Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹872.4 Cr
EMD Value
₹8.7 Cr
Closing Date
28 Nov 2025, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GM (Procurement)
K-RIDE (Rail Infrastructure Development Company (Karnataka) Limited) #8, 1st Floor, Samparka Soudha, Dr. Rajkumar Road, Opposite Orion Mall Rajajinagar 1st Block, Bengaluru - 560010
Supply, Erection, Testing and Commissioning of Receiving Substation with incoming Cabling from Grid Substation including 25 kV-AC Traction cum 33kV Auxiliary Main Sub- Stations, 25kV Overhead Equipment, Auxiliary Power Supply and other works for BSRP
2024_KRIDE_216260_1
K-RIDE/BSRP/PST/C2andC4/2024
Open Tender
Construction Works
Works
730 days
Work
Please refer Tender documents.
10 documents required · 10 mandatory
₹50,000
Rail Infrastructure Development Company (Karnataka
₹8.7 Cr
KRIDE Office Bengaluru
31 Oct 2025
26 Nov 2024
29 Nov 2025
15 Apr 2025
28 Nov 2025
19 May 2025
26 Nov 2024 - 17 Dec 2024
11 Dec 2024
Power Block Provision (Fixed Cost)
(+/-) AMC cost for each addition/deletion of following C&M equipments covered under CM2 & CM3 Schedules.
Extra for each switching station SP/SSP/FP/SS integrated with ASS RTU or another station RTU
Description
Schedule-A : OHE for Corridor 2 & 4
Schedule-B : RSS
Total
PROJECT PROVISIONAL SUM(Fixed Cost)
Schedule
Schedule-C :ASS
Schedule-E :Provisionl Sum
BOQ - RSS and 220kV EHV Cabling
BOQ - ASS
Fc1-Eur
FC1-Eur
Total
Total BOQ - SCADA
Training of Employer's staff
Off shore
In India
Maintenance & Operations manuals
Integrated testing & commissioning
Corridor-2
Corridor-4
As Built Drawings
Total
ITEM No.
OHE - SUPPLY -C2&C4
Galvanized Steel Masts
On Viaduct
8''x8'' BFB with base plate (BFB/RSJ with Base plate)
B series masts ( B-200 / B-225) with base plate (Fabricated steel mast)
Galvanized Steel Masts
At - Grade
Cable locking belt and associated accessories
B series masts ( B-200 / B-225) (Fabricated steel mast)
Galvanized Steel Masts
Viaduct, At Grade
Dwarf mast (BFB/RSJ
Two Track cantilever (TTC)
Galvanised Drop Arms supporting OHE at Stations- At Grade ,Portals at At-Grade, Viaduct
Drop Arm 6" x 6" BFB
Drop Arm 8"X6" RSJ
Galvanized Steel Portal structures Viaduct /At Grade
Supporting for 3 Tracks (Portal)
Supporting for 4 Tracks (Portal)
Supporting for 6 Tracks (Portal)
Intermediate boom for 3 tracks (Portal)
SPS and associated fitting (Intermediate boom for 3 tracks)
Intermediate boom for 4 tracks (Portal)
SPS and associated fitting (Intermediate boom for 4 tracks)
Intermediate boom for 6 tracks (Portal)
SPS and associated fitting (Intermediate boom for 6 tracks)
Overhead Wires and Conductors
Catenary Wire - 120 sq mm (Cu-Mg)
Contact Wire -150 sqmm (Copper Silver)
Anticreep Wire - 120 sq mm (Cu-Mg)
Feeder Wire 145 Sqmm (Cross/Slack Feeder)
Droppers
Dropper Assembly
233 sqmm (AAC) Return conductor
Buried Earth Conductor ACSR 93.3 SQ mm
Overhead Protection Conductor ACSR 93 SQ mm
Cantilever Assembly
For Push-off with composite insulators
For Pull-off with composite insulators
Galvanized Steelwork.
For mounting multiple cantilevers on masts/drop arms etc.
For supporting catenary system/overhead conductors under the roofs at stations
For supporting Return Conductor/OPC/feeders from mast/drop arm
Jumper Assemblies
Between Contact wire and Messenger wire (H)
Between two OHE's.(G), 120 sq mm
Between two OHE's.(F),
Anti Theft Jumper ( ATJ)
Earthing Assemblies
Between OPC and earth / ITL & ITL to ITL
Between BEC and Earth Terminal/ ITL
Between RC and Rail/ ITL
Integral Transversal Link
Earthing Station 1 Electrod Type
Between Station Canopy etc. and Earth Connection Point
Earthing of Viaduct Spans, U-girders connecting pier caps & all interconnections
CAD Welding on Rail
Earthing of Hand Rails/Viaduct Lighting Support
Mast Earthing
Termination Assemblies
Termination assembly for OHE, comprising of one contact wire and one messenger wire/large span wire
Termination of OPC
Termination of Return wire
Feeder Wire (Slack/Cross Feeder)
Anti-Creep Assembly
Guy Rod Assembly
Automatic Tensioning Device Assembly
Automatic Tensioning Device assembly of 5-Pulley Block Type including all fittings, Weight and ATD Cage
Automatic Tensioning Device of Spring Type
Insulator Assembly
Cut-In Insulator Assembly
Post Insulator
Section Insulator Assembly
Type I (Suitable for Main line)
Plates and boards Set for the Catenary System
Number plates
Caution Boards on Masts
Caution Notices at stations
Caution Boards at IOL/power block Limiting Boards
Caution Boards at turnouts
Caution Board for Public at Every Station Stair/Lift/Platform
Engine Stop Board
Safety Screen Panels
Neutral Section
Short neutral section assembly(PTFE)
Insulated Sleeves
Line Cover for catenary
Total BOQ - ASS
Catenary Monitroing System
Wind Speed Sensor
Anti bird arrangement
Anti Bird Nesting SS net
Anti Bird Disc
Printer all in one A3 laserjet
Total
ITEM No.
OHE -ERECTION-C2&C4
Galvanized Steel Masts
On Viaduct
8''x8'' BFB with base plate
B series masts ( B-200 / B-225) with base plate
Galvanized Steel Masts
At - Grade
220 KV Cable pulling by motorized winch Machine with Auto Cut only and laying in existing trench / pipes / RCC cable trench
B series masts ( B-200 / B-225) with supporting equipment
Galvanized Steel Masts
Viaduct, At Grade
Dwarf mast (8x8 BFB/RSJ)
Two Track cantilever (TTC)
Galvanised Drop Arms supporting OHE at Stations- At Grade ,Portals at At-Grade, Viaduct
Drop Arm 6" x 6" BFB
Drop Arm 8"X6" RSJ
Galvanized Steel Portal structures for viaduct / At Grade
Supporting for 3 Tracks (SPS & associated fitting)
Supporting for 4 Tracks (SPS & associated fitting)
Supporting for 5/6 Tracks (SPS & associated fitting)
Cantilever Assembly
For Push-off with composite insulators as per Approved drawing
For Pull-off with composite insulators as per Approved drawing
Buried Earth Conductor ACSR 93.3 sq mm ,
Return Conductor 233 ( AAC)
Overhead Protection Conductor ACSR 93.3 sq mm
Anticreep Wire -120 sq mm ( Copper Magnesium)
Feeder Wire -145 sq mm
Galvanized Steelwork.
For mounting multiple cantilevers on masts/drop arms etc.
For supporting catenary system/overhead conductors under the roofs at stations
For supporting Return conductor / feeder / any other conductor
Caution Board on the Mast
Caution Boards at IOL / Power Block Limiting Boards
Caution board at the Stations
Caution board at the Turnouts
Caution Board for Public at Every Station Stair/Lift/Platform
Engine Stop Board
Number plate
Overhead catenary system
Contenary wire - 120 sq mm ( Cu Mg)
Contact wire -150 sq mm ( Cu Ag) incl Temporary slewing, if required
Insulated sleeves cover for catenary
Neutral Section
Short neutral section assembly (PTFE, at Feeding Post)
Dropper Assembly
Jumper Assemblies
Between Contact & Messenger wire (H)
Between two OHEs "G"
Between two OHEs "F"
Earthing Assemblies
Between BEC & Earth Terminal
Between RC & ITL / Rail
Integral Transverse link
Between Station canopy & earth connection
Earthing connection of viaduct span & segment
Bus VT Module Busbar and other items included above in item 6 and as per specifications
Termination Assemblies
Termination assemblies of OHE comprising contact wire & messenger wire
Termination of OPC
Termination of RC
Feeder wire
Anticreep assembly
Guy rod assembly
Automatic Tensioning device assembly
5-Pulley block
Spring Type ATD
Insulator assembly
Cutin insulator
Post Insulator
Section Insulator Assembly (suitable for Mainline)
Earth quake sensor and Thermal Imaging camera
Catenary Monitroing System
Wind Speed Sensor
Anti Bird Nesting net
Anti bird dic
Installation of concrete Foundations & grouting in all types of soils using M-20 grade (incl muffs) including nominal reinforcement wherecer required as per RDSO drawings / approved design from KRIDE for Structures / Portals / TTUs / switching stations etc
Testing and Commissioning of Overhaed catenary system
Adjustment of Cantilever & SED as per approved drawing
Tower Wagon checking
Others (Testing & commissioning of OHE system)
Total
ITEM No.
OHE SUPPLY (SOLADEAVHALLI DEPOT)
Galvanised Steel masts
Instruments and Testing Kits
Instruments and Testing Kits
Instruments and Testing Kits
Instruments and Testing Kits
Instruments and Testing Kits
At Grade and in Depot
Supply and Laying of R.C.C. Cable covering tiles as per KRIDE approved drawing
Dwarf masts
Drop Arm 6" x 6" BFB
Drop Arm 8"X6" RSJ
Galvanised Steel masts for regulated contact wire only
Instruments and Testing Kits
Two-track cantilever masts (8.0m boom)
Galvanized Steel Portal Structures
On Viaduct/Ramp
Instruments and Testing Kits
Instruments and Testing Kits
Instruments and Testing Kits
At Grade
For 3 Tracks
For 4 Tracks
For 5/6 Track
Intermediate boom for 3 tracks
SPS and associated fitting (Intermediate boom for 3 tracks)
Intermidiate boom for 4 tracks
SPS and associated fitting (Intermediate boom for 4 tracks)
Intermidiate boom for 5 tracks
SPS and associated fitting (Intermediate boom for 5 tracks)
Overhead Wires and Conductors
Catenary Wire - 120 sq mm (Cu-Mg)
Anticreep Wire -120 sqmm (Cu-Mg)
Overhead Protection Conductor (OPC) -93.3 sq mm (ACSR)
Bridle wire
5mm Dropper Wire (Electrolytic Hardrawn Type)
Dropper Assembly
Instruments and Testing Kits
Cantilever Assembly
For Push-off with composite insulators - Conventional
For Pull-off with composite insulators - Conventional
For Push-off with ceramic insulator - Tramway
For Pull-off with ceramic insulator - Tramway
Galvanized Steelwork.
For mounting multiple cantilevers on masts/drop arms etc.
For supporting catenary system/overhead conductors under the roofs at stations
Instruments and Testing Kits
Jumper Assemblies
Between Contact wire and Messenger wire
Between two OHE's.(G)
Between two OHE's.(F)
Earthing assemblies
Between OPC and Earth terminal
Between BEC and Earth Terminal
Integral Transversal Link
Earthing stations of 1-electrode type
Instruments and Testing Kits
CAD Welding on Rail
Mast Earthing
Termination Assemblies
Single Contact Wire (107 sq.mm)
Single Contact Wire (150 sq.mm)
Termination assembly for OHE, comprising of one contact wire and one messenger wire
Termination for OPC
Anti-creep Assembly
Guy Rod Assembly
Automatic Tensioning Device Assembly
Automatic Tensioning Device assembly of 5-Pulley Block Type including all fittings, Weight
Insulator Assembly
Cut-In Insulator Assembly
Post Insulator
Section Insulator assembly
Type-I (Suitable for Main Line)
Type-II (Suitable for Depot)
Plates and boards for the Catenary system
Number plates
Caution Boards on Masts & turnouts
Caution Boards at unwired turnouts
Other Caution Boards including 'Engine stop'
Safety Screen Panels
Anti Bird Nesting SS net
Erection of item no. 63 and item no. 64 (included in supply)
Supply, Inspection, Delivery of Retractable incl tools , Interlocking & spares
Total
ITEM No.
OHE Erection (SOLADEAVHALLI DEPOT )
Galvanised Steel masts
On Viaduct/Ramp
Instruments and Testing Kits
Instruments and Testing Kits
Instruments and Testing Kits
Instruments and Testing Kits
At Grade and in Depot
Supply and spreading of Fine sand
Dwarf masts
Drop Arm 6" x 6" BFB ( For Single Cantilever)
Printer all in one A4 laserjet
Galvanised Steel masts for regulated contact wire only
Instruments and Testing Kits
Two-track cantilever masts (8.0m boom)
Galvanized Steel Portal Structures
On Viaduct/Ramp
Instruments and Testing Kits
Instruments and Testing Kits
At Grade
For 3 Tracks
For 4 Tracks
For 5 track
Intermediate boom for 3 tracks
SPS and associated fitting (Intermediate boom for 3 tracks)
Intermidiate boom for 4 tracks
SPS and associated fitting (Intermediate boom for 4 tracks)
Intermidiate boom for 5 tracks
SPS and associated fitting (Intermediate boom for 5 tracks)
Overhead catenary system
Catenary Wire -120 sq mm ( Cu Mg)
Contact wire -150 sq mm ( Cu-Ag0.1)
Contact Wire -107 sq mm ( Copper ETP)
Anticreep Wire -120 sq mm ( Cu Mg)
Overhead Protection Conductor (OPC) -93.3 sq mm (ACSR)
Bridle wire
5mm Dropper Wire (Electrolytic Hardrawn Type)
Dropper Assembly
Galvanized Steelwork.
For mounting multiple cantilevers on masts/drop arms etc.
For supporting return conductors/feeders/OPC from mast/drop arm
Buried Earth conductor and Structure Earth Conductor (BEC & SEC)
Cantilever Assembly
For Push-off with composite insulators - Conventional
For Pull-off with composite insulators - Conventional
For Push-off with ceramic insulator - Tramway
For Pull-off with ceramic insulator - Tramway
Jumper Assemblies
Between Contact wire and Messenger wire
Between two OHE's.(G)
Between two OHE's.(F)
Earthing Assemblies
OPC and Earth Terminal
Earthing Terminal 1 Electrod Type
Cad Welding on Rails
Between BEC and Earth Terminal
Integral Transversal Link
Termination Assemblies
Single Contact Wire (150 & 107 sq.mm)
Termination assembly for OHE, comprising of one contact wire and one messenger wire
Termination for OPC
Guy Rod Assembly
Anti-creep Assembly
Automatic Tensioning Device Assembly
Automatic Tensioning Device assembly of 5- Pulley block type
Instruments and Testing Kits
Insulator Assembly
Cut-In Insulator Assembly
Post Insulator
Section Insulator assembly
Number plates
Number Plates
Caution board on Masts
Caution Boards at unwired turnouts
Other Caution Boards including 'Engine stop'
Safety Screen Panels
Anti Bird Nesting SS net
Anti bird Disc
Foundation for Depot OHE Location
Foundation ( M15) Grade
Erection of item no. 67 (Included in Supply)
Testing and Commissioning
Total
ITEM No.
Feeding Post
Instruments and Testing Kits
Interrupters
Single Pole Motor Operated Isolators ( with earthing Heel)
Measuring and protection Equipment
25 KV, 3.3. KV Cables
25 kV Feeder Cable
Return feeder Cable
C& M Cables
C & M Cables ( FP, SP, SS, & SSP)
Marshalling box
Jumper Assembly between OHE & Isolator,LBS, Interrupter,CB, feeder & isolator, OHE & LT/BT or similar along with all voltage cable cleats
Sheath Voltage Limiters with Link BOX
Switching Stations (SP, SS & SSP)
Interrupters
Double Pole Motorised Isolators
Measuring and protection Equipment
25 KV Potential Transformer
25KV capacitive voltage sensor
42 KV Lightning Arrester with counter and other accessories
ERECTION
Erection (Feeding Post +/ Switching Stations)
Erection of 25kV,3.3kV cables and C & M cables / wiring
Testing and Commissioning (Feeding Post +/ Switching Station)
Total
ITEM No.
DEPOT ( FP & SSP)
25 KV Switching Equipments
Circuit Breakers
Interrupters
Single Pole Motor Operated Isolators
Single Pole Manually Operated Isolators earth heel
Double Pole Manually Operated Isolators earth heel
Measuring and protection Equipment
25 KV, 3.3. KV Cables
25 kV Feeder Cable
Return feeder Cable
Jumper Assembly between OHE & Isolator, feeder & isolator, OHE & LT/BT or similar
C & M Cables
Marshalling box
Wiring
C&M Cables (FP,SP, SS & SSP)
Sheath Voltage Limiters with link box
Erection
Erection (Feeding Post )
Erection of 25kV,3.3kV cables and C & M Cables/ wiring
Testing and Commissioning (Feeding Post )
Total
WORK DESCRIPTION
ITEM No.
Switching Stations
Provision of flexible PVC pipes to link Marshalling Box outlet to cable trough along viaduct / Atgrade
Provision of flexible HDPE pipes between the Marshalling box and control boxes of pole-mounted switchgears, PT's, CVS, CB, LA, Isolator etc.
Provision of HDPE pipes between Upside and Downside of viaduct to carry connecting cables
Integral Transverse Links-
Provision of HDPE pipes to carry cables across/along track for ITL connections
Cable Paths
From AMS/ASS to ASS and TSS to FP, Depot
Cut and Cover
Schedule E - to be operated under any unforeseen conditions in the project, shall be operated as per mutual agreement with the Employer. Schedule A13,t to carryout construction work under power block condition Bidder shall not quote against the schedule E & schedule A13. The employer/engineer shall not consider these amounts for bid evaluation.The lumpsum price quoted by bidder against entire work shall be considered for all the schedules except schedule E and A13.
Pipe in C&C or elsewhere
Land Preparation - civil
Oil Tank for Transformer included in item 22.12.1
CAD welding, hand rail earthing, mast earthing, OPC & earth terminal, metallic part of mast & cantilever are included in the above supply item 12 of Schedule A2 Earthing assemblies
Pucca Road restoration
Nallah Crossing
Track crossing for 33 kV cables or 25KV & 3.3KV or C&M cables
On new viaduct
OHE SPARES
Total
ITEM No. A9
All Consumable spares during DLP (Grease and lubricants, battery water, HT and PVC Tape, Anti track paint, Rust remover, sand paper, maintenance cloth etc.)
Total BOQ - SCADA
8''x8'' BFB with & without base plate
B-200 with & without base plate
B-225 with & without base plate
Tubular structures Type-1 incl SPS
Tubular structures Type-2 incl SPS
Drop Arm 6" x 6" BFB
Drop Arm 8"X6" RSJ
Drop Arm Channel
M20X65 GI Bolt,Nut,Lock Nut & FW
M20 Tappered Washer
DA Adapter
BFBE 5.35 Mtr
BFBE 4 Mtr
M16X50 GI Bolt,Nut,Lock Nut & FW
Link Plate
Guy rod
Guy Rod double Strap assembly
Cleat Angle
Mast Anchor Fitting
Mast Guy Rod Fitting
M20X280 GI Bolt,Nut,Lock Nut & FW
BFBU Mast Anchor Adopter
BFBU Mast Guy Rod Fitting
M20X380 GI Bolt,Nut,Lock Nut & FW
M16X120 GI J Bolt,Nut,Lock Nut & FW
Fastening for Top Tube Assembly
Mast Bottom Fitting
Backing angle
M16X260 GI Bolt,Nut,Lock Nut & FW
Adopter
Backing angle
M16X220 GI Bolt,Nut,Lock Nut & FW
Mast Top Fitting
MCC RDSO
MCC Clamping angle
OPC & RC suspension clamp
Safety Screen Z Clamp
Safety screen J Clamp for 6x6 DA & 8X6 DA
Safety Screen Panels
M16X65 GI Bolt,Nut,Lock Nut & FW
Nine Tonne Adjuster
Cut-In Insulator Assembly
Post Insulator
Double Eye Distance Rod
Equalising Plate
Double Messenger wire clamp
25 kV Composite Bracket/Stay Insulator
Bracket U Bolt assembly
Bracket Stay bolt assembly
Summary of Schedules
Wind Stay dropper
Fixation wind stay dropper
Push Arm clamp
Push arm clamp part
Messenger clamp assembly
Copper rivet
SS Thimble
Hook clamp dropper for messenger wire
Eye End dropper
Out Rigger
Connector
PG clamp
M16X30 GI Stud Bolt, nut & SW
M16X50 GI 'L' Bolt, nut & SW
Bus bar Jumper clamp
95 SQ.MM Aluminium Lug
Number plate clamp for 8x8 BFB mast / B-series / tubular structures
Cautiion Plate clamp for 8x8 BFB mast / B-series / tubular structures
M10 Lead Washer
Mast Number plate fixing SPS
BFBU Mast Number Plate fixing clamp
M10X35 GI Bolt,Nut,Lock Nut & FW
GI Bolt,Nut,Lock Nut & FW
Caution 25000Volts
Caution Near By OHE Restricted
Public Caution Board
Staff Caution Board
Electric Engine Stop Board
Clamp connecting 75Sqmm to 125Sqmm
Clamp connecting 75 Sqmm to 164 Sq.mm Crimping type
Clamp connecting 125 Sqmm to 164 Sqmm Jumper wire
Clamp connecting 26 Sqmm to 125 Sqmm Jumper wire
Clamp connecting 26 Sqmm to 5mm dropper wire
Clamp connecting 26 Sqmm to 150 Sqmm Jumper wire
Bend type Steady Arm for IOL
Normal steady arm
PG Clamp OPC
PG clamp 1031
PG clamp 1041
Catenary Wire - 120 sq mm (Cu-Mg)
Contact Wire -150 sqmm (Copper Silver)
Anticreep Wire - 120 sq mm (Cu-Mg)
Feeder Wire 145 Sqmm (Cross/Slack Feeder)
PG clamp 1051
Termination assembly for OHE, comprising of one contact wire and one messenger wire/large span wire
Continuity "G" 164 sqmm Jumper wire for main line
Termination assembly for Feeder Wire (Slack/Cross Feeder)
Termination assembly for Single Contact Wire (150 sq.mm)
Termination assembly for OPC
Buried Earth Conductor (BEC)
Return Conductor
Splice Messenger Wire
Dropper Assembly
Splice Contact Wire
Cantilever assembly For Push-off with composite insulators
Cantilever assembly For Pull-off with composite insulators
Jumper Between Contact wire and Messenger wire (H),
Jumper Between two OHE's.(G),
Jumper Between two OHE's.(F),
Connection Between OHE Mast and BEC
Connection Between BEC and Earth Terminal (number of Piers *4, )
Connection Between BEC and Rail (at ITL)
Integral transversal link
