8349 ADDITION ALTERATION TO P177 WATER TOWER BUILDING LOCAL WORKUP TEAM AT ND MB ADDITION ALTERATION TO FIRE HYDRANT AND PIPE LINE IN INS ANGRE PROVISION OF AUTO FIRE DETECTION SYSTEM AFDS IN P1 BUILDING AT NAVAL DOCKYARD MUMBAI AND CERTAIN REVENUE W

Amount

Taking down chowkats or frame with shutter (without taking off shutter from frame), n exc 1.5 sqm each complete all as specified and as directed.

Taking down chowkats or frame with shutter (without taking off shutter from frame), exc 1.5 sqm but nexc. 4 Sqm each complete all as specified and as directed.

Taking down cement plaster on brick / surfaces built in cement mortor including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.

Dismantling 100 / 75 mm bore, cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches if required complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortat bedding but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ any thickness, including cover fillets complete all as specified and as directed.

Demolition of brick work or stone /boulder masonry built in cement mortar, including all quoins, arches, pillars, etc complete all as specified and as directed.

Demolition of plain cement concrete of any description and in any position and remove outside from MD land complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius and built in CM (1:6) complete all as specified and as directed.

M&L for Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in CM 1:4 complete all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finishing the surface even and smooth finish complete all as specified and as directed.

M&L for rendering 5 mm thick in CM 1:3 on fair faces of brick work or concrete surfaces in ceiling finishing the surface even and smooth finish complete all as specified and as directed.

M&L for water proofing plaster for sunken portion in CM 1:3, 15 mm thick in two coats using Pidiproof LW+ water proofing chemical of Dr. Fixit or equvalent as per manufacturer's instruction and finishing the surface even and smooth without using extra cement complete all as specified and as directed. (Water Proofing Chemical shall be measured and paid separately)

M&L for water proofing treatment of sunken floor/wall surfaces by applying two coats of water proofing chemical and cement mix in ratio 1:1.5, (PIDICRETE UPR or equivalent approved water proofing chemicals), complete all as per manufacture's instructions and as directed. Make : Dr. FIXIT, Chemisol, Choksy Chemicals.

M&L for PCC 1:7:12 type F2 using 40 mm graded stone aggregate as in filling (sunken portion). etc. complete all as specified and as directed.

M&L for 40mm thick PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate, using Pidiproof LW+ water proofing chemical of Dr. Fixit or equvalent as per manufacturer's instruction , as sub floor complete all as specified and as directed. (Water Proofing Chemical shall be measured and paid separately)

Supply only integral water proofing compound complete all as specified and as directed.

Supply only Water proofing chemical Pidiproof LW+ of Dr. Fixit or equivalent.

S&F 15 mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors including taking down 15 mm bore, old tubing and connections complete all as specified and as directed.

All as per Srl item No 20 here in before but 20mm dia medium GI Pipe.

S&F 50mm, low density polyethylene pipes (LDPE) of pressure rating 6 kgf/Sqcm fixed complete to walls, ceilings or in floors etc in repairs complete all as specified and as directed.

S&F 110mm dia PVC (SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls or laid in flloors/trenches complete all as specified and as directed.

S&F 75mm dia PVC (SWR) grade pipes single socketed in any length with rubber ring joints fixed to walls or laid in flloors/trenches complete all as specified and as directed.

S&F 110mm dia PVC (SWR) grade single T with access doors including fixing clips complete all as specified and as directed.

All as per Srl item No 25 here in before but 75mm dia

S&F 110mm dia PVC (SWR) grade branch piece, single (single Y) equal or unequal including fixing clips complete all as specified and as directed.

All as per Srl item No 27 here in before but 75mm dia

S&F 110mm dia PVC (SWR) grade branch piece, double (double Y) equal or unequal including fixing clips complete all as specified and as directed.

All as per Srl item No 29 here in before but 75mm dia

M&L in repairs PVC SWR floor trap 75mm, plain with grating including setting and jointing with solvent cement complete all as specified and as directed.

S&F in repair white vitreous china washed down water closet pan, (pedestal pattern), white, with and including P/S Trap, PVC solid type seat cover etc, complete all as specified and as directed.

S&F in repairs vitreous china urinals, Half stall type, white with grating and union for discharge pipe, complete incl. providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, fixing of flush pipe, grating and discharge pipe complete all as specified and as directed.

S&F in repair 10 litres capacity PVC low level flushing cistern of approved make including ball valve, syphon set, inlet and outlet pipe complete all as specified and as directed.

S&F in repair white glazed earthen ware vitreous china wash hand basin of size 550 x 400 mm with and including CI brackets, 32mm bore brass CP waste coupling Inlet/ outlet PVC flexible pipe etc. complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete

S&F in repair 15 mm dia fancy type pillar tap cast copper alloy with capston heads chromium plated screwed down high pressure with or without hot or cold with long screws shanks and fly nuts screwed for iron pipes complete.

S&F in repair chromium plated, tubular towel rail 20mm dia, D type, 60 cm long between flange complete all as specified and as directed.

S&F in repair PVC Connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S&F in repair brass chromium plated shower rose 125mm size complete all as specified and as directed.

S&F in repair 15 mm bore dia of pipe, brass chromium plated fancy type bib tap complete all as specified and as directed.

S&F in repairs 15mm size Stop Valves fancy type chromium plated screwed down high pressure with crutch or butterfly handle handle screwed both ends complete all as specified and as directed.

S&F in repair Vitreous china water closet pan of size 380x725x690 mm, Rimless Single Piece WC with UF soft close slim seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern Fittings, complete with and including all accessories & S Trap - 300 mm complete all as specified and as directed. (Make - Jaquar CAT Part No. - ONS-WHT-10853S300UFSM or equivalent as approved by GE)

S&F in repair Vitreous Wall Hung Basin, of size 560x430x195mm complete with and including all accessories complete all as specified and as directed. (Make - Jaquar CAT Part No. - CNS-WHT-811 or equivalent as approved by GE)

S&F in repairs CP towel rail 600 mm long with round flange all as specified and directed. (Make - Jaquar CAT Part No. - ACN-1111SM or equivalent as approved by GE)

S&F in CP toilet roll holder with flap all as specified and directed. (Make - Jaquar CAT Part No.-ACN-1153S or equivalent as approved by GE)

S&F in repairs CP towel ring square with round flange all as specified and directed. (Make - Jaquar CAT Part No. -ACN-1121N or equivalent as approved by GE)

S&F in repair soap dish complete all as specified and directed. (Make - Jaquar CAT Part No. -ACN-1131N or equivalent as approved by GE)

S&F health faucet ABS Body with 8 mm dia 1 mtr flexible tube and wall hook (Make - Jaquar CAT Part No.-ALD-565 or equivalent as approved by GE)

S&F in repair two way bib cock with wall flange complete all as specified and directed. (Make - Jaquar CAT Part No. -QQP-7041PM or equivalent as approved by GE)

S&F in repair angular stop cock icomplete all as specified and directed. (Make - Jaquar CAT Part No. -QQP-7053PM or equivalent as approved by GE)

S&F in repair Braided hoses 450mm long with two 15mm Nuts & Rubber Washers Without Nipple (Suitable for Geysers)complete all as specified and directed. (Make - Jaquar CAT Part No. -ALD-805B or equivalent as approved by GE)

S&F in repair pillar cock Chrome Plated complete all as specified and directed. (Make - Jaquar CAT Part No. -ALI-85001 or equivalent as approved by GE)

S&F in repair bib cock (make - Jaquar or equivalent as approved)

M&L 75mm thick, PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed.

M&L cement concrete 1:2:4 type B-1 (20mm graded stone aggregate) 40mm thick as in flooring & finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for Coloured glazed ceramic tiles in vertical surface 450 X300X7mm thick, set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles with and including 10 mm thick backing coat in CM 1:3 complete all as specified and as directed.

M&L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for Extra over granite stone slabs for edge polishing / chamfering / noising / grooves / bevelling etc complete all as specified and directed.

S&F 12mm thick toughened glass for partition with and including drilling holes, edges polishing, fixing arrangement etc complete all as specified and as directed.

