Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹34.9 LAccepted-AOC | L-1 | Accepted-AOC Lowest bidder | |
| 2 | L-2₹38.0 L+₹2,664.40 (0.07%)Rejected-AOC JAMMU PYRAMID CONSTRUCTIONS SAINIK COLONY JAMMU JAMMU 29 SECTOR SAINIK COLONY JAMMU JAMMU KASHMIR 180011 | JAMMU | JAMMU AND KASHMIR | 180011 | L-2 | Rejected-AOC Other than lowest bidder |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
6 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col Ram G
GE Kaluchak Pin-900673 C/O 56 APO
REPAIR REPLACEMENT OF PUMP, MOTOR, STARTER, DISTRIBUTION PIPE LINE AND WATER SUPPLY INFRA AT KALUCHAK MIL STN UNDER GE KALUCHAK
2023_MES_575488_1
GE/KC/NIT-48/2022-23
Open Tender
Civil Works
Item Rate
180 days
Kaluchak
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE Kaluchak
₹90,000
Yes
25 Mar 2023
17 Jan 2023
11 Feb 2023
17 Jan 2023
6 Feb 2023
24 Jan 2023
Amount
15mm bore GI Socket medium grade ISI Marked including dismantling of old unserviceable GI socket, complete all as specified & directed.
20mm bore GI Socket medium grade ISI Marked including dismantling of old unserviceable GI socket, complete all as specified & directed.
25mm bore GI Socket medium grade ISI Marked including dismantling of old unserviceable GI socket, complete all as specified & directed.
40mm bore GI Socket medium grade ISI Marked including dismantling of old unserviceable GI socket, complete all as specified & directed.
50mm bore GI Socket medium grade ISI Marked including dismantling of old unserviceable GI socket, complete all as specified & directed.
15mm bore GI Elbow medium grade ISI Marked including dismantling of old unserviceable GI elbow, complete all as specified & directed.
20mm bore GI Elbow medium grade ISI Marked including dismantling of old unserviceable GI elbow, complete all as specified & directed.
25mm bore GI Elbow medium grade ISI Marked including dismantling of old unserviceable GI elbow, complete all as specified & directed.
40mm bore GI Elbow medium grade ISI Marked including dismantling of old unserviceable GI elbow, complete all as specified & directed.
50mm bore GI Elbow medium grade ISI Marked including dismantling of old unserviceable GI elbow, complete all as specified & directed.
15mm bore GI long bend medium grade ISI Marked including dismantling of old unserviceable GI long bend, complete all as specified & directed.
20mm bore GI long bend medium grade ISI Marked including dismantling of old unserviceable GI long bend, complete all as specified & directed.
25mm bore GI long bend medium grade ISI Marked including dismantling of old unserviceable GI long bend, complete all as specified & directed.
15mm bore GI union medium grade ISI Marked including dismantling of old unserviceable GI union, complete all as specified & directed.
20mm bore GI union medium grade ISI Marked including dismantling of old unserviceable GI union, complete all as specified & directed.
25mm bore GI union medium grade ISI Marked including dismantling of old unserviceable GI union, complete all as specified & directed.
40mm bore GI union medium grade ISI Marked including dismantling of old unserviceable GI union, complete all as specified & directed.
50mm bore GI union medium grade ISI Marked including dismantling of old unserviceable GI union, complete all as specified & directed.
15mm bore GI nipple of different length as per requirement, both end screwed, medium grade ISI Marked including dismantling of old unserviceable GI nipple, complete all as specified & directed.
20mm bore GI nipple of different length as per requirement, both end screwed, medium grade ISI Marked including dismantling of old unserviceable GI nipple, complete all as specified & directed.
25mm bore GI nipple of different length as per requirement, both end screwed, medium grade ISI Marked including dismantling of old unserviceable GI nipple, complete all as specified & directed.
40mm bore GI nipple of different length as per requirement, both end screwed, medium grade ISI Marked including dismantling of old unserviceable GI nipple, complete all as specified & directed.
50mm bore GI nipple of different length as per requirement, both end screwed, medium grade ISI Marked including dismantling of old unserviceable GI nipple, complete all as specified & directed.
20mm x 15mm bore GI reducing socket medium grade ISI Marked including dismantling of old unserviceable GI reducing socket, complete all as specified & directed.
25mm x 20mm bore GI reducing socket medium grade ISI Marked including dismantling of old unserviceable GI reducing socket, complete all as specified & directed.
15mm x 15mm x 15mm bore GI Tee, medium grade ISI Marked including dismantling of old unserviceable GI Tee, complete all as specified & directed.
20mm x 20mm x 20mm bore GI Tee, medium grade ISI Marked including dismantling of old unserviceable GI Tee, complete all as specified & directed.
25mm x 25mm x 25mm bore GI Tee, medium grade ISI Marked including dismantling of old unserviceable GI Tee, complete all as specified & directed.
15mm bore GI solid plug, heavy duty, ISI Marked including dismantling of old unserviceable solid plug, complete all as specified & directed.
20mm bore GI solid plug, heavy duty, ISI Marked including dismantling of old unserviceable solid plug, complete all as specified & directed.
25mm bore GI solid plug, heavy duty, ISI Marked including dismantling of old unserviceable solid plug, complete all as specified & directed.
Notes for Srl Item No.1 to 31 (i) Any material required for attending complaints shall be measured and paid under respective item here-in-before. (ii) The complaints shall be attended and the defects shall be rectified by a team of expert and experienced plumber/pipe fitter as directed. (iii) The complaints shall be attended and defect shall be rectified within 08 hrs commencing from date and time of notifying the complaint failing which a penalty @ Rs 100/- per complaint per day (08 hrs) shall be levied upon/imposed on the contractor and recovery shall be made from contractor's dues. Contractor rep shall be available wef 0800 Hrs to 2000 Hrs to receive and notify the complaint. (iv) In case, after checking and attending the defect, it is not possible to rectify the defects within 08 Hrs the facts shall be brought to the notice of Engineer-in-charge by the contractor /his rep. If Eng-in-charge is satisfied with contractors view, no recovery will be made.
(v) Cutting of GI pipe in position and threading is also deemed to be included in the unit rate of the respective item No. 1 to 31. (vi) The pipe fitter shall always be in possession of die set complete with cutters, taps, pipe wrench, chain wrench, caulking tools, complete set of spanners and ladders etc., as required at site. (vii) The complaints for the above work shall be collected by contractor rep from MES maint incharge / JE E/M on daily basis.
Run lead including spurn yarn suitable for 80mm bore CI/DI pipe including taking out old unserviceable run lead / spurn yarn, complete all as specified & directed.
Run lead including spurn yarn suitable for 100mm bore CI/DI pipe including taking out old unserviceable run lead / spurn yarn, complete all as specified & directed.
Run lead including spurn yarn suitable for 150mm bore CI/DI pipe including taking out old unserviceable run lead / spurn yarn, complete all as specified & directed.
Notes for Srl Item No. 32 to 34 (i) Any material such as lead, spun yarn, CI specials, lead joints, D-joints, mechanical joints, clamps, joints etc required for attending complaints shall be measured and paid under relevant items. (ii) The complaints shall be attended and the defects shall be rectified by a team of expert and experienced plumber/pipe fitter as directed. (iii) The complaints shall be attended and defect shall be rectified within 08 hrs commencing from date and time of notifying the complaint failing which a penalty @ Rs 100/- per complaint per day (08 hrs) shall be levied upon/imposed on the contractor and recovery shall be made from contractor's dues. Contractor rep shall be available wef 0800 Hrs to 2000 Hrs to receive and notify the complaint.
(iv) In case, after checking and attending the defect, it is not possible to rectify the defects within 08 Hrs the facts shall be brought to the notice of Engineer-in-charge by the contractor /his rep. If Eng-in-charge is satisfied with contractors view, no recovery will be made. (v) Cutting/ welding/ connecting of CI/DI pipe in position and threading for insertion CI/DI specials and fittings is also deemed to be included in the unit rate of the respective item No. 32 to 35. (vi) The pipe fitter shall always be in possession of die set complete with cutters, taps, pipe wrench, chain wrench, caulking tools, complete set of spanners and ladders etc., as required at site. (vii) The complaints for the above work shall be collected by contractor rep from MES maint incharge / JE E/M on daily basis.
Lifting defective submersible pumpset, column pipes (any number) from bore well (any depth/size), setting aside and stacking column pipes for reuse, lowering of submersible pumpset alongwith column pipes in the bore well as existing and making water and electrical connections as existing for running of pump motors, complete all as specified & directed. Notes : (i) Rubber gasket, nut, bolts, washer shall be measured and paid for separately under appropriate item as 'Supply only' of this schedule. (ii) Lifting / lowering shall be measured and paid only once for same nature of repair. (iii) Contractor shall attend and rectify the breakdown within 8 hours failing which a recovery of Rs 500/ hour shall be effected. (iv) In case the submersible pump set falls down during Extn/ Lowering/ Lifting, No extra payment to be made to the contractor for this work.
