Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.4 LAccepted-AOC MIG 1 26 PT RAVI SHANKAR SHUKLA NAGAR KORBA KORBA KORBA CHHATTISGARH 495677 | KORBA | CHHATTISGARH | 495677 | L1 | Accepted-AOC TC recommends to award the work in favour of L1 bidder Aadya Construction for total work order value of Rs.2436877.18 | |
| 2 | L2₹28.1 L+₹3.7 L (15.2%)Rejected-Finance MIG 2 105 PT RAVI SHANKAR SUKLA NAGAR KOSABADI DISTT KORBA CG 495677 | KORBA | KORBA | CHHATTISGARH | 495677 | L2 | Rejected-Finance L2 | |
| 3 | L3₹28.8 L+₹4.4 L (18.0%)Rejected-Finance 1C 26 GAJRA STAFF COLONY BANKI MONGRA KORBA CG 495447 | KORBA | CHHATTISGARH | 495447 | L3 | Rejected-Finance L3 | |
| 4 | L4₹31.5 L+₹7.1 L (29.3%)Rejected-Finance MIG II 1 PT R S S NAGAR KORBA C G | KORBA | KORBA | CHHATTISGARH | 495677 | L4 | Rejected-Finance L4 |
Tender Value
₹47.5 L
EMD Value
₹59,500
Closing Date
28 Feb 2024, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CHIEF MANAGER (CIVIL), CWS-CS, KORBA
OFFICE OF THE STAFF OFFICER (CIVIL), CWS-CS, KORBA
Major repair and maintenance of CWS House, of CWS-CS, Korba.
2024_SECL_301850_1
SECL/CWS/KB/SO(C)/ET/23-24/11 DTD.17.02.24
Open Tender
Civil Works - Buildings
Item Rate
60 days
SECL, CWS-CS
Please refer tender document
3 documents required · 3 mandatory
₹59,500
13 Apr 2024
19 Feb 2024
1 Mar 2024
19 Feb 2024
28 Feb 2024
19 Feb 2024
19 Feb 2024 - 23 Feb 2024
Amount
Item Description/ Heading
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soi
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:1½:3 (1 cement : 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
Brick work with fly ash brick , F.P.S. (non modular) class designation 7.5 in foundation and plinth in cement mortar 1:6 ( 1 cement : 6 coarse sand )
Brick work with fly ash bricks F.P.S. (non modular) class designation 7.5 in superstructure above plinth level up to floor five level in : - Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Cold twisted bars
12 mm cement plaster of mix : 1:6 (1 cement : 6 fine sand)
12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand)
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply cpmplete as per direction of Engineer-in-charge. External work 50mm nominal outer dia. Pipes.
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)
Prividing and fixing Wall Hung European pan with in Built Jet, PP Soft Close Seat Cover, Hinges, Accessories Set, Size: 370x540x410 mm material code CNS-WHT959JSPP or equivalent as per instruction of Engineer-in-charge.
Prividing and fixing metropole Regular In Wall Flush Valve, 40mm Size for Western Commode with Round Flange material code FLV-CHR-1093N or equivalent as per instruction of Engineer-in-charge.
Prividing and fixing hand jet spray for European pan of approved quality conforming to IS:8931 15mm nominal bore.
Prividing and fixing Urinal Basin Wall Hung, Size: 355x340x535 mm, material code USR-WHT - 13261 with Pressmatic Taps for urinal Valve Auto closing system with Built-in Control Cock & Wall Flange material code PRS-CHR-077 or equivalent as per instruction of Engineer-in-charge.
Prividing and fixing Table Top Wash Basin, Size: 425x340x175 mm, material code CNS-WHT - 903 or equivalent as per instruction of Engineer-in-charge.
Prividing and fixing Concealed Body for Single lever Basin Mixer Wall Mounted, but without Exposed Parts material code ACD-CHR - 223N or equivalent as per instruction of Engineer-in-charge.
Prividing and fixing Exposed Part Kit of Single Level Basin Mixer Wall Mounted Consisting of Operating Lever Cartridge SLEEVE wALL fLAnge, Nipple & Spout (Compatible with ALD-233N & ALD-235N) material code OPR-CHR - 10233NKPM or equivalent as per instruction of Engineer-in-charge.
Prividing and fixing Single Function 100mm Round Shape Overhead Shower material code OHS-CHR - 1989 or equivalent as per instruction of Engineer-in-charge.
Prividing and fixing Concealed Body for Single Lever High Flow Diverter wiyh Button Assembly, but without Exposed Parts material code ALD-CHR - 079N or equivalent as per instruction of Engineer-in-charge.
Prividing and fixing Exposed Part Kit of Single Level Hi Flow in wall Driver (Compatible in wall part ALD-079N is said separately) material code OPR-CHR - 10079NKPM or equivalent as per instruction of Engineer-in-charge.
Prividing and fixing Bath Tub Spout with ButtonAttachment for Hand Shower with Wall Flange material code SPJ-CHR - 10463PM or equivalent as per instruction of Engineer-in-charge.
Prividing and fixing Hand Shower a 100mm Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System material code HSH-CHR - 1937 with Flexible Metal Hose, 12mm dia. & 1.5M material code SHA-CHR 549012 and Premium Wall Bracket For Hand Shower 35mm dia. & 100mm Long Round Shape Material Code SHA-CHR-555 or equivalent as per instruction of Engineer-in-charge.
Prividing and fixing Soap Dish material code AQN-CHR - 7731 or equivalent as per instruction of Engineer-in-charge.
Prividing and fixing Towel Ring Round material code AQN-CHR - 7721 or equivalent as per instruction of Engineer-in-charge.
Prividing and fixing Towel Shelf 600mm long with Lower Hangers material code AQN-CHR - 7781 or equivalent as per instruction of Engineer-in-charge.
Prividing and fixing Sink Cock with Regular Swivel Spout material code FLR-CHR - 5347N or equivalent as per instruction of Engineer-in-charge.
Prividing and fixing Bib Cock with Wall Flange material code OPR-CHR - 10041PM or equivalent as per instruction of Engineer-in-charge.
Prividing and fixing Two-Way Bib Cock with Wall Flange material code OPR-CHR - 10041PM or equivalent as per instruction of Engineer-in-charge.
Prividing and fixing Angle valve with Wall Flange material code OPR-CHR - 10053PM or equivalent as per instruction of Engineer-in-charge.
Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal outer dia Pipes
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 40 mm nominal outer dia Pipes
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 50 mm nominal outer dia Pipes
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 75 mm bend
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm bend
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 75 mm
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work
Finishing walls with water proofing cement paint of required shade : Old work (one or more coats applied @ 2.20 kg/10sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat.
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Medium shade pigment using 50% white cement 50% Grey cement
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work
Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 25 mm dia
French spirit polishing : One or more coats on old work
Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in charge (Door handle, lock and stopper etc.to be paid separately).
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness
Providing and fixing Zebra blinds type rolling Curtain with all necessary arrangement as per requirement for windows as per instruction of Engineer in Charge.
Providing and fixing door handle in pair for frameless roughened glass door shutter of approved brand and manufacture, all complete as per direction of Engineer in Charge.
Providing and fixing door lock for frameless roughened glass door shutter of approved brand and manufacture, all complete as per direction of Engineer in Charge.
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm
Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: Channels, angles, tees and flats
Providing and fixing Fly Proof Stainless steel Grade-304 wire gauge with 0.5mm dia. Wire and 1.4mm wide aperture as per instruction of Engineer in Charge.
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar
Providing and fixing unplasticised Rigid PVC Pipes confirming to IS: 13592 Type A, as per instruction of Engineer in Charge. 75mm
Providing and fixing unplasticised Rigid PVC Pipes confirming to IS: 13592 Type A, as per instruction of Engineer in Charge. 110mm
Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.
Dismantling G.I./PVC pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 75 to 80 mm dia pipe
Cleaning door/ window/ ventilation glass including removing of the same whereever required and re-fixing the same as per instruction of Engineer in Charge.
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side
Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. Anodized (AC 15 ) aluminium tubular handle bar
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
Total impact of GST for the purpose of CTC
Sourabh Kumar Singh
RISHABH KUMAR SAHU
KESHAV PANDEY
techsummary_312695.pdf
PDF • 0.64 MB
finsummary_312695.pdf
PDF • 3.37 MB
loa11.PDF
PDF • 6.83 MB
BOQ Comparative Chart
xlsx • 0.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .