801492/E8 ADDITION ALTERATION TO SMQS AT MP CAMP PHASE-II AT BANGALORE

Amount

SCH 'A' PART-I (B/R Works) Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thick above or below ground level all as directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises all as directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches etc complete and all as directed.

Demolition of dilapidated reinforced cement concrete cover slabs/kitchen slab/RCC tank of any description and in any position complete and all as directed.

Taking down cement plaster on brick or stone walls and ceiling including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons including granite slab in kitchen platform laid, bedded and pointed in any mortar etc all as directed.

M & L for Machine cut Kota stone slab flooring 20-25mm thick including 20mm thick screed bed in CM 1:4 with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

M&L for joint free non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 all as specified and directed.

All as per item No 9 hereinbefore but in verticle surfaces such as skirting/ dado including necessary raking out joints, cutting and waste of tiles over and including 10mm thick rendering in cement mortar 1:3 all as specified and directed.

M & L for Non-skid ceramic light coloured tiles of size 300mmx300mmx7-8mm thick in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 all as specified and directed.

M & L for granite (of any type) work (table rubbed and polished)in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20mm thick screed bed in cement mortar 1:4 all as specified and directed.

M&L for coloured glazed ceramic tiles in verticle surface for toilet and kitchen with designer pattern of size 450mmx300mmx7-8mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match as including necessary raking out joints, cutting and waste of tiles over and including 10mm thick backing coat in cement mortar 1:3 all as specified and directed.

M&L for Flush pointing to block squared rubble masonry, coursed or uncoursed in CM 1:4 all as specified and directed.

Removing building materials etc, (other than spoil payable under items 3028 to 3031 in Section -3 - Earthwork) to a distance of 1 km but n. exc 5 km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination all as specified and directed.

Taking up or down steel tubing 15mm bore and connection including cleaning for refixing or removal to store all as specified and directed.

Taking up or down steel tubing 20mm bore and connection including cleaning for refixing or removal to store all as specified and directed.

S&F in repairs Vitreous china wash down water closet pan (pedestal pattern), white, complete with trap, fixed to floor with fixing bolts and seat cover, including connection to drain (or out going pipe) and to flushing pipe, anti - syphonage pipe etc,including making good to floor complete all as specified and directed.

S&F in repairs plastic seat cover closed pedestal pattern with flat bottom and cover and MS chromium plated or aluminised hinging device all as specified and directed.(Note: Seat cover make should be same as of WC make)

Supply and fixing in repairs vitreous china squatting pan, Orissa pattern of size 580mmx440mm white with integral foot rests excluding flushing cistern and flush pipe including connection to drain(or out going pipe) and to flushing pipe, anti-syphonage pipes etc, including making good to floor complete all as specified and directed.

Supply only 10 ltrs capacity PVC flushing cistern, low level with chromium plated brass inlet and outlet connections including provision of PVC brackets,inlet ball valve float, flush pipe with bend 32mm dia of suitable length and making necessary connections to water supply pipe line complete all as specified and as directed .(Note: Make should be same as of WC make)

S&F vitreous china, white, angle back/corner wash hand basin flat back of size 400 x 400mm including pedestal with plug and porcelain stopper brackets all as specified and directed.

S&F in repairs brass chromium plated pillar taps with aerators(6 LPM), fancy type foam flow, screwed down high pressure screwed for iron pipes of 15 mm dia all as specified and directed.

S&F in repairs 15mm dia bib taps, cast copper alloy, fancy type, long body chromium plated with capstan head handle, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repairs 15mm dia 2 in-1 bib taps, cast copper alloy, long shank with flange, regular half turn with foam flow complete all as specified and directed.

S&F in repairs 15mm dia angle cock, fancy type, brass chromium plated, screwed down, high pressure with long shank and cup screwed both ends for iron pipes or for unions all as specified and directed.

S&F in repairs 300mm, ordinary MS rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repairs PVC connection 15mm dia with 2 Nos brass nuts and washers of length 450mm between ends complete all as specified and directed.

S&F Towel ring of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats(minimum weight 90gm) complete all as specified and directed.

S&F in repairs PVC(SWR) floor trap 75mm dia outlet, with grating including jointing with solvent cement complete all as specified and directed.