Supply only rubber gasket required against Serial Item No 35 here-in-before as per existing dia, complete all as specified & directed.
Supply only nut and bolt and washer required against Serial Item No 35 here-in-before as per existing dia and length, complete all as specified & directed.
Repairs to submersible pumpset of capacity 30 to 35 HP, 3 phase, 415 volts involving of following operations :- (a) Opening of the defective motor in MES yard / Pump House/ Workshop ( as approved by GE), cleaning the covers and parts as applicable in presence of Engineer-in-Charge to ascertain the quantum of defects and repairs involved. (b) Transporting the defective motor to contractor's workshop for repairs as directed by the Engineer in Charge and carrying out the necessary repairs including replacement of defective unserviceable parts. (c) Assembling the motor after repair. (d) Spray painting the repaired motor externally with two coats of synthetic enamelled paint of shade as approved by the Engineer-in-Charge. (e) Transporting the repaired motor to MES yard/ Pump House and carrying out necessary test in presence of Engineer-in-Charge to establish the functionability of the repaired motor up to the entire satisfaction of the Engineer-in-Charge.
All as per Srl item No.38 above but submersible pumpset of capacity 20 to 25 HP.
All as per Srl item No.38 here-in-before but submersible pumpset of capacity 15 to 17.5 HP.
All as per Srl item No.38 here-in-before but submersible pumpset of capacity 10 to 12.5 HP.
All as per Srl item No.38 here-in-before but submersible pumpset of capacity 5 to 7.5 HP.
Notes for Serial Item No 38 to 42 here-in-before : (i) Any parts required to be replaced during servicing, overhauling of motor, pump set etc. shall be measured and paid for separately under appropriate item as 'Supply only' of this schedule. However labour element involved in replacement is deemed to be included in quoted rates against these items. (ii) Any minor repairs involved to make the motor, pump functional even if notified by the Engineer-in-Charge shall be carried out by the contractor without any extra cost to the department. (iii) Rewinding of stator of motor, any machine to pump where involved shall be measured and paid for separately against relevant item of this schedule. (iv) Greasing/oiling etc of parts as required shall be done by the contractor without any extra cost to the department.
Supply only the following items to be incorporated against Serial Item No 38 to 42 above, suitable for submersible pumpset of capacity 5 HP to 35 HP of existing make, complete all as specified & directed :-
Water lubricant seal suitable for motor
Bowl assembly
T-bolt for motor
Thrust bearing for motors as per existing
MS Flanged reducer as per existing
Stud as per existing size
Neck ring
Stainless steel key for impeller shaft
Impeller ( CI)
Stainless steel motor - pump coupler
Bush (gun metal) for pump as per existing
Bush (rubber) for pump as per existing
Repair to pump shaft
Repair to motor shaft
Bush to motor shaft as per existing
Repair to impeller by brazing or as required for 5 to 35 HP Pump set complete all as specified and directed.
Sand guard
Motor adaptor
Impeller sleeve(SS)
Rewinding of stator/rotor of submersible motor pump working on three phase 415 Volt to 440 Volts, 50HZ of capacity 5 - 7.5 HP with water proof insulated copper wire of existing gauge (IS:8783:1995) and size to achieve the specified / required RPM /discharge including taking out old unserviceable winding, complete all as specified & directed.
Rewinding of stator of submersible motor pump working on three phase 415 Volt to 440 Volts, 50HZ of capacity 10 - 12.5 HP with water proof insulated copper wire of existing gauge (IS:8783:1995) and size to achieve the specified / required RPM /discharge including taking out old unserviceable winding, complete all as specified & directed.
Rewinding of stator of submersible motor pump working on three phase 415 Volt to 440 Volts, 50HZ of capacity 15 - 17.5 HP with water proof insulated copper wire of existing gauge (IS:8783:1995) and size to achieve the specified / required RPM /discharge including taking out old unserviceable winding, complete all as specified & directed.
Rewinding of stator of submersible motor pump working on three phase 415 Volt to 440 Volts, 50HZ of capacity 20 - 25 HP with water proof insulated copper wire of existing gauge (IS:8783:1995) and size to achieve the specified / required RPM /discharge including taking out old unserviceable winding, complete all as specified & directed.
Rewinding of stator of submersible motor pump working on three phase 415 Volt to 440 Volts, 50HZ of capacity 30 - 35 HP with water proof insulated copper wire of existing gauge (IS:8783:1995) and size to achieve the specified / required RPM /discharge including taking out old unserviceable winding, complete all as specified & directed.
Cleaning the over head water tank of capacity 50000 Gallons (twin or single chamber) by draining the complete water and brushing the surfaces with iron brush and removing the complete mud/silt and getting washed the complete inner surfaces of the tank using the bleaching powder and applying a coat of white wash inside the tank including bottom, sides and ceiling and writing date of cleaning the tank out side complete all as specified and directed. , complete all as specified & directed by the Engr-in-Charge.
Note : All type of T & P required for cleaning deemed to be included in the quoted rate. The unit rate quoted deemed to be including draining of water with mechanical equipments and working in water and mud etc. The unit rate quoted deemed to be include all safety precuation which shall be taken while working on RCC overhead reservoir/ Under ground sump and Contractor or his engineer shall be available during execution of the job. Lighting arrangement if required to be provided by the Contractor, temporarily at his own arrangements and the amount quoted for that is deemed to be inclusive in the unit rate and electricity / diesel shall not be provided by the department.
Cast lron sluice valve, non-rising type conforming to IS:14846-2000 of 150 mm bore consisting of SS spindle as per IS:6603, cast iron body, dome & wedge as per IS:210, greasy jute type gland packing, fasteners as per IS:1367, natural rubber gasket, CI manual hand wheel etc, complete double end flanged and drilled, of Class PN-1 ( ISI marked) including all jointing materials such as rubber gasket insertion sheet nuts, bolts and washers etc, testing, taking out old unserviceable sluice valve from pipeline and removing from site, complete all as specified & directed.
Gun metal gate valve confirming to IS : 778 -1980, CL-1 with iron wheel head screwed both ends for iron pipe including taking down old unserviceable valve, complete all as specified & directed for the following sizes :-
20mm bore
25mm bore
40mm bore
50mm bore
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out in any type of soil for water supply pipe line etc complete all as specified & directed. Note : Due care shall be taken while deciding cable route for excavation. However any damage to Signal, BSNL, MES cable water/sewage pipe or any other service while excavation will be made good by the contractor and cost of the same for jointing material & labour is deemed to be included in the cost of excavation.
Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm, complete all as specifed & directed.
Removing excavated material to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified & directed.
Taking out cast iron water main/ ductile iron pipe line (including all fittings) with spigot and socket ends/ flanged pipes including burning out lead joints and recovering lead and removing to store for reuse, complete all as specified & directed for the following sizes :- Note : Earth work shall be measured and paid for separately under respective items.
80mm bore
100mm bore
150mm bore
Ductile iron pipe, socket & spigot with bulb type rubber tyton gasket and jointing material as per standard complete of class K-7 confirming to IS: 8329:2000 (latest revision), ISI marked laid in trenches/ fixed on pedestals etc including complete mortar lining (CML) and outside black bitumen coating etc complete all as specified & directed for the following sizes :- Note: Earth work & DI fittings will be measured and paid for separate under respective items.
80mm bore
100mm bore
150mm bore
Cast iron/ Ductile iron fittings confirming IS:9523 2000 of class K-12, PN-10 for spigot and socket pipe such as bends (any type, radius and angle), tapers any type (straight, bend, radius and angle) tapers any type (straight, bend, increasing, decreasing or double socket etc),Tee pieces single branch,Y junction, double branch, cross (all sockets or socket and spigot) collars caps and plugs upto 200 mm bore pipes, complete all as specified & directed Note : Earth work shall be measured and paid for separately under respective items.
Taking out existing old unserviceable /rusted / broken galvanised iron water main pipe line including all fittings, complete all as specified & directed for the following sizes :- Note : Earth work shall be measured and paid for separately under respective items.
20mm bore
25mm bore
40mm bore
50mm bore
80mm bore
100mm bore
Galvanised iron medium grade water tubing with all fittings and fixtures (ISI marked) confirming to IS:1239, laid in trenches or fixed on wall or in any position including necessary saddles and iron clamps, complete all as specified & directed for the following sizes :- Note: The work shall be carried out at various locations under GE Kaluchak on external building walls upto a height of 4th story. Cost of necessary scaffolding arrangement shall be deemed included in the unit rate for these items.
