Construction of office building of Horticulture Department at Dharampur Distt. Solan (HP).

Amount

Providing form work with steel plates 3.15mm. (Three point fifteen milimetre) thick welded with angle iron in frame 30X30mmx5mm.(Thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden/ steel battens and ballies, height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in situ-reinforced concrete and plain concrete work, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.:- (A) Columns, pillars, posts and struts. Square, rectangular or polygonal in plan, in Super-structure for all floor level in all heights.

(B) Beams, cantilevers, girders and lintels sides and soffits of beams, beam hunchings, cantilevers, bressumers and lintels up to any depth in Super-structure for all floor level in all heights.

© Flat surfaces such as soffits of suspended floors, roofs, landings and the like. Floors etc.upto any thickness in Super-structure for all floor level in all heights.

Providing and laying reinforced cement concrete 1:1.5:3 (One cement : one point five sand : three crushed stone aggregate 20mm. (Twenty millimeter) nominal size) mechanically mix by concrete mixer and compacting the concrete with vibrator and curing complete excluding cost of form work and reinforcement for R.C.C. work, including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.(A) Column, pillars, posts and struts in Super-structure for all floors in all heights.

(B) Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers in Super-structure for all floors in all heights.

Providing Tor steel reinforcement including cost of binding wire for R.C.C. work including cutting, bending, binding and placing in position including cost of binding wire complete in Super-structure for all floor level in all heights, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and laying cement concrete 1:3:6 (One cement : Three sand : Six crushed stone aggregate 20mm nominal size) mechanically mix by concrete mixer including curing complete excluding cost of form work in foundation and plinth, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Brick work using common burnt clay building bricks in super structure for all floors in all heights using second class bricks in cement mortar 1:6 (One cement isto six sand) and curing complete including carriage of material through all modes of transporation within all leads and lifts and as per PWD specification and entire satisfaction and direction of Engineer-in-charge.

Half Brick masonry in common burnt clay building bricks in Cement Mortar 1:4 (One cement: four sand) in Ist class bricks in Super-structure for all floors in all heights including curing complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing woodwork in frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in position with Hard/ Sal wood in all floors level, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing 40 x 3 mm(forty into three millimetre) flat iron hold fast 40 cm(forty cetimetre) long including fixing to frame with 10 mm (Ten millimetre) dia bolts, nuts and wooden plugs and embeding in cement concrete block 30 x 10 x15 cm (Thirty into ten into fifteen) centimetre) in 1:3:6 (one cement :three sand :six graded stone aggregate 20 mm(Twenty millimetre) nominal size ). including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

Providing and fixing pannelled glazed and pannelled and glazed door shutter( in Second class Deodar wood having Top rail 10x4 cm (Ten into four centimetre) middle rail 15x4 cm (Fifteen into four centimetre) and bottom rail 20x4 (Twenty into four centimetre) cm sash bar 4x4 cm (Four into four centimetre) below middle rail and above middle rail 5 mm (Five millimeter) thick glass)i/c black enammelled iron butt hinges with necessary screws etc comp. 40 mm (Forty Five millimetre) thick as per Arch. drg. including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85G with wire of dia 0.56mm (Zero point fifty six millimeter) for doors, windows and clerestory windows including second class deodar wood ornamental beading 20 mm × 12.5 mm (Twenty millimeter into twelve point five millimeter) section including bright finished black enamelled iron butt hinges with necessary screws 30 mm (Thirty millimetre) thick Second class deodar wood as per Arch. drg. including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge. 30mm thick

Providing and fixing M.S. grills of required patterns in woodan frames of windows etc. With M.S. flats, square or round bars with round headed bolts and nuts or by screws. Plain grill as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. .

Providing & fixing brass sliding door bolt anodized transparent or dyed to required colour and shade with bolts and nuts screws etc. complete, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. (a) 300mm x 16mm.

Providing and fixing brass tower bolts (barrel type ) anodized transparent or dyed to required shade & colour., including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. (a)200 x 10mm

Prooviding and fixing brass finshed brass handles with nuts and secrews etc complete., including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. (a) 125mm.

Providing and fixing oxidized brass hooks and eyes 250mm ( Two hundred fifty millimeter)hundred , including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

P/F 100mm bright finished brass floor door stopper with rubber cushion screws etc to suit shutter thickness complete , including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

Providing and fixing oxidized M.S. double acting spring hinges with necessary screws. 150mm

6mm (Six millimeter) Cement Plaster to ceiling. In cement mortar 1:3 (One cement : three sand) including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

15 mm cement plaster in single coat on the rough side of brick/concrete walls for internal plastering upto all floor level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar 1:6 (1 cement : 6 sand) including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

15 mm (Fifteen millimeter) cement plaster in single coat on fair side of brick/concrete walls for internal plastering upto all floor level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80 mm (Eighty millimeter) in girth and finished even and smooth. Cement mortar 1:6 (One cement : six sand) including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

P/F 10mm thick anti skid water proof stain & impact resistant heavy duty vetrified tiles 600 x600 x10 mm manufactured of approved shade & colour in flooring, treads of steps & landings laid over 12mm thick cement mortar 1:3 (1cement : 3sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. .

Providing and fixing white/coloured glazed tiles 6 mm ( six millimetre) thick in skirting risers of steps and dado of approved make and size 30x45 cm (size thirty centimetre into forty five centimeter) over base of 12mm thick cement mortar 1:3 (one cement : three sand) and jointing with neat cement slurry complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand pepered smooth to give final matter finish to the surface complete, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand paper and knotting complete as per HP. PWD. Specifications of 1990 Volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Painting two coats (excluding priming coat) on new wood and wood based surfaces,with ready mixed paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter sand papering and stopping as per HP. PWD. Specifications of 1990 Volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. with ready mixed paint other than White paint.

Painting two coats (excluding priming coat on new steel and other metal surfaces, under coat with eith enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foregin matters including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. with ready mixed paint other than white.

Distempering (Two coats) with Ist quality oil bound washable distemper of Asian paints or equivlant of approved shade and manufacture on ceiling/slopping surfaces and undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

Wall painting two coats with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plaster wall surfaces to give an even shade incluiding thoroughly brushing the surface free from mortar dropping and other foriegn matter and sand papered smooth incluiding applying of putty a required for metling the surface, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

Steel work welded in built, up saction in trusses and framed work including cutting hosting fixed in position & applying a priming coat of red lead paint in :- a)In trusses and trussed purlins. For Roof including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

b) In grating framed guard, bars ladders, railing, brackets and similar works.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia mter with prepainted limpet and rubber washers complete with all accessories as required including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing ridges or hips 60cm over all with 0.60mm thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating back coat of polyster of 5 microns over 5 microns primer coat ing including fixing with prepainted iron j or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing plain prepainted GI sheet in ceiling with all required accessories of approved quality and shade complete in all respect (Base members of steel work shall be measured & paid separately) including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing 15cm wide 45cm over all semicircular plain GI sheet gutter with iron brackets 40x3mm size bolts and nuts and washers making necessary connection with rain water pipe as per design including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. (a) 0.63mm thick sheet

Providing and fixing to wall ceiling and floor G.I. pipe (Medium Grade) 15mm dia. With fittings and clamps i/c making good the wall, ceiling and floor

Providing & fixing vitreous china wash basin with single hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fittings flat back 630 x450mm of reputed make.

Providing and fixing PVC P or S trap for water closet complete and as per direction of Engineer-in-Charge

Providing and fixing PVC low level flushing cistern with a pair of mild steel brackets complete in all fittings 10/12.50 ltrs. Capacity and as per direction of Engineer-in-Charge

Providing and fixing C.P brass Zet for oridinary closet.

Providing and fixing vitreous china wash, down water closet (European type, W.C. pan) with integral `P' or S trap inlcuding jointing the trap with soil pipe in cement mortar 1:1 (1cement:1sand) (Seat and cover to be measured and paid for separately). i/c plastic seat cover, cistern and Jet complete.(Modern composite seat).

Providing and fixing 1000 ltr capacity PVC water storage tank tripal core reputed make made complete in all respect and as per direction of Engineer-in-Charge

Providing and fixing G.I. or M.I. unions. 15mm dia and as per direction of Engineer-in-Charge

Providing and fixing brass full way valve with wheel 15mm nominal size and as per direction of Engineer-in-Charge

Providing and fixing steel sink 600 x 450mm heavy duty including all fitting complete and as per direction of Engineer-in-Charge

Providing & fixing C.P. brass waste for wash basin or sink. 32mm dia and as per direction of Engineer-in-Charge

Providing & fiixng PVC waste pipe for wash basin or sink 32mm dia and as per direction of Engineer-in-Charge

Providing & fixing CP brass bib tap with capastan head 15mm dia and as per direction of Engineer-in-Charge

Providing & fixing C.P. pillar tap with capaston head. 15mm dia. and as per direction of Engineer-in-Charge

Providing & fixing CP stop cocks 15mm dia. and as per direction of Engineer-in-Charge

P/F brass soap dish with C.P. brass brckets fixed to wooden cleats with C.P. brass screws and as per direction of Engineer-in-Charge .

Providing & fixing 600 x 450mm bevelled edge mirror of superior glass mounted on 6mm thick AC sheets or plywood sheet and fixed to wooden plugs with CP brass screws and washers of standard quality and as per direction of Engineer-in-Charge .

Providing and fixing towel rail complete with C.P. brass bracket fixed to wooden plugs with C.P. brass 600mm x 20mm and as per direction of Engineer-in-Charge .

Providing and fixing high pressure PVC spigot and socket, waste and ventillating pipes ISI marked i/c fixing with approved adhesive etc. complete pipe (finolex type-B) and as per direction of Engineer-in-Charge . (a)110mm dia

(b)75mm dia

Providing and fixing PVC singal equal branch required degree in compete and as per direction of Engineer-in-Charge 110dia

Providing and fixing PVC coller and as per direction of Engineer-in-Charge . 110mm

Providing and fixing PVC double equal branch required degree in compete and as per direction of Engineer-in-Charge .110dia

Providing and fixing PVC rainwater pipe i/c fixing with approved adhesive in compete and as per direction of Engineer-in-Charge .110mm

P/F PVC plain bend ISI marked complete i/c fixing with approved adhesive etc. Complete and as per direction of Engineer-in-Charge . (a) 110mm dia.

Providing and fixing PVC cowl.110mm and as per direction of Engineer-in-Charge

Providing and fixing PVC connection 15mm dia and as per direction of Engineer-in-Charge

C/O chamber 600x600x750mm inside for fire hydrant with CI surface box 350x5500mm top and 165mm deep inside with changed lid and RCC top slab 1:2:4 20mm nominal size) 100mm thick foundation conc. 1:5:10 40mm nominal size and inside plastring with cement mortar 1:3 finishing with floating coat of neat cement i/c curing complete with 200mm thick wall of brick masonery in CM 1:5

Providing & fixing pvc floor trap of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm complete i/c cost of cutting & making good the walls and floors. 100mm nominal dia.

Providing & fixing 100mm sand cast iron grating for gully, floor or Nahni trap and as per direction of Engineer-in-Charge

Prem Chauhan

SANDEEP SINGH

Pawan Kumar