Providing one additional toilet in every flat in the Transit Residence Building near ASEB gate at IITG Campus

(a) For thickness of tiles 10 mm to 25 mm

(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

1:5:10 (1 cement : 5 coarse sand (zone-ill) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)

1:2:4 (1 cement : 2 coarse sand (zone-ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and applying Tilegrout of approved brand for grouting of the tile joints, as per manufacturers specification, including cost of materials, labour, consumables, tools and tackles etc., complete.

Cement mortar 1:4 (1 cement :4 coarse sand)

(a) 1:4 (1 cement: 4 fine sand)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

(a) Size of Tile 600x600 mm

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-incharge.

(a) W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing C.P. brass short body bib cock 2-way with flange ((Make:Model :FLR-5041N of Jaquar or equivalent)) 15mm nominal bore

Providing and fixing C.P. brass angle valve 15mm dia. for basin mixer and geyser points (Make:Model : FLR-5053N of Jaquar or equivalent)

Poviding &fixing CP brass Health faucet with 8mm dia 1.2 metre long Flexible Tube with wall hook.Allied range of Jaquar or Equivalent

Providing & fixing stainless steel soap tray / Shower basket of approved make and design with necessary screws for toilets (Make : Model AKP 35731P of Jaquar Continental)

Providing and fixing C.P. brass stor cock 15mm dia. With flange (Make:Model : COP-081KPM of Jaquar or equivalent)

Providing and fixing C.P. Braas bibcock (straight line model) 15 mm dia with wall flange (Make: Model- FLR-5047N of Jaquar or equivalent)

Providing and fixing Overhead Shower 105mm Round Shape Single Flow with Air Effect (ABS Body & Face Plate Chrome Plated) with Rubit Cleaning System

Providing and fixing Shower Arm Casted 160mm Long Light Body Round Shape for Wall Mounted Showers with Flange.

Providing and fixing UPVC floor trap with 100mm inlet and 100mm outlet with PVC grating with frame. Providing and fixing UPVC floor trap with 100mm inlet and 100mm outlet with PVC grating with frame.

Frame size 50 x 125 mm

30 mm thick

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868)r dyed to required colour or shade, with necessary screws etc. complete : 125 mm

(a) 100X60X1.90 mm

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

(a) Two or more coats on new work

(a) Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. (a) 15 mm nominal outer dia Pipes

(b) 20 mm nominal outer dia Pipes

(a) 32 mm nominal outer dia Pipes

Providing and fixing brass full way spherical valve with lever wheel IS marked (Zoloto make) 25 mm nominal bore

Providing and fixing on wall face un-plasticised-Rigid PVC sewer pipes conforming to IS:13592 (6kg/sqcm) including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion single socketed pipes with all accessories as clamps, bend, door, horn bend,shoe, cowl etc. complete as directed : (a) 110 mm dia

(a) Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) :

Please Enable Macros to View BoQ information