20mm bore
25mm bore
40mm bore
50mm bore
80mm bore
100mm bore
Supply only bleaching powder in 25Kg bags, expiry date of bleaching powder should be marked on the bag and it must be clear and readable, complete all as specified & directed by Engineer-in-charge.
Supply only Alum crystal to settle down the suspended impurities, complete all as specified & directed by Engineer-in-charge.
Supply only copper sulfate of superior quality, complete all as specified & directed by Engineer-in-charge.
Carrying out physical, chemical & bacteriological analysis all as per IS:10500 - 2012 for drinking water (Fresh potable/ raw water from Pump Houses at various locations under GE Kaluchak) from approved govt or other approved labs, complete all as specified & directed. Notes : (a) The rate quoted deemed to inclusive of collecting and transporting water sample in sterilised bottle/ PVC container & submitting the same for testing on same day. (b) Water sample from one borewell will be considered as one job.
Re-development of tube well by means of pumping by air compressor of minimum pressure 10Kg/cm2 (compressor to be arranged by contractor at his own cost), until sand free and clean water is obtained at the optimum yield including testing of water sample from Government approved Laboratory / Regional Research Laboratory to confirm the potability of water as per IS-10500-2012 complete all as specified & directed. Notes : (a) The development shall be carried out in each water bearing zone and till the yield of the bore well improves at a fixed draw down of water. The stata chart shall be provided by the Department. (b). The cost of arranging and transportation of compressor and allied equipments required for development shall be deemed to be included in the quoted rate and nothing extra shall be admissible on this account.
Taking out CI/ MS/ DI pipe flanged type of 150mm/100mm bore of rising main/ delivery /over flow of over head reservoir of height 30 metre, cleaning, welding and refixing with replacing nuts, bolts, rubber gasket/ gland packing etc including replacement of sluice valve as required at site, complete all as specified & directed. Note : The work shall be carried out at various installations under GE Kaluchak. Rates quoted includes for necessary scaffolding arrangement upto a heigfht of 30 metres. The sluice valve shall be measured and paid for separately under respective item.
Repacking stuffing box of sluice valve spindle, replacement of worn out check nuts, repairs to gate assembly, replacement of jointing materials such as rubber gasket, nuts, bolts and washers gland rope including taking apart and reassembling for 80mm bore, complete all as specified & directed.
Repacking stuffing box of sluice valve spindle, replacement of worn out check nuts, repairs to gate assembly, replacement of jointing materials such as rubber gasket, nuts, bolts and washers gland rope including taking apart and reassembling for 100mm bore, complete all as specified & directed.
Repacking stuffing box of sluice valve spindle, replacement of worn out check nuts, repairs to gate assembly, replacement of jointing materials such as rubber gasket, nuts, bolts and washers gland rope including taking apart and reassembling for 150mm bore, complete all as specified & directed.
Taking out old unserviceable sluice valve of 80mm bore and refixing the same after refacing, regrinding, threading etc., as directed, complete all as specified & directed.
Taking out old unserviceable sluice valve of 100mm bore and refixing the same after refacing, regrinding, threading etc., as directed, complete all as specified & directed.
Taking out old unserviceable sluice valve of 150mm bore and refixing the same after refacing, regrinding, threading etc., as directed, complete all as specified & directed.
Packing glands of size 6-10mm, complete all as specified & directed.
Packing glands of size 11-25mm, complete all as specified & directed.
Column pipe made of MS pipe 80mm bore, heavy duty, ISI marked, 3 Mtr length each welded with MS flanged drilled for nut bolt and washer including rubber gasket 3 mm thick, complete all as specified & directed.
Column pipe made of MS pipe 100mm bore, heavy duty, ISI marked, 3 Mtr length each welded with MS flanged drilled for nut bolt and washer including rubber gasket 3 mm thick, complete all as specified & directed.
PVC insulated and sheathed flat 3 core, 6 Sqmm copper stranded conductor water proof submersible cable fixed to submersible monoblock pump set to starter as directed including testing & taking out old unserviceable cable, complete all as specified & directed.
PVC insulated and sheathed flat 3 core, 10 Sqmm copper stranded conductor water proof submersible cable fixed to submersible monoblock pump set to starter as directed including testing & taking out old unserviceable cable, complete all as specified & directed.
PVC insulated and sheathed flat 3 core, 16 Sqmm copper stranded conductor water proof submersible cable fixed to submersible monoblock pump set to starter as directed including testing & taking out old unserviceable cable, complete all as specified & directed.
Pumping out water and sediments from swimming pool of capicity 11 lakh liters situated near APS Kaluchak and carrying out cleaning complete after scrapping out fallen paint funai, voids etc by using machanical scrappers brushes, cleaning with fresh water and applying lime / stable bleaching powder solution diluted in water drying for two hours washing out with clean water, cleaning the external area of the swimming pool, complete all as specified & directed.
Notes : (a) The water inside the swimming pool shall be vacated by the contractor by providing pump of suitable capacity at his own arrangement. (b) The entire scope of items shall be carried out in period of 24 hours so that swimming pool can be bring back into operation within 24 hrs.
Cast lron sluice valve, non-rising type conforming to IS:14846-2000 of 100 mm bore consisting of SS spindle as per IS:6603, cast iron body, dome & wedge as per IS:210, greasy jute type gland packing, fasteners as per IS:1367, natural rubber gasket, CI manual hand wheel etc, complete double end flanged and drilled, of Class PN-1 ( ISI marked) including all jointing materials such as rubber gasket insertion sheet nuts, bolts and washers etc, testing, taking out old unserviceable sluice valve from pipeline and removing from site, complete all as specified & directed.
Cast lron sluice valve, non-rising type conforming to IS:14846-2000 of 80 mm bore consisting of SS spindle as per IS:6603, cast iron body, dome & wedge as per IS:210, greasy jute type gland packing, fasteners as per IS:1367, natural rubber gasket, CI manual hand wheel etc, complete double end flanged and drilled, of Class PN-1 ( ISI marked) including all jointing materials such as rubber gasket insertion sheet nuts, bolts and washers etc, testing, taking out old unserviceable sluice valve from pipeline and removing from site, complete all as specified & directed.
Cast iron non return valve, single door confirming to IS:5312, Part-1 / BS EN 12334 (BS:5153) of 150mm bore, class PN 1.6 gun metal sheat and flap with flanged and drilled flanged ends including having bypass arrangement, complete all as specified & directed .
PCC 1:4:8, nominal mix, type D-2 using 40mm graded crushed stone aggregate as in foundations, filling, mass concrete, pipe line supports etc complete all as specified & directed.
Chlorine test kit with coloured sample complete with all testing fitments and OT solution in rexene finish box, complete all as specified & directed.
Supply only OT solution for chlorine test 500 ML bottle, complete all as specified & directed.
Supply only calcium hypochlorite (chlorine content 65% to 70%) high strength calcium based granular disinfectant in air tight container for water treatment more stable than chlorine gas and stronger than bleaching powder of following specifications : (a) Chemical analysis & physical observations : Description : Whitish granules Granular size (Mesh passing through – 100 BSS) : 1.1 (± 0.1) % , Water / moisture: 5.00 (± 0.2) % Other insoluble Calcium salts: 1.1 (± 0.1) % Mercury & other Heavy Metal contaminants : BDL. The chlorination chemical must contain appropriate quantities of dispersants / corrosion inhibitors to prevent encrustation / scaling in distribution systems.
(b) Strength in terms of quantity of chlorination chemical required to obtain free chlorine of 1 ppm per lakh liters of water: Requirement must be 100 gm. per one lakh litre of water to achieve 05-1.0 ppm Av. Cl. at injection point (site & raw water quality variations may apply additionally). (c) Stability: Projected shelf life of chlorination chemical must be one year with minimal loss of chlorine. Note: The Contractor shall provide original test certificate with hologram to the Engineer-in-charge .
Cleaning the entire area within the fencing / boundary wall of tubewell installations which includes cutting of bushes/ shrubs/ unwanted grass in the periphery/surrounding of installation i.e O/H reservoir, Gen rooms, Clean water sumps, removing unwanted grass from the installation including sweeping of whole area and disposal of all the removed materials as directed after cutting/cleaning. The plinth around the complete buildings at installation is to be maintained free from any type of grass and complete cleaning shall be carried out as specified & directed. Note : Rate quoted will be composite cleaning of area throuhout the periodicity as an when required by deploying regular source of cleaning i.e man power and all type of T&P.
Pyramid constructions
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .