092.00 2,71,380.00

5.3 Supply, Installation, Testing & Commissioning of 18Gbps 3-feet HDMI Cable. 20 Nos 13,569.00 2,71,380.00

Supply, Installation, Testing & Commissioning of 2 core 2.5 sqmm PVC Sheathed loudspeaker

5.4 Speaker Cable 200 Mtrs 905.00 1,81,000.00

5.5 Supply, Installation, Testing & Commissioning of 2 core shielded balanced microphone cable. 300 Mtrs 603.00 1,80,900.00

5.6 CAT6a Cables Supply, Installation, Testing & Commissioning of Cat6a Cable for AV Network connectivity . 100 Mtrs 86.00 8,600.00

Digitally signed by AMIT

SINGH 22:32:52 IST

Summary for additional IT and Low voltage items

SL NO. Description of items Amount

1 Supply, Installation, Configuration and Commissioning of EPABX System 44,75,835.00

2 Supply, Installation, Configuration and Commissioning of Wifi Network System

2.1 Wifi Access points(10 No.s) (4x4) 7,27,500.00

2.2 Wireless Controller as per Specification 8,18,100.00

3 Supply, Installation, Configuration and Commissioning of LAN Network

3.1 POE Switch 13,34,250.00

3.2 Non POE Switch and switch for NVR and camera 38,74,500.00

4 Firewall 16,95,000.00

Total for IT & Networking 1,29,25,185.00

Digitally signed by AMIT

SINGH 22:32:52 IST

EPABX System BOQ for PFRDA office WTC

SL NO. Description of items Unit Quantity Rate Amount

IP PBX system with 2 PRI, 100 Analog extensions, 150 digital extensions with

with Operator Console MDF for all lines

2 Digital Phones-6 Key & 12 Keys Nos 150.00 21,750.00 32,62,500.00

3 Operator Console 1.00 32,670.00 32,670.00

4 Analog Phones-Push Button Nos 100.00 1,417.50 1,41,750.00

5 Patch Cords From PBX to MDF RMT 753.00 80.00 60,240.00

6 300 pair rack mountable MDF Nos 1.00 5,700.00 5,700.00

Total for EPABX System 44,75,835.00

Digitally signed by AMIT

SINGH 22:32:52 IST

Wifi Controller BOQ for PFRDA office WTC

Wireless Controller Specifications:

SL No Description Unit Qty Rate Amount

Essential Features:

1 Controller should be 19” Rack mountable 1U/2U height.

WLAN Controller should have minimum 2 nos. of 10/100/1000

Ethernet or SFP Ports and one Console port.

Proposed Controller support up to 150 AP on a single hardware

with support of seamless roaming access over L2/L3 network.

5 Controller should support minimum 250 WLAN’s

Controller should have capacity to handle minimum 4000 or

more Concurrent devices.

General Feature

Controller should provide air-time fairness between these

different speed clients – slower clients should not be starved by

the faster clients and faster clients should not adversely

affected by slower clients.

Controller should support Spectrum Analysis feature to detect

interference from different sources.

System Should provide real-time charts showing interference

for access point, on a per-radio, per-channel basis.

Ability to map SSID to VLAN and dynamic VLAN support for

11 support automatic channel selection for interference avoidance

12 Controller must support 802.11k and 802.11r.

Auto Deployment of AP's at different locations

Access points can discover controllers on the same L2 domain

without requiring any configuration on the access point.

Access points can discover controllers across Layer-3 network

through DHCP or DNS option

Digitally signed by AMIT

SINGH 22:32:52 IST

Security & monitoring

15 Controller should support following for security & Authentication:

WIRELESS SECURITY: WEP, WPA-TKIP, WPA2-AES,

AUTHENTICATION : 802.1X, local database

External AAA servers : Active Directory,

System should provide DOS attacks and Intrusion Detection &

Prevention and Control for any Rouge Access Points.

The AP should be able to scan for rogue access points and the

controller should be able to locate them on a floor map. The

controller should be able to send a notification to the

administrator when a rogue AP has been detected.

20 Controller should support CAPWAP/LWAPP protocol.

21 System must be able to provide L2/L3/L4 Access Control.

Controller Should support L2 Client Isolation so User cannot

22 access each other’s devices. Isolation should have option to

apply on AP or SSID's.

Controller should be able to create local database of up to 4000

Controller should support Access Control based on

Identity/Role/ Device/time or Application.

Support for Walled garden “Walled Garden” functionality to

25 allow restricted access to select destinations by unauthorized

wireless users.

26 IPv4 & IPv6 support from Day 1

27 Should support on board and external DHCP server

Controller should support integrated or External AAA server

28 including Microsoft AD and Linux based open source AAA

Digitally signed by AMIT

SINGH 22:32:52 IST

The proposed architecture should be based on controller based

Architecture with thick AP deployment. While Encryption /

decryption of 802.11 packets should be able to perform at the

The Controller should support OS/Device finger printing and

device type based policies i.e allow or deny, Bandwidth rate

limit, VLAN mapping. The controller should also provide

application visibility and control.

The controller shall be manageable using CLI, Telnet/SSH,

HTTP based GUI and SNMPv2/v3.

The controller should be able to present a customizable

dashboard with information on the status of the WLAN network.

The controller should be able to raise critical alarms by sending

34 an email. The email client on the controller should support

SMTP outbound authentication and TLS encryption.

The vendor should specify if all features are available with the

basic access controller pricing or if the support of some

35 features require the acquisition of some licenses. The vendor

should specify which feature requires which type of licensing

including its cost.

Controller should have inbuilt BYOD features and Guest

Access management procedure where user may use internet

without entering to Enterprise SSID and should be time

restricted. The Guest management should be a self-service

one from end user perspective without the use of any additional

The Controller should support WLAN that will allow users to

37 login through social media like Facebook, Linkedin,

Google/Google+ or Windows Live.

38 per SSID or dynamic Per user bandwidth Rate Limiting

Digitally signed by AMIT

SINGH 22:32:52 IST

Self-healing (on detection of RF interference or loss of RF

coverage) and vendor should provide their Interference

39 mitigation techniques for same Domain interference

(interference from AP's connected to same Controller) and from

other AP's and 2.4Ghz devices (Microwave's, Radio's etc.)

Dynamic RF management that provides the capability to pause

40 channel scanning / adjust RF scanning intervals based on

application and load presence.

Capability to provide preferred access for “fast” clients over

41 “slow” clients (11n vs. 11g) in order to improve overall network

System must support Band Steering where 5 Ghz clients are

42 forced to connect over 5Ghz Radio to provide better load

balancing among 2.4Ghz and 5Ghz Radios.

Support advanced multicast features and WMM support to

provide best performance on Video applications.

44 Should have Voice Call Admission control

Client Management

The controller should provide a Guest Login portal in order to

authenticate users that are not part of the organization.

The solution should be able to provide a web-based application

46 that allows non-technical staff to create Guest accounts with

validity for fixed duration like hours or days.

System should be able to send password direct through Email

and SMS to the user.

System should be able to generate one click password for

single user, multiple users or single user multiple devices.

System should support internal and External Database for user

authentication.

System should support user management features like Rate

50 limiting based on time based WLAN Access & User profile per

Digitally signed by AMIT

SINGH 22:32:52 IST

51 Wi-Fi Alliance certified

Wireless Controller as per Specification Nos 1 818100 818100

Digitally signed by AMIT

SINGH 22:32:52 IST

Wifi Access BOQ for PFRDA office WTC

SL NO 1.5 Hardware controller managed 2*2:2 Indoor Wi-Fi 6 (802.11ax) Access Point Unit Qty Rate Amount

Specification / Requirement

The APs should support the IEEE 802/11a/b/g/n/ac/ax with dual radio capabilities conforming to Wi-Fi 6 standard.

The AP should support 2x2:2 MIMO on both the bands. It should support minimum 1200 Mbps data rates on 5 GHz and minimum

574 Mbps data rates on 2.4GHz.

The AP shall have two 1Gbps Ethernet port. Additionally, it should have an USB port for hosting Internet-of-Things (IoT) devices

such as Bluetooth Low Energy (BLE) smart beacons. It should have integrated BLE and Zigbee 1 radio, switchable

The access points should manage as standalone, controller and Cloud based.

The access point should be able to operate in full MIMO mode and the necessary power POE/POE+ should be provided.

Security mechanisms should be in place to protect the communication between the Access Point controller and the Access

The AP should have an option to be powered up through DC power in addition to POE.

The AP should have a receive sensitivity of -96dBm.

The AP should provide an antenna gain of minimum 3dBi on both the bands.

The AP should support 20, 40, 80 MHz channelization.

The access point should be able to detect clients that have dual band capability and automatically steer those clients to use the

5GHz band instead of the 2.4GHz band.

The AP should provide minimum Tx Power of 22dBm on both the bands

The access point should support 802.1q VLAN tagging

The access point should support WPA-PSK, WPA-TKIP, WPA2 AES, WPA3, 802.11i security.

The Access Point should provide for concurrent support for high definition IP Video, Voice and Data application without needing

any configuration change. This feature should be demonstrable.

The Access Point should support WMM, Power Save, Tx Beamforming, LDPC, STBC, 802.11r/k/v.

The AP should have the capability to support minimum 15 BSSID

Should support 500 or more clients per AP.

Should support IPv6 dual stack from day one

The Access Point should support mesh configuration either directly or through the controller.

The Access Point should support rate limiting, application recognition and control, Access Control lists and device fingerprinting.

Operating Temperature: 0ºC to 50ºC. Operating Humidity: up to 95% non-condensing.

Should be plenum rated and comply to RoHS

Should be WI-FI certified and WPC approved.

Mechanism for physical device locking using padlock /Kensington lock / equivalent

Hardware controller managed Indoor Wi-Fi 6 (802.11ax) 4x4:4 Wi-Fi Access Point with 2.5Gbps backhaul.

Specification / Requirement

The APs should support the IEEE 802/11a/b/g/n/ac/ax with dual radio capabilities conforming to Wi-Fi 6 standard.

The AP should support 4x4:4 MIMO on 5 GHz and 2x2:2 on 2.4 GHz bands. It should support minimum 2400 Mbps data rates on

5 GHz and minimum 570 Mbps data rates on 2.4GHz.

Digitally signed by AMIT

SINGH 22:32:52 IST

The AP shall have One 2.5Gbps Ethernet port and one 1Gbps Ethernet port. Additionally it should have an USB port for hosting

Internet-of-Things (IoT) devices such as Bluetooth Low Energy (BLE) smart beacons.

The access points should be centrally managed as well capacity to work as standalone.

The access point should be able to operate in full MIMO mode and the necessary power POE/POE+ should be provided.

Security mechanisms should be in place to protect the communication between the Access Point controller and the Access

The AP should have an option to be powered up through DC power in addition to POE.

The AP should have a receive sensitivity of -96dBm.

The AP should provide an antenna gain of minimum 3dBi on both the bands.

The AP should support 20, 40, 80, 160/80+80MHz channelization.

The access point should be able to detect clients that have dual band capability and automatically steer those client to use the

5GHz band instead of the 2.4GHz band.

The AP should provide minimum Tx Power of 23dBm on both the bands

The access point should support 802.1q VLAN tagging

The access point should support WPA-PSK, WPA-TKIP, WPA2 AES, WPA3, 802.11i security.

The Access Point should provide for concurrent support for high definition IP Video, Voice and Data application without needing

any configuration change. This feature should be demonstrable.

The Access Point should support WMM, Power Save, Tx Beamforming, LDPC, STBC, 802.11r/k/v.

Should support 500 or more clients per AP.

Should support IPv6 dual stack from day one

The Access Point should support mesh configuration either directly or through the controller.

The Access Point should support rate limiting, application recognition and control, Access Control lists and device fingerprinting.

Operating Temperature: 0ºC (32ºF) - 50ºC (122ºF). Operating Humidity: up to 95% non-condensing.

Should be plenum rated and comply to RoHS

Should be WiFi certified and WPC approved.

Mechanism for physical device locking using padlock /Kensington lock / equivalent

1 Wifi Access points(10 No.s) (4x4) Nos 10 72750 727500

Digitally signed by AMIT

SINGH 22:32:52 IST

POE Switch BOQ for PFRDA office WTC

Specifications for Switch with 24 1G PoE RJ45 ports and 2 1G SFP slots

Make Unit Qty Rate Amount

Sl. No Specification Required

2 Architecture & Port Density

The Switch should offer Wire-Speed Non-

2.1 Blocking Switching & Routing

Performance at Layer 2 & Layer 3.

The Switch should have minimum 24 1G

2.2 PoE RJ45 ports and should have Two (2)

1G SFP Slots, from Day 1.

Switching Bandwidth: Should provide

3.1 Non-Blocking switch fabric capacity of

20 Gbps or more.

Forwarding Capacity: Should provide

3.2 wire-speed packet forwarding of 14.88

4 Layer 2 features

Should support 1K VLANs with 4K VLAN

Should support 8K MAC addresses or

Shall support IP multicast snooping with

4.3 support for IGMP v1, v2, v3 and MLD v1

Should support Jumbo Frames (up to 9K

Switch should support RADIUS,

TACACS/TACACS+ and

username/password for Authentication,

Authorization and Accounting (AAA)

with Local User Accounts and Local User

Should support secure communications

to the management interface and

system through SSL, Secure Shell (SSHv2),

Secure Copy and SNMPv3

Should support Byte and packet based

broadcast, multicast, and unknown-

unicast limits with suppression port

Digitally signed by AMIT

SINGH 22:32:52 IST

Should support Flexible Authentication

5.4 with 802.1x Authentication and MAC

Authentication.

6 Manageability

Should support manageability using

Network Management Software with

Web based Graphical User Interface

Integrated Standard based Command

Line Interface (CLI), Telnet, TFTP, HTTP

access to switch

management/monitoring

Should support NetFlow or sFlow or

7 Physical Attributes &PoE Power Budget

Mounting Option: The Switch should be

7.1 configured with 19” Universal rack

PoE Power Budget: The PoE Switch

7.2 should provide a minimum of 60 watts of

8 Mandatory Compliance

All categories of Switches, Transceivers

& Switch OS should be from same OEM

The Switch should be quoted with TAC

9.1 Support and Warranty for 3 years with

NBD Hardware Replacement.

Product brochure

Vendor should provide printed technical

10 catalogs/brochures for the quoted

model containing technical

specifications, features.

Specifications for Switch with 48 1G PoE RJ45 ports and 2 1G SFP slots

Sl. No Specification Required

2 Architecture & Port Density

Digitally signed by AMIT

SINGH 22:32:52 IST

The Switch should offer Wire-Speed Non-

2.1 Blocking Switching & Routing

Performance at Layer 2 & Layer 3.

The Switch should have minimum 48* 1G

2.2 PoE RJ45 ports and should have Two (2)

1G SFP Slots, from Day 1.

Switching Bandwidth: Should provide

3.1 Non-Blocking switch fabric capacity of

20 Gbps or more.

Forwarding Capacity: Should provide

3.2 wire-speed packet forwarding of 14.88

4 Layer 2 features

Should support 1K VLANs with 4K VLAN

Should support 8K MAC addresses or

Shall support IP multicast snooping with

4.3 support for IGMP v1, v2, v3 and MLD v1

Should support Jumbo Frames (up to 9K

Switch should support RADIUS,

TACACS/TACACS+ and

username/password for Authentication,

Authorization and Accounting (AAA)

with Local User Accounts and Local User

Should support secure communications

to the management interface and

system through SSL, Secure Shell (SSHv2),

Secure Copy and SNMPv3

Should support Byte and packet based

broadcast, multicast, and unknown-

unicast limits with suppression port

Should support Flexible Authentication

5.4 with 802.1x Authentication and MAC

Authentication.

6 Manageability

Digitally signed by AMIT

SINGH 22:32:52 IST

Should support manageability using

Network Management Software with

Web based Graphical User Interface

Integrated Standard based Command

Line Interface (CLI), Telnet, TFTP, HTTP

access to switch

management/monitoring

Should support NetFlow or sFlow or

7 Physical Attributes &PoE Power Budget

Mounting Option: The Switch should be

7.1 configured with 19” Universal rack

PoE Power Budget: The PoE Switch

7.2 should provide a minimum of 60 watts of

8 Mandatory Compliance

All categories of Switches, Transceivers

& Switch OS should be from same OEM

The Switch should be quoted with TAC

9.1 Support and Warranty for 3 years with

NBD Hardware Replacement.

Product brochure

Vendor should provide printed technical

10 catalogs/brochures for the quoted

model containing technical

specifications, features.

Supply, Installation, Configuration and

Commissioning of CCTV Network

24-Port PoE switches as per specification

Cisco/HP/Ruckus

A including NVR and Cameras As per requirement Nos 2.00 1,77,000.00 3,54,000.00

Total for POE Switch 13,34,250.00

Digitally signed by AMIT

SINGH 22:32:52 IST

Non -POE Switch BOQ for PFRDA office WTC

Make Unit Qty Rate Amount

1.1 Specifications for Switch with 24 1G non-PoE RJ45 ports and 2 1G SFP slots

Sl. No Specification Required

2 Architecture & Port Density

The Switch should offer Wire-Speed Non-Blocking Switching & Routing Performance at

Layer 2 & Layer 3.

The Switch should have minimum 24 1G RJ45 ports and should have Two (2) 1G SFP

Slots, from Day 1.

Switching Bandwidth: Should provide Non-Blocking switch fabric capacity of 20 Gbps or

Forwarding Capacity: Should provide wire-speed packet forwarding of 14.88 Mpps or

4 Layer 2 features

4.1 Should support 1K VLANs with 4K VLAN IDs

4.2 Should support 8K MAC addresses or more.

4.3 Shall support IP multicast snooping with support for IGMP v1, v2, v3 and MLD v1 & v2

4.4 Should support Jumbo Frames (up to 9K bytes)

Switch should support RADIUS, TACACS/TACACS+ and username/password for

5.1 Authentication, Authorization and Accounting (AAA) with Local User Accounts and

Local User Passwords.

Should support secure communications to the management interface and system

through SSL, Secure Shell (SSHv2), Secure Copy and SNMPv3

Should support Byte and packet based broadcast, multicast, and unknown-unicast limits

with suppression port dampening.

Should support Flexible Authentication with 802.1x Authentication and MAC

Authentication.

6 Manageability

Should support manageability using Network Management Software with Web based

Graphical User Interface (GUI).

Integrated Standard based Command Line Interface (CLI), Telnet, TFTP, HTTP access

to switch management/monitoring

6.3 Should support NetFlow or sFlow or equivalent

7 Physical Attributes &PoE Power Budget

7.1 Mounting Option: The Switch should be configured with 19” Universal rack mount kit.

8 Mandatory Compliance

8.1 All categories of Switches, Transceivers & Switch OS should be from same OEM

The Switch should be quoted with TAC Support and Warranty for 3 years with NBD

Hardware Replacement.

Digitally signed by AMIT

SINGH 22:32:52 IST

Product brochure

10 Vendor should provide printed technical catalogs/brochures for the quoted model

containing technical specifications, features.

1.1 Specifications for Switch with 48 1G RJ45 ports and 2 1G SFP slots

Sl. No Specification Required

2 Architecture & Port Density

The Switch should offer Wire-Speed Non-Blocking Switching & Routing Performance at

Layer 2 & Layer 3.

The Switch should have minimum 48* 1G non - PoE RJ45 ports and should have Two

(2) 1G SFP Slots, from Day 1.

Switching Bandwidth: Should provide Non-Blocking switch fabric capacity of 20 Gbps or

Forwarding Capacity: Should provide wire-speed packet forwarding of 14.88 Mpps or

4 Layer 2 features

4.1 Should support 1K VLANs with 4K VLAN IDs

4.2 Should support 8K MAC addresses or more.

4.3 Shall support IP multicast snooping with support for IGMP v1, v2, v3 and MLD v1 & v2

4.4 Should support Jumbo Frames (up to 9K bytes)

Switch should support RADIUS, TACACS/TACACS+ and username/password for

5.1 Authentication, Authorization and Accounting (AAA) with Local User Accounts and

Local User Passwords.

Should support secure communications to the management interface and system

through SSL, Secure Shell (SSHv2), Secure Copy and SNMPv3

Should support Byte and packet based broadcast, multicast, and unknown-unicast limits

with suppression port dampening.

Should support Flexible Authentication with 802.1x Authentication and MAC

Authentication.

6 Manageability

Should support manageability using Network Management Software with Web based

Graphical User Interface (GUI).

Integrated Standard based Command Line Interface (CLI), Telnet, TFTP, HTTP access

to switch management/monitoring

6.3 Should support NetFlow or sFlow or equivalent

7 Physical Attributes &PoE Power Budget

7.1 Mounting Option: The Switch should be configured with 19” Universal rack mount kit.

8 Mandatory Compliance

8.1 All categories of Switches, Transceivers & Switch OS should be from same OEM

Digitally signed by AMIT

SINGH 22:32:52 IST

The Switch should be quoted with TAC Support and Warranty for 3 years with NBD

Hardware Replacement.

Product brochure

10 Vendor should provide printed technical catalogs/brochures for the quoted model

containing technical specifications, features.

Total for Non POE Switch 38,74,500.00

Digitally signed by AMIT

SINGH 22:32:52 IST

Fire Wall BOQ for PFRDA office WTC

ABSTRACT OF COST OF FIRE WALL

Unit Qty Rate Amount

S. No. Specs for 300 concurrent users/devices

Specification of Next-Gen Firewall / UTM

· Copper GbE port- 06 ~ 08 , with Flexi Port Option

· Configurable LAN /DMZ/WAN ports

· Console Ports(Rj45)-1

· USB port-2 ~4

· Rack Mountable on 1U Platform

· The proposed solution shall be of appliance based.

· Proposed appliance should have firmware residing on Solid State Drive (SSD)

· System Memory : 8GB or better

· USB connectivity - minimum of 2 port

2 · VGA Console Port Support .

Specifications/Architecture

· The proposed solution should match the following criteria.

a.Multi-Threads Architecture.

b.Hardware platform must be 64 bit.

c.Ethernet connectivity (Copper GbE) - Minimum of 6 ~ 8

d.Proposed solution should have option of Dual Power Supply and optional Hot Swappable.

· The proposed solution should have Product with Perpetual License.

· The Total Solution shall be on-premise and shall not have any requirement to connect to any third party network for

functional purpose.

· The proposed solution must-havetool to manage (FW configuration, Upgradation, troubleshooting etc.) and monitor

3 General Requirement

of application, session and user traffic .

· The proposed solution must have On-appliance Logging and reporting Feature and should not require any

Log reporting server additionally.

· Product must have inbuilt AAA / HotSPOT Gateway and SD-WAN Solution .

· Firewall Throughput : 10.0 ~ 30.0 Gbps

· New Sessions /Second : 1,00,000~ 1,50,000

· Concurrent Session : 1,00,00,000~1,25,00,000

· VPN Throughput : 1500 ~ 3000 Mbps

4 System Performance · GW AV Throughput : 3000~ 5000 Mbps

· IPS Throughput : 3000~ 5000 Mbps

· Storage ( SSD) : 128 ~ 250GB

· Memory (Min/Max) : 4 / 8GB

· Stateful Packet Firewall

· Multiple security Zones

· Security polices-IPS, Web filtering , Application Filtering ,Anti-virus /Anti-Spam

· Access scheduling

· NAT: Network address Translation

· Policy based NAT ( Source and destination)

· Gateway specific NAT policy

· Port Forward and Intercept Support

5 Firewall & NAT · One-to-one NAT

Digitally signed by AMIT

SINGH 22:32:52 IST

5 Firewall & NAT

· Mac and IP-Mac Filtering

· IP- MAC Interface Binding

· Geo-IP Filtering:Geo Location based traffic control .

· Connection Per Second and time based firewall Rules

· Zero Day Protection (ZDP)

· DNS Security

· WRR based Multi Load Balancing

· Automated failover / Fallback,

· Inbound Link Load balancing (ILLB) / DNS-based inbound load balancing

· IP address assignment- Static, Dynamic & PPPoE ,

· Policy-Based Routing (Based on Zone ,Interface, IP/ MAC Address, Protocol or Port).

· Static Routes

· Source / Destination-Based Routing

· BGP routing Support

6 Networking & Routing · Proxy ARP

· Multiple DHCP server support ( Should have Black List ,white List and Known Mac option).

· Supports HTTP/s Web Proxy ( Traditional and Transparent Mode) .

· Dynamic Routing: RIP v1&v2 OSPF ,BGP .

· Multicast forwarding (IncludeOver SSL VPN).

· IP Pass-through Support.

· Reverse Proxy /WAF Support.

· Ethernet LAG (Link Aggregation Group)Support

· Signatures: Default (3000+), Custom signatures / Polices

· Automatic real-time updates & e-mail notification and Offline Mode Update Option

IDPS (Intrusion Detection

7 · Traffic / Protocol anomaly detection and protection

& prevention System)

· IPS actions: Recommended, Allow Packet, Drop Packet, Disable

· Flooding detection and protection

· The Proposed Solution should Support Transparent and Non- Transparent Mode Web Proxy .

· The proposed solution must work as standalone HTTP proxy server with integrated .

· Web Authentication & inbuilt Web category Database support .

· Control based on URL/Content , Keyword .

· Control Based on Mime and File Extension Type : For both upload /Download Traffic .

· Protocols supported:HTTP,HTTPS.

· The proposed solution should have a local database integrated into the system to avoid frequently querying a

database hosted elsewhere.

· The proposed solution should have option to make Own custom database as per their need.

· Group-Based and User-Based Web Content Filter

· Time-Based Access Control with Multiple Time Intervals

· Unlimited Policies & User creation

· CIPA compliant, Pornographic image blocking .

· Google Safe search enforcement&Restricted Youtube for Users

8 Web & Application Filtering · Web Blocking Database Update ( Both Online and Offline Mode)

· Should support custom database web category upload option

· HTTPS/SSL Interception Support

· Content Filtering based on Weighted Phrase

· The proposed solution must be capable of blocking the following types of applications.

a. Application that allow file transfer.

b. Online Games.

c. Instant messengers

Digitally signed by AMIT

SINGH 22:32:52 IST

d. Peer-peer(P2P) applications ,Tor and Torch Browser.

e. Browser Based proxy (regardless of Ip address or port Number).

f. Web2.0 based applications (Facebook etc).

g. Application that provide Remote control.

h. All type of streaming media (Both Web and Software Based).

· SMTP/POP3 mail intercept

· Image-spam filtering & Spam tag support

Mail Security & Gateway

9 · Filter based on message header, size, sender, recipient etc.

· Blacklist / White list support

· Spam Tag support

Anti-virus and · Real time checking or scanning at Gateway

anti-malware · Ability to Scan while downloading

10 · Ability to Scan archive files

· Should not have size limitation on files for scanning

· AV signature Update (Both Online and Offline Mode)

Anti-spam & · Simple configuration and management

E-mail Security · Content based anti-spam

11 · RBL based anti-spam

· Trusted domains/users list

· Bandwidth Management and Throttling

· Guaranteed Bandwidth Based on rule Set

· Ingress traffic policing

Traffic Management / · Priority- bandwidth utilization ( User / Application)

Quality of service (QoS) · Preset File Sharing rules.

· Classified and Unclassified Bandwidth support

· Policy For Known and Unknown Ports

· Hot Standby Active-Passive mode

· Support HA on WAN, LAN & DMZ

· Device failure detection and notification

· Heart Beat & Preempt mode support

· Link monitoring

13 High Availability (HA)

· Auto-Sync configurations

· Device /Interface Failure Detection & Alerts

· Support both Member of Tracker & IP Migration

· IP Migration designed for Wireless networks as well

· Auto Sync Configuration.

· Comprehensive network monitoring; Logging record should at least contain Source IP, Destination IP, Type of

Service, Timestamp, Type of Protocol, Port information etc…

Monitoring and · Customized flow

Management · Link Failure Detection

· Device failure Detection

14 · Actions: log/alert/SMS/reporting/logging

· Web based access

· Should support efficient searching and filtering to locate specific events in log record

· Should support bandwidth management per user, group, IP address, website Category, application & application

Digitally signed by AMIT

SINGH 22:32:52 IST

VPN ( Virtual Private

15 I- IPSec VPN:-

· Support for Automatic and static IP

· Remote ID and Local ID Support

· Dead Peer detection (DPD) ,IPSec NAT traversal & PFS support

· VPN Failover/ Connection redundancy & auto reconnect

· Interop with other IPSec devices

· FQDN support for tunnel end point /Remote WAN,

· VPN connection redundancy,

· Encryption Support- 3DES/DES /AES

· Authentication Support – SHA1 /MD5

· Support Key Exchange -IKE, Manual Key, PKI

· True SSL/TLS VPN

· Encryption: 3DES, AES etc.

· Key Management & Certification authority.

· TCP & UDP tunneling.

· SSL VPN must support Site-to- Site and Client-to – Site VPN tunneling .

· Both server and client ends works with Dynamic Public IP

· Granular access control based on IP, Port &Time .

· Connection tracking based failover to SSL VPN over Captive MPLS VPN .

· Ability to Forcefully disconnect selected SSL VPN Clients.

· Bi -directional communication channel for data and voice over SSL VPN .

· VPN client support for Windows, Linux , Android& Mac OS.

· Auto VPN Failover / failsafe / VPN redundancy support.

· Network access- Split and Full Tunnel Mode.

· Huband Spoke support.

· QoS support for SSL VPN Tunnel

· Support for VPN over HTTPS Proxy

· Multiple Server Support Scalability

· Support to the most advanced and standard cipher algorithms

Encryption: 3DES 192, AES 128/256-bit, SHA1/256/384/512

Authentication: Pre-Shared Key, Certification Authority, SMS OTP* , GoogelAuth , MAC Address

· PPTP VPN with unlimited Tunnel License

· Forcefully Client disconnection Option

IV- WIRED GUARD VPN

· Must support Site-to- Site and Client-to – Site VPN tunneling

V-Other VPN Support

· 3G/4G USB Dongles with USB Tethering support .

16 Wireless WAN (W-WAN)

Digitally signed by AMIT

SINGH 22:32:52 IST

16 Wireless WAN (W-WAN) · Primary WAN Link

· WAN Backup Link

· Proposed Solution Should have Inbuilt AAA ( Authentication, Authorization and Accounting ) System.

· Should have Captive PortalSupport .

· Customisable Users Login Page .

· Support both Wired | Wireless Network.

· Manageable Internet access | Usage Plan.

· Captive portal support based on IP address or IP Segment (multiple Captive portal support based on IP or IP

· Support to redirect the URL as per user requirement (Original request URL / Welcome Page / specific URL)

· Should SupportUser Management options Like - Create| Activate| Suspend| Archive Users.

· Should Support On Appliance User Database with option to upload database in .xls format.

· Should Support Customized Packages options like : Define internet access plan based on Bandwidth ,Time &

· Product should support below QoS methods

a.Bandwidth Management

b.Bandwidth Priority

c. Guaranteed Bandwidth

d. Dynamic Bandwidth Control (automatically adjust the bandwidth based on users)

e. No Ideal bandwidth waste

· Should haveBandwidth management with : Committed |Individual| Shared Bandwidth with Scheduling & Fair

· Should haveCoupon Management with - Instant coupon generation in printable formats & System generated

· Should have Packages management with : Self registration |OTP | Social Login |Pre-Paid & Post Paid

· Should have Per-User and Global Bandwidth Limiting.

· Group Management support per department wise with dedicated bandwidth allocation & separate admin panel to

manage created users.

· Should have option ofTime Based ( Office | Non-office Hours ) Bandwidth (min and max) for a particular User |

HOTSPOT /BYOD ( User · Device Blocking Support like Mobile / Tablet / Gaming console (BYOD) blocking during specified hours (HoS)

· To support check for MAC binding and MAC based authentication only for BYOD and allow the same user to login

via standard browser login from Office network

· IP Segment based login restrictions for selected user Ids (means user A is allowed to authorize only from few

configured IP segments)

· Device Blocking Support like Mobile / Tablet / Gaming console (BYOD) blocking during specified hours (HoS)

· Able to Auto-bind MAC address of 5 devices per user on BYOD level

· MAC-Address Based User Accounts .

· Auto Login Support based On MAC/IP.

· Auto MAC/IP Binding Support.

· User Accounts Upload / Import/Export via CSV .

· Automatic Client Network Configuration .

· Pre / Post-Paid and Free Tickets .

· Time / Traffic Based Tickets .

· Configurable Ticket Validity .

· Terms Login Support.

Digitally signed by AMIT

SINGH 22:32:52 IST

· Fair Usage Policy( FUP).

· Cyclic/Recurring Tickets (Daily | Weekly | Monthly |Yearly) .

· Time Quota( Daily | weekly |Monthly | Total | Lifetime).

· Data Quota( Daily | weekly | monthly | Total |Lifetime).

· Black List Management Support based On MAC| IP.

· Should support Self Registration Portal with options like

a. Create Mobile Account based on OTP

b. User Account creation with IT admin approval process

c. Prepaid Coupon with OTP Registration

d. Account Recharge on demand

· Remember User after First Authentication .

· Authentication Server Support (Local, LDAP/AD).

· Should Support option to Disconnect / Suspend ‘Logged In’ User for Particular time Period

· This system should support integrationmore than 3+ SMS Gateways with Click-n-Configure.

· Should support Auto login blacklist of infected machine user(s)

· Should Support On-Appliance Connection Logging , Logs and reports

· Three levels of users creation with preset permissions

· Multiple users login Option

· Web UI (HTTP, HTTPS & VGA)

· Command line interface (Console)

18 System Management

· Configuration Backup & Rollback

· Firmware upgrade via web GUI

· Manual upload of Anti Virus Signatures | IDS& IPS Signatures | Web Blocking Database

( Both Online and Offline Mode)

· Comprehensive Local logging / Should have Inbuilt-onAppliance Reporting.

· Email Alert-Multiple Mail ID

· Built-in daily Digest report / Daily digest reports on email

· Remote Sys log support

· Real-Time traffic monitoring ( Source IP /Port)

· Should have Built-in Network Tool– like TCP Dump, Live Network Sniffer etc .

· Should comes with all debugging tool inbuilt with live network real time net flow on IP and Port basis

· Should support Live Sniffer with users level Packet Per Second (PPS) to identify virus infected machines

· Should have option of Security Reports for Suspicious Activities.

Logging / · Graphical real-time and historical Monitoring

Monitoring/Reporting /Alert · Log Viewer- different kinds of logs including System boot long, firewall log, IDS/IPS, VPN, Web Proxy logs, Antivirus

, Anti-spam, HA log, System and Admin events, IM activities Log etc

· Remote Management.

· Alerts on Interface status |Appliance reboot status | Power status | High Availability transition etc.

· Real Time Net flow on Individualinterface wise data, which ensure the Top user based on Bandwidth Utilization |

Packet Per Second |Usage per TCP /UDP Ports | Applications .

· Should support Forensic analysis with quick identification of network attacks and other traffic anomalies.

· Should support complete Monitoring & Reporting Framework built in (NMS) at no extra cost (Detailed logs and

Reports as per regulatory compliance)

· Should support mobile aware login pages and alert email / SMS on link failures

20 General configuration · Software /Firmware upgrade using UI ( Should Not mandatory Over Internet)

· The Proposed solution must have option to Upgrade Firmware /Patch/ Signature

throughOffline mode via Local Storage Media or Local LAN (Should not mandatory Over Internet) .

· Product Functionality ( Like AV, Basic Web Filter and IDPS) should be work even if

Non renewal of “Total security subscription suit” ( Only its Update should be stop).

· Device should not be going into a router mode in case the license is not renewed.

Digitally signed by AMIT

SINGH 22:32:52 IST

· Daily / weekly / Monthly backup on email and FTP (configurable option) .

· All the configuration change logs should be provided in the Appliance

· Daily configuration backup archived by the product itself and can be downloaded on –will.

· Configuration snapshot on box itself

· Data Quota Transfer per Interface wise with alert mechanism to admin

· System Security with HTTP / HTTPS / SSH access restriction to allowed IPs only

· User/IP/MAC binding functionality to map username & IP address & MAC address

· Show Configuration options to provide a printable record to the user on all the current running routing &

Firewall configurations

Warranty & · Should provide all upgrades and/or patches free during Warranty period;

· Provisions for 4-year extended Subscription / warranty should be available after the 1 year Default Warranty / Total

security subscription suit

· The OEM / Partner should provide Onsite technical support.

· The OEM /Partner should have regional presence.

· Internet Security should continue to work .All the port should not be Open from Un-trusted (WAN) to Trusted

network (LAN) or Vice-versa.

· Basic Web content filtering services should not be disable web filtering protection due to subscription expiry and

allow users to browse insecure & unsafe Internet. Only Update should be stop once subscription expired.

22 On subscription Expiry.

· Gateway Antivirus / Intrusion prevention should not be disable . GW scanning due to subscription expiry.Only

Update should be stop once subscription expired.

· Basic HA should work even after Subscription Expiry.

23 Dimension · Not exceeding 1U; Rack Mountable

24 Basic Training* On Firewall · To be provided by OEM/Partner Onsite

Digitally signed by AMIT

SINGH 22:32:52 IST

SUMMARY OF BOQ FOR ELECTRICAL WORKS FOR OFFICE FOR PFRDA AT WTC, NEW DELHI

S.NO. SUB HEAD NDSR AMOUNT (Rs.) DSR AMOUNT (Rs.)

1 MAIN PANEL & DISTRIBUTION BOARD Rs. 9,67,227 Rs. -

2 CABELS / MAINS Rs. 6,27,653 Rs. 4,008

4 LIGHTING FIXTURES Rs. 20,07,420 Rs. 3,45,150

5 WIRING FOR DATA AND VOICE OUTLETS Rs. 7,02,585 Rs. 26,25,962

6 CABLE TRAY.& RACE WAY. Rs. 15,18,846 Rs. 1,10,340

7 ACCESS CONTROL SYSTEM Rs. 17,33,469 -

8 FIRE ALARM & PA SYSTEM Rs. - Rs. 20,98,512

9 UPS & INVERTER SYSTEM Rs. 22,02,756 Rs. -

10 CCTV System Rs. 8,59,075 Rs. 2,64,000

GRAND TOTAL Rs. 1,95,88,374

GRAND TOTAL Rs. 1,95,88,374

Digitally signed by AMIT

SINGH 22:32:52 IST

VASTU MANDAL arc hitec ts, interior d esig ners

F-328, Old MB Road . Lad o Sarai. Mehrauli, New Delhi 110030

Telfax 41665455 Email :vastumand al@g mail.c om

PROJECT - PFRDA AT WTC, NEW DELHI _ELECTRICAL WORKS ESTIMATED COST

DSR-2022 Description

S.No No. Unit Qty Rate MR Amount DSR Amount

1 MAIN PANEL & DISTRIBUTION BOARD

1.1.1 Supply,installation,testing and commissing of 3phase and neutral 415V 4 wire free standing

floor mounted indoor MV panel made out of 14 SWG sheet after seven tank process and

painting with epoxy powder coating MV electrical panel shall be dust and vermin proof

,hinged and locable doors.The panel shall consist of suitable rating TPN bus bar at the rating

of 0.8A /SQMM Supported by DMC/SMC insulator and color coded with heat shrinkable

sleeves. Metering shall be provided as specified .The panel shall have short circuiting with

standing capacity of minimum 36KA and consist of the switch gear as mentioned below .The

panel shall got fabricated from manufacturer with CPRI test certificate .The panel shall be

mounted on U channel including supply and fixing of the same.(including Capacitor banks)

− 250 Amps 4P On Load change over switch. -1No.

− 250 Amps 4P 36KA MCCB. -1No.

− Spreaders-1Set.

− Extended Rotary Operating Mechanism.-1Set

− Digital V A F Meter with built in Selector Switch, CTs, CT shorting links, R/Y/B LED indicating

lamps and control SP MCBs.

Outgoing Section

− 63 Amps FP MCB_C curve -4Nos.

− 80 Amps FP MCCB -1No.

Digitally signed by AMIT

SINGH 22:32:52 IST

− 125Amps 4P25KA MCCB-3Nos.

− 8 Step Automatic Power Factor Correction Relay (Digital)_1 No

− 63 Amps TP MCB -3Nos.

− 32 Amps TP MCB -4No.

− 10 kVAR capacitor duty Contactor with 220 V AC Coil_3 Nos

− 5 kVAR capacitor duty Contactor with 220 V AC Coil_4 Nos

− ON / OFF LED Indicating Lamps _7Set

− Start / Stop Push Buttons_7Set

− A/M Selector Switch_1 No

− Control S/P MCB (2/4 A)_7 Nos

− Neutral Links_7 Nos

− Control Blocks_7 Nos

- Enclosure, 300A TPN 415V 50Hz Electrolytic grade AL conductor Busbar with 100% neutal&

Non adhesive PVC insulated heat shrinkable sleeves, Internal Wiring, Terminals, etc.as SET 2.00 2,40,509.67 4,81,019.33

1.1.2 Supplying the following MCCBs in sheet steel enclosure. For Ups Input & Output

125A 4P MCCB in sheet steel enclosure surface mounted on the wall along with incoming &

a) outgoing Cable Box, suitable for Termination of Aluminium / Copper Cable. (For Ups Input ) No. 4.00 15,015.05 60,060.22

b) UPS Output panel

- 125 A 4P Onload changeover switch in sheet steel enclosure surface mounted on the wall

along with incoming & outgoing Cable Box, suitable for Termination of Aluminium / Copper

- Outgoing Section

- 80 Amps FP MCCB -3No.

- Spreaders-3Set.

- Extended Rotary Operating Mechanism.-3Set

Digitally signed by AMIT

SINGH 22:32:52 IST

Enclosure, 200A TPN 415V 50Hz Electrolytic grade AL conductor Busbar with 100% neutal&

Non adhesive PVC insulated heat shrinkable sleeves, Internal Wiring, Terminals, etc.as SET 2.00 36,063.18 72,126.36

1.2 DISTRIBUTION BOARDS.

Supply , installation ,testing and commissioning of 'MCB double door Distribution Boards

dust and vermin 'proof protected and AC supply operation including incoming

MCB/ELCB/RCBO/MCCB as per specifications and required capacity Neutral bar and Earth

Terminal complete as required and installed in concealed in wall after necessary chase

cutting with finishing /surface on wall including all fixing materials required.

12Way VTPN MCB DB with 80A 4P MCCB(36KA) as incoming and 36 nos (6-32A)SP MCB as

outgoing.(For UPS DB)

12Way VTPN MCB DB(Vertical type) with 63A 4P RCCB as incoming and 36 nos (6-32A-10KA

)SP MCB as outgoing.(For LPDB)

12Way TPN MCB DB(Vertical type) with 63A 4P RCCBas incoming and 36 nos (6-32A-10KA )SP

MCB as outgoing.(ACDB)

12Way SPN MCB DB with 40A DP RCCBas incoming and 10nos (16-20A-10KA )SP MCB as

outgoing.(For Server)

Total of Main Panel/ DB carried over to summary 9,67,227.40 0.00

3.0 CABELS / MAINS

Supply ,laying,testing and commissoning of 1100V grade armoured cable having sector /

circular shaped aluminium / copper conductor PVC insulated cores under ground PVC

tape wrapped inner sheathed, GI strip / wire armoured and overall extruded PVC sheathed

confirming to IS: 1554, laid on wall or ceiling using GI clamps and spacers as per route shown

at site and further as directed by Engineer-in charge

a 185 Sq.mm 3 1/2 core Aluminium cable mtr. 100.00 1,741.42 1,74,141.88

b 35 Sq.mm 3 1/2 core Aluminium cable mtr. 100.00 434.66 43,466.26

c 1 6Sq.mm 4 core copper cable mtr. 100.00 308.01 30,800.82

d 25Sq.mm 4 core copper cable mtr. 100.00 396.60 39,660.18

e 4 Sq.mm 3 core Copper cable (For AC Units) mtr. 600.00 473.43 2,84,057.49

Supply & fixing of end termination for above mentioned cables including compressed type

3.1 brass glands, crimping type coper lugs, insulation tape etc. as 'required complete with

earthing of glands in following sizes

Digitally signed by AMIT

SINGH 22:32:52 IST

Total of Cables / Mains carried over to summary 6,27,652.70 4,008.00

Point wiring for light point /Fan/Exhaust Fan point/ call bell point using 2 runs of 1100 V

grade 1.5 sqmm & one run of 1.5 sq.mm FRLS insulated multistranded copper wires, in &

including 25 mm dia , MS conduit surface/ concealed in wall / ceiling conferming to IS 732

including all accessries such as junction boxes , conduit bends, elbows and ceiling rose ,

and anodised GI switch box with modular switch ,modular plate and the box covered with

a 1.3.3 One light point controlled by one 6A switch Per Pts 275.00 1,845.00 5,07,375.00

Secondary light point controlled by same switch

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

4.2 1.7 insulated copper conductor, single core cable in surface/ recessed steel conduit as

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Per

2 X 4 sq. mm + 1 X 4 sq. mm earth wire Per

4.3 1.3.3 Exhaust fan point including of ceiling rose near fan. Per Pts 10.00 1,845.00 18,450.00

Wiring for twin control point wiring using 1.5 sqmm copper conductor FRLS PVC insulated

copper conductor cable drawn through 25 dia MS conduit laid in surface/concealed over

4.4 1.4 false ceiling or in slab/wall chases including ,2way modular switches,modular plate ,suitable Per Pts 4.00 1,981.00 7,924.00

GI box and earthing the point with 1.5 sqm FRLS PVC insulated copper conductor single core

cable as required

Supplying and fixing following modular switch/ socket on the existing modular plate & switch

box including connections but excluding modular plate etc. as required.

c 1.24.4 3 pin 5/6 A socket outlet Each 25.00 122.00 3,050.00

Digitally signed by AMIT

SINGH 22:32:52 IST

d 1.24.5 6 pin 15/16 A socket outlet Each 40.00 197.00 7,880.00

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate

for modular switches in recess etc. as required.

Supplying and fixing following Modular base & cover plate on existing modular metal boxes

etc. as required.

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

4.8 1.19 insulated, shielded with fine tinned copper braid and protected with PVC sheath in the Meter 200.00 47.00 9,400.00

existing surface/ recessed steel/ PVC conduit as required.

4.9 MR Supplying and laying HDMI Cable with connector on both ends. Meter 105.00 307.06 32,240.92

1.20 Supply and fixing of following sizes of MS conduit along with accessories in surface /recess

4.10 including painting in case of surface conduit,or cutting the wall and making good the

same in case of recessed conduit as required

Supply and fixing of 3 nos. 6A socket with 6M modular GI box, base plate and cover plate

below worktop, along with 1no. 6A socket, 1 no. 6A switch and 1 no. 16A switch(for 3 nos.

sockets) in 4M modular GI box, base plate and cover plate above worktop complete as per

drawings and instructions of engineer in charge.

Total of Wiring carried over to summary 3,80,320.92 31,41,050.00

5 LIGHTING FIXTURES

SITC of 1'X4' recessed mounted Luminaire with Maximum 36 Watt with Lumen output of 3600

lumen. The product should be SMD based and have non integral isolated driver with 2KV

inbuilt surge protection. THD<10%, PF >0.9,Product should have life class of 50K burning hour

at L70 B50 parameter, Luminiare operating temp 0 D to 45D. Internal wiring should have

teflon coted multi strand wires and external wire should have PVC coated multistrand wires.

SITC of Recessed mouted PDC lowdepth(height should not be more than 35mm) downlights

with maximum 12 Watt with minimum 1320 lumen.The product should be SMD based & have

non integral isolated driver with 2KV inbuilt surge protection. THD<10%, PF >0.9,Product

5.2 MR should have life class of 50K burning hour at L70 B50 parameter, Luminiare operating temp 0 Nos. 110.00 855.15 94,066.95

D to 45D. Internal wiring should have teflon coted multi strand wires and external wire should

have PVC coated multistrand wires.

Digitally signed by AMIT

SINGH 22:32:52 IST

SITC of Extruded Aluminium surface mounted 36Watt, 4000 lumen LED batten with PC Diffuser

and Spring Steel Clamps for Surface Mounting arrangement. Driver THD<15%, PF >0.9,with

5.3 MR 2KV inbuilt surge protection. Internal wiring should have teflon coted multi strand wires and Nos. 584.00 994.45 5,80,756.37

external wire should have PVC coated multistrand wires.

Supply, Installation, Testing and Commisioning of Suspended /surface/Recessed type linear

Luminaire of size 72mm (N.S.), Linear ultra modular fixture made up of extruded aluminium

housing with luminare efficasy more than 100 LPW, CRI >80, CCT of 5700K. suitable for 220 V,

50 Hz, The luminare rated life (L70) >50000 Hours with High efficiency driver with inbuild surge

protection, over voltage protection, short circuit protection and operating at >0.95 .making

suitable arrangement for fixing including connection with 3 x 1.5 sq.mm. The price shall

include all accessories including jointing kit for uniform continuous lines of light across ceiling

etc complete in all respect

Providing & Fixing Coverings (Ceiling & Wall) Made out of Polyester Kintted fabric Coated

with polyurethane (PU). The Fibric width 2m,3m,4.1m,&5.1m with Weight of 200gm/m^2.

thickness of 0.3mm. The appearance of fabric is Matl. smooth and uniform with blance color

and ligth transmission of 50%. The tear strength of fabric should be accordance to CH.

4.5daN; TR: 6.5 daN. The fire Railing should be accordance to B-S1, do. The febric should be

humidity ressistant and free of cercinogenic subtance (CMR) or volatile organic compounds

(VOC's). At lableing in accordance with the French decree no, 2011- 321, Oeko -Tex

standar100 certified. The fabric should be paintabe/printable with approved manufacturer

5.5 MR guidelines with 10-year manufacture guarantee. the Installation of fabric should be dry Sqm 2.00 12,296.99 24,593.99

installation 7done at room tamperature using CLIPSO PVC, ASB tension profiles P.CC/P-

C10QS/P-C11QS/P-CCB022/P-B1/P-CC1P. There are several lighting options available

including various LED options and fluorescent lighting. When Positioned properly. LED

Lighting modules provide an even light flow, casting no shadowns or hot spots. coverings are

used for a variety of aluminated applications, including but not limited to walls, ceiling,

lightboxs or wall frames. coverings can enhance your door with a variety of spacial effects

fiber optics or changinglights, or create a statement piece incorporating custom printing.

The cost of electrical cove light fixtures is included in the same.

Supplying,installation,testing an d commissioning of Passive Infrared(PIR) technology based

occupancy sensor having high preformance, non regulating programmable type, suitable

5.6 15.1 for connected load upto 10Amp , for mounting height up to 2.8 mtr and for 5 m diameter EACH 75.00 4,602.00 3,45,150.00

coverage area along with necessary fixing arrangements i/c programming at site etc.

complete as required.

Providing & Fixing Heavy Duty 4 Blade, 15" Exhuast Fan complete with all hardware and

connectors etc., as per the direction of the engineer In charge

Digitally signed by AMIT

SINGH 22:32:52 IST

Providing & Fixing of 7W - 10W cylindrical surface/ suspended light fixture having a minimum

5.8 MR of 630 lumens of dimensions - 35(L) x 20(w) x 20(h) mm as per the approval of the engineer In each 48.00 2,096.64 1,00,638.53

Supply, installation, testing and commissioning of Multi Sensor Standard configuration (T, Rh,

PM2.5, TVOC, CO2 and AQI) Display Model - with Modbus RS485 output.

Total of Light Fixture carried over to summary 20,07,419.58 3,45,150.00

6 WIRING FOR DATA AND VOICE OUTLETS

Supply and fixing the following sizes of PVC medium duty ISI marked conduits (IS : 9537 Part-

III) complete with accessories such as bends, junction boxes, pull boxes etc., in recess or on

surface including cutting chases in the walls/floors and making good the same complete as

Supplying and drawing of CAT 6A U/UTP cable, white jacket, 4 pair LAN Cable in the existing

surface/ recessed Steel/ PVC conduit as required.

Supply & fixing of Plug in type information outlet (campatible with data cables) in existing

faceplate/ GI Box in wall/furniture/floor complete as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch

box including connections but excluding modular plate etc. as required.

a 1.24.6 Telephone socket outlet Each 285.00 148.00 42,180.00

7.5 Supply and fixing of the following types Face Plates complete with all accessories.

Supply & Fixing of Single Faceplate, Single Port square plate having spring shuttered front

a access for preventing ingress of dust, dimension as per commercially available modular Nos. 114.00 90.04 10,264.51

office furniture.

Supply & Fixing of Dual Faceplate, Duplex Port (for data and for voice) or as required square

b. plate having spring shuttered front access for preventing ingress of dust, dimension as per Nos. 255.00 90.04 22,960.10

commercially available modular office furniture.

Supply ,laying ,installing , testing and commmissioning of the 50 pair multi core 0.61 mm

annealed copper conductor PVC insulated and PVC sheathed armoured telephone cables

7.6 generally conforming to ITD S/WS-11-C and IS 1554 part I direct in ground /surface and / or in mtr. 200.00 457.57 91,513.12

existing pipe as required and includig making terminal joints, complete as required.

Digitally signed by AMIT

SINGH 22:32:52 IST

Supplying, installing, testing and commissioning of 24 port Cat 6A patch panels available

with block of four equipped with tool less IO, Rack Mountable. 19" Modular Patch Panel,

loaded CAT6A U/UTP 24 port LCS2 rack mountable to be compatible in 4nos of 6 X RJ 45 Tool

less connector U/UTP unit in a block.

Supplying, installing, testing and commissioning of Cabinet. Size 2026 X 800 X 800 mm

(HXWXD) following accessories, Width (mm) 800, Depth (mm) 800, Approx.Net Wt (kg) 150,

CRCA 'D' Grade thickness (mm) 1.2, RAL 9017(Matt Black), Glass: 4mm Toughened Tinted

Glass Door,Injected one piece polyurethane gasket on frame, Accessories: Cooling Fan

(230V A/C 90 CFM) - 4 Nos, Cable Manager Metal- 4 Nos,PDU 230VAC - 1 No (12 nos. 6A/16A

sockets with plugs 6A/16A - 1/1pc & MCB 16A/32A -0/1 Pc), cable channel 100mm wide 42U-

2 Nos,Heavy Duty Stationary shelf M6 screws,washer,cage nuts (nickel coated))3 Nos.

Earthling Strips 150mm H - 1 No, Door Lock - 1 No, Castor Wheels (with Brake) - 2 Nos, Castor

Wheels (without Brake) - 2 Nos, Front Metal Band - 1 No. Packing: 5 ply cardboard & Inside 28

ply EP foam. In the rack there must be maintained 1 U = 1.75 inches space. Nos. 1 etc

complete as required

Supplying, installing, testing and commissioning of Cabinet. Size 24U (800 X 800 mm) (WXD)

following accessories, Width (mm) 800, Depth (mm) 800, Approx.Net Wt (kg) 75, CRCA 'D'

Grade thickness (mm) 1.2, RAL 9017(Matt Black), Glass: 4mm Toughened Tinted Glass

Door,Injected one piece polyurethane gasket on frame, Accessories: Cooling Fan (230V A/C

90 CFM) - 4 Nos, Cable Manager Metal- 4 Nos,PDU 230VAC - 1 No (12 nos. 6A/16A sockets

with plugs 6A/16A - 1/1pc & MCB 16A/32A -0/1 Pc), cable channel 100mm wide 24U- 2

Nos,Heavy Duty Stationary shelf M6 screws,washer,cage nuts (nickel coated))3 Nos. Earthling

Strips 150mm H - 1 No, Door Lock - 1 No, Castor Wheels (with Brake) - 2 Nos, Castor Wheels

(without Brake) - 2 Nos, Front Metal Band - 1 No. Packing: 5 ply cardboard & Inside 28 ply EP

foam. In the rack there must be maintained 1 U = 1.75 inches space. Nos. 1 etc complete as

Total of Data & Voice carried over to summary 7,02,585.42 26,25,961.91

8 CABLE TRAY.& RACE WAY.

Supply, fabrication and fixing of steel frame work in position for cable tray/Panels fabricated

out of 10 mm dia GI rods, ISA-40 MS angle iron, ISMC-50 channels, flats etc.complete with

providing of Anchor fastners and all necessary hardwares as required for fixing, including

cutting, bending, welding, drilling, bolting etc. as per design as required and painted with

one coat of primer and two coats of enamel paint of approved shade.

Digitally signed by AMIT

SINGH 22:32:52 IST

Supply and fixing of Perforated type 2mm thick Hot dip Galvanised G.I. cable tray of

following sizes complete with bend/tee joints, coupling plate & nuts bolts etc. as required for

fixing and including the cost of providing loop earthing with 2 nos. 50 mm x 6 mm GI earth

strips complete as per specifications, as required and as below.

8.2 GI Raceway & Junction boxes ( Raceway on floor shall be of aluminium only)

Providing and fixing 2 mm thick steel sheet factory fabricated post galvanized raceway with

internal partition/compartmentized of the following sizes including providing removable 3

mm thick GI cover, knock out holes and fixing accessories earthing with 8 SWG copper earth

wire complete as required including floor supports, bends, access boxes, tap off boxes and

cross over as per specification and site requirement. (overhead / wall mounted recovery &

function boxes shall be 1.6 mm thick)

a) 300 mm wide x 38 mm deep raceway RM 165.00 2,506.51 4,13,573.93

b) 225 mm wide x 38 mm deep raceway RM 50.00 2,110.90 1,05,544.82

c) 150 mm wide x 38 mm deep raceway RM 225.00 1,603.10 3,60,697.55

d) 100 mm wide x 38 mm deep raceway RM 150.00 1,159.48 1,73,921.63

Providing and fixing 400 x 400 x 60 mm deep 2 mm thick GI sheet junction box including

providing 3 mm thick stainless steel cover as per specification.

Providing and fixing 350 x 350 x 60 mm deep 2 mm thick GI sheet junction box including

providing 3 mm thick stainless steel cover as per specification.

Providing and fixing 150 x 150 x 60 mm deep 1.6 mm thick GI sheet junction box including

providing 3 mm thick stainless steel cover as per specification.

Total of Raceway carried over to summary 15,18,846.47 1,10,340.00

Digitally signed by AMIT

SINGH 22:32:52 IST

Sr. No 2018. Description Unit Qty Unit Rate NDSR Total amount DSR Total amount

Sr. No 2018. Description Unit Qty Unit Rate NDSR Total amount DSR Total amount

7 IP BASED CCTV SYSTEM

7.1 1.20 Supply and fixing of following sizes of MS conduit along with accessories in surface

/recess including painting in case of surface conduit,or cutting the wall and

making good the same in case of recessed conduit as required

7.2 Supply, installation, testing and commissioning of 2MP 2.8mm/3.6mm wide angle

fixed lens IR Dome Camera 1/3" Progressive Scan CMOS;

H.265+/H.265/H.264+/H.264/MJPEG; Colour: 0.01 lux @(F1.2, AGC ON), 0 lux with IR;

25fps/30fps(2560×1440, 1920×1080); 3 VCA functions; 3 streams; 3D DNR; ICR; EXIR

2.0, up to 30m; DC12V&PoE; Built-in micro SD/SDHC/SDXC slot.

7.4 Supply, installation testing and commissioning of Network Video recorder Linux

based to manage and control all the cameras from control room. Software shall

support maximum 32 channel with joystick controller. 256Mbps Bit Rate Input

Max(up to 32-ch IP video), 4 SATA Interfaces, alarm I/O: 16/4, 1.5U case,19" with

4x6TB i.e. 24TB HDD inside Nos. 1 Rs. 1,21,803 Rs. 1,21,803

7.5 Supply, installation testing and commissioning of Network Video recorder 16-Ch, 8

SATA interface, 2U, H.265 & 4K, Dual Network interface, RAID 0,1,5,6,10,16 X 1080P,

8X 4MP, 4X 4K, 320 MBPS.with 4x6TB i.e. 24TB HDD inside Nos. 1 Rs. 31,273 Rs. 31,273

7.6 Supply, installation, testing and commissioning of Video Management software

enabling security related personnel to easily and remotely gather video evidence,

monitor live situations, and configure and maintain a video surveillance system over

Ethernet consisting of digital video recorders (DVRs), hybrid digital video recorders,

network video recorders (NVRs), analogue video cameras, and IP video cameras

should support Detachable Viewers –users have the ability to detach Viewer panels

and move them to other (or the same) monitor(s). A maximum of two (2) Viewers

can be detached for a total of 75-up video tiles [two (2) detached and one (1)

7.7 Supply Installation Testing & Commissioning of 21 inch Full HD LED monitor including

wall mount brackets/ clamps/ desk mounting stand. Nos. 2 Rs. 6,072 Rs. 12,144

7.8 Supply and fixing of RJ45 Connector Nos. 48 Rs. 354 Rs. 16,968

7.9 Supplying and fixing in position GI box for data outlet suitable for fixing of RJ 45 face

plate complete as required. Nos. 48 Rs. 87 Rs. 4,200

Digitally signed by AMIT

SINGH 22:32:52 IST

7.10 Supply & Fixing of PCB based Information Outlet (I/O) RJ45, TIA-568C Category-6,

Termination of Catergory-6 UTP Cable, UL listed, Shall conform to Category-6 as per

the EIA/TIA-568C.2, Shall support network line speeds up to 1 Gbps, Shall have RJ-45

type connector with bend limiting and strain relief boot for securing IDC contacts

from external forces and for maintaining the bend radius of the cable, Shall have

minimum durability of 750 mating cycles and 200 termination cycles. Shall be

certified by independent labs like ETL/GHMT for compliance to EIA/TIA-568C.2. The

outlet shall be fixed in existing box & cover plate in wall/furniture/floor complete as

7.11 Supply & Fixing of Single Faceplate, Single Port (RJ45-DATA) square plate having

spring shuttered front access for preventing ingress of dust, dimension as per

commercially available modular office furniture. Nos. 48 Rs. 78 Rs. 3,751

7.13 Supply & Laying in existing conduits/raceway/furniture of 4-pair Unshielded twisted

pair cable with a cross filler (+), meeting Category 6 standards as per TIA-568C.2.

The cable shall be tested till 600 MHz or more from independent laboratories like ETL

for 4 connections. Test Certificate from independent labs like ETL shall be required.

7.14 Supply & Fixing of UTP Jack Panel UL listed, loaded with 24 no's UTP ports for PCB

based IO Jacks (RJ45, TIA-568C Category-6), having integrated bonding bar or

other mechanism for grounding, loaded with individually replaceable 24 nos.

Category-6 I/O Jacks complying with TIA-568.C.2. Shall be 6 port module

construction for better cable dressing at the rear. The jacks shall have RJ-45 type

connector with bend limiting and strain relief boot for securing IDC contacts from

external forces and for maintaining the bend radius of the cable.

7.15 Supplying & Fixing of Category 6, UTP patch cords constructed of 24 AWG

unshielded twisted pair stranded copper cable with an enhanced performance

modular plug at each end. Patch cord cable shall be offered in multiple coloured

UTP cable for design flexibility with a clear strain relief boot on each modular plug.

All patch cords shall be compatible with both T568A and T568B wiring schemes. UTP

Cable, 2 Meter. Nos. 48 Rs. 215 Rs. 10,303

Digitally signed by AMIT

SINGH 22:32:52 IST

7.16 Supplying & Fixing of Category 6, UTP patch cords constructed of 24 AWG

unshielded twisted pair stranded copper cable with an enhanced performance

modular plug at each end. Patch cord cable shall be offered in multiple coloured

UTP cable for design flexibility with a clear strain relief boot on each modular plug.

All patch cords shall be compatible with both T568A and T568B wiring schemes. UTP

Cable, 1 Meter. Nos. 48 Rs. 107 Rs. 5,152

7.17 Supply Installation Testing & Commissioning of Managed Layer -2 Switch with Power Nos

on Ethernet (PoE) enabled, 24 Port Fast Ethernet Web Smart Switch, including 2

Gigabit BASE-T and 2 Gigabit Combo BASE-T/SFP. 2 Rs. 12,170 Rs. 24,340

TOTAL OF IP BASED CCTV SYSTEM CARRIED OVER TO SUMMARY Rs. Rs. 8,59,075 Rs. 2,64,000

– 50 kVA UPS with 15 minute backup

Supply, unloading, shifting, installation, testing & commissioning of micro

processor controlled 50 kVA transformerless UPS , IGBT based rectifier to achieve

input THDI < 5% and input power factor of greater than 0.99 at 100% loading. True

Online Double Conversion (VFI as per IEC 62040-3) UPS using PWM IGBT technology

, 3 Phase input and 3 phase 415 V output UPS system; and comprising of the

following complete as required and as per specification:

Fully rated Rectifier cum charger unit and 100% rated Invertor unit

Integrated in UPS module.

Fully rated Inbuilt static switch at the inverter output and 100% rated Inbuilt

- static switch at the static bypass line integrated in UPS module.

Web-enabled Monitoring and Management through SNMP protocols for

multi-OS environments with below features.

Giving notifications like e-mail, paging notification, broadcast notification,

- battery replacement notification, run event-based scripts.

Event logging, data logging and action logging (with date, time,

description of fault and event).

Fully rated Inbuilt Maintenance Bypass Switch for the continuos operation

of the load during maintanance.

- Local notification through audible alarm.

Digitally signed by AMIT

SINGH 22:32:52 IST

Fully rated Battery Circuit Breaker with under voltage coil & deep discharge

protection to the batteries.

Battery Banks comprising of Valve Regulated Lead Acid Sealed

Maintenance Free batteries of minimum 5years design life to provide 15

minutes backup at 50kVA ,0.9PF and ECV=1.7V with each UPS. The batteries

shall be installed on shelves of rack for quick replacement and servicing.

The temperature sensor shall be provided in the battery section for

temperature compensated charging. The bank of batteries shall comprise

of required numbers of batteries connected in series.

Vendor to provide complete details of make of Batteries, ampere hour

ratings, no. of Batteries, Expected life, Final discharge voltage, Nominal

float voltage, Battery recharge time & configuration of back up time,

Battery sizing Calculations

Supply, unloading, installation, testing & commissioning of open type MS

racks including top fully cover to protect from falling object to house SMF

batteries for 60 kVA UPS system along with suitable interconnecting links,

moulded case circuit breaker having Ithermal, Imagnetic & automatic U/V

trip mechanics for Battery Banks etc. complete as required & as per

specifications.

Supply, laying, testing & commissioning of flexible single core copper cable

for interconnections between UPS to UPS, UPS to batteries, complete as

required for 50 kVA UPS.

TOTAL OF UPS & INVERTER SYSTEM CARRIED OVER TO SUMMARY Rs. Rs. 22,02,756 Rs. -

Digitally signed by AMIT

SINGH 22:32:52 IST

ESTIMATED COST FOR ACCESS CONTROL SYSTEM

11 ACCESS CONTROL SYSTEM

Supply, Installation,Testing and commisioning of Contact less Face Recognition and

RFID based Access terminal, RFID Supported (125kHz EM & 13.56MHz MIFARE, MIFARE

Plus, DESFire/EV1, FeliCa), Mobile Card (NFC/BLE), 30,000 (1:1 User based), 5 Faces/

User Capacity, 5,000,000 Text Logs, 2" TFT Screen, 24 bit Voice DSP with ECO

Cancillation, Eternet, RS 485, Weigand Supported, Complete as Required.

Supply, Installation, Testing & Commissioning of 2 Door/ 2 Reader IP Controller

2 accommodates a card database of 55,000 cards, and a transaction buffer of 45,000 Nos. 10 59,695.90 5,96,959.01

transactions,TCP/IP, USB, Serial Interface unit, Relay Switching Port.

3 Supply, Installation, Testing & Commissioning of Proximity Cards. Nos. 250 314.43 78,607.42

Supply, Installation, Testing & Commissioning of Electromagnetic Lock 600 lbs, single

4 leaf, LED Status Display, includes Door Sensor, i/c making conection, integration, Nos. 10 2,834.15 28,341.55

testing etc. complete as required on site

Supply, Installation, Testing & Commissioning of Power Supply 12V 2 A for Access

Control Reader and Door Lock Unit, Complete in all respect as required at site.

Supply, Installation, Testing & Commissioning of Alagtech U/L Clamp made of

6 aluminium anodised for EM Lock on the surface of frame/structure etc. i/c alignment Nos. 10 1,338.47 13,384.70

etc. for smooth operation of EM lock etc.

Supply, Installation, Testing & Commissioning of 24 Port Gigabit Switch, Auto MDI-MDIX

7 for all port,Link Status Detection, 4.8 Gbps Switching Capacity, Rack Mountable, Nos. 1 36,433.82 36,433.82

Complete in all Respect as required at site.

Digitally signed by AMIT

SINGH 22:32:52 IST

Supply, Installation, Testing & Commissioning of Access Control Software for with

Advance Access Management Module & Advance Attandence Mangement

Module. It should support Multi company, Multi location, Multi department, Multi login

with different rights, Muti hierarchy of employee.

Total of Access Control System carried over to summary 17,33,469.32

Digitally signed by AMIT

SINGH 22:32:52 IST

ESTIMATED COST FOR FA & PA SYSTEM

A. SITC OF FIRE ALARM SYSTEM & ACCESSORIES : MR. DSR.

DSR Total Total

Sr. No Description Unit Qty Unit Rate

2018.No. amount amount

Supplying, installation, testing and commissioning of micro

processor based intelligent addressable main fire alarm

panel, central processing unit with the following loop

modules and capable of supporting not less than 240 devices

(including detectors) and minimum 120 detectors per loop

and loop length up to 2 km, network communication card,

minimum 320 character graphics/ LCD display with touch

screen or other keypad and minimum 4000 events history log

in the non volatile memory (EPROM), power supply unit (230

1 17.2.1 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed

maintenance free batteries with automatic charger. The

panel shall have facility to connect printer to printout log and

facility to have seamless integration with analog/digital voice

evacuation system (which is part of the schedule of work

under SH: PA System) and shall be complete with all

accessories . The panel shall be compatible for IBMS system

with open protocol BACnet/ Modbus over IP complete as per

specifications.

Supplying, installation, testing & commissioning of intelligent analog Pcs 185 2846.00

2 17.2.4 addressable photothermal detector complete with mounting base 526510.00

complete as required.

Supplying, installation, testing & commissioning of intelligent addressable Pcs 1 2713.00

3 17.2.9 thermal detector with rate of rise cum fixed tempreature thermistor 2713.00

complete with base as required.

Supplying, installation, testing & commissioning of addressable manual call Pcs 8 3859.00

point complete as required.

Supplying, installation, testing & commissioning of addressable horn cum Pcs 8 3494.00

strobe complete as required.

Supplying, installation, testing & commissioning of fault isolator complete Pcs 8 3257.00

with base as required.

Digitally signed by AMIT

SINGH 22:32:52 IST

Supplying, installation, testing & commissioning of response indicator on Pcs 55 263.00

7 17.2.5 surface/recessed MS Box having two LED, metallic cover complete with all 14465.00

connections etc as required.

B CABLES & ACCESSORIES FOR FAS :

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, RM 1850 141.00

600/1000V rated with annealed copper conductor having

XLPE insulation, steel wire armouring & FRLS outer sheath

complete as required.

C SITC OF PUBLIC ADDRESSABLE SYSTEM & ACCESSORIES :

Supplying, installation, testing & commissioning of 6 zone, Pcs 1 126399.00

voice alarm controller with USB, MP3 player (including 6 zone

1 17.3.1 button paging station) with seamless integration facility with 126399.00

main fire alarm panel for voice evacuation complete as

Supplying, installation, testing & commissioning of digital Pcs 4 96767.00

2 17.3.6 audio amplifier 50 Watt, 25V rms operating at 240 volt AC 387068.00

supply complete as required.

Supplying, installation, testing & commissioning of Pcs 120 2416.00

3 17.3.4 ceiling/wall mounted loud speaker, 3/1.5 Watt in ABS 289920.00

enclosure complete as required.

D CABLE & ACCESSORIES FOR PA SYSTEM

Supplying and drawing of cable Fire Retardant PVC insulated

copper conductor cable in the existing surface / recessed

steel conduit of following pairs, cores and size including

connections and interconnections etc. as required..

17.5.3.1 speaker cable Single pair, 2-core, 1.5 sqmm RM 1800 51.00 91800.00

Supplying and fixing 25 mm dia MS flexible pipe with PVC RM 1500 50.00

2 17.5.4 coating along with all ancillaries and accessories like coupler 75000.00

etc. as required.

GRAND TOTAL Rs. 20,98,512.00

GRAND TOTAL Rs. 20,98,512.00

Digitally signed by AMIT

SINGH 22:32:52 IST

Summary of HVAC Works

S.No. Description of Works Amount (DSR, in Rs.)

Digitally signed by AMIT

SINGH 22:32:52 IST

HVAC (Ducting) for the Proposed Office Space of PFRDA at WTC, New Delhi

DSR -2022 NON- DSR

Sno. Description Units Qty Rate Amount Rate Amount

A Chilled water

4 MR Replace AHU canvas connections Nos 2.00 3,599.58 7,199.16

5 Supply, Installation, Testing Balancing &

Commissioning of G.S.S square/ rectangular

ducting complete with gaskets, elbows, splitters,

vanes, supports adjustable dampers, etc. as per

drawings and as required for dehumidified air

distribution of following thickness as per approved

working drawings and requirement .

6 Supply and fixing of external thermal insulation on

supply air ducts with 19mm thick chemically cross

linked closed cell polythene (XLPE) fire retardant

grade insulation of density not less than 30kg per

cum in single layer with factory lamination of 30

micron aluminium foil or 19mm thick insulation as

per CPWD specifications

7 Suply, installation, testing and commissioning of GI

volume control duct damper complete with

neoprene rubber gaskets,nut,bolts,screws

16.13 linkages,flanges etc. as per specifications

8 Supplying, fixing, testing & commissioning of

powder coated extruded aluminium section supply

air grills with aluminium volume control dampers, as

16.15 per specifications.

Digitally signed by AMIT

SINGH 22:32:52 IST

9 Supplying, & fixing, of powder coated extruded

aluminium section return air grills with louvers but

without volume control dampers, complete as per

16.16 required.

10 Supplying, fixing, testing commissioning of supply air

diffusers of powder coated aluminium with

aluminium volume control dampers. ( 23Nos of

11 Supplying, fixing, testing, commissioning of return air

diffusers of powder coated aluminium. Sqm 110.00 8,121.00 8,93,310.00

13 Supplying, fixing Acoustic lining of supply air ducting

complete with G.I frame, tissue paper, 28G

perforated al. Sheet, 25mm thick 32kg/cu.m Sqm 40.00 708.00 28,320.00

fibreglass insulation as per CPWD specifications.

14 Supplying, fixing , testing and commissioning of fire

dampers in supply air duct/ main branch and return

air path as & where required of required sizes

including control wiring. The damper shall be

motorised and spring return so as to close the

damper in the event of power failure automatically

and open the same in case of power being

restored .the spring return action shall be built

mechanism and not externally mounted . The

damper shall also be closed in the event of a fire

signals complete as required as per specifications .

b 16.20.2 Motorised Actuator No. 20.00 9,948.00 1,98,960.00

15 Supplying, fixing, testing commissioning of Inline

Fan of GI Casing Circular / Rectangular Type with

light weight dynamic balanced GI Impeller, suitable

forSingle Phase Motor (Without Speed Regulator,

Bird Screen and Louver) for toilet/ dinning / pantry

Digitally signed by AMIT

SINGH 22:32:52 IST

Digitally signed by AMIT

SINGH 22:32:52 IST

HVAC Works For Office for PFRDA, WTC, New Delhi

1.0 VRF/VRV OUTDOOR UNIT

Unit Quantity Rate DSR Amount NDSR Amount

Supply Installation, Testing & Commissioning of modular

type Variable Refrigerant Flow/ Variable Refrigerant

Volume air cooled Outdoor units suitable for cooling and

heating, having all hermetically sealed inverter type Scroll

Compressor(s), minimum two compressors for above 14 HP

modules, microprocessor based Controller, top discharge

type condensing unit(s), with R410A Refrigerant, vibration

isolators, with suitable foundation etc. complete as

1.1 required.The unit shall deliver the rated capacity at AHRI Per HP 16.00 16,415.00 2,62,640.00

Conditions and work even at 50°C ambient temperature

without tripping.The unit shall be suitable to work on

400V+/-10%, 3 Phase, 50Hz AC power supply.The unit shall

be filled with first charge of the refrigerant and ready for

use as required.The COP at AHRI conditions shall not be

less than 3.1 and IEER not less than 6.5 .

2.0 INDOOR UNIT

Supply, installation, testing and commissioning of following

minimum capacity 4-wayflow VRV/ VRF Cassette Type

Indoor ceiling mounted unit equipped with synthetic

washable media pre-filter, fan section with low noise fan/

dynamically balanced blower, multi speed motor, coil

section with DX Copper coil, electronic expansion valve,

outer cabinet, drain pump, grill, necessary supports,

2 vibration isolation, cordless remote control etc., suitable

for operation on single phase 230V±10%, 50 HzAC supply,

complete, as required. The unit shall have automatic force

shut down provision in case of fire on receiving signal from

BMS System. The cooling capacity of indoor unit will be at

air inl et conditions of 27 Degree CD Band 19 Degree CWB

4-Way Cassette type

Digitally signed by AMIT

SINGH 22:32:52 IST

3.0 REFRIGERANT PIPING

Supply,Installation,testingandcommissioningincludingvacc

umiazationandNitrogentestingoffollowingnominalsizesofsoft

/harddrawncopperrefrigerantpipingforVRV/VRFsystem,com

pletewithfittings,withsuitableadjustableringtypehangersupp

orts,jointing/brazingincludingaccessories,insulatedwithXPLE

Class-Otubularinsulation/withClass-

Oclosedcellelastometricnitrilerubbertubularsleevessections

ofspecifiedthicknessasgivenbelowforSuctionandLiquidlines,

allaccessoriesasperspecifications etc. as required :

34.9 mm O.D (wall Thickness-1.2 mm) (Insulation: 19 mm) Rmt 34.00 1,230.00

28.6 mm O.D (wall Thickness-1.0 mm) (insulation : 19 mm) Rmt 25.00 1,108.00

22.2 mm O.D (wall Thickness-1.0 mm) (insulation : 19 mm) Rmt 17.00 865.00

19.1 mm O.D (wall Thickness-1.0 mm) (insulation : 19 mm) Rmt 21.00 707.00

15.9 mm O.D (wall Thickness-1.0 mm) (insulation : 13 mm) Rmt 18.00 588.00

Supplying and installing of following size of perforated hot

dip galvanized G.I cable tray with perforations not more

than 17.5%, in convenient sections, joined with connectors,

suspended from ceiling with G.I suspenders including bolts

4 MR and nuts, etc. for carrying refrigerant pipe in outdoor

application as required.

4.1 450 mm width x 62.5 mm depth x 2 mm thickness Rmt 15.00 1,112.63 16,689.48

4.2 225mm width x 50 mm depth x 1.6 mm thickness Rmt 25.00 716.41 17,910.19

5 CONDENSATE DRAIN UPVC PIPE