Webel EOT W 25 26 000143

SUPPLYING AND LAYING TRUE TO LINE AND LEVEL DOUBLE CHARGE VITRIFIED TILES OF APPROVED BRAND CONFORMING TO IS 15622: 2006 (GROUPBIA)AND TESTED AS PER IS 13630:2006 (RELEVANTPARTS) [NON-MODULAR SIZES FOR TILES WITH WATER ABSORPTION (AV.) ≤ 0.08%] IN FLOOR, SKIRTING ETC. SET IN 20 MM THICKS AND CEMENT MORTAR (1:4) BED PREPARED AFTER APPLICATION OF SLURRY USING 1.75 KG OF CEMENT PER SQM OVER THE BASE AND 2MM THICK CEMENT SLURRY USING CEMENT @2.91KG./SQM AT THE BACK SIDE OF THE TILES AND LAID OVER THE MORTAR BED USING 0.2KG/SQM OF WHITE CEMENT USED FOR JOINT FILLING WITH APPROVED PIGMENT AS DIRECTED AND REMOVAL OF WAX COATING OF TOP SURFACEOF TILES WITH WARM WATER AND POLISHING THE TILES USING SOFT AND DRY CLOTH UPTO MIRROR FINISH COMPLETE INCLUDING THE COST OF MATERIALS,IABOUR AND ALL OTHER INCIDENTAL CHARGES COMPLETE TRUE TO THE MANUFACTURER'S SPECIFICATION AND DIRECTION OF ENGINEER-IN-CHARGE. (NOTE: THIS WORK SHOULD NOT BE EXECUTED WITHOUT SPECIFIC PERMISSION OF SUPERINTENDING ENGINEER).IN ALL FIOOR:(SIZE NOT IESS THAN 600 MMX600 MMX9.5 MM THICK) Supplying and laying true to line and level Double Charge Vitrified Tiles of approved brand

STRIPPING OFF WORN OUT PLASTER AND RAKING OUT JOINTS OF WALLS,CELINGS ETC.UPTO ANY HEIGHT AND IN ANY FLOOR INCLUDING REMOVING RUBBISH WITHIN A LEAD OF 75M AS DIRECTED within a lead of 75m as directed

PLASTER (TO WALL, FLOOR, and CEILING ETC.)WITH SAND AND CEMENT MORTAR INCLUDING ROUNDING OFF OR CHAMFERING CORNERS AS DIRECTED AND RAKING OUT JOINTS INCLUDING THROATING, NOSING AND DRIP COURSE, SCAFFOLDING/STAGING WHERE NECESSARY (IN ALL FLOOR).[EXCLUDING COST OF CHIPPING OVER CONCRETE SURFACE]Plaster (to wall, floor, ceiling etc.)with sand and cement mortar including rounding off

APPLYING INTERIOR GRADE ACRYLIC PRIMER OF APPROVED QUALITY AND BRAND ON PLASTERED OR CENCRETE SURFACE OLD OR NEW SURFACE TO RECEIVE DISTEMPER/ACRYLIC EMULSION PAINT INCLUDING SCRAPING AND PREPARING THE SURFACE THROUGHLY, COMPLETE AS PER MANUFACTURER'S SPECIFICATION AND AS PER DIRECTION OF THE EIC IN ALL FLOORS (TWO COATS) Solvent based interior grade Acrylic Primer

APPLYING ACRYLIC EMULSION PAINT OF APPROVED MAKE AND BRAND ON WALLS AND CEILING INCLUDINGS AND PAPERING IN INTERMEDIATE COATS INCLUDING PUTTY (TO BE DONE UNDER SPECIFIC INSTRUCTION OF SUPERINTENDING ENGINEER) : IN ALL FLOORS (TWO COATS) LUXURY QUALITY APPLYING ACRYLIC EMULSION PAINT

SUPPLYING , FITTING & FIXING ECO-FRIENDLY, MOISTURE RESISTANCE AND INCOMBUSTABLE GYPSUM PLASTER BOARD (DENSITY>700KGPERCU.M.) CONFIRMING TO IS 2095-PART 1,2011 OF APPROVED DESIGN AND BRAND FINISHED WITH GYPSUM JOINTING COMPOUND TO FORM A JOINTLESS FALSE CEILING ALL COMPLETE AS PER DRAWING & DIRECTION OF ENGINEER - IN- CHARGE. FALSE CEILING WITH 9.5mm thick tapered edged Gypsum Plaster Board

POST CONSTRUCTIONAL MEASURES :ANTI-TERMITE TREATMENT TO THE OUTSIDE OF FOUNDATION WITH CHEMICAL EMULSION BY ADMIXING CHLOROPYROFOS EMULSIFIABLE CONCENTRATE (1% CONCENTRATION) WITH WATER BY WEIGHT, DRILLING 12MM. DIA HOLES IN CONCRETE OR MASONRY APRON AT AN INTERVAL OF 300MM. TO A DEPTH, OF 300MM OR MORE AS CLOSE TO THE PLINTH WALL AS POSSIBLE AND THE CHEMICAL EMULSION PUMPED INTO THOSE HOLES TO SOAK THE SOIL BELOW AT A RATE OF 2.25 LITRES PER LINEAR METRE COMPLETE AS PER SPECIFICATION LAID DOWN IN PARA 4.3.1.1 OF CODE I.S.-6313 (PART-III)-1981 Anti-termite treatment to the outside of foundation with chemical