Automatic Tensioning Device of Spring Type
Automatic Tensioning Device assembly of 5-Pulley Block Type including all fittings, Weight and ATD Cage with SS rope
Line Cover for catenary
Anti Bird Nesting net
Anti Bird Disc
Section insulator Type I(Suitable for main line)
Section insulator installation tool
Short neutral section assembly(PTFE type)
Neutral section runner (Set of right skid)
Neutral section runner (Set of left skid)
Neutral section PTFE rod
High voltage insulator cleaning paste for NS PTFE rod
Neutral section installation tool
Hand operated hydraullic Crimping tool (with Die set of different sizes)
Spares for OHE Depot
Bracket tramway type
Bridle Wire with all fittings 35sq.mm
Top tube fitting for bracket
Double Pole isolator with mechanism box with earthing heel (manual)
Single Pole isolator with mechanism box (motorized)
Earthing heel spare
Male and female contact of isolator
Arcing Horn
Single strand Dropper wire
Dropper clip for Contact wire RDSO
Dropper clip for Bridle wire RDSO
Automatic Tensioning Device assembly of 5-Pulley Block Type including all fittings, Weight
50x6mm GI flat strip for structure bond
SS Rope for 5 pulley ATD with ending cone at both end
Centre Bolt for Counter wt. with Nut and locking pin
Ending cone for Feeder wire
8x8 BFB Mast without base plate
B200 Mast without base plate
B200 /175/225 Mast without base plate
BFBU Mast without base plate with Boom for Portal 'R' type / 5 track
Termination for OPC
Overhead protection conductor (OPC) 93.3 sqmm ACSR
OPC Suspension Clamp
OPC Strain Clamp
Guy rod assembly for depot
Section insulator type 2 suitable for depot
TTC mast assembly
Contact wire 107 sqmm
Circuit Breakers
Interrupters
Spares for Traction Main Line & Depot
SP Isolator (MOTOR Operated)
DP Isolator (Motorised Operated)
Capacitive voltage sensor
LA 42 kVA
Control card set of BM
L pad of BM
Connector of BM
Earthing heel of Isolator
Male female contacts of isolator
Bimetallic strip
Panel Locks of BM, Castle lockset, Indicating lamps etc
1 C x 400 sq.mm 25kV Aluminium Cable (FRLS)
1 C x 400 sq.mm 3.3kV Aluminium Cable (FRLS)
Straight through Joints for 25 kV Cable
Straight thorugh joints for 3.3 kV Cable
End Terminations for 25 kV Cable
End Terminations for 3.3 kV Cable
Instruments and Testing Kits
Instruments and Testing Kits
Instruments and Testing Kits
Instruments and Testing Kits
Instruments and Testing Kits
Instruments and Testing Kits
Instruments and Testing Kits
Instruments and Testing Kits
Instruments and Testing Kits
Instruments and Testing Kits
Instruments and Testing Kits
Instruments and Testing Kits
Instruments and Testing Kits
Instruments and Testing Kits
Instruments and Testing Kits
Instruments and Testing Kits
V Bolt of Guy Rod
Spares for RRV
Complete Cantilever Assembly
Steady Arm Bend Type for main line
Spares for CMV
Automatic Tensioning Device assembly of 5-Pulley Block Type including all fittings, Weight and ATD Cage
ST, BT, RT cap
Section insulator with accessories (in box)
Inclined dropper
J - Bolt
Special Type Steady Arm for IOL
Catenary Wire - 120 sq mm (Cu-Mg)
Span Dropper Wire (Electrolytic hard drawn Cu)
OPC wire
Contact Wire -150 sqmm (Copper Silver)
RC Wire
I - sec Steady Arm (High speed)
Bracket Tube fitting
Span dropper assembly of various sizes
Stay Tube fitting
Total
ITEM No.
All Consumable spares during DLP (Grease and lubricants, battery water, HT and PVC Tape, Anti track paint, Rust remover, sand paper, maintenance cloth etc.)
Total BOQ - SCADA
Special PG of Section Insulator
Site Design of OHE
Special PG of Section Insulator
TOTAL OHE
Final Design
Schedule of Materials
Instruments and Testing Kits
Instruments and Testing Kits
Total
Man Power (Itervening Period) Manpower cost to be deployed by contractor during intervening period between Energisation & Taking Over of OHE till Revenue Operation Date
All Consumable spares during DLP (Grease and lubricants, battery water, HT and PVC Tape, Anti track paint, Rust remover, sand paper, maintenance cloth etc.)
FC2-USD
For OHE, Switching stations
Man Month
ITI with 3 years similar Exp.
Total
Atleast 10th Pass with 1 year similar Exp.
All Consumable spares during DLP (Grease and lubricants, battery water, HT and PVC Tape, Anti track paint, Rust remover, sand paper, maintenance cloth etc.)
TOOLS & PLANT
New QTY
Tirfor 5.0 Tonne/ 3.0 Tonne with 20m steel rope
Instruments and Testing Kits
Pull - lift 3/4 Tonne (with loop type chain)
Come along clamps for catenary suitable for 19/2.108 mm conductor(65)
Come along clamps for contact wire 107 mm2
Come along clamps for contact wire 150 mm2
Come along clamps for catenary wire 120 mm2
come along clamps for ACSR conductor 93.3 sqmm
come along clamps for ACSR conductor 233.3 sqmm
Earth Discharge rod complete (light weight 11 kgs (As per RDSO spec. ETI/OHE/51(9/87) Re. 1, Oct 92 H-6 to be supplied)
Aluminium Straight ladder (8m) with Hook on top
Aluminium Straight ladder extensible (11m)
Drilling machine (25mm) Motor Driven (radial or pillar)
Bench Grinder (Double end) pedastal motor Driven (203 mm) disc
1Ph portable welding machine only required
Portable Diesel Generating set 3 KVA 240 V, 1Ph
Contact wire Cutter 36 inch
Instruments and Testing Kits
Dropper wire Cutting 12 inch
Single Sleeve pully block 3 1/2" x 1/2" Groove steel
Single Sleeve pully block 3 1/2" x 1/2" Groove steel fiber for drawl of contact catenary wire
Single Sleeve pully block 6" x 1" Groove steel (with top eye to be supplied, cap 2T, asper IS: 13156 of H-18 1991
Contact wire twist cum bender 6 inch
Steel sling with eye end 19mm dia (a) 1 m Long
Steel sling with eye end 19mm dia (b) 2 m Long
Steel sling with eye end 19mm dia (c) 3 m Long
Steel sling with eye end 19mm dia (d) 4 m Long
Steel sling with eye end 19mm dia (e) 10 m Long
Contact wire Splicing jig
Copper Hammer 2 kg
Metric tape 30 m, 15m each (PVC tape only)
Light weight ladder trolley
Engineering Ratchet
LED Tri colour lamps
Trifor 3 Tonner/2 Tonne
Spring balance 25 kg capacity
Wire claws (Panja)
Crow bar
Shovels
Sledge hammer 10 lb
Tree pruner ( with telescopic handle & saw blade)
3/4 inch Manila rope 100m
1/2 inch Manila rope 150m
1 inch Manila rope 50m long
Instruments and Testing Kits
Manual rail hole drilling Rachet and clamp with chamfering tool
Dynamometer 10-Tonne capacity with carrying box with 150 mm dia with test certificate
High focus LED reachargeble hand torch light.