S&F in repairs stainless steel gratings with frame, 125mm dia with or without hole for waste pipe connection complete all as specified and directed.

S&F in repairs PVC waste Pipe 32mm dia, 750mm long, suitable for kitchen sink complete all as specified and directed.

S&F in repairs PVC (SWR) Pipe 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed with wall including necessary fixing cleats/clamps complete all as specified and directed.(Note: Height of building approx: 8.5m)

S&F in repairs PVC (SWR) Pipe 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed with wall including necessary fixing cleats/clamps complete all as specified and directed. (Note: Height of building approx: 8.5m)

S & F PVC (SWR) bends 110 mm dia in any radius complete all as specified and directed.

S & F PVC (SWR) bends 75 mm dia in any radius complete all as specified and directed.

S & F 110mm dia PVC (SWR) junction double (double T) equal or unequal with access door complete all as specified and directed.

S & F PVC (SWR) 'P' trap suitable for 110mm/100mm dia bore pipes complete all as specified and directed.

S & F PVC vent cowl 110mm dia bore complete all as specified and directed.

S & F PVC vent cowl 75mm dia bore complete all as specified and directed.

S & F 15mm dia CP health faucet with 1.00m long flexible pipe and wall hook complete all as specified and directed.

S & F in repairs 16mm bore(OD)CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls and ceiling complete all as specified.

S & F in repairs 20mm bore(OD)CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls and ceiling complete all as specified.

S & F in repairs Kitchen sinks with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to wall with all fixing arrangements of overall size 915x460mm and bowl size 410x330x160mm all as specified and directed.

S & F in repairs Kitchen plate rack made of stainless steel 0.80mm mm thick complete of size 75cmx60cm duly assembled and fixed to the wall with wall screws/fastners all as specified and directed.Make- Butterfly or equivalent as approved by GE

S & F readymade pully operated cloth drying system which includes 4 aluminium pipes channel assembly, locking system ropes and fitted matreial 7 feet long(4 pipe set) all as specified and directed.Make: Easy Dry or equivalent as approved by GE

Use and waste of Form work to suspended slab such as roof slab, down ward facia, chajja, floor slab and similar work, rough finished surfaces of concrete not exceeding 200 mm thick (Horizontal or sloping) all as specified and directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers, lintels, cantilevers, shelves including supports,overhangs,etc. also splays between floors and beams, etc. all as specified and directed.

M & L for RCC Type B1 1:2:4 (using 20 mm graded stone aggregate) as in slabs, supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves, and the like all as specified and directed.

M & L for precast cement concrete solid blocks or slabs 10 cm thick (with plain or interlocking joints as directed) in PCC 1:3.6, type C-1 and setting in cement mortar 1:6 complete all as specified and directed.

M & L for rendering 10mm thick in CM 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15mm thick in CM 1:6 on stone masonry surfaces or other than fair faces of brick work finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 10mm thick in CM 1:3 on concrete surfaces of ceiling with water proofing compound finished even and smooth without using extra cement complete all as specified and directed.

M & L for 18/19mm thick block board, grade 2 quality,interior grade, decorative type with decorative face veneer on one face, fixed with screws to timber frame work complete all as specified and directed.

M & L for second class hardwood plain fillets.square,rectangular or triangular in section, clean sawn, secured with nails or brads exceeding 6 but n.exc 13 sqcm, complete all as specified and directed.

S & F MS continuous (Piano) hinge bright finish or electro galvanised with width of flap 30mm (when open) complete all as specified and directed.

Supply only approved integral liquid water proofing compound all as specified and directed

M & L for 50mm thick Cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in floor or path all as specified and directed

Dismantling of structural steel work of any description including doors, gates, rolling shutters etc complete all as specified and as directed.

M & L for factory made steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brass screws and wooden/plastic cleats with CP bracket guard and railing 60cm long all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 sqm with shutters (without taking off shutters from the frame) of any description all as specified and directed.

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm with shutters (without taking off shutters from the frame) of any description all as specified and directed.

Taking down wooden/PVC shutters of any description exc 1 sqm but n exc 2 sqm all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 sqm each with wooden shutters (without taking off shutters from the frame) and refixing in the same opening including refixing builders hardware as required and renewal of unserviceable screws etc complete all as specified and directed.

Taking down wooden shutters of any description exc 1 Sqm and not exc 2 Sqm each and refixing in the same opening including refixing builders hardware as required and renewal of unserviceable screws etc complete all as specified and directed.

Cutting holes in brick/stone walls built in CM for inserting hold fast and making good dismantled portion in CM 1:3 or PCC 1:2:4 (type B1 ) using 20 mm graded aggregate¸ depth of embedded portion of hold fast exceeding half brick but not exceeding one brick all as specified and directed.

Cutting holes in stone walls built in CM exceeding half brick but not exceeding one brick for inserting outlet trap and making good dismantled portion in CM 1:3 or PCC 1:2:4 (type B1 ) using 20 mm graded aggregate all as specified and directed.

Cutting chases,pinning in, making good to facings where required in brick walls and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting exc 10 cm girth but not exc 20cm girth complete all as specified and directed.

S & F 2nd class hardwood Glazed and skeleton 35mm thick shutters for windows, ventilators, etc. provided with stiles and rails, open rebated and prepared to receive glass, gauze, etc. but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkats etc. complete all as specified and directed.

S & F 2nd class HW 35 mm thick factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part II), kiln seasoned and chemically pressure treated etc. complete all as specified and directed.

M & L for framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary,gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.310-O

M & L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with M.S. Square tube, edges painted to match with prelaminated sheet all as specified and directed.

M & L for Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelaminated PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

S & F 1st class hard small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours articles n exc 200 cu. cm each all as directed.

S & F 4mm thick sheet glass ordinary quality and glazing with wooden beads/oil putty in squares not exceeding 0.50 Sqm in each pane all as specified and directed.

S & F 4mm thick figured glass pin head type and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane all as specified and directed.

S & F Pressed steel frames for doors of size 105 X 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S & F Pressed steel frames for doors of size 125 X 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

M & L for cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) to filling the hollow portion of pressed stee lframes complete all as specified and directed

S & F in repairs gate and shutter, hooks and eyes 150mm size mild steel,wire, type-1 complete all as specified and directed.

S & F Butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 all as specified and directed.

S & F aluminium anodised 75mm long hasp and staple, safety type,brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F in repairs aluminium alloy anodised, sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolt and sliding bolts of extruded section all as specified and directed.

S & F aluminium powder anodized handles 75mm long all as specified and directed.

S & F aluminium powder coated, barrel tower bolt 150mm long of extruded section all as specified and directed.

S & F in repairs aluminium powder coated, barrel tower bolt 100mm long of extruded section all as specified and directed.

S & F in repairs 100mm long extruded aluminium handle fabricated type anodised all as specified and directed.

S & F 150mm long extruded aluminium handle fabricated type anodised all as specified and directed.

S & F in repairs floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor with 150mm overall length of cover plate including provision of vulcanised rubber piece all as specified and directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple all as specified and directed.

S & F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple all as specified and directed.

Removing by cutting/up rooting plant/tree under surface of wall/ceiling including making good the damage portion with cement mortar 1:3 or cement concrete 1:2:4, type B1 using 20mm graded aggregate complete all as directed .(Note: Height of building approx: 9.0m)

S & F wire netting of 20mm mesh, galvanised steel wire 1.23mm dia fixed with tinned tacks of wire staples all as specified and directed.

Raking out joints/ pointing to stone masonry or brick-work built in cement mortar in single detached joints for flashing, etc. all as specified and directed.

M & L for preparation of surface and applying three coats of white wash on newly plastered surfaces of ceiling all as specified and directed.

M & L for preparation of surface and applying one coat of white wash on old ceiling surfaces all as specified and directed.

M & L for complete removal of existing treatment, preparation of old surfaces and applying two coats of oil Bound emulsion distemper over a coat of wall primer over a coat of chalk whitening using rollers to match with the existing surface complete all as specified and as directed .

M & L for preparing the new surfaces of wall and applying two coats of oil bound distemper over a coat of chalk whitening all as specified and as directed.

M&L for preparation of old plastered surfaces of walls including cornices and applying two coats of cement base paint complete all as specified and as directed.

M & L for preparing old painted wooden surfaces and over 10 cm width or girth applying one coat of Synthetic enamel painting to wooden surfaces all as specified and directed.

M & L for preparing old painted steel surfaces over 10 cm width or girth and applying one coat of Synthetic enamel painting to steel surface all as specified and directed.

M & L for preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and directed.

M & L for preparing previously untreated wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of Synthetic enamel Paint over a coat of pink primer all as specified and directed.

M & L for TMT bars 8mm dia and over cut to length, bent to shape required, including bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Roughening surfaces of old concrete floors by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3 Kg/Sqm complete all as specified and as directed.

S & F in repairs 32mm waste coupling of PTMT (half or full threaded) for wash hand basin (Min wt.32mm-45 gms/40mm-60gms) all as specified and as directed.

S & F in repairs Harrison rails(curtain rod), mild steel, chromium plated with fixing brackets, stops, rollers etc.all as specified and as directed.

S & F in repairs towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/ plastic cleats.(Minimum weight 190gms) all as specified and as directed.

SCH 'A' PART-II (Internal Electrification) Taking down carefully copper/aluminium point wiring (light, fan,socket and Power) complete including fixure and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings, CFL fittings etc., removing materials for taking credit and making good disturbed surface of wall, floors, roof etc all as directed.

Taking down existing DBs with MCB/isolator any rating and of any capacity all as directed.

Taking down light fitting any rating /any size all as directed.

Taking down submain wiring of any size /description from wooden battens/PVC conduits from walls/floors/ceiling etc., complete and making good the disturbed area all as specified and as directed.

M & L for point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non metallic rigid medium grade PVC conduit with all accessories alongwith fixing arrangements in walls , roofs , floors etc., or fixed in walls and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor connected to common earth dolly providing suitable size mild steel terminal boxes concealed in wall with 3 mm thick hylum sheet top cover to accommodate switches, fan regulators, sockets, socket outlets, etc, all as specified and as directed for One light point controlled by one switch.

M & L for point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non metallic rigid medium grade PVC conduit with all accessories alongwith fixing arrangements in walls , roofs , floors etc., or fixed in walls and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor connected to common earth dolly providing suitable size mild steel terminal boxes concealed in wall with 3 mm thick hylum sheet top cover to accommodate switches, fan regulators, sockets, socket outlets, etc, all as specified and as directed for One fan / exhaust fan point controlled by one switch.

M & L for point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non metallic rigid medium grade PVC conduit with all accessories alongwith fixing arrangements in walls , roofs , floors etc., or fixed in walls and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor connected to common earth dolly providing suitable size mild steel terminal boxes concealed in wall with 3 mm thick hylum sheet top cover to accommodate switches, fan regulators, sockets, socket outlets, etc, all as specified and as directed for One 5 amps socket point on independent board.

M & L for point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non metallic rigid medium grade PVC conduit with all accessories alongwith fixing arrangements in walls , roofs , floors etc., or fixed in walls and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor connected to common earth dolly in the existing steel terminal box including providing suitable size mild steel terminal boxes concealed in walls with new 3 mm thick hylum sheet top cover to accommodate switches, fan regulators, sockets, socket outlets, etc, all as specified and as directed for One 5 amps socket point on the sameboard with other switches.

M & L for point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non metallic rigid medium grade PVC conduit with all accessories alongwith fixing arrangements in walls , roofs , floors etc., or fixed in walls and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor connected to common earth dolly including providing suitable size mild steel terminal boxes with 3 mm thick hylum sheet top cover fixing on wall surface to accommodate switches, fan regulators, sockets, socket outlets, etc, all as specified and as directed for One Bell / Buzzer point controlled by one push button on Independent board.

M & L for point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non metallic rigid medium grade PVC conduit with all accessories alongwith fixing arrangements in walls , roofs , floors etc., or fixed in walls and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor connected to common earth dolly including providing suitable size steel terminal boxes with 3 mm thick hylum sheet top cover to accommodate switches, fan regulators, sockets, socket outlets, etc, all as specified and as directed for One light point controlled by two way switch.

M & L for point wiring complete with 2.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non metallic rigid medium grade PVC conduit with all accessories alongwith fixing arrangements in walls , roofs , floors etc., or fixed in walls and including provision of 2.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor connected to common earth dolly including providing suitable size mild steel terminal boxes concealed in walls with 3 mm thick hylum sheet top cover or new PVC gang box fixing on wall surface to accommodate switches, fan regulators, sockets, socket outlets, etc, all as specified and as directed for One 15 amps socket point on independent board.

S & F Switch piano flush type single pole one way 5 Amps, 230 V complete all as specified.

S & F Switch piano flush type single pole Two way 5 Amps, 230 V complete all as specified.

S & F socket outlet 2 in 1 , 3 pin, 5 Amps, flush type, complete all as specified.

S & F Switch socket combination 5 pin, 15 Amps, flush type universal complete all as specified

S & F ceiling rose surface PVC / polycarbonate isolated body with three terminals all as specified and as directed.

S & F stepped type electronic fan regulator 5 step speed control for fans all as specified and as directed.

S & F Bell push 5 Amps, 230 V AC complete all as specified.

S&F Call bell 230 volts single pole A/C fancy type Ding Dong bell complete all as specified and directed

S&F LED Light fitting 1 x 20 W with luminious efficiency 120 lumen/watt, Surface mounted, industrial box type luminaire with CRCA body, pre-coated in white & pre-wired for LED tube, bipin holders, connector block etc., including 20W -1 No LED T8 tubular lamp with in built driver with all accessories and connecting up with 3 core 0.5sqmm copper wire between ceiling rose and fitting terminal complete all as specified and as directed Make : (i) Cat part No : DMLN1LT8-16 of Crompton Greaves Ltd for fitting or equivalent model in Bajaj/Havells/ Philips (ii) Cat part No : LTT8- 20 of Crompton Greaves Ltd for LED light or equivalent model in Bajaj/Havells/ Philips.

S&F LED Light fitting 1 x 8 W with luminious efficiency 120 lumen/watt,Surface mounted, industrial box type luminaire with CRCA body, pre-coated in white & pre-wired for LED tube, bipin holders, connector block etc., including 8W - 1 No LED T8 tubular lamp with in built driver with all accessories and connecting up with 3 core 0.5sqmm copper wire between ceiling rose and fitting terminal complete all as specified and as directed Make : (i) Cat part No : DMLN1 LT8 - 8 of Crompton Greaves Ltd for fitting or equivalent model in Bajaj/Havells/ Philips (ii) Cat part No : LTT8- 8 of Crompton Greaves Ltd for LED light or equivalent model in Bajaj/Havells/ Philips.

S&F sheet metal enclosure MCB DB SPN 8 ways double door type with suitable bus bar complete all as specified and directed

M&L for sub main wiring with four runs of single core PVC FRLS insulated cable with copper conductor multistranded 1100 volts grade 6.0 sqmm through and including with suitable size of PVC conduit and its accessories , surface/ ceiling along with fixing arrangement etc including two runs of 6 sqmm PVC insulated multistranded copper earth contuinuity conductor and connected to common earth dolly complete all as specified. Note: Four runs of FRLS cable,two runs of earth continuity conductor cable and one run of PVC conduit shall be measured as one length/running metre.

M&L for Earthing complete with galvanized steel earth plate electrode 600X600X6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5M below normal ground level connected to GI earth lead wire 4.0mmdia by means of nuts, bolts, check nuts and washer of GI steel and connecting to testing point including provision of test point and all as shown in electrical plate No. 3 of SSR Pt I. The work is inclusive of necessary earth work and PCC chamber in type CI (1:2:4) with 8 CTD bar reinforcement both ways at 140 mm bents to centre complete including taken out old earthing complete all as directed by Engr-in-Charge.

S & F ceiling fans of sweep 1200 mm ,230v, with all accessories , BEE 5 star rated complete. Make: Bajaj,crompton,Khaitan Havells ,Model: ES -50 / equivqlent.

S & F in repairs MCB Single pole 230 volts, 50 Hz, 6 to 32 Amps, 10KA rupturing capacity, complete all as specified and directed.

S & F in repairs MCB single pole and neutral 5 to 32 Amps 230 volts 10 KA rupturing capacity

SCH 'A' PART-III (EXTERNAL ELECTRIFICATION) Excavation in trenches n exc 1.5 mtr wide and n.exc 1.5 mtr in depth for foundation for poles, stay, laying cables etc and getting out in soft/loose soil complete all specified and as directed.

Excavation in trenches exc 1.5 mtr wide and n.exc 3.0 mtr in depth for foundation for poles, stay, laying cables etc and getting out in soft/loose soil complete all specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exeeding 25 cm in any type of soil all as directed.

Removing the excavated soil to a distance not exe 50 m and depositing where directed at a level n exe 1.5 m above the starting point all as direced.

Supply and spread dry river sand in trenches for cable cushioning on both top and bottom of cable including ramming all as specified and directed. Note :- For the purpose of payment the punned thickness only shall be measured

M&L for Plain cement concrete 1:2:4 type B2 using 40 mm graded stone aggregate as in foundations filling and mass concrate, bases of electric poles including necessary form work and finishing the exposed concrete surfaces of concrete even and fair complete all as specified and as directed by Engr-in-charge.

Supply and laying sub class B brick for cable protection, laid dry and flat adjacent to each other complete all as specified and directed.

S & F GI tubing light grade 50 mm dia for cable protection fixed along with steel tubular pole/RCC pole /laid under roads, crossings, culverts etc., including necessary clamp, nut, bolt, washers etc including taking down/up old unserviceable GI tubing complete all as directed at site.

M&L for Plain Cement Concrete 1:3:6 type C1 using 20 mm graded stone aggregate as in coping, bases of electric poles including necessary form work and finishing the exposed concrete surfaces of concrete even and fair complete all as specified and as directed by Engr-in-charge.

M&L for Cutting PCC / road 150mm thick for laying of LT UG cable and making good the disturbed surfaces with cement concrete 1:2:4, type B-1, using 20mm graded stone aggregate complete all as specified and directed.

Supply and errect steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws type 410 SP-31 (9.00metres long) including painting of poles with two coats of aluminium paint over a coat of red oxide primer on all exposed surfaces and black bituminous paint on embedded portion complete all as specified and as directed. Note : Necessary excavation and earth work, PCC foundation, coping etc., shall be measured and paid separately vide relevant items .

M&L for pole wiring drawn through 20 mm PVC conduit rigid pipe including copper wiring multistrand two runs of 1.5 sqmm and one run of 1.5 sqmm earth wire as earth dolly, wiring sintex box to light fitting and internal connections for light fittings complete all as specified and as directed..

Supply and laying XLPE Insulated, armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor, ISI marked with necessary termination lugs, glands etc all as specified and as directed of size 10sqmm, 4 core complete all as specified and as directed.

Supply and laying XLPE Insulated, armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor, ISI marked with necessary termination lugs, glands etc all as specified and as directed of size 16sqmm, 4 core complete all as specified and as directed.

Supply and laying XLPE Insulated, armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor, ISI marked with necessary termination lugs, glands etc all as specified and as directed of size 25sqmm, 4 core complete all as specified and as directed.

S & F MCB TPN 63 Amps rating, 'C' series , 10 KA breaking capacity, 415 V, 50 Hz AC supply including making all connections complete all as specified .

S & F Timmer panel with Analog time switch having current capacity 16 A, 3P module 240 volts with one changeover for controlling of street light fitting and inter connection of UG cable and testing operational complete all as specified and as directed.

Supply and fixing moulded PVC / SMC Junction boxes out door type, weather proof, of size 240 x 130 x 95 mm to be fixed at the bottom of street light pole 3ph RYB busbar 200 amps capacity complete with suitable clamp , nut, bolt, washers and suitable glands to accommodate 01 No MCB SP 5 Amps 10 KA, with suitable connectors for incoming and outgoing connections complete all as specified and directed.

Supply and fixing LED street light fitting 72 Watts, with powder coated pressure die cast aluminium housing and IP 66 protection , built-in control gear complete with anodised reflector, toughened heat resistant glass cover, LED 45 watts white colour lamp, connector block with all accessories pre wired including necessary electric connection all as specified and as directed. Note :- Cat No LSTP-72-CDLM of Crompton j or equivalent model in Havells/ Philips

Shanthi Construction

Sai Ram Builders

N RAJEGOWDA and CO

M/s M Munivenkatappa and Company

Gnani Builders