Hubballi Division-Miscellaneous annual maintenance activities for Golf link colony, Brook Road officer Colony, Behind Hospital Colony, Railway officer club and surrounding colony, willay ground, officer Rest House all other services building and area covered under SSE/W/SW/UBL jurisdication (Special work-8/A)

Item Breakup - B-SCH-B

"Maintenance , repair / replacement in Per each 624.00 respect of 1) Masonry works - brick work, Team/day concreting,grouting, plastering, pointing, flooring / dado work, Open drainage works, roof leakages etc. 2) Carpentry works - Wood work, doors & windows,cup boards, frames, shutters fittings & fastenings,rafters, reapers, wooden furnitures, roof sheeting etc.3) Plumbing works- Day to day maintenance and repair works in Plumbing related. By supplying multi skilled team. Each team of Multi skilled man comprises of 2 members of mason or carpenter or plumber or combination as per requirement with all Contractors tools, transportation, lead & lift,equipment's & scaffolding arrangements, safety equipment, maintenance of tools & other equipments etc. Material required for repair / replacement / other petty repair works will be supplied by the Railway at free of cost at work spot and as decided by Engineer in charge. The rate is for any one team of multi skilled members. Note: 1) Each member of team should report to SSE/Works - In charge on or before 9hrs on required working days as required by Railways 2) The Contractor should attend the maintenance, repair / replacement works with number of labour specified - one team of 2 nos for each category of work as directed by the Engineer in charge 3) A day to day register shall be maintained for this purpose and the same should be produced to the SSE/Works - In charge when ever required and produced the same for making payment 4) If any complaint / deficiency noticed in the working of the labourer, they should replaced with new person as per the direction of the Engineer in charge,. 5 ) Two times maintenance cost (per team / per day) will be imposed as penalty for the deficiency in working by the contractor's labour 6) The contractor should comply with existing laws and acts of Govt. of India and State Govt. Law and acts in engagement and working with labour 7) Mobile phone communication facility should be provided by the contractor to the each team for communication with departmental officials for instructions." Total 1378971.36

Item Breakup - D-SCH-D

of 88 mm, weighing not less than 170 gms Providing and fixing PTMT urinal cock of 17.76 approved quality and colour. 17.76.1 15 mm nominal bore, 80 mm long, 42 mm Each 30 175.4 5262 174 high and 30mm wide with BSP female threads weighing not less than 48 gms 17.80 Providing and fixing white vitreous china Each 2 7979.2 15958.4 battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 175 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. HUBLI DIVISION-ENGG/SOUTH WESTERN RLY 17.81 Providing and fixing floor mounted, white Each 46 18212.9 837793.4 vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual 176 flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 18.7 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. ( Internal work - Exposed on wall ) 177 18.7.2 20 mm nominal dia Pipes Metre 450 335 150750 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of 18.8 pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 178 18.8.3 25 mm nominal dia Pipes Metre 220 627.25 137995 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded 18.9 fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 179 18.9.6 50 mm nominal dia Pipes Metre 200 794.25 158850 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including 18.10 cutting and making good the walls etc. ( Internal work - Exposed on wall ) 180 18.10.6 50 mm dia nominal bore Metre 44.8 1048.35 46966.08 Providing and fixing G.I. pipes complete 18.12 with G.I. fittings including trenching and refilling etc. External work 181 18.12.6 50 mm dia nominal bore Metre 35.2 762.15 26827.68 18.15S BRASS FITTINGS Providing and fixing brass bib cock of 18.15 approved quality : 182 18.15.1 15 mm nominal bore Each 168 353.25 59346 Providing and fixing brass stop cock of 18.16 approved quality : 183 18.16.1 15 mm nominal bore Each 168 353.25 59346 HUBLI DIVISION-ENGG/SOUTH WESTERN RLY Providing and fixing ball valve (brass) of 18.18 approved quality, High or low pressure, with plastic floats complete : 184 18.18.1 15 mm nominal bore Each 168 406.85 68350.8 185 18.18.2 20 mm nominal bore Each 168 462.5 77700 Providing and fixing uplasticised PVC 18.21 connection pipe with brass unions : 18.21.1 30 cm length 186 18.21.1.1 15 mm nominal bore Each 67.2 85 5712 Providing and fixing C.P. brass shower rose 18.22 with 15 or 20 mm inlet 187 18.22.2 150 mm diameter Each 84 222.35 18677.4 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES 18.48 Providing and placing on terrace (at all floor Per Litre 5600 11 61600 levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable 188 locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass angle valve 18.53 for basin mixer and geyser points of approved quality conforming to IS:8931 189 18.53.1 15mm nominal bore Each 112 574.3 64321.6 18.54S PTMT FITTINGS Providing and fixing PTMT, push cock of 18.57 approved quality and colour. 18.57.1 15 mm nominal bore, 98 mm long, Each 33.6 112.8 3790.08 190 weighing not less than 75 gms 19.0 DRAINAGE 19.1S STONE WARE PIPES AND FITTINGS Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff 19.1 mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 191 19.1.2 150 mm diameter Metre 44.8 695.8 31171.84 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed 19.6 with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 192 19.6.4 300 mm dia. R.C.C. pipe Metre 44.8 994.3 44544.64 193 19.6.7 600 mm dia. R.C.C. pipe Metre 11.2 2243.4 25126.08 21.0 ALUMINIUM WORK 21.1S General HUBLI DIVISION-ENGG/SOUTH WESTERN RLY Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required 21.1 EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent Kg 1500 495.05 742575 or dyed to required shade according to IS: 194 1868, Minimum anodic coating of grade AC 15) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings 21.1.2 wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.1 Anodised aluminium (anodised transparent Kg 800 598.6 478880 or dyed to required shade according to IS: 195 1868, Minimum anodic coating of grade AC 15) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene 21.3 gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 With float glass panes of 4.0 mm thickness Sqm 200 1176.8 235360 196 (weight not less than 10kg/sqm) 22.0 WATER PROOFING 22.1S General 22.5 Providing and laying water proofing Sqm 124 617.05 76514.2 treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second 197 layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. HUBLI DIVISION-ENGG/SOUTH WESTERN RLY 22.22A Providing and applying fibre reinforced Sqm 4080 563.1 2297448 elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self- priming of elastomeric water proofing liquid (dilution with water in the ratio of 3:1) and 198 two coats of undiluted elastomeric water proofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. 23.0 RAIN WATER HARVESTING & TUBEWELLS 23.1S General Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 23.3 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 199 23.3.2 150 mm nominal size dia Metre 134.4 793.25 106612.8 26.0 NEW TECHNOLOGIES AND MATERIALS 26.41S NEW TECHNOLOGY ITEMS Providing and laying factory made Precast concrete solid blocks of 200 mm thickness 26.68 of grade M10 made of C&D waste from approved manufacturer in foundation and plinth in: 26.68.1 Cement mortar 1:6 (1 cement : 6 coarse cum 12 7387.25 88647 200 sand) Providing and laying factory made Precast concrete solid blocks of 200 mm thickness 26.69 of grade M10 made of C&D waste from approved manufacturer in superstructure above plinth level up to floor V level 26.69.1 Cement mortar 1:6 (1 cement : 6 coarse cum 67 9844.65 659591.55 201 sand) Total 51563140.39