SUPPLY INSTALLATION COMMISSSIONING OF TOOLS/ EQUIPMENT /INSTRUMENTS ETC FOR LAB SETUP OF DIFFRENT VOCATIONAL INSTITUTIONS

Diesel Engine – CRDI - 4 strokefor Dismantling and Assembling with Swiveling Stand. Latest 4 Stroke 4 cylinder turbo charged CRDI Engine, 800-1600cc, in running condition, with ECM, BCM, and all sensors, wiring, fuel feed & cooling system & instrument cluster.

Disk brake in working condition with caliper assembly with all parts Exhibiting Brake disc, Caliper assembly, tandem master cylinder, brake hoses, oil bottle, pedal, etc.

Drum brake assembly in Working Condition Brake drum, tandem master cylinder, oil container, brake hose, brake pedal.

Cut section working model of automatic transmission Gear box Sectioned to show the internal mechanism of forward and reverse speeds.

Radiator cut section-cross flow Radiator with sectioned side tanks, radiator core.

Cut section working model of Single plate clutch assembly Single plate Clutch sectioned to show

Cut section of cross ply and radial tyres Actual cut section model of cross ply tyre along with Disc of car mounted on wooden stand.

Tyre pressure gauge with holding nipple Tyre pressure gauge with standard holding nipple

Vernier calliper 0-300 mm with least count 0.02mm

Different type of piston model 3 Different Types on board

Spanner, ring set of 12 6 to 32 mm. (metric)

Philips Screw Driver set of 5 pieces 100 mm to 300 mm

Fuel feed pump for Diesel Hand operated Plunger Type

Piston ring compressor Opening Capacity: 90-175 mm, Overall Length: 165 mm,

Piston Ring expander and remover. 4" Piston Ring expander and remover

Outside micrometer 0 to 25 mm

Automotive oil pump for dismantling and assembling. Any standard automotive oil pump

Valve Lifter Mechanical and Hydraulic Flat-Face Lifters

Carburetor – Solex, Solex for dismantling and assembling

Calliper inside with spring 15 cm

Callipers outside with spring 15 cm

Pliers combination 20 cm

Gasket Cutter 5-35 mm

Circlip pliers Expanding and contracting 15 cm

Dividers with spring 15 cm

Hammer Ball Peen 0.75 Kg

Hammer Mallet 24.5 cm long, 1.54 kg

Hammer Plastic 10" overall lngth plastic hammer

Feeler gauge 20 blades (metric) Metric Feeler Gauge contains 20 blades that cover the sizes from 0.05mm to 1.00mm.

Hydraulic jack HI-LIFT type 3 ton capacity

Two wheeler (refurbished) As per availability

Demonstration board of MPFI system With injectors, rail, inlet manifold, throttle body, distributor, ECU, purge valve, sensor, crank pulley, fuel tank module.

Work bench 250 x 120 x 60 cm with 4 vices 12cm Jaw

Torque wrenches set 5-35 Nm, 12-68 Nm & 50-225 Nm

Battery –charger Capable to charge batteries from 5AH – 150AH.

Spanners socket with speed handle, T-bar, ratchet and universal set of 28 pieces with box up to 32 mm

Spanner D.E. set of 12 pieces 6mm to 32mm

Steel tool box with lock and key (folding type) 400x200x150 mm

Allen Key set of 12 pieces 2mm to 14mm

Grease Gun Fill capacity: 0.5 l, Filling options:400 g grease cartridge, grease filler or bulk grease, Length:400 mm, width:165 mm.

Electric Soldering Iron 230 V 60 watts – 230 V 25 watts

Hacksaw frame adjustable 20-30 cm

Hammer ball peen with handle 0.5 kg

Electrician Screw Driver 250mm

Flat File , second cut 25 cm

File flat , bastard 20 cm

Hands file for Second cut flat 20 cm.

Spanner, adjustable 15cm

Scriber 15 cm

Digital compression testing machine Compression Testing Machine, Capacity 2000kN, Digital confirm IS – 14858 ( 2000) with NCCBM certified load gauge. With NABL/NCCBM certificate

Theodolite transit latest model with all accessaries Image Erect Length 178 mm Magnificaton 25X Effective Aperture 38mm Field of View 2.6 M at 100M Short Focus 1.5M Stadia Ratio 1:100 Stadia Constant 0 Resolving Power 4" Circle Diameter Hz113mm, V100 mm Graduation 10' Vernier Reading 10" Plate Level Sensitivity 45" / 2mm Vertical Circle Level 1' / 2mm With Stand, Plumb bob and Cover

Aggregate impact tester with cylindrical cup and measuring cylinder Aggregate Impact Test for determining the aggregate impact value and in accordance with test procedure as in 2386 part IV reaffirmed in 2011, IS:9377 - 1979. Along with supply of IS sieve (spec mentioned as in [BIS:460 Part I & II 1985, reaffirmed 2008]) size 12.5, 10 and 2.36 mm

Manual bar bending machine of suitable size Bar Dimensions: 920*920*1200 mm Max Bending Radius: 0-50 mm

Ranging rod Steel 2 m

Offset rod 2 m

Mason square 30x60 cm

Cube mould 150 mm size

Mason plumb rule with spirit level Size/Dimension: 5 Inch (Length); Length: 30 cm / 300 mm / 12 inch Type: Single Column Accuracy: 0.75 mm/m

Bar bending lever (suitable diameter and length) in m

Total station latest model with all accessaries Worldwide basemap 2.2" 65K color, sunlight-readable display 3-axis compass and barometric altimeter Wireless capability to share waypoints, routes and geocaches with other similar devices · GPS and GLONASS satellites for faster positioning Display size, WxH: 1.4" x 1.7" (3.5 x 4.4 cm); 2.2" diag (5.6 cm) or more Display resolution, WxH: 176 x 220 pixels Display type: transflective, 65-K color TFT Battery: High capacity NiMH or Lithium Battery life: 25 hours or more High-sensitivity receiver; USB Interface with Base Map; Built-in memory 1.7 GB or more, capabilities of accepting microSd Card Waypoints/favorites/locations: 2000 points, Having Photo navigation (navigate to geotagged photos) capabilities

DGPS-latest version Main: The GNSS system should have cutting edge technology with Receiver & Controller. The GNSS system should have separate Receiver and Controller. The Receiver should capable of track Multi Frequency Satellite (L1/L2/L5/MSS) Signals. Each Receiver should have connected with controller through Bluetooth. Each Receiver should have supports all global GNSS Systems Specification of Antenna SINGLE TRACKING :Should be enable ProPoint GNSS positioning technology for improved accuracy and productivity in challenging conditions- GPS: L1C/A, L2C, L5 GLONASS: L1C/A, L2C/A SBAS: L1C/A, L2C, L5 Galileo: E1, E5A BeiDou: B1, B2A QZSS: L1C/A, L2C, L5 NavIC (IRNSS): L5 No of Channel: 550 or more (Physical Channel or Dynamic Digital Channel be accepted) MODES OF SURVEY: Network RTK, Real Time Extension, Fast Static ACCURACY CODE DIFFERENTIAL (DGPS) GNSS POSITIONING HORIZONTAL: 0.3m+1ppm VERTICAL: 0.6m+1ppm NETWORK RTK HORIZONTAL: 10 mm + 0.5 ppm VERTICAL: 20 mm + 0.5 ppm REAL TIME EXTENSION (RTX) HORIZONTAL: 2 cm RMS VERTICAL: 5 cm RMS COMMUNICATIONS/ CONNECTIVITY :Bluetooth 4.2 or better USB power supply port Data Protocols: NTRIP, VRS, RTCM, CMRx, DCOL Position output: NMEA, DCOL through location service. BATTERY AND POWER : Battery should be capable to installed in External USB- A Power Consumption: Not more than 2.5 W WEIGHT: Not more than 400 gms. POSITIONING RATE: 10Hz OPERATIONAL TEMPURATURE: -20o C to +60o C STORAGE MPURATURE:- 40o C to +70o C DUST & WATER PROTECTION: IP 65 or better HUMIDITY : Upto 100%, non-condensing SHOCK PROOF : 1 m or more on to hard surface/concrete. SPECIFICATION FOR CONTROLLER TYPE : Scratch-resistant, touch-screen display, highly readable in both low light and glaring sunshine. OPERATING SYSTEM: Android 10 or better / Windows 10 or Better PROCESSOR: QUALCOMM Processor or Better WEIGHT: Not more than 1.0 Kg CAMERA & GPS: 13 MP or more resolution with autofocus and LED Flash Inbuilt GPS with Geo -tagging Facility. DISPLAY: 5 “ VGA Display LCD TFT, sunlight readable, back lite LED, GRAPHICAL DISPLAY: Controller should be capable of creating complete points, lines in the field which will be displayed KEYBOARD: Full QWERTY key pad Hard with Numeric keyboard for numbering & function short keys MEMORY: RAM 4 GB or more, Internal memory 64 GB or more, External through SD card BATTERY : More than 10-15 hours on operation condition on a single charge OPERATION: -30oC to +60oC or better STORAGE: -30 C to +70 C or better COMMUNICATION & FEATURE: Type C Port Integrated quad-band GSM/GPRS/EDGE Integrated Bluetooth integrated Wi-Fi 13 MP auto focus camera with dual white light LED flash, LED flashlight function Integrated compass with geo tagged images Integrated accelerometer SBAS support DUST & WATER PROTECTION : lP65 water proof and dust proof DROP: 1 m or better ACCESSORIES, HARDWARE AND SOFTWARE For BASE Receiver :1 Cable: 1 Rechargeable Battery with Charger:2 2m Carbon fiber Pole (Flat top for Thread less mount):1 ACCESSORIES, HARDWARE AND SOFTWARE For Rover Receiver :1 Cable: 1 Rechargeable Battery with Charger:2 2m Carbon fiber Pole (Flat top for Thread less mount):1 Field Software:1 Controller mount bracket:1

Concrete vibrator pin type & plate type

Conctete mixture,Drum Capacity: 500 L Power Source: Electric Automation Grade: Manual

Bulk density appratus (Cylindrical measure for fine aggregate and coarse aggregate)IS: 2386 (Part - III) -1963, IS: 10079-1982

Turbidity Test kit Turbidity Range: 0.00 to 9.99; 10.0 to 99.9; 100 to 1000 NTU Turbidity Resolution: 0.01; 0.1; 1 NTU Turbidity Accuracy: ±2% of reading plus 0.02 NTU Turbidity Repeatability: ±1% of reading or 0.02 NTU, whichever is greater

Power Cutter of suitable size Blade Size: 355 mm*25.4 mm No-Load Speed: 4800 rpm Max Cutting Depth: 120 mm

Standard IS San Garde: Fine Bulk Density: 1520 To 1680 kg/m3

Oven Temperature Range: 5°C above ambient to 250°C maximum Temperature Accuracy: + / – 2°C

Electronic balance 30 kg - 1 gram L.C

Bar bending table As per availability

Drill and bit set Item Dimension: 330mm x 232mm x 72mm

Water testing kit for ph value Range: 1-14 Number of Tests: 500

Thickness and length gauges (Elongation and Flakiness Index) Thickness Gauge Constructed from heavy gauge sheet steel with ISI Certification Mark, IS:2386 (Part 1):1963

Metric chain: consisting of a fixed number of straight links of galvanised mild steel wire 4 mm in thickness, the end of each link are bent into a loop and connected together by means of three circular shape rings. The joints of rings may open or welded preferably welded. The ends of the chain are provide with brass handles which is linked with the chain by swivel joints; length of the link is 200 mm, each meter is provided with with a circular brass ring and each five meter length is provide brass tallies of requisite shape. Each chain should be provided with 15 nos of M.S. arrows of 4 mm diameter bar and 40 cm height. Refer: IS: 1492-1970 - 30 m length

Engineer's chain Range: 20 Metre Finishing: Galvanized Material: Iron Color: Silver

Sieve for sand in adjustable stand As per BIS: 383 1970 Sieve Brass Frame with Sieves

Mortar board 2 mt x 2 mt .

IS Brass sieves - set 4.75mm,2.36mm,1.18mm,600micron, 300micron , 150 micron , 90 micron, 75,micron, 45 micron , pan and cover

Pipe vice to grip pipes up to 77 mm .

Drawing Board 1000 mm x 700 mm

Measuring Cylinder set of 100 ml , 500 ml,1000ml

Le Chatelier Mould ( for sound test of cement) 30 mm in diameter, with 30 mm height and 150 mm in length from a special alloy material is produced by combining the two branches. The The Le Chatelier Soundness Test Set should be supplied complete with Le Chatelier moulds 3 pcs. • 50x50 mm glass plates 6 pcs. • 300 gr Weights 1 pcs. • 100 gr Weight, 3 pcs. • Tamping Rod 17 mm dia. X 70 gr • Steel Ruler • Plastic Carrying Case

Stop watch,Time Display: Digital Material: ABS

Screw driver set,100 mm to 300 mm

Land measuring Steel tape,30 mt long

Brick hammer with handle,Material: Mild Steel Weight: 50 gm

Crow bar,30mm dia 1.5 m long of mild steel

Land measuring plastic tape,30 mt long

Shovel,1 m long, 20mm dia

Spade Iron

Telescopic pipes / props,Material: Steel Outer Diameter: 6 Inch Diameter: 7 mm Surface Type: Color Galvanized

Trowel 25 cm x 10 cm

Plumb rule and Bob 2 set

Non porous plate Standard size: 1000 mm* 500 mm, 600 mm * 600 mm

Hacksaw frame adjustable 250 to 300 mm

Level spirit wooden 300 mm

M.S. pan 45 cm dia

Bucket G.i. 35 cm dia

Spirit level,30 cm long

Gauging trowel ,Handle Material: Plastic Size/Dimension: 2" Material: Steel

Sampling Scoops 2 kg and 5 kg

Trowel 125,Material: Stainless steel Blade Material: Stainless steel 202 Size: 250 mm * 125 mm

Farma of mild steel for measuring aggregate-Heaving volume 0.03472 cm

Masonry grinder-Heaving volume 0.03472 cm

Cutter , pipe wheel type- 6 mm to 25 mm

Steel tape-5 mt long

Cutting pliers-Size: 8 Inch

pointing Trowel-6"

Steel float-Material: Stainless Steel, Mounting Type: Top Mount

Measuring tape - 15 mt . (steel)

Float wooden- Material: Wood Mounting Type: Top Mount

Chiesel- different suitable sizes

Plumb bob -50 gms

Bending pipes (suitable diametwer and length) -in m

Wire brushes- Bristle Length: 2 inch Brush Size: 15 inch

Motorised sieve shaker - Sieve Shaker, Motorised Having as tardy cast iron body, the shaker has an inclined sieve table which can accommodate a max of seven sieves of 200 mm dia. N adjustable top clamping plate is provided to hold the sieves. The table has agyratory motion in addition to up and down jolting action. The operating gear assembly is enclosed in an oil bath fitted with transparent oil level indicating window. Suitable for operating on 220v, 50Hz, single phase supply. Time Switch adjustable from 0-60 minutes. Lid and Receiver for 200 mm dia sieves, made of brass. Adopter for 300 mm dia sieves

Electric drilling machine- 6 to 35 mm by 0.2 mm for drilling

Power operated cutting machine - Power Consumption: Single Phase Cutting Blade Size: 10 Inch Machine Type: Semi -Automatic Air Pressure: 5-8 kg/cm2 Dimension (L*W*H): 2600 * 1600 * 1650 mm

Drums - 200 liters capacity

Polishing machine - Type: Scrubber Brush Diameter: 17 inch Power Source: Electric

Straight edge - Stainless steel

Hammer 1 kg- 1 kg.

Magnifying glass- Material : Glass Size/Diameter: 3 inch Handle Color: Sliver Handle Material: Metal

Chisel cold flat - 20 x 250 mm

File flat rough- 300 mm

Vicat apparatus with plunger, needles and mould Vicat Apparatus with ISI Certification Mark IS:5513

Tile cutter hand operated

Bar bending table As per availability

Plumbers metal melting pot 10 kg.

Tap and die set to cut BSP Thread Size: 1 mm to 100 mm Material : SS, MS Pack Type: Box

Survey plotting scale- 8 scales with offset scale in box

Le Chateliers flask (For specific gravity testof cement) Le Chatelier flasks(IS 5514 (1996)) with a 250 ml capacity and a graduated neck that can be used to determine the specific gravity of hydraulic cement, sand, and other fine materials. The neck should be graduated from 0 to 1 ml and from 18 to 24 ml in 0.1 ml subdivisions, with an additional 0.1 subdivision below the 0 and above the 1.0 ml mark. The flask should also have an oval bulb in the neck that holds 17 ml and a number 13 stopper.

Spanner monkey - up to 50 mm

Stilson wrench- 200 & 350 mm

Land measuring plastic tape - 30 mt long

Telescopic pipes / props Material: Steel Outer Diameter: 6 Inch Diameter: 7 mm Surface Type: Color Galvanized

Graduated cylinder- Material: Borosilicate

Adjustable spanner - A 375

Double face hammers - Material: Iron Handle: Wooden

Bolster- Filling material: Cotton Design/Pattern: Plain

Wooden mallet- 24.5 cm long, 1.54 kg

Plumbers ladle- Material Grade: SS 202 Size: 2"

Inside caliper - 150 mm

Auto level atest model with allaccessaries Leveling Accuracy: ±0.7mm Telescope Magnification: 32x; Minimum focus distance: 0.2m from end of telescope, 0.3m from instrument center Automatic Compensator Horizontal Angle Measurement Working range : 100m Angular Accuracy: 1° Field of View: 1° 30’ or 2.6ft@100ft Min. Focus Distance: < 1-ft Compensator range: +/-15’ Comp Setting: ±0.3”

Aggregate Crushing Value Apparatus Best Quality - Cylindrical Cell:120 mm internal dia x ,150 to 120 mm height,Plunger: 150 mm dia x 100 to 115 mm height, Best Quality - Cylindrical Cell: 120 mm internal dia x 150 to 120 mm height Plunger: 150 mm dia x 100 to 115 mm height Base Plate: 200 to 220 mm square x 7 mm thickness Tamping Rod: 15 mm dia x 450 to 600 mm length Metal Measure: 120 mm internal dia x 180 mm height

Dumpylevel Length: 215mm, Objective aperture: 32mm(1.26in. ), Magnification: 24X, Resolving power: 4", Image: Erect, Resolving Power: 4.0", Field of View: 1° 25' (2.5m/8.2ft. ), Minimum focusing distance: 0.2m (7.9in. ) from end of telescope 0.3m (1ft) from instrument center, Image: Erect, Reticle pattern: Cross line, Stadia constant:0, Stadia radio:100, Focusing knob:1-speed, Sight aid: Gun sight

Plane table with stand,accessories & water proofing cover Plane Table Board: 600 X 750 X 22 mm Plane Table Stand: Wooden/Teak wood/ Aluminium Magnetic Compass: 150 mm Brass Spirit Level: 150 mm Brass/ Aluminium Alidade/Sight Vane: ISI Specification Plumbing Fork: Aluminuim/Brass Plumb Bob : Steel / Brass Canvas Cover: Full

Mortar board- 2000x 2000

Telescopic alidade--Height: 5-6 inch Diameter of Lens: 3mm Length: Upto12 inch Visible Range: 1-4 Km

Thickness andlength gauges (E ongation and Flakiness Index) - Thickness Gauge Constructed from heavy gauge sheet steel with ISI Certification Mark, IS:2386 (Part 1):1963

Height indicators- Length: 10 feet Total Height: 10 feet

Metric chain- Metric chain: consisting of a fixed number of straight links of galvanised mild steel wire 4 mm in thickness, the end of each link are bent into a loop and connected together by means of three circular shape rings. The joints of rings may open or welded preferably welded. The ends of the chain are provide with brass handles which is linked with the chain by swivel joints; length of the link is 200 mm, each meter is provided with with a circular brass ring and each five meter length is provide brass tallies of requisite shape. Each chain should be provided with 15 nos of M.S. arrows of 4 mm diameter bar and 40 cm height. Refer: IS: 1492-1970 - 30 m length

Prismaticcompass with stand and allaccessaries - Size: 4"/6" diameter with telescopic aluminium folding stave; material: of stainless steel/gunmetal/nonmagnetic metal,Can be packed in a leather case with teak wood tripod stand .

Sievefor sand inadjustable stand l - As per BIS: 383 1970 Sieve Brass Frame with Sieves

Optical square-- Should be consists of brass/suitable metal hollow box having open face about 6 x 3 cm and closed about 2 x 3 cm and deep about 4 cm to 5cm. provided with a brass handle about 8 cm in length. Two mirrors fixed at an angle of 45 degrees to the inclined sides of the box.

Slump Cone- Material: Mild Steel Height: 300mm Slum Cone Top Dia: 100 mm

Brushes for painting--Size: 2 Inch Brush Head Shape: Flat

Leveling staff -5 meter 5 Section complete in full aluminum in best quality with water proof canvas cover.

Stopwatch-Time Display: Digital Material: ABS

Brick hammer with handle- Material: Mild Steel Weight: 50 gm

Farma of mildsteelfor measuring aggregate- Heaving volume 0.03472 cm

Steeltapes- 5 mt long

Plumb bob- 50gms.

Computingscales five hectares

Water tube- 6 m

Marking rope & thread - 15 m

Chick feeder linear Type Linear Equipment Use Feeding Colour White and Red Bird Type Chicken Material Plastic

Grower feeder round Bell /Round type, Red ,Capacity-8 nos

Layer feeder round Bell /Round type, Red ,Capacity-8 nos

Chick feeder round Capacity-20 birds,Manual,Circular

Chick drinker round shaped Capacity 1 Litre Automation Type Automatic Drinker Type Bell Colour Red

Grower drinker round shaped Bell type, Red ,Capacity-8 nos

Layer drinkler round shaped Bell type, Red ,Capacity-8 nos

Flame gun 2nos Length: 12inch Product Equipment Type: Flame Gun Material: MS

Screw gauge Real Instruments Aluminum Micrometer Screw Gauge SS 0-25mm, MM-02

Sphereometer material Stainless Steel Usage/Application Laboratory Product Shape Round Thickness 3mm

AI gun for 1.2 mm straws with volumetric system Volumetric poultry insemination gun. Multi-doses - for 1.2 mL poultry straws

Poultry 1.2 mL straw Ref. 005591 ø 4.1 x length 132 mm for poultry semen . Packaging and sales unit 3500

Poultry catching crate Capacity 50 kg Color Blue & Red Usage/Application Storage Shape Square Style Mesh

Vernier calliper Digital vernier calliper, Material -steel

Haugh meter Material POULTRY Usage/Application Laboratory Packaging Type Box Display Type Digital Brand Orka

Refrigerator Capacity 500 L Type Of Freezer Top Freezer Number Of Shelves 2 Power Source Electricity Voltage 220 V

Egg filler flat plasic and cardboard Egg Storage Capacity 30, 30 Capacity 100gm Size 310*300*51mm Material Virgin Usage/Application Poultry Farms

Nipple drinker Equipment Use Feeding/Drinking Usage/Application Poultry Type of Bird Chicken Direction 360 Degree Material PP

Cow Hand Brush Plastic

Ear Tag Applicator for Plastic Ear Tags Brand Chadha Model Name/Number ETA Size Standard Capacity 50 Color Red

Yellow Ear Tag Plastic Small, For Animal Farm Size 35x45mm Color Yellow Usage/Application Animal Farm Material Plastic Model Name/Number Ear Tag Small

Stainless Steel Vet Digital Ai Gun Model Name/Number Standard Usage/Application Veterinary Purpose Material Stainless Steel Color Black Feature Dgital AI Gun

Milking Machine No Of Buckets 1.0 Automation Grade Automatic Material Carbon Steel Productivity 1-10 cows/hour Finishing Mirror polishing

Electric Motor Fresh Grass Gear Drive Chaff Cutter Cutting Capacity 400-600 kg/hr Power 3 HP Power Source Electric Motor Machine Feed Fresh Grass Speed in rpm 1440 RPM

Hoof trimming set Country of Origin: Made in India Brand: CHAMUNDA Packaging Size: EACH PCS SINGLE

Milk Feeding bottle Equipment Use: Animal Feeding, Capacity-2 ltr, Plastic Color: White Brand: CJ Farms And Agritech

Milk measure Available Capacity,100,200,500ml & 1 Ltr 50 SET Usage/Application Dairy Brand Chadha Material SS 304 MOC 304 SS

Milk strainer Usage/Application For Milk Col or SilverMaterial Stainless Steel Size 12inch Handle Material Plastic

Mikking pail seamless,Capacity 10 L Material Stainless Steel Color Silver Usage/Application Milk Surface Finished Polished

Feed troley Load Capacity 100 Kg Material Mild Steel Usage/Application Industrial Type INDUSTRIAL FEEDING TROLLEY Color Any

Branding equipment set A to Z and (0-9) Manufacturer Name: DOTCOM PHARMA Material: Metal

Tattooing equipment set Country of Origin: Made in India Usage/Application: Professional Is It Portable: Portable

Bull holder Material: Stainless Steel Automation Grade: Semi-Automatic Size: 6 inches without chain

Bull leader Color: Black Automation Grade: Manual Finishing: Polished

Halter Country of Origin: Made in India Animal Breed: Cow Packaging Type: Poly

Artificial Insemination Crate Cum Travis Capacity 1 Cow Milk Extraction Applicable To Cow Automation Grade Manual Design Type Fixed Brand Patel Trunk

Mild Steel Cattle Mouth Gag Color: Silver And Blue Material: Mild Steel Automation Grade: Manual

Clinical Thermometer Type: Mercury Thermometer Accuracy: 100

I/V Infusion Set Capacity: 110 ml Drops Per Ml: 20 drop/ml Liquid Filter: 0.2 m

stethoscope Chestpiece Single Sided Diaphragm Single Piece Tunable Chest Piece Finish Black

Automatic vaccinator or vaccine gun for cattle Automation type: Automatic Country of Origin: Made in India

Weight Balance Capacity: 200 gm Readability:0.001 g (1 mg) Repeatability ( ± ): 0.001 g Linearity ( ± ): 0.002 g

Simple Microscope Monocular/ Binocular

Syringe and Needle( 2ml, 5 ml, 10 ml) Packaging material: LABELS Shelf life: 5 years Sterilization: Ethylene Oxide Sterilization

Trocar and canula Usage/Application : Animal Treatment Material : metal Size : Total Length is 4 inch. Diameter of tip is 0.80 MM to 2 MM. Product Type : Veterinary Grade : Surgical Grade Product

Wet and dry bulb thermometer Color: Yellow Height: 320mm Length: 80mm

Hygrometer Display: Digital Material Stuff: Plastic Temperature Range: 5 Degree C to +50 Degree C (20 Degree F to 120

Hatching Machine Cum Incubator,Capacity-1000 egg ,Automatic, Brand-MAGNUM,Fully automatic machine with 1 yr replacement guarantee and 3 yr service warranty Can hatch any type of bird eggs 90-95% hatching guaranteed,Voltage-220-250 V, Warranty-3 Year 1000 EGGS SETTER PLUS 500 HATCHER

Manual Poultry Vaccinator,Bird Type: Chicken,Material: Metal ,Weight: 100 GM

Brooder guard,Finishing Galvanized Usage/Application Brooding, Poultry Chick Guard Material Iron Packaging Type Roll Sheet Thickness 0.15 mm

Litter racker machine,Usage/Application: Poultry Farm Weight: 10KG

Stainless Steel Inst Castration Emasculator 19 Inch Imported,Usage/Application Castration Material Stainless Steel Size 19 Inches Automation Grade Manual Minimum Order Quantity 10 Piece

Sparyer,Brand: Shivam Pump Type: Battery operated sprayer Usage/Application: For spraying

Split A/C (inverter technology) 1.5 TR

Frost free refrigerator 200 Liters

Single door direct cool refrigerator, carrying with HFC and HC 185 Liters

Capacitor start induction motor 1 HP, 230 V

Auto Transformer starter 3 HP

Hand blower portable complete 1/10 HP

Puller 3 legged with flexible arm 300mm

Gas leak detector for halogen gas Dual-color LED indicator light with progressive and real time display, 35.5cm flexible stainless steel probe, Sensitivity adjustable, multi-level alarming indicated by LED display

Anemometer Digital type

D.O.L Starter 2 HP

Torque Wrench 300mm-12.7mm

Micrometer measuremnt outside 0 to 25mm

Star delta starter 2 HP

(Hollow) Punch hole for cutting gasket 4.7-16mm die

Electrical portable drill machine with chuck and key capacity 6.4mm

Tong tester (clamp on multi meter) 0-10-30 amps 0-500 v

Ring spanner set 6 -32 mm

Flaring tool set, single type for tube. 4.7mm to 16mm O.D

Voltmeter, AC/DC portable precision grade Digital Panel board type 0 to 500 volts

Multi meter digital type Input frequency range (AC voltage):40 Hz to 1 kHz, DC voltage measurement accuracy (50 mV DC):0.2% of range

Pipe cutter miniature for copper tube 3mm to 16mm DIA

L-Allen key set size 1.5mm to 6.4mm

Snip sheet metal straight nose 200 mm

Tap set with matching drills 3 mm to 16mm

Refrigerant cylinder 2.5 Kg

Wrench adjustable length 250mm

Pipe cutter with built in reamer and space cutter, for copper tube 3mm to 32mm

Pipe wrench size 50mm to 150mm

Evacuating and refrigerant charging station, consist of a) Rotary two stage vacuum pump and motor (with gas ballast and anti-such back) b) manifold with gauges and valves and capable of pulling vacuum up to 50 microns of Hg and with provision of connecting to a microns level vacuum gauge c) Graduated charging cylinder with provision for temperature correction and all necessary isolating valves (CAP. 2 kg. In lieu of (b)above and with accuracy of + / - g for charging hydrocarbons)

Grinding Machine 200mm,3000rpm,Double ended 1/2 HP

Swaging tool, punch type, set of size for tube. 4.7mm to 16mm O.D

Tachometer digital, multi range 0 r m p to 3000 r m p. Portable small size in leather case

Spirit level precision metallic 200mm

Dial thermometer remote control, armored capillary dial 75mm - 50C to +50 C

Decibel meter 30-100 db

Pipe /Tube bender lever type 3-16 mm

Ammeter, AC/DC portable precision grade Digital Panel board type 0 to 30 amp

Sling psychrometer mounted on aluminum back, scale -100 C to +1100 C

Cylinder 134 a 5 kg

Piercing Valve ¼ Inch

Tap set with matching drills V to 5/8"

Heating kit with infrared bulb (200 w capacity)

Capillary plug gauge 0.031. 0.035 inch, Weight: 0.1 kg, material: SS/plastic

T-Allen key set size 5/32" to 1/8"

Sensor thermometer (digital) -50 degree Celsius to 150 degree Celsius

Dry N2 cylinder 2 stage regulator or commercial N2 in cylinder with drier unit and 2 stage regulator & meter cube

Compressors testers for small hermetic compressors Fixed with electrical input/ output indicating facilities

Anthropometric Rod

Skinfold Calipar

Induction cooking store for cooking demonstration.

Weighing machine

Models of skeletal system and charts showing human skeleton

Salter scale

Infantometer

Fibre glass tape

Sphygmomanometer and stethoscope

First aid box

Shakir tape

Charts showing factors affecting public health, standard size

Dressing demonstration first aid kit

Reference CT &BT chart,standard size

Capillary tube and pricking needle

Charts and model importance of cardio-pulmonary resuscitation,standard size

Charts and models and video presentation of degrees of burn or scald injuries, standard size

Charts and models of different types of fractures and joint dislocations,standard size .

Charts and models showing major blood vessels of human body and their functions,standard size .

Chart showing mechanism of blood coagulation process,standard size .

Charts showing concept of immunization,standard size .

Charts, models and bandages of the use of bandages and first aid treatment for any kind of dislocation of neck, spine, shoulder, wrist, knee, and ankles,standard size .

Charts and immunization schedules,standard size.

Dressing in primary first aid Chart

special types of injuries like injuries caused by crushing, foreign body penetration, electrocution through pictures or charts or models

Growth Chart,standard size .

Nutritive Values of Indian Foods book by C. Gopalan and digital Calculator

Charts and model pose,standard size .

Charts and models of instruments used to remove the object from string injury,standard size .

charts of sick room,standard size .

Mixer cum grinder- Motor of 550W, 250 V, stainless steel blade, 3 jar, 1.5 litre

Wooden Panel board with following accessories: Contactor – 4 pole, 250V coil, ON/OFF push button switch.

Electric Power Drill – Drilling Dia: Max 10mm, 220-230VAC, 50-60Hz, Drill rotational speed (n0)=2600/min, 500W, 2.3Amp.

Multimeter-4 & ½ digit LCD display, 0-20Mohm, 0-750V AC, 0-750V DC, 0-10A. Transistor & Capacitor checking facility.

¼ HP Induction motor Single Phase- ¼ HP, 230 V

TPIC with Neutral main switch – Iron clad, triple pole with neutral, 415V, 10A

Hand Drill Machine Electric with Hammer Action- 13mm

Steam iron automatic-Automatic and automatic with steam

Electric rice cooker- 2 litre capacity, 250V

Adjustable wrench- 4",6" and 8"

Screw driver set-Taparia set

Wooden Board for wiring –4’ X 7’

DPIC main switch – Iron clad, double pole, 250V, 10A

Cable cutting pliers- 6”

Adjustable wrench – 4",6" and 8"

Insulated Combination Plier (Heavy Duty ) - 8”

Electric bell- 220V House hold portable electric bell

Distribution box 4-way- 10A, 250V PVC

Soldering Iron Changeable bits- 15-Watt,240Volt

Ball Pin Hammer – 500 gm

Spirit level - Horizontal mounting type

Fuse – b) HRC type – 250V, 10A

Fan regulator

Continuity tester

Fuse – a) Kit Kat type – 250V, 10A

Standard wire gauge

S.P. switch flush type two way- 6A, 250V

3-pin 6A wall socket ,mounting type- 6A, 250V

Brass pendent-holder- 6A, 250V

PVC Cu wire – 1.5/2.5 sqmm (in m of length)

PVC Channel- 20mm& 25mm (in m each)

PVC pipe coupling- 19mm & 25mm

PVCjunctionbox-1,2,3and4 way--19mm & 25mm

PVC bend- 19mm & 25mm

PVC Elbow

PVC Tee- 19mm & 25mm

Washing machine- semi-automatic

AC Motor Trainer Kit-0.5 HP Single Phase AC motor, Contactor, Relay, MCB, DOL Starter for motor.

Soldering & De-soldering Station-25W, 250V

Megger – a) 1000V (100/250 Mohm)

Geyser- 1000W, 250V, Power indicator, wall mounted

½ HP Induction motor Three Phase-½ hp, 400 V

Clamp On Meter:Clip On (Digital- minimum 3 and 1/2 digit) type Meter Suitable for measurement of (i)AC/DC Current 5/10/50/100Amp, (ii) Voltage:600VAC/500VDC, (iii) Resistance: 0-10MOhms.

Vacuum cleaner-Portable and industry model

Single phase Energy meter – Electromagnetic type, single phase, 230V, 5A

Sodium vapour lamp-with complete set and fixture

Mercury vapour lamp-80W /125W with complete set and fixture

DOL starter-1 Hp, 230V single phase

M.C.B – a) Triple pole, 10A, 415V

Bench Vice-Bench Vice- 125mm

Insulated Combination Plier (Heavy Duty ) –8”

Spanner set-Taparia set -8pc; 6X7 to 20/22 mm

Analog multi-meter-AC/DC 0-750V, 20 Mohm, 10A

DOL starter-½ hp, 415V

Cutting pliers – 8”

Tools maker vice-50mm(clamp)

Soldering iron – 230 V, 30 W

Crimping tool(pliers)-7in 1

Ring Spanner – 8 mm, 10 mm, 12 mm, 14 mm

Screw driver set- Set of 7

Precision set of screwdrivers -T5,T6,T7

M.C.B – b) Single pole, 5A, 250V

Hacksaw frame adjustable-300mm

De-soldering pump electricalheated, manual operators-230V,40W

Insulated combination pliers-150mm

Insulated side cutting pliers-150mm

Insulated screw driver-4mm x 150mm

Earthing rod with chain, Fish Wire

File flat second cut-200mm

File flat bastard-200mm

Handsaw 450mm-Hand Saw- 450mm

3-pin 16A wall socket, flushtype-16A 250V

Plier-Flat Nose-150mm

File flat smooth-200mm

3-pin 16A wall socket, mounting type-16A 250V

Ceiling rose 6A, 250V 2plate-6A, 250V

Chisel-Cold-Flat-10mmX150 mm

3-pin 6A wall socket, flushtype-6A 250V

Combined LED or fluorescent tube

I.C.T.P. switch16A400V-16A, 250V

S.P. switch 6A, 250 V mounting type two-way-6A, 250V

2-pin 6A wall socket, flushtype-6A, 250V

I.C. cut out 16A, 250V-16A, 250V

Intermediate switch 6A, 250V-6A, 250V

2-pin 6Amounting type-6A, 250V

3-pin16A250Vplug-16A, 250V

Bell-Push/switch 6A,250Vmountingtype-6A, 250V

HRC Fuse-16A-16A, 250V

Terminal plate 16A 250 V3-way - 16A, 250V

GI junctionbox-1,2,3&4way square type-19mm & 25mm

Bakelite pendent-holder-6A, 250V

Toggle switch 6A-6A, 250V

Neutral link 16amps-16A, 250V

GI conduit pipe-19mm and25 mm (in length m)

GI conduit coupler & Inspection Coupler-19mm & 25mm

GI Elbow & Inspection Elbow-19mm & 25mm

Tees & Inspection Tee-19mm & 25mm

PVC Casing for wiring –set of 3/4" ,1" in m

PVC conduit pipe-19mm and 25 mm (in length m)

Please Enable Macros to View BoQ information