S&F false ceiling with powder coated exposed GI grid suspension system (E-Grid T-2430 or equvalent load carrying capacity with mid span deflection not exc. 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long, cross Tee 1200mm/600mm long and wall angle. The main runners to be placed @ 1200mm, the cross Tee 1200mm will be inserted in the pre cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200mmX600mm. Additional cross Tees of 600mm shall be placed perpendicular to the cross tee 1200mm long to finally form a grid of 600mmX600mm. Grid of modular size 600mmX600mm shall be supported by 4 mm dia G.I. wire from purlins/soffit with and including 4mm thick high pressure steam cured non asbestos fiber cement designer ceiling board (Density>1200Kg/Cum) of size 595mmX595mm, confirming IS 14862 & Type B Category III of ISO 8336, tested as per AS 1530 part 3 & BS-476 Part 4, 5, 6, 7 & 8, complete all as per manufacturer's instruction complete all as specified and as directed. (Make : Everest or equvalent as approved by GE)

S&F plain, solid, straight chowkats / frames 2nd class HW wrought, framed rebated on the solid, rounded chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F plain framed factory made panelled shutter 35mm thick 2nd class HW rail and style(two panel) with lock raid and panel of 2mm BWP commercial ply or 12mm vencered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003(part I), Kiln seasoned and chemically preasure treated complete all as specified and as directed.

S&F flush shutter 35 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F powder coated aluminium frame / shutters for partition, doors, windows, ventilators etc. including joining cleat for fixing, PVC rollers, locking arrangement, rubber beading, rubber gasket, screws, handles, hinges, tower bolts etc. complete all as specified. Make: JINDAL/HINDALCO/INDALCO. Note :- (i) Glazing and wire mesh shall be measured and paid separetely for supply only as the labour element included in this item. (ii) Item shall be paid as per weight of aluminium section. (iii) the rete quoted shall be inclusive of the cost of neoprene beading, glazing pin. screws and powder coated fittings such as hinges, handles, locking arrangement etc as required, which shall not be measured for arriving the weight. (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing surface area.

M&L for aluminium anodized grill with suitable anodized aluminium frame of F/H section with suitable fixing screws/attachment etc complete all as per M/S Deco Grill Design No DG -102 , 7.5mm size grill all as per manufacturer's specifications complete all as specified and as directed.

S&F framed work such as grills, gratings etc with ends of bar shouldered and/or riveted or forged into pikes, framed guard bars etc confirming to Fe-290, Gde -E-165 complete all as specified and as directed.

S&F 4 mm thick bakelite sheet with decorative choice laminated on both side complete all as specified and as directed.

S&F 12 mm thick Pre-laminated interior grade both sides laminated, fixed to timber/ Aluminium frame work with screws complete all as specified and as directed.

S&F 4 mm thick figured glass, pin headed type, in squares n exc 0.5 Sqm in each pan complete all as specified and as directed.

S&F sun control film, 50 micron non reflective type,sticked to glass as per manufacturers instructions complete all as specified and as directed. ( Make - Garware or equivalent as approved by GE).

S&F aluminium (Die cast) body, door closer, hydraulically regulated, desig. No. 3, unversal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed.

S&F Aluminium anodised sliding door bolt 300 mm long, with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F Stainless Steel but hinges 100mm size complete all as specified and as directed.

S&F aluminium anodised Barrel tower bolts of extruded section, length of bolt 200mm complete all as specified and as directed.

S&F Extruded aluminium anodised alloy handles, fabricated type 150mm size complete all as specified and as directed.

S&F SS 202 Stain finish Handle D type, 25mm dia 600mm long for glass shutter complete all as specified and as directed.

S&F bottom / top patch fitting for pivot complete all as specified and as directed.

S&F bottom lock patch fitting complete all as specified and as directed.

M&L for double action floor spring hydraulically regulated made up of minium 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as per manufacturer's instruction complete all as specified and as directed.

S&F 3 mm thick Aluminium composite panel cladding plain of approved colour/ shade to beam/ column/ slab in circular/ rectangular shape including cutting, notching, bending to shape as required jointing with silicon gel of approved colour & Aluminum tubular hallow section 25 x 25 mm not exceeding 900 mm c/c on exceeding col/beam/ slab to hold APC cladding etc. complete all as specified and as directed. (Note:- Colour/ Pattern of ACP sheet shall be given by GE)

S&F in repairs Roller blinds made out of standard cloth of approved texture with necessary accessories etc. complete all as specified and as directed.

M&L preparation of new wooden surfaces of any description, over 10 cm in width or girth, applying two coats synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall & ceiling applying two coats of oil emlusion distemper over a coat wall care putty of 3mm thick and alkali primer complete all as specified and as directed.

M&L for complete removal of existing treatment on wall surfaces and applying one coat of Birla/JK white wall care putty, sanding the surfaces till even and smooth finish and applying one coat of wall primer and finally applying two coats of oil bound distemper of approval tint complete all as specified and as directed.

Taking down carefully old U/S point wiring copper/Aluminum (light/ fan / sockets/ power) complete with switches, sockets, fan regulators, ceiling roses, lamp holders, brackets, removing material to store for keeping in safe custody and making good to disturbed surfaces complete all as specified and as directed.

M&L for point wiring complete with proper colour coding using PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm size, 1100 volts (ISI marked), FRLS grade drawn through & including non metalic rigid, PVC non metallic Conduit, ISI marked, not less than 25mm dia with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 1.5sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including PVC modular box with cover plate complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Gloster / Plaza (c) Switch socket measured & paid separately.

(i) One light point controlled by one 5A switch

(ii) One Fan / Exhaust fan point controlled by one 5A switch

(iii) One 5A flush type switch socket point on same board board

(iv)One 5A flush type switch socket point on independent board

M&L for point wiring complete with proper colour coding using PVC insulated unsheathed multistranded copper conductor cable 4.0 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 4.0sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including PVC modular box with cover plate complete comprising of 03 Nos 6A sockets and 01 No 15A socket on board complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red/Blue/Yellow (ii) Neutral - Black (iii) Earth - green (b) Switch socket measured & paid separately. (c) Make of wire : Polycabl/Plaza/Havells/Gloster (d) Caping casing make : Asian/madi/Precision/National

S & F modular switch 1 way 6A, 1 module all as specified and directed. Make: Anchor/Roma/Legrand/Glodmodal.

S & F modular socket, 6A - 2/3 pin combined 2 modules all as specified and directed. Make: Anchor/Roma/Legrand/Glodmodal.

S & F modular switch 1 way 16A,1 module all as specified and directed. Make: Anchor/Roma/Legrand/Glodmodal.

S & F modular switch socket 6/16A,2/3 pin, combined 2 module all as specified and directed. Make: Anchor/Roma/Legrand/Glodmodal.

S&F for modular fan step regulator, 120W - 2 modular all as specified and directed. Make: Anchor/Roma/Legrand/Glodmodal.

S & F Ceiling rose, PVC/polycarbonate insulated body type, 3 terminal, 240 volts, 5 Amps all as specified and directed. Make: Anchor/Roma/Legrand/Glodmodal.

S & F in replacement 20 Amps Single pole and neutral enclosure with a Two Pin and earth plug and socket complete with one single pole MCB and making connections complete all as directed. Make -Legrand Cat Part No. 5078 14 or equivalent in Siemens /GE/ C&S

S & F in repirs LED light fitting 20W, 230 V, 4 feet surface monted, indoor decorative aluminium extruded T- 5 LED batten, integrated type etc., complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round block-02 Nos including connecting up with twin core twisted flexible copper conductor cable with suitable size and all as directed. Make- C & S cat part No. LTTB4F20WLED/W (Nakshatra series) or equivalent cat part in Crompton/Wipro /Philips

S &F in repair Ultra slim edge lit type recess mounting LED 2X2 Luminaire 36 watt and extruded aluminium housing with anti-glare diffuser provides high quality ecomonic energy saving lighting LED Luminaire suitable for 600 x 600 mm modular/ POP/ Gypsum ceiling complete all as specified and as directed. Make: Crompton cat No LCPL-36-CDL(2X2) / C&S cat No LTCRSLM36WATT2X2 or equivalent Cat part in Surya / Philips / Bajaj

S & F in replacement of MCB 6 to 32 Amps capacity, C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as directed. Make - Legrand cat No 4085 87-95 or equivalent in Siemens /GE/ C&S

S & F in replacement of MCB, SPN 40 to 63 Amps capacity, C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as directed. Make - Legrand cat No 4086 18-20 or equivalent in Siemens /GE/ C&S

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 54 & IK 09 protection surface mounting SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make - Legrand cat No 5076 41 or equivalent in Siemens /GE/ C&S

M&L for sub-main wiring with 2 runs of 4.0 sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade non metallic PVC conduit not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 4.0 sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unservucable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed.

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6.0 sqmm 2 core. laid in duct / along pole/wall etc including making connection including taking down old unsv XLPE cable of any size complete and making good the distrubed surface matching with existing surface complete all as directed. Note : 1. The cost of Al thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.

S & F exhaust fan of sweep 300 mm heavy duty type complete with self closing MS louvers, mounted in suitable opening arrangement and suitable for operation on 230 Volts single phase 50 Hz AC supply and connectin up with and including two core PVC insulated, PVC sheathed copper conductor flexible cable 24/ 0.2 mm including fixing and making connection and fixed by using 4 Nos 200 mm long 12 mm dia bolts, nuts and washers and grouted in wall in CM 1:3 completed all as specified and directed. Make: Havells/CG/ khaitan

S & F Ceiling fan 5 Star, Rated 1200 mm sweep heavy duty type complete with and suitable for operation on 230 Volts single phase 50 Hz AC supply and connectin up with and including two core PVC insulated, PVC sheathed copper conductor flexible cable 24/ 0.2 mm including fixing and making connection and fixed by completed all as specified and directed. Make: Havells/CG/ khaitan

Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level connected and incl galvanised earth lead wire 4.0mm dia by means of nuts & bolts, check nuts and wassher of galvinsed incl PCC (1:2:4) type B-1 cover reinforced with XPM (weight not less than 4 kg/sqm) and frame of angle iron 25mm x 25mm x 3mm excavation and earth work in any type of soil, charcoal dust, salt light grade GI watering pipe 20mm dia with funnel and wire-mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distrubution board complete all to as shown in electrical plate No 3 of MES sch 2009 (part-I) connected main switch board all as specified and testing on completion .

Excavation in trenches nexc 1.5 mtr wide and n exc 1.5 mtr in depth and getting out in hard/ dense soil for laying pipes, erection of poles complete all as specified.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/ dense soil complete all as specified.

Removing surplus excavated soil nexc 50 mtr and depositing where directed at a level n-exc 1.5 mtr above the starting point.

M&L cement concrete in 1:2:4 type B1 using 20mm grade stone aggregatefor road cutting surfaced and fair and even finishing without using any extra cement etc complete all as specified and directed

Supply and replace damaged /defective /unserviceable MS ERW pipe 150mm dia bore, laid in trenches or on ground/ vertically with welded joints including removing the rusted, broken old MS pipe including painting with two coats of synthetic enamel paint over a coat of zinc chrome primer in open places and with bitumen coating/ felt cover in trenches all as directed.

Supply and replace damaged /defective /unserviceable MS ERW pipe 100mm dia bore, laid in trenches or on ground/ vertically with welded joints including removing the rusted, broken old MS pipe including painting with two coats of synthetic enamel paint over a coat of zinc chrome primer in open places and with bitumen coating/ felt cover in trenches all as directed.

Supply & Fix Fire Hydrant landing valve Type B (double head outlet) of 63 mm dia of size conforming to IS 5290 complete all as specified and as directed.

Supply & Fix Fire Hydrant landing valve Type A (single head outlet) of 63 mm dia of size conforming to IS 5290 complete all as specified and as directed.

Supply & Fix Fire Hydrant stand post 80mm dia GI glanged type 1.5Mtr height with provn of single outlet conforming to IS 908 complete all as specified and as directed.

S&F pressure gauge 100mm dia with ball valve of pressure 0-21 kg/sqcm complete all as specified and as directed.

Supply & fix 63 mm dia 15 mtr long hose conforming to IS 636 complete with male and female brass coupling conforming to IS 903 complete all as directed.

Supply & Fix hose box for hose reel of 20 mm size of 30 mtrs length complete with coupling branch pipe and nozzle compelete all as directed.

Supply & Fix hose box made of 18 gauge MS sheet 1220 mm X 600 mm X 1800 mm width double door with 4 mm thick glasses and door frame made of 16 gauge MS sheet painted fire red outside and brilliant while inside yard complete all as specified and as directed.

Supply & Fix hose box made of 18 gauge MS sheet 800 mm X 600 mm X 250 mm width double door with 4 mm thick glasses and door frame made of 16 gauge MS sheet painted fire red outside and brilliant while inside yard complete all as specified and as directed.

Dismantling and taking out unserviceable sluice valves and material and labor for CI sluice valves double flanged 150mm dia. P.N. 1.6 with chrome steel spindle confirming to IS, complete including inserting and jointing materials bolts,nut and gasket complete all as specified and as directed.

Dismantling and taking out unserviceable non-returnable valves and material and labor for CI non-returnable valves double flanged 150mm dia. P.N. 1.6 with chrome steel spindle confirming to IS, complete including inserting and jointing materials bolts,nut and gasket complete all as specified and as directed.

Material and labor for LT panel board made out of CRCA sheet of 3mm sheet thick indoor type totally enclosed with front opening, hinged doors with projected and raised platform of suitable size weather and water proof with necessary locking arrangements including as per IS 8623. Copper bus bar with half neutral insulators suitable for 3Phase 4wire LTAC, 50Hz,415Volt 600 Amps bus bar (phase & Neutral), Complete with powder coating finish with necessary internal wiring and provision of metering facility, and digital Volt meter and Ammeter. Along with fully programmed micro controller (Micrologic / Dynatek / Equ) for Automatic / Manual, Main and Stand by pump starters including dismantling and taking down the unserviceable existing LT panel as directed. INCOMER i) MCCB 400 Amps 4pole, 36 KA, Thermal magnetic DC type - 1 Nos OUTGOING i) MCCB, 4 pole 200 Amps, 36KA, Thermal magnetic DC Type - 3 Nos ii) MCCB, 4 pole 100 Amps, 36KA, Thermal magnetic DC Type - 1 Nos iii) Change over 320Amp -01 No iv) indication lamps for auto /manual start (R,Y,B) LED type - 1 Set MAKE of MCCB : C&S/ Legrand/ Seimens/ ABB /L&T/ Schinder v) Star delta starters suitable for 45KW- Nos 03 vi) Digital type Amps Meter, Voltmeter & power factor Meter- 1 Each set vii) Phase failure relays Indications : (a) Fail to start Main (b) Pump running Main pump. (c) Line pressure normal. (d) Priming failed.

M&L for construction of brick masonery valve chamber in repair of size 0.9x0.9x0.9M (internal dimension) (above GL 0.30 mtr) suitable for fixing of sluice valves, 15cm thick foundation using PCC 1:4:8 type D-2 over 15cm thick hardcore of broken stone, 23cm thick brick walls built in cement and sand mortar 1:4, 15mm thick internal and external plaster including top of floor in cement and sand mortar 1:3, 15mm thick, finished even and smooth, without using extra cement, 5 mm thick plate cover on 50mm x 50mm x 6mm MS angle frame embeded in PCC 1:2:4 type B-1coping, having rectangular, hinged, opening of size 150 x 100mm with locking arrangements ,hold fasts, etc, applying one coat of red oxide primer and two coats of synthetic enamel paint to all steel surfaces and earth work in any type of soil including disposal of debris outside MD land complete all as specified.

S&F and installed of 04 Loop Addressable fire alarm panel with two battery with accessories complete all as specified and directed. Make :- Edward / GST / Honey well / Morley / Siemens

S&F of new combine Addressable smoke dectector complete all as specified and directed. Make :- Edward / GST / Honey well / Morley / Siemens

Supply and fix fault isolator module with automatic resetting arrangement complete all as specified and directed. Make: Edward / GST / Honey well / Morley / Siemens

Supply & fix control module (HZM) item suitable for flame detectors complete all as specified and directed. Make : Edward / GST / Honey well / Morley / Siemens

S& F of Input module complete all as specified and directed. Make :- Edward / GST / Honey well / Morley / Siemens

Supply & fixing of conventional manual pull station- single action- Approval UL Listed I NOTE: need to connect with back box Addressable mini monitor module eith back box for manual pull station complete all as specified and directed. Make :- Edward / GST / Honey well / Morley / Siemens

S& F of New Hooter cum scrobe with control module complete all as specified and directed. Make : Edward / GST / Honey well / Morley / Siemens

Supply & laying PVC FRLS armoured cable 1.5sq mm solid copper conductor 2 core, XLPE Insulated, Extruded PVC sheathed, galvanized steel strip, electric power cables (heavy duty) 1100 Volts grade, laid in duct / along pole/wall etc including making connection complete and making good the distrubed surface matching with existing surface complete all as directed. Make of wire : Polycab/ Havells/ Gloster Note : 1. The cost of Al thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it

Supply and fix in replacement of response indicator (RI) complete all as specified and directed. Make :- Edward / GST / Honey well / Morley / Siemens

Shree Ayyappa Engineering