Walkie Talkiesets ( with 2 km range working on 'c' band)
Megger 2500V
Digital earth clamp megger to be supplied
Light weight Tool Box
Set of tools for Technicians a) DE Spanner set from 6 TO 32 (12 PIECES)
Ring Spanner set 16x17, 18x19, 20x22, 24x26, 30x32, 36x40
Screw Driver 6 "
Screw Driver 12 "
Hammer 1/2 lb
Cutting plier
Plumb bob
Hack saw
Spirit Level
Reachargeable 30-watt power LED Flood Lights
Industrial Digital Thermometer
Digital Crane weighing scale with remote display & printer 5 t
Petrol Driven Light Weight Rail Drill machine with 52 kg & 60 kg Rail Adopter and 2 pairs of drills
Portable cutting machine (Hand Held)
Instruments and Testing Kits
Chain Saw 18" or 24" for tree cutting
Aluminium Ladder 15 mtrs for cross track feeder checking
Oilver G Plus testing kit as per latest RDSO Specification
Electronic Distance measuring equipment up to 500 m clear vision
Instruments and Testing Kits
Instruments and Testing Kits
Instruments and Testing Kits
Tower Car (CMV)
Item No A13
Lumpsum
Power Block Provision for Corridor 4
Total Amount
220kV GIS RSS Tools and Spares
DESCRIPTION
For any of the following combinations i) 2 circuits of 33kV cables & control cablesor ii) 2 circuits of 25kV & 3.3kV cables & Control cables
Firewall/L-3 Router (Qty for 2 sets, Included in item 55.2)
Table/Desk with attached Drawer (Qty for 2 sets, Included in Item 60)
Roller Chair (Qty for 2 sets, Included in Item 60)
Dew Point Measurement Kit (Qty in 1 lot, Included in Item 24 a)
Control Unit (BCPU) each type (Qty in 1 lot, Included in Item 24 a)
Set of Gas filling kit with all accessories. (Qty in 1 lot, Included in Item 24 a)
Annexure 3- DLP Spares
220 kV Outdoor/GIS termination kit (tor all 3 phases)
220 kV Straight Through Joints
Disconnecting Link Box for 3 phases with SVL)
Arrester
RCC protection covers
Cable route Marker
Set of tank gaskels and joints for 220 kV transformer
OLTC operating Motor
OLTC counter meter
OIL SURGE RELAY FOR OLTC
OIL TEMP. INDICATOR WITH ALARM AND TRIP CONTACT
WINDING TEMP INDICATOR WITH ALARM AND TRIP CONTACT
For any of the following combinations i) 2 circuits of 33kV cables & control cables or ii) 2 circuits of 25kV & 3.3kV cables & Control cables
AUTOMATIC VOLTAGE REGULATOR FOR RTCC Panel
MAGNETIC OIL LEVEL GAUGE. WITH LOW OIL LEVEL ALARM CONTACT
PRISMATIC TYPE OIL LEVEL GAUGE
HT and LT bushings
Silica gel breather (OLTC & Main Tank)
220 kV clamps & connectors used in RSS switchyard.
All type of indications and ilumination lamps for 220 kV Equipment
Drive motor for disconnector and earth switch
GIS L A counter
Spring charging motor
POTENTIAL TRANSFORMER (PT) 33 kV Swachgears with Fuse
All type of indications and illuminous lamps for 33 kV Equipment
Fuse. MCB,Switches, Connectors, heating elements for 33 kV Equipment
Amount (INR)
33 KV Multi core CT suitable for 33kv system
25kV Drive motor of VCB
25kV Drive motor of dis-connector
25kV CB Closing coils
Termination Kit for 33kV
25kV CB Tripping coils
Register arm assembly
Fuse, MCB.Diodes, switches. connectors. heating elements for 220 kV equipment
Fuse. MCB. switches, connectors, heating elements for 25 kV Equipment
Instruments and Testing Kits
Instruments and Testing Kits
Instruments and Testing Kits
Instruments and Testing Kits
Instruments and Testing Kits
Instruments and Testing Kits
Instruments and Testing Kits
Instruments and Testing Kits
Instruments and Testing Kits
Instruments and Testing Kits
Instruments and Testing Kits
Instruments and Testing Kits
Instruments and Testing Kits
Instruments and Testing Kits
Deleted
G1 Training Of Employer's Staff
Training in India
Substation Support
Maintenance & Operatonal manuals of RSS
Integrated testing and commissioning of RSS
As-built Drawing
Manning supervision upto ROD
Skilled
Semi-Skilled
Total
Security guard
Total Qty of 4 nos. of RSS
Item No
Supply,Delivery,Transportation,loading and unloading of 1C X 630 sq.mm Cu . Cable (25/52kV) Copper/XLPE/PVC, unearthed, FRLS cable
Laying, installation testing and commissioning of of 25 kV Copper single core 630 Sqmm HV cable.
Supply,Delivery,Transportation,loading and unloading of 1C X 630 sq.mm Cu . Cable (3.3kV) Copper/XLPE/PVC, unearthed, FRLS cable
Laying, installation testing and commissioning of of 3.3kV Copper single core 630 Sqmm HV cable.
Supply, Delivery, Transportation, Loading and Unloading of 220kV,1000 Sq.mm, single core Aluminum conductor EHV Cable.
Supply and installation of 220kV, 1000 sqmm Aluminum cable Joints.
220 kV Cable
Supply of pilot wire cable/FO Cable armoured indoor /outdoor for comminication (FO cable-48 core,9 fibre or as per approved GTP from Kride)
Instruments and Testing Kits
Instruments and Testing Kits
Instruments and Testing Kits
Instruments and Testing Kits
Supply and installation of 220kV, 1000 sqmm Aluminum cable termination (outdoor type)
Instruments and Testing Kits
Supply and installation of 220kV, 1000 sqmm cable termination (GIS male type & GIS female type to be fixed inside GIS.
ckt mtr
Supply and installation of Three phase of Link box with SVL
Cable Laying, Testing and Commissioning
Supply and installation of Three phase of Link box without SVL
Supply and installation of Link boxes Chambers
Meter
Laying of pilot wire cable/FO Cable armoured indoor /outdoor for comminication (FO cable-48 core,9 fibre or as per approved GTP from Kride) including jointing splicing, terminations etc.
220kv cable Laying, through Trenchless, Laying on under ground, in pipes/ducts including cable route Survey.(8.5km)
Termination Kit for 25kV
Excavation in all types of soil including dressing, back filling & leveling of trench and dispensing of surplus excavated soil at designated area approved by Engineer/Employer
Supply / Providing of Cement Concrete 1:3:6 mix as per site requirements
Supply and Installation of Route markers / Joint Marker
Supply / Providing of Gl Steel as per Site Requirement
Earthing Material for Jointing Bay
Instruments and Testing Kits
Testing and comissioning of entier work
Supply and installation of RFID Tags
33 kV Cable
Supply of 33 kv Aluminum single core 120 Sqmm HV cable.
Laying, installation testing and commissioning of 120 Sqmm HV cable.
Supply and provision of manpower and logistics support and OEM certified jointer for making of Heat shrinkable End terminations
Instruments and Testing Kits
Instruments and Testing Kits
25 kV Cable & 3.3kV Cable
Instruments and Testing Kits
Instruments and Testing Kits
Supply and erection of Termination kit for 25kV Cable
BASIC Amo
unt To be entered by the bidder (Please refer *** Note-1)
Total
Supply and erection of Termination kit for 3.3kV Cable
Total Qty of 4 nos. of RSS
Total Qty.
220 KV GIS SWITCHGEAR Supply
Supply of 220 kV Incoming GIS Bay as per specifications
Supply of Traction Transformer Feeding Bay as per specifications
Supply of Auxiliary Transformer Feeding Bay as per specifications
Erection of Item 49 to item 60 (included in supply)
Supply of 220 kV Coupling Bay including busbar coupling bay as per specifications
220 KV GIS SWITCHGEAR Erection Installation testing and Commissioning
Erection including testing and commissioning of 220 kV Incoming GIS Bay as per specifications
Erection including testing and commissioning of Traction Transformer Feeding Bay as per specifications
Erection including testing and commissioning of Auxiliary Transformer Feeding Bay as per specifications
Erection including testing and commissioning of 220 kV Coupling Bay including busbar coupling bay as per specifications including Bus VT Module Busbar and other items
LIGHTING CUM LIGHTNING MAST
Supply of support structures for mounting equipment and lightning mast with complete hardware as per specifications and drawings.
Erection including testing and commissioning of support structures for mounting equipment and lightning mast with complete hardware as per specifications and drawings.
PROTECTION AND CONTROL PANEL FOR 220KV GIS
Design, Supply of Control Panel for Incomer Feeder (220 kV Incoming GIS Bay) as per specifications
Design, Supply of Outgoing Feeder (220/33kV Auxiliary Transformer Feeding Bay) as per specifications
Design, Supply of Outgoing Feeder (220/27.5kV Traction Transformer Feeding Bay) as per specifications
Design, Supply of 220 kV Coupling Bay as per specifications
Design, Supply of 220 kV Busbar Protection Bay as per specifications
Erection, Installtion Testing and commissioning of Control Panel for Incomer Feeder (220 kV Incoming GIS Bay) as per specifications
Erection, Installtion Testing and commissioning of Outgoing Feeder (220/33kV Auxiliary Transformer Feeding Bay) as per specifications
Erection, Installtion Testing and commissioning of Outgoing Feeder (220/27.5kV Traction Transformer Feeding Bay) as per specifications
Erection, Installtion Testing and commissioning of 220 kV Coupling Bay as per specifications
Erection, Installtion Testing and commissioning of 220 kV Busbar Protection Bay as per specifications
SAS SYSTEM
Server equipments as per specifications
Gate way and work station (price included in item - 10.1 above) as per specifications
Converter (price included in item - 10.1 above) as per specifications
Printers (price included in item - 10.1 above) as per specifications
Storage, desk and chairs (price included in item - 10.1 above) as per specifications
Supply of 415 V, 3-Phase, 5 KVA UPS with Battery as per specifications
Erection/ Installation, Testing and Commissioning of 415 V, 3-Phase, 5 KVA UPS with Battery as per specifications
LV & Control Cables
Supply of LV Control & power cables as per specifications
Laying, testing and commissioning of LV Control & power cables as per specifications
Supply, erection of hot dip galvanised steel cable trays/raceways/ladders including suspending rods and associated fittings for completion of job
T1- TRACTION SUBSTATION
TRACTION TRANSFORMER
Design, Manufacture & Supply of 220(27.5 kV, 40/50 MVA (ONAN/ONAF) Traction Transformer including Terminal Connectors with NIFPS and all accessories as mentioned In Brief Particular Specifications required for commissioning of Traction Transformer.
Erection/Installation, Testing and commissioning of 220(27.5 kV, 40/50 MVA (ONAN/ONAF) Traction Transformer including Terminal Connectors with NIFPS and all accessories as mentioned In Brief Particular Specifications required for commissioning of Traction Transformer.
Supply of Fittings & other components primary side for completion of Power Transformer as per specifications and drawings (Including PI, Fixing of Clamps/connector etc.,)
Erection, Testing & commissioning of Fittings & other components primary side for completion of Power Transformer as per specifications and drawings (Including PI, Fixing of Clamps/connector etc.,)
Supply Fittings & other components secondary side for completion of Power Transformer as per specifications and drawings (Including PI, Fixing of Clamps/connector etc.,)
Erection, Testing & commissioning Fittings & other components secondary side for completion of Power Transformer as per specifications and drawings (Including PI, Fixing of Clamps/connector etc.,)
Supply, Erection, testing and commissioning of 3"x80mm and 90mm O.D IPS Al. tube with associated connectors and any other material to make the job complete including cutting and bending etc.
Tonne
25 kV SWITCHGEAR
Supply of 25 kV Incoming GIS Bay as per specifications
Supply of 25 kV Outgoing Bay as per specifications
Supply of 25 kV Coupling Bay as per specifications
Supply of Bus VT Module as per specificati
Erection including testing and commissioning of 25 kV Incoming GIS Bay as per specifications
Erection including testing and commissioning of 25 kV Outgoing Bay as per specifications
Erection including testing and commissioning of 25 kV Coupling Bay as per specifications
Erection including testing and commissioning of Bus VT Module as per specifications
25 kV CONTROL AND PROTECTIONAL PANEL
Design, Supply of Control and Protection Panel for Incomer Feeder as per specifications
Design, Supply of Control and Protection Panel for Outgoing Feeder as per specifications
Design, Supply of Control and Protection Panel for Coupler Feeder as per specifications
Erection including testing and commissioning of Control and Protection Panel for Incomer Feeder as per specifications
Erection including testing and commissioning of Control and Protection Panel for Outgoing Feeder as per specifications
Erection including testing and commissioning of Control and Protection Panel for Coupler Feeder as per specifications
Supply Installation testing and commissioning of Burried Rail/RCMB (13 mtrs) and associated assemblies with making of holes and connection of cables and GI flat with copper MET as per drawing
A1- AUXILIARY MAIN SUBSTATION
Design, Manufacture & Supply of 220/33 kV, 15/20 MVA (ONAN/ONAF) Auxiliary Main Transformer including Terminal Connectors with Nitrogen Injection Fire Prevention System (NIFPS) with all accessories mentioned in Brief Particular Specifications required for commissioning of Auxiliary Main Transformer.
Supply of Primary Neutral Isolator as per specifications
Supply of Primary Neutral Current Transformer as per specifications
Supply of Primary Neutral Ligntning Arrester as per specifications
Supply of 24kV, 50Hz, 20 Ohm Secondary Neutral Grounding Resistor including Compact Switching Unit comprising of 2 SNCT, 1 SNLA, 1 SN ISOLATOR mounted in a Cubicle.
A1- AUXILIARY MAIN SUBSTATION
Fittings & other components for completion of Power Transformer as per specifications and drawings
Erection, Testing and commissioning of 220/33 kV, 15/20 MVA (ONAN/ONAF) Auxiliary Main Transformer including Terminal Connectors with Nitrogen Injection Fire Prevention System (NIFPS) with all accessories mentioned in Brief Particular Specifications required for commissioning of Auxiliary Main Transformer.
Erection, Testing and commissioning of Primary Neutral Isolator as per specifications
Erection, Testing and commissioning of Primary Neutral Current Transformer as per specifications
Erection, Testing and commissioning of Primary Neutral Ligntning Arrester as per specifications
Erection, Testing and commissioning of 24kV, 50Hz, 20 Ohm Secondary Neutral Grounding Resistor including Compact Switching Unit comprising of 2 SNCT, 1 SNLA, 1 SN ISOLATOR mounted in a Cubicle.
Erection, Testing and commissioning Fittings & other components for completion of Power Transformer as per specifications and drawings
33 KV PANEL
33kV Switchgear incoming AIS panels as per specifications
33kV Switchgear Outgoing AIS panels as per specifications
33kV Switchgear Coupling AIS panels as per specifications
Measuring and Protection AIS equipments as per specifications
Control and Monitoring AIS equipments as per specifications
Erection, Testing and Commissioning of 33kV Switchgear panel in AMS building consist of above items (17.1 to 17.5) and other rewalted measuring and protection equipments, including fixing of base frame, inter connection of cubicles, fixing of busbar and all loose supplied items, interpanel wiring etc.
33 kV/ 415V, 200 kVA Auxiliary Station transformer
Supply of 33 kV/ 415V, 200 kVA Auxiliary Station transformer as per specifications
Erection including testing and commissioning of 33 kV/ 415V, 200 kVA Auxiliary Station transformer
AUXILIARY ITEMS
Supply of Battery Charger (2 Main + 1 Standby) as per specifications
Erection including testing and commissioning of Battery Charger (2 Main + 1 Standby) as per specifications
Supply of Battery Bank - 300 Ah (2x100%) as per specifications
Erection including testing and commissioning of Battery Bank - 300 Ah (2x100%) as per specifications
Supply of ACDB as per specifications
Supply of ACDB as per specifications
Erection including testing and commissioning of ACDB as per specifications
Design, Supply and erection including testing and commissioning of DCDB as per specifications
Supply and erection of Safety Equipment
Metering Equipments
Energy Meter for metering 220kV Power as per specifications
Energy Meter for metering Traction Power as per specifications
Instruments and Testing Kits
Energy Meter for metering Auxiliary Power as per specifications
Anti bird disc (2 NOS)
Energy Meter for metering Depot Traction Feeder as per specifications
Land levelling and compacting
1. Clearing the site of all encumbrances, 2. Cutting/transporting trees, as absolutely necessary, with the approval of and in consultation with the Employer, strictly in accordance with local laws.
1. Leveling the site to a finished ground level, as approved by the Employer. 2. Compacting the ground, in accordance with standard engineering practices, and setting up of site facilities as per specifications 3. All other associated land preparation works
1. Pile cap 2. Retaining wall 3. Column upto plinth beam 4. Plinth Beam
1. Column above Plinth Beam 2. Casting of precastPanel 3. Erection of Precast RCC Panel 4. Painting of Precast Panel
1. Installation of Y-Post 2.Concertina Wire fixing
Land drainage including Rain Water harvesting
Transformers drainage and baffle walls
Access Road
Rail-Cum-Road
RCC Road
Earthing
RSS Design (OEM)
AMS and Control Room Building, Detail Design, preparation of detailed design for the GIS, AMS & Control Room Building, including Architectural services, Civil and Structural Designs, Lighting, Ventilation and Air conditioning, Detailed design shall include layout drawings, design calculations etc.
Termination Kit for 3.3kV
After completion of 1. Pile cap Foundation 2. Plinth beam
After completion of 1. Column up to 2nd slab, 2. 2nd slab casting of Control room and GIS Hall 3. Brickwork upto 2nd slab & Mumty level.
After completion of 1. Internal & external plastering & 2. All finishing including fixing of doors & windows
Providing the various facilities in the AMS & Control Room Building, such as but not limited to light fittings & sockets, fans, VRV based air-conditioners, fire detection and alarm system, yard lighting, earth-mesh under the building and earth-risers, earthing inside the room, all facilities as described in specifications etc.
Include permanent provision of EOT crane in the GIS room for a capacity of not less than 5T capable of installing the GIS switchgear. This shall include cranes and lifting equipment wherever required for installation, testing and commissioning.
Guard Room
Signages
Cable trenches and cables trough
220 kV/25 kV Traction transformer foundations, (along with materials) - Foundations along with materials of the entire 25 kV system of Traction Substation
220 kV/33 kV Auxiliary Main transformer foundations,PNCT, NGR, PNLA & CTS foundations (along with materials).
Testing and Commissioning
Storage space
Retractable OCS (Erection included in supply of item 21 of Schedule A4)
Total
Landscaping and Plantation
ITEM No.
Bill No. C1
BILL NO. ASS C2 & C4
AUXILIARY MAINLINE
33 kV / 415 V Transformers, 500 kVA
33kV/415 transformer, 630 KVA
33 KV AIS SWITCHGEAR
Protection Circuit Breaker (1250A) panels, with CT and PT, complete and associated assemblies
Protection Circuit Breaker (1250A) panels, with CT, complete and associated assemblies
Transformer Protection Circuit Breaker (1250A) Panels, with CT, complete and associated assemblies
Coupl
ing Motorised Circuit Breaker (1250A) panel complete with Bus Riser Panel and associated assemblies
Pilot Wire Relays and associated assemblies
Measuring and protection Equipment (Each ASS's)
Bus PT Panel and associated assemblies
Automatic Fire protection system for panels
Automatic Fire protection system for Transformer
Auxiliary Feeding (DC-UPS Protection) for elevated/at grade stations
Battery, Battery Chargers (Type I)-180AH
All other Equipments (ACDB, DCDB etc.,)
Safety Equipment
33 kV Cables and connections
33 kV Cables (with 120 sq mm Aluminium) and connections(FRLS)
Low voltage power cables and connections for ASS
Pilot Wire Cables (FRLS)
Supply & Erection of 33kV indoor termination heat shrink type for 120 sqmm Aluminium cable (FRLS).
Supply & Erection of 33kV Straight Through Joints heat shrink type for 120 sqmm Aluminium cable (FRLS).
3 phase Surge Arrestor with Associate Assembly for 33kV panel
Surge Arrestor with Associate Assembly for Transformer panel (phase - phase, phase - ground) 6 nos. in each Transformer
33kV Trefoil Clamps/cleat
SOCKET ALONG THE VIADUCT
Viaduct Sockets, associated Fittings
Cable for feeding the Viaduct Socket
LIGHTING ON THE VIADUCT
Lights, Lighting on viaduct, Cables & Associated Fittings
Cable for feeding the viaduct Lights
ERECTION
EARTHING & CABLE TRAYS INSIDE ASS
Earth bus inside the ASS and Earthing Connections
Cable path / trays and associated fittings inside ASS room
Laying of 33KV 1CX120 sqmm cable Aluminium cable (FRLS).
MANNING OF COMMISSIONED ASS's,MANPOWER AND DESIGN COST
Highly Skilled (Supervisor)
Manpower Cost
ITI with 3 years similar Exp.
Field Engineer (8 hr shift)
Design of ASS
Schedule of Materials
Total
Schedule of materials
ITEM No.
Bill No. C2
BILL NO. ASS C2 & C4
Qty Depot C-2
Instruments and Testing Kits
33kV/415 transformer, 630 KVA
Instruments and Testing Kits
Protection Circuit Breaker (1250A) panels, with CT and PT, complete and associated assemblies
Protection Circuit Breaker (1250A) panels, with CT, complete and associated assemblies
Transformer Protection Circuit Breaker (1250A) Panels, with CT, complete and associated assemblies
BILL NO. ASS Depot
ing Motorised Circuit Breaker (1250A) panel complete with Bus Riser Panel and associated assemblies
Pilot Wire Relays and associated assemblies
Measuring and protection Equipment (Each ASS's)
AUXILIARY MAINLINE DEPOT
33 kV / 415 V Transformers, 2500 kVA
Measuring and protection Equipment (Depot ASS's)
Bus PT Panel and associated assemblies
Automatic Fire protection system for panels
Overcurrent Realy
LV Bus Duct for Depot
Battery, Battery Chargers (Type I)-180AH
All other Equipments (ACDB, DCDB etc.,)
WIRING
33 kV Cables and connections
33 kV Cables (with 120 sq mm Aluminium) and connections(FRLS)
Low voltage power cables and connections for ASS
Pilot Wire Cables (FRLS)
Supply & Erection of 33kV indoor termination heat shrink type for 120 sqmm Aluminium cable (FRLS).
Supply & Erection of 33kV Straight Through Joints heat shrink type for 120 sqmm Aluminium cable (FRLS).
3 phase Surge Arrestor with Associate Assembly for 33kV panel
Instruments and Testing Kits
Instruments and Testing Kits
SOCKET ALONG THE VIADUCT
Instruments and Testing Kits
Instruments and Testing Kits
LIGHTING ON THE VIADUCT
Lights, Lighting on viaduct, Cables & Associated Fittings
Cable for feeding the viaduct Lights
ERECTION
EARTHING & CABLE TRAYS INSIDE ASS
Earth bus inside the ASS and Earthing Connections
Battery, Battery Chargers (Type II)
Laying of 33KV 1CX120 sqmm cable Aluminium cable (FRLS).
MANNING OF COMMISSIONED ASS's,MANPOWER AND DESIGN COST
Total
ASS Spare C2 & C4
ITEM No.
Total BOQ - SCADA
ASS Spare C2 & C4
MANNING OF COMMISSIONED ASS's
Bill no. C3
PSI SPARES FOR Elev. ASS Main Line & Depot
Spares for ASS
33 kV CB 1250A
Auxiliary Transformer 500 KVA complete
Auxiliary Transformer 630 KVA complete
Battery, Battery Charges (Type I)
Battery, Battery Charges (Type II)
ACDB & DCDB
O/C Relay
E/F relay
AUXILIARY MAINLINE DEPOT
MTR relay
Pilot Wire Relay
Differencial Relay
33kV Breaker Poles
33kV breaker gasket set
33kV breaker tulip contract set
33kV breaker auxiliary set
33kV breaker sliding rail set
33 KVCabIe lCx 120sqmm Al Cable (FRLS)
Straight through joint kit
Nos. Per Phase
ITEM No.
Total BOQ - SCADA
Bill No. D1
CM1 OCC &BCC
TOTAL Qty (A)
CONTROL & MONITORING Main OCC and Backup OCC
Server
Dual Redundant SCADA Database Servers (Main and Standby) For Corridor 01,Corridor 02 Corridor 03 & Corridor 04
Dual Redundant SCADA Communication Servers (Main and Standby) For Corridor 01,Corridor 02 Corridor 03 & Corridor 04
SCADA Archive and Backup Server For Corridor 01,Corridor 02 Corridor 03 & Corridor 04
Rack for servers with Power Supply Arrangement For Corridor 01,Corridor 02 Corridor 03 & Corridor 04
WorkStation
Operator Workstation with dual Monitor (For Corridor 01,Corridor 02 Corridor 03 & Corridor 04)
Workstation for Network Management System (For Corridor 01,Corridor 02 Corridor 03 & Corridor 04)
Disturbance Recorder (DR) Workstation (For Corridor 01,Corridor 02 Corridor 03 & Corridor 04)
Engineering Workstation (For Corridor 01,Corridor 02 Corridor 03 & Corridor 04)
O&M workstation (For Corridor 01,Corridor 02 Corridor 03 & Corridor 04)
SCADA software
SCADA Software OCC (For Corridor 01,Corridor 02 Corridor 03 & Corridor 04)
SCADA Software BCC (For Corridor 01,Corridor 02 Corridor 03 & Corridor 04)
DR Analysis and Relay Configuration Software for DR Workstation (For Corridor 01,Corridor 02 Corridor 03 & Corridor 04)
Hand operated hydraullic Crimping tool (with Die set of different sizes)
Contact wire 107 sqmm
End Terminations for 3.3 kV Cable
V Bolt of Guy Rod
Communication Equipments, Cables & Security Systems
Redundant SCADA LAN including managed switches, FO & LAN cables and all accessories for communication over SCADA dedicated/dark Fiber Network (For Corridor 01,Corridor 02 Corridor 03 & Corridor 04)
Firewall and Security system (For Corridor 01,Corridor 02 Corridor 03 & Corridor 04)
Printers
Laserjet B/W A4/A3 (For Corridor 01,Corridor 02 Corridor 03 & Corridor 04)
Laserjet Colour A4/A3 (For Corridor 01,Corridor 02 Corridor 03 & Corridor 04)
Auxiliary Feeding Distribution
2x20kVA UPS with Battery Set for minimum 3 hr backup at OCC/BCC only (For Corridor 01,Corridor 02 Corridor 03 & Corridor 04)
Auxilliary Power Feeding Distribution including cables, ACDBs and all other accessories (For Corridor 01,Corridor 02 Corridor 03 & Corridor 04)
Hand operated hydraullic Crimping tool (with Die set of different sizes)
Drop Arm 8" x 6" RSJ ( For Multiple Cantilever)
WorkStation (Qty for 1 set, Included in Item 59.1)
24" LED Display (Qty for 1 set, Included in Item 59.1)
Hand operated hydraullic Crimping tool (with Die set of different sizes)
Large Video Display Screen (LVDS) at OCC only (6*2 MATRIX Minimum 70" LASER BASED REAR PROJECTION)
Hand operated hydraullic Crimping tool (with Die set of different sizes)
Roller Chair (Qty for 1 set, Included in Item 59.1)
Training Simulator
Total
Training Server cum Workstation and Trainee Work Stations (For Corridor 01,Corridor 02 Corridor 03 & Corridor 04)
ITEM No.
Total BOQ - SCADA
Testing and commissioning
CM2 RTU
BILL NO. S1 & S2 CM2 RTU
LINE EQUIPMENTS CONTROL & MONITORING Station equipments-RTU
Elevated Stations
RTU for Elevated ASS
Extra for OHE switching station (SS/SP/SSP/FP)
C&M Cables
Training Room Furnitures (For Corridor 01,Corridor 02 Corridor 03 & Corridor 04) (Included in Item 59.1)
Training Simulator
Cables from Elevated ASS equipments to RTU
ITEM No.
Total BOQ - SCADA
Cables from Elevated SP/SSP/SS/FP equipments to RTU
Bill No. D3
BILL NO. S3 CM3 DEPOT
CONTROL & MONITORING (SOLADEVANAHALLI Depot)
Station equipments-RTU
RTU at DEPOT ASS
Table/Desk with attached Drawer (Qty for 1 set, Included in Item 59.1)
RTU at DEPOT FP
Total
Cables from ASS equipments to RTU
Cables from FP equipments to RTU
Total BOQ - SCADA
Bill No. D4
Item No.
Work Description
SCADA SPARES
Operating Terminal or Work-stations of similar hardware and software configuration as supplied at OCC
Server of similar hardware and software configuration as supplied at OCC
Printer (Laser type, A4 & A3)
Set of LAN Switches consisting one switch of each type as supplied at OCC
Programming software (of each type on CD with License) (One set contains all OCC/RTU software including communication troubleshooting software)
Optical Fiber Cable (SM, Armoured, FRLS-0H)
RTU Rack with all modules equivalent to elevated ASS RTU
RTU Ethernet Switch
RTU Power Supply Module
ITEM No.
Total BOQ - SCADA
Each type of Interface cable required between RTU & Server for troubleshooting/ downloading data from Laptop (USB type)
CM4 AMC SCADA
BILL NO.: S5 AMC 1
Dual Redundant SCADA Communication Servers (Main and Standby) For Corridor 01,Corridor 02 Corridor 03 & Corridor 04
AMC FOR VARIOUS CONTROL & MONITORING SCADA EQUIPMENTS COVERED UNDER BOQ ( INCLUDING ALL SOFTWARE AND HARDWARE)
AMC Cost of C&M equipments covered under CM1 OCC & BCC Schedules.
(+/-) AMC cost for each addition/deletion of following C&M equipments covered under CM1 Schedules.
Large Screen video Display Unit
LVS(Large video screen) video wall additional cubes.
AMC cost for Line equipments covered under following CM2 & CM3 schedules
S1 CM2 (Benniganahalli to Soladevanahalli)
S1 CM2 (Heelalige to Rajankunte)
S2 CM3 Soladevanahalli Depot
Total
Total
TOTAL
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.06 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.38 MB
PST_Drawings_3.rar
Tender Documents • 31.38 MB
PST_Drawings_2.rar
Tender Documents • 22.61 MB
PST_Drawings_1.rar
Tender Documents • 25.16 MB
PST_Tenderdocument.rar
Tender Documents • 22.92 MB
BOQ_239417.xls
BOQ • 0.54 MB
Tenderdocument.rar
Tender Documents • 22.61 MB
Tenderdocument_2.rar
Tender Documents • 31.38 MB
Tenderdocument_3.rar
Tender Documents • 22.92 MB
Tenderdocument_4.rar
Tender Documents • 25.16 MB
BOQ.xls
BOQ • 0.71 MB
PSTCorrigendum11.pdf
PDF • 0.04 MB
Corrigendum10PST.pdf
PDF • 0.16 MB
PSTCorrigendum9.pdf
PDF • 0.14 MB
Corrigendum7PST.pdf
PDF • 0.11 MB
PST_Additional_Drawings.rar
PDF • 6.23 MB
Corrigendum06.pdf
PDF • 0.79 MB
Responsetopostbidclarification.pdf
PDF • 0.84 MB
Corrigendum_drawings_PST.rar
PDF • 17.55 MB
Response_to_prebid_queries_PST.pdf
PDF • 1.40 MB
Corrigendum1_PST.pdf
PDF • 37.85 MB
Corrigendum4_PST.pdf
PDF • 0.14 MB
PSTCorrigendum3.pdf
PDF • 0.13 MB
PSTCorrigendum2.pdf
PDF • 0.14 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .