REPAIRS TO JOINERY ALUMINIUM WOODEN AND STEEL DOORS WINDOWS WIRE MESH CURTAIN RODS CUP BOARDS IN SOUTH CAMP AT AFS SAMBRA

Amount

Taking down, easing and adjusting and also refixing builders hardware as required and refixing of shutters of any description (wooden, aluminium, mild steel) in same opening of any description not exc 1 Sqm, including renewal of unserviceable screws etc complete all as specified & directed

Taking down, easing and adjusting and also refixing builders hardware as required and refixing of shutters of any description (wooden, aluminium, mild steel) in same opening of any description exc 1 sqm but not exc 2 Sqm, including renewal of unserviceable screws etc complete all as specified & directed

Taking down and removing shutters of any description not exc 1 Sqm complete all as specified & directed

Taking down and removing shutters of any description exc 1 Sqm but not exc 2 sqm, complete all as specified & directed

Taking down chowkats or frames not exc 1.5 sqm each (without taking of shutters from the frame) including making good disturbed surface and finishing to match with adjoining surfaces complete all as specified & directed

Taking down chowkats or frames exc 1.5 sqm but not exc 4 Sqm each (without taking of shutters from the frame) including making good disturbed surface and finishing to match with adjoining surfaces complete all as specified & directed

M & L for plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints with second classs hard wood etc., complete all as specified & directed

M & L Flush shutters 30 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides fixed to chowkats complete all as specified.

M & L second class hardwood plain, framed, panelled shutters (any number of panels) 30 mm thick, with panels of timber flat on both sides (feather eged), or of veneered particle board medium density, wood particle board witn commercial face veneers; supplied and fitted to chowkats complete all as specified.

M & L Second class hardwood glazed and skeleton shutters, 30 mm thick, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc; sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified & directed

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 50 x 75 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified & directed

S & F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicityindex of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified & directed

S & F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy all as specified & directed

S & F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy all as specified & directed

S & F Aluminium anodised handle, cast type 150 mm size all as specified & directed

S & F Aluminium anodised handle, cast type 100 mm size all as specified & directed

S & F Aluminium anodised barrel tower bolt 100 mm long all as specified & directed

S & F Aluminium anodised barrel tower bolt 150 mm long all as specified & directed

S & F Butt hinges, medium weight cold rolled mild steel 100 mm size fixed to door frame complete all as specified & directed

S&F butt hinges medium weight cold rolled mild steel 75 mm size fixed to door frame complete all as specified & directed

S & F in repairs Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy all as specified & directed

S&F in repairs Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy all as specified & directed

S&F in repairs aluminium anodised handle cast type 150 mm size all as specified & directed

S&F in repairs aluminium anodised handle cast type 100 mm size all as specified & directed.

S&F in repairs aluminium anodised barrel tower bolt 100 mm long all as specified & directed.

S&F in repairs aluminium anodised barrel tower bolt 150 mm long all as specified & directed.

S&F in repairs butt hinges medium weight cold rolled mild steel 100 mm size fixed to door frame complete all as specified & directed.

S&F in repairs butt hinges medium weight cold rolled mild steel 75 mm size fixed to door frame complete all as specified & directed.

S & F in repairs mild steel ordinary rat tail rod pattern springs including roller and roller plate, 300 mm long fixed to wooden or mild steel frame with bolting / welding complete all as specified & directed.

S & F in repairs floor door stopper of aluminium alloy body and tounge, anodised, with hard drawn steel spring 140mm long complete all as specified & directed.

S & F in repairs brass mortice lock, vertical type, size 100mm, 6 levers complete all as specified & directed

S&F in repairs double action floor spring hydraulically regulated made up of aluminium 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified & directed

S & F in repair door closer cast iron body hydraulically regulated designation No 3, universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 kg complete all as specified & directed

M & L Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified & directed

S & F in repairs hasp and staple, safety type, 100mm size stainless steel including bolt to hinge plate and fixed with bolts or welding as per site condition complete all as specified & directed

S & F in repairs stainless steel handles 100mm size fixed with nut & bolts or welding as per site condition complete all as specified & directed

S & F in repairs hinges mild steel medium weight cold rolled 75mm size suitable for cup boards fixed with nut & bolts or welding as per site condition complete all as specified & directed

S & F in repairs casement stays,300mm size with hinged joint and two plates, with studs suitable for steel windows and ventilators complete all as specified and as directed.

S & F in repairs Mild steel pressed handles, oval type, stove enamelled black 100mm size fixed to steel window with nut and bolts complete all as specified and directed.

Supply and fixing of PVC sheet ply 18mm thick of one side Prelam / Rigidlam and other side plain white color to make cabinet shutter/ drawer front shutter including PVC solid frame complete as per specification all as specified and directed.

Supply and fixing PVC ply 18mm thick of plain color fixed with cleats & screws, solvent cement/adhesive to make book shelf, cabinet sides top and bottom and shelves inside the cabinets complete as per specification all as specified and directed.

Supply & Fixing Auto closing hinges openable at 0 degree for kitchen cabinet shutters complete as specified all as specified and directed.

S & F Handle brass cast type 100 mm size polished bright complete all as specified and directed.

S&F Anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified and directed.

S&F Powder coated, anodised aluminium door shutters, aluminium sections weighing 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber packing, handles 2 nos, in each door hinges, aluminium anodised snap beading screws etc and necessary packing materials etc complete all as specified and directed.

S&F Powder coated, anodised aluminium window or ventilators shutters sliding type, without sash bars, aluminium sections weighing 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium powder coated snap beading, aluminium anodised fittings roller wheels, spring catcher, for sliding type shutters and necessary packing materials etc complete all as specified and directed.

S&F Anodised aluminium powder coated windows and ventilators shutters, side/top hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium powder coated snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 nos), suitable handle (1 No) complete all as specified and directed.

S&F Anodised aluminium grills of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass / stainless steel screws @200 centre to centre, including cutting the grills to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as specified and directed.

S & F in repairs steel window / ventilators with side / top hung shutters including projecting type hinges with steel handle, steel peg stay, complete with glazing bars dovetailed or welded complete all as specified and directed.

Fixing only in repairs steel window / ventilators shutters including necessary repair work and welding if required, making smooth functioning complete all as specified and directed.

Supply and fixing in repairs stainless steel curtain rod 25 mm dia, 1.25mm wall thickness all as specified and directed.

Supply and fixing stainless steel brackets suitable for 25mm dia curtain rod and decorative stainless steel stops/ rollers fixed to ends of SS pipe all as specified and as directed. Note: Quoted rate is deemed to be included each pair inclusive of two numbers of stainless steel brackets and two numbers of decorative stainless steel stops/roller/end cap

S & F steel rolling shutter of 1.25mm thick laths, push pull or manual type, without ball bearing as specified including top cover, ancoring rod, hasp ans staple and one shop coat of primer erected in position as indicated including taking down existing shutter complete all as specified and as directed.

S&F steel rolling shutter of 1.25mm thick laths, gear operated type with bevel gear box and crank handle, without ball bearing as specified including top cover, ancoring rod, hasp ans staple and one shop coat of primer erected in position as indicated including taking down existing shutter complete all as specified and as directed.

S & F Safety lever lock mild steel with 4 levers for rolling shutter in repair work complete all as specified and as directed.

S & F ball bearing for rolling shutter in repair work complete all as specified

Taking down and reixing of rolling shutter any type and thickness including necessary repair work, welding , greasing, oiling and changing any damaged parts complete and making smooth functional all as specified and as directed.

Supply and fix sheet plain glass 4 mm thick, ordinary quality, in squares not exceeding 0.5 Square Metre for each pane, glazing with oil putty or beading including hacking out old broken glass (any thickness, size, quality and description) complete all as specified and as directed.

Supply and fix sheet plain glass 5.5 mm thick, ordinary quality, in squares not exceeding 0.5 Square Metre for each pane, glazing with oil putty or beading including hacking out old broken glass (any thickness, size, quality and description) complete all as specified and as directed.

S & F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or steel screws all as specified and as directed.

S & F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or steel screws all as specified and as directed.

Supply and fix in repairs figured glass, pin head type 4 mm thick, not exceeding 0.5 Square Metre for each pane, glazing with oil putty or beading including hacking out old broken glass (any thickness, size, quality and description) complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.,) or insulation boards/slabs/blankets, any thickness including cover fillets and frame work complete all as specified and as directed.

M & L powder coated aluminium snap grid frame work (size of grid 605 x 605mm) supported by hangers 2-4 mm dia GI (up to 1200mm length /as per site requirement) adjusting level fixed to roof slab/walls/wooden/steel members by means of ceiling cleats made out of GI flat 40x3mm size 60 cm long and expansion hold fasteners 12.5mm dia 40mm long including Gypsum board 12mm thick in ceiling as per manufacturer instruction including two coats of distemper oil emulsion over a coat of self primer complete all as specified and as directed.

Taking down cement plaster on brick/concrete/stone masonry walls etc incl racking out joints, hacking for key, scrubbing down with water etc complete including removing rubbish off the premises all as specified & directed.

M & L rendering on stone masonary surfaces or surface other than fair face of brick work wall 15 mm thick in cement mortar 1:4 finished even & fair all as specified & directed

M&L rendering on stone masonary surfaces or surface other than fair face of brick work wall 10 mm thick in cement mortar 1:6 to be finished even & smooth without using extra cement all as specified & directed

M&L Preparation of newly plastered wall surfaces and applying two coats of Distemper oil emulsion over a coat of alkali-resistant primer over & including 3mm thick wall care putty finished smooth all as specified & directed

M&L Preparation of newly plastered wall surfaces and applying three coats of white wash complete all as specified & directed

M&L Preparation of old treated wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed

M&L Preparation of new or previously untreated steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed

M&L Preparation of old painted steel surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified

Supply and fix in repair stainless steel hooks 50mm to 60mm fixed on MS or wooden plates for hanging cloths fixed on walls including necessary painting complete all as specified & directed Note: Each hook on plates will be measured as one unit

Restraining and resecuring of any dia of wire for moisquito net / drying cloths including making good staples, hooks, bolts eyes etc complete all as specified

Supply and fix in repairs curtain rails 25mm dia, 1.25mm wall thickness, anodised aluminium alloy with fixing brackets, stops and rollers complete all as specified

S & F in repair mild steel round bars 6mm to 8mm dia cut to length bend to shape required, including cranking, bending ,hooking ends, including necessary painting fixed in ceiling for support to mosqito wire complete all as specified & directed

Supply and fix in repair adjustable steel hooks for fixing wire including fixing arrangements like fasteners/hooks with wall including necessary painting to match with existing finish of wall complete all as specified

Supply and fix in repair plain mild steel wire 3.15mm dia, galvanised class 3 in detached work such as for mosquito nets and including straining bolts, hooks, eyes fixed to wall, securing with and provision of galvanised iron tying wire of hanging portion with ceiling with galvanised iron staples or steel pins complete all as specified.

DHANSHRI ENTERPRISES

M/S ADITYA CONSTRUCTIONS

RAJENDRA KRISHNA SARAF

PURVIK CONSTRUCTIONS

M/s. N D KALING

M/S MAHADEV M PATIL