Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹26.4 LAccepted-AOC AT POST GHUGUS TAH DIST CHANDRAPUR DIST CHANDRAPUR CHANDRAPUR 442505 | CHANDRAPUR | CHANDRAPUR | MAHARASHTRA | 442505 | 1 | Accepted-AOC Lowest amount quoted | |
| 2 | Rejected-Technical 478 3 834004 | RANCHI | JHARKHAND | 834004 | - | Rejected-Technical Amount quoted is higher than L1 | |
| 3 | Rejected-Technical BENGALI CAMP WARD NO 4 GHUGUS | GHUGUS | CHANDRAPUR | MAHARASHTRA | 442505 | - | Rejected-Technical Amount quoted is higher than L1 | |
| 4 | Rejected-Technical NEAR NEW BUS STOP CHANDANI NAGAR GHUGUS DIST CHANDRAPUR | GHUGUS | CHANDRAPUR | MAHARASHTRA | - | Rejected-Technical Amount quoted is higher than L1 | |
| 5 | Rejected-Technical NEAR RADHAKRISHNA MANDIR SHASTRINAGAR GHUGUS DIST CHANDRAPUR | CHANDRAPUR | CHANDRAPUR | MAHARASHTRA | - | Rejected-Technical Amount quoted is higher than L1 |
Tender Value
₹38.6 L
EMD Value
₹48,200
Closing Date
20 May 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
G. DEVARAJAN
AGM office Wani Area Chandrapur
Shifting of Naigaon security check post shed along with construction of concrete approach road and Hard Stand and open shed from high level wardha bridge to near Shiv Mandir at Naigaon Deep OCM under Neeljay Sub Area of Wani Area.
2023_WCL_278633_5
WCL-wa4350-civ-e004-2023-24/91
Open Tender
Civil Works - Others
Item Rate
120 days
AGM office Wani Area Chandrapur
Please refer Tender documents.
3 documents required · 3 mandatory
₹48,200
4 Aug 2023
8 May 2023
22 May 2023
8 May 2023
20 May 2023
9 May 2023
8 May 2023 - 17 May 2023
Amount
Construction of open shade
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources: 6 graded stone aggregate 40 mm nominal size derived from natural sources).
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, ifnishing and reinforcement- All work up to plinth level : 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).
Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : Water bound macadam road
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Extra for providing and fixing wind ties of 40x 6 mm flat iron section.
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m²
Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
Prefabricated check post Cabin
Providing and fixing MS Fabricated Portable Office Cabin With complete insulation, electrical & Plywood claddings including transportation charges from factory to working site. Size 10' * 10' * 8.5' as detailed below, 1. Bottom Frame: 100 x50 mm formed MS Square Pipes of 3mm thick &. ISI Marked MPL, 2. Stiffener Bottom: 80x40mm & 50x50 mm square pipes. ISI Marked MPL, 3. Top Frame : Frame made of 50x50mm square pipes. ISI Marked MPL, 4. Stiffener Top: 50x50 mm, 25x50 mm & 25x25 mm Square pipes. ISI Marked MPL, 5. Side Wall Stiffeners: Corner post shall be of 50x50mm L Angel, 25x50 mm Square pipes & wall thickness of 60 mm. ISI Marked MPL, 6. Paneling Outside : MS Sheet Specially corrugated 1.2mm thick sheet welded on MS frame. Jindal/Essar/Tata., 7. Internal Wall Paneling : The paneling of side walls and roof shall be of 9 mm thick Pre laminated particle board (MDF) & all vertically and horizontal corners shall be neatly & smoothly finished with Aluminum sections., 8. Roof Outside: 1.2mm thick MS sheet properly sloped & water tight Protect From Antirust with Gutter System. Jindal/ Essar/Tata., 9. Bottom Flooring : On the bottom frame 18 mm thick Bison panel i.e. Cemented bonded fiber sheets VISAKA INDUSTRIES shall be fixed by means of self-taping screw &1.5mm thick PVC vinyl Carpet shall be fixed on the panel. (100% water, termite & dimensional proof with vinyl Carpet), 10. False Ceiling: 9mm thick MDF of make all vertically and horizontal corners will be neatly and smoothly Finished with Aluminum sections & L angles, 11. Aluminum Sliding Windows Size:4'x3'- 2 no’s With Safety Grills: Double shutter sliding aluminum powder coated windows with 4mm thick glass for all windows, safety grills from outside &canopy on the top of windows., 12. Main Door Size:7'x3'--1no’s : The door shall be of external opening type made out of the same material as wall panels& canopy above the door. Frame work by tubular pipe of 25 x 25 & the door interior shall be finished with same material matching with that of the Cabin interior. Door with std hardware locks & handles, 13. Insulation : 25 mm thick Glass wool density of 64 kg/m3 with insulation for top &25side walls, to Avoid Heat., 14. Wiring: All wiring shall be concealed and shall be PVC insulated copper wires of ISI quality, suitable for 240 volt, 50 HZ single phase AC power supply. 2.5 mm thick cable for lighting, 5amp switches with 3pin Sockets, bulk head light above the door, 4mm thick cable for main electrical supply & with MCB protection. Electrical Fittings : All electrical fittings in the portable cabin shall be 220-240V. i) Tube Light –2 No’s. Bajaj/Orient/Syska. ii) Bulk head door light –1 No’s. iii) Cabin Fans – 1 No’s. iv) 3pin Socket with Switchboard – 2 No’s. Maru v) A/C Provision — 1 no’s., 15. Outside Painting: All components are painted with a coat of primer & 2 coats of corrosion free paint i.e. synthetic epoxy paint., 16. Hooks: Specially formed for easy lift & shift.
Total impact of GST for the purpose of CTC
Sunni D Tandra
Krishna Verma
ANIL KUMAR SINGH
KUBER VARMA
S. K. PANDEY
stage.html
html • 0.04 MB
techsummary_288467.pdf
PDF • 1.46 MB
finsummary_288467.pdf
PDF • 1.46 MB
NLOC-682.pdf
PDF • 1.46 MB
finance_288467.pdf
PDF • 0.10 MB
BOQ Comparative Chart
xlsx • 0.01 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .