Puthalam Town Panchayat 15th FC 2022-2023 Tied Grant

Amount

Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc complete complying with SS20B. TNDSS No:23&24

Cement concrete of mix 1:4:8 (one part of cement four part of sand and eight part of aggregates) using 40 mm gauge machine broken granite stone jelly for foundation including de watering if found necessary and laid in layers of not more than 15 cm thick well rammed and consolidated etc complying with standard specification. TNDSS No:28

Cement concrete 1:2:4 (one part of cement two part of sand and four part of aggregates) using machine broken granite jelly of 20 mm size for all cement concrete works excluding cost of centering shuttering strutting and also cost of reinforcement grill in position but including laying vibrating with mechanical vibrators using finishing etc complete, as directed by the departmental officers etc complete complying with standard specification. TNDSS No:30

Supplying and fixing in position of vertical column arrangements with 80 mm Ø size GI pipe and base plate of size 30 x 30 x 10 mm and bed plate of size 30 x 30 x 12 mm and with support of 50 x 50 x 6 mm size angle are provided at base and bed plates to GI pies and drilling holes in the MS angles if necessary to accommodate the bolts, including one coat of red oxide primer etc. complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of base plate including all charges etc complete.

Supplying, fabricating, erecting structural steel trusses work for roofing welded or bolted type using necessary MS channels, "L" angles, 'I' sections, plates and round bars etc. each according to given design conforming to IS specification. It includes cutting, welding, conveyance of all materials to work site, primer coating and enamel painting and approved by the departmental officers etc complete as per standard specification.

Supply and fixing in position of best approved colour design and quality GI sheets of 1.6 mm thick with necessary 'U or 'J' bolts, bitumen washer and cutting the GI sheets to the required sizes etc. complete as per standard specification.

Supply and fixing of mild steel grill works for windows, ventilators etc including redoxide priming coat and cost of materials and all labour charges etc complete.

Brick work in cement mortar 1:5 (one part of cement five part of sand) mix using best country bricks of size 8¾"x4¼"x2¾" from approved quarry including curing, cost and conveyance of all materials to site and all labour charges etc complete as per standard specification.

Plastering walls with cement mortar 1:5 (one part of cement five part of sand) 12 mm thick including all cost and conveyance of all materials and all labour charges etc. complete as per standard specification. TNDSS No:61

Supplying and erecting centering to sides and soffits including supports and strutting with necessary centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86.

Cement concrete of mix 1:3:6 (one part of cement three part of sand and six part of aggregates) using 40 mm gauge machine broken granite stone jelly for foundation including de watering if found necessary and laid in layers of not more than 15 cm thick well rammed and consolidated etc complying with standard specification. TNDSS No:24

Laying with new C.C. Laminated tiles (Like Dora tiles Eurocon tiles etc), (anti skid) of 20 mm thick of approved special quality and set in Cement Mortar 1:3 (one part of cement and three part of sand) 20 mm. Thick using river sand and pointing with colour cement using at the rate of 0.40 kg/m² and mixing with colour pigment at the rate of 0.3 Kg/m² including finishing complete.

Wiring with 2 x 1.5 Sq.mm (22/0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box and 5A F.T. switch with painting of suitable colour for open PVC light point / fan point for electronic regulator. (Assume 6 points per coil) (SD-20)

Supply and fixing of single box type 4feet 40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fitting SD 88.

Wiring with 2 x 4 Sq.mm (56/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 mm x 100 mm x 63mm TW switch box for 15 A 3 pin non inter locking FT wall socket and 15A FT switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC power plug point. (SD-39)

T. IYAPPAN