REPAIR TO COMPOUND WALL, CHAIN LINK FENCING, CULVERT, RETAINING WALL, RAILING GATES AND OTHER ALLIED WORKS AT MINNIEBAY, SRINAGAR COLONY, EME WKSP NT POOL UNDER AGE BR II AT GE MINNIEBAY, PORT BLAIR

Amount

Demolition of Unreinforced Cement Concrete in ground floors and Pavings not exceeding 15cm thick [below or above ground level] complete all as specified and as directed.

M&L for PCC 1:2:4, type B-1 using 20 mm graded stone aggregate as in roof padding and similar work complete all as specified and as directed.

M&L for 75 mm thick Cement concrete, type C1, 1:3:6 using 20 mm graded stone aggregate as in flooring/ plinth protection finishing the surface even and smooth using extra cement complete all as specified and as directed.

M&L for 75mm thick Cement concrete type D2, 1:4:8 using 40 mm graded stone aggregate in sub base of flooring/ hard standing complete all as specified and as directed.

Dismantling of stone slabs or tiles of any description or thickness in floors, aprons etc, laid, bedded and pointed in any mortar and removal of debris outside the premises complete all as specified and as directed.

M&L for machine pressed precast concrete inter locking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-40 grade with grey cement and pigment complete all as specified and as directed.

M & L for crushed stone sand filling under floors as in sand cushioning for paver tiles including watering and consolidation complete all as specified and as directed.

M&L for 18 mm thick granite (of any type) work (table rubbed and polished) as in steps, window cills, pillars, platforms and the like with edges made bull nosed, in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including molding complete as required and directed.

M&L for dismantling floor, hearth or wall tiling including cement mortar bedding [but not backing] and removing serviceable tiles to the stores and removing rubbish / debris of the premises complete all as specified and as directed.

M&L for Non Skid Ceramic Tiles, Coloured, of size exceeding 0.11 Sq.m and not exceeding 0.18 Sq.m, 7 mm to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:6 complete all as specified and as directed.

M&L for Non Skid Ceramic Tiles, Coloured, of size exceeding 0.18 Sq.m and not exceeding 0.38 Sq.m, 7 mm to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:6 complete all as specified and as directed.

M&L for Glazed Ceramic Tiles, Coloured, 450X 300X 7mm thick as in Vertical Surfaces such as Skirting, Dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing coat of 10mm thick in cement mortar 1:4 complete all as specified and as directed.

M&L for 300 x 300 x 10mm thick coloured vitrified chequered floor tiles set and jointed in cement slurry and pointed in coloured cement to match laid over 15mm thick cement backing coat in CM 1:4 complete all as specified and as directed.

M&L for Chequered Cement Concrete Tiles 300 mm X 300mm X 25 mm thick, set, jointed and pointed in neat cement slurry in floors / vertical surfaces / risers / bull nosed treads with gray cement including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:6 complete all as specified and as directed.

Dismantling of Mild Steel Work of any description not otherwise provided for complete all as specified and as directed.

S&F of mild Steel Rolled sections as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed.

S & F of mild Steel work confirming to Fe - 290, Grade E-165, as in framed work such as Grills, Gratings, Ladders etc with ends of bars shouldered and/or riveted, or forged into spikes, framed Guard Bars, Barred Iron Doors, gates, Ladders, framed Balusters, Walk Ways, Railings, framework of water Tanks and similar work complete all as specified and as directed.

S&F of plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment Fe 410-W(Gde E-250) quality-B complete all as specified and as directed.

S&F of Mild steel framed work as in doors or gates & gratings of angle or other section with gusset plates, rails braces, etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing compete as required conforming to Fe-290 Gde E-165 as specified and directed

M&L for stainless steel of grade SS-316 ,mirror polished square ,rectangular or circular pipe of different size of structural shed, balusters and railing, chain or letters of any height etc , including stainless steel arc welding and bright finishing by polishing with grinding etc,complete all as specified and directed

M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness in roof covering, etc. including ridge complete all as specified and as directed.

S & F of pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S & F of pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F of aluminium flat, wind ties of any size fixed with self tapping screws of size 40/50mm with integral EPDM washer screwed in roof covering, including all necessary drilling, bolting or riveting etc., and similar work complete all as specified and as directed.

S&F in repairs anodised aluminium 'XPM' 1.50mm x 3.00mm size for mosquito proofing 22 gauge thick complete all as specified and as directed

Demolition of Precast Concrete work built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed.

M&L for precast cement concrete block masonry with solid blocks,Type C1 1:3:6 using 20mm graded stone aggregate exc. 10 cm in width and setting in CM 1:6 complete all as specified and as directed

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m depth for foundations, shafts, wells, cessipts manhole, pier holes etc n.exc 10 Sqm on plan and getting out any type of soil complete all as specified and as directed

Returning, filling in including spreading, leveling, watering and well ramming in layers n,exc 25cm complete all as specified and as directed

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundations, filling and mass concrete and sub base etc complete all as specified and as directed.

M&L for demolition of RCC [reinforcement cut as required to facilitate demolition] of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for RCC (nominal mix) type B-1, 1:2:4 using 20 mm graded aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under reamed piles and mass concrete complete all as specified and as directed. Note : TMT bars shall be measured and paid separately

M&L for RCC (nominal mix) type B-1, 1:2:4 using 20 mm graded aggregate in Columns, pillars, piers, posts and struts complete all as specified and as directed. Note : TMT bars shall be measured and paid separately

M&L for RCC (nominal mix) type B-1, 1:2:4 using 20 mm graded aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. Note : TMT bars shall be measured and paid separately

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft & raft beams, sides & soffits of foundation & plinth beams; and similar work; vertical or to batter rough finished surfaces of concrete flat complete all as specified and as directed.

M&L for form work to sides of pillars, posts, struts, columns and stanchions rough finished surfaces Square, rectangular or polygonal complete all as specified and as directed.

M&L for form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports etc.rough finished flat surfaces.complete all as specified and as directed.

S&F for Mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

S&F for Mild steel TMT bars 6 mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips as in stirrups, spacers & binders complete all as specified and as directed.

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering to brick / concrete surfaces, 10 mm thick in CM 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M & L for rendering 5mm thick in cement mortar 1:4 over a backing coat of 10mm thick in CM 1:6 on concrete or brick masonry surfaces including mixing water proofing compound as per manufacturers instructions and finishing the top surface even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately

Supply only integral water proofing compound [ISI marked] complete all as specified and as directed

M & L for rendering 5 mm thick in CM 1:3 on fair faces of concrete surface of ceiling surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Removing loosened/ cracked concrete from sides and soffits of chajjas , beams, walls, slab etc by chiseling / picking/ brushing etc to a depth of 20 to 30 mm including removal of debris away from site all as specified and directed.

M &L for applying one coat of anti corrosive primer @ 0.25 Ltr/Sqm for the steel area to exposed old and new reinforcement to the full circumference and length of bars to form unbroken 40 Micron thick film all as specified and directed.

M & L for 15 mm thick two layer in concrete surfaces high build polymer modified cement mortar 1:2.5 , mixed with 10 litres Notobond SBR of Fosroc or equivalent product per 50 Kg of cement and 6 liters (approx) clean water all as per manufacturers instructions complete all as specified and as directed

M&L for preparation of newly plastered surfaces of wall and applying two coat of cement base paint over a coat of cement primer complete all as specified and as directed

M & L for preparation newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed.

M & L for preparation newly plastered ceiling surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall & applying two coats of acrylic emulsion based premium quality exterior antifungal paint on wall surfaces over a coat of primer all as per manufacturers instruction and as specified and as directed.

M & L for Preparing old decorated plastered surfaces of walls by washing, rubbing down and stopping distempered and painted surfaces and applying one coat of distemper oil emulsion white or tinted complete all as specified and as directed.

M & L for Preparing old decorated plastered surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces of ceilings and applying one coat of oil bound distemper on ceiling surfaces complete all as specified and as directed.

M & L for preparation of old plastered surfaces of walls and applying one coat of acrylic emulsion based premium quality matt finish exterior antifungal paint as per manufacturer's instructions complete all as specified and as directed

M & L for Preparation of old plastered surfaces of walls and applying two coat of acrylic emulsion based premium quality matt finish exterior antifungal paint as per manufacturer's instructions complete all as specified and as directed

M&L for preparation of old decorated plastered surfaces of wall including, brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of cement based paint complete all as specified and as directed.

M&L for preparation of old decorated plastered surfaces of wall including, brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of cement based paint complete all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted surface of ceiling boards any description not other wise described over 10 cm width or girth and applying one coat of plastic emulsion paint complete all as specified and directed.

M&L for cleaning the existing floor / Concrete surfaces/Path by washing rubbing etc to remove caked mud/ grease etc and applying high pressure wall jet of 120 PSI or move for obtaining a clean surfaces free from algae/organic particles and applying one coat of weather resistant floor paint complete all as specified and directed.

M&L for marking strips, lines, dashes, arrows, letters etc of 2.5 mm thick [Reflective Type] of colour White or Golden Yellow on roads, pavements and the like exceeding 10cm wide with Hot Thermo Plast material by fully automatic thermoplastic paint applicator machine, fitted with profile shoe, glass beads dispenser, propane tank heaters and profile shoe heater, driven by skilled operator on road surface including cleaning the road surface of all dirt, scales, oil grease and foreign materials etc complete all as specified and as directed.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground concrete, brick work, masonry, etc complete all as specified and as directed.

S&F of MS work as posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 (R) complete all as specified and as directed.

S&F Mild steel rag or lewis bolts, dia of necks is 12mm screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, n.exc 15cm complete all as specified and as directed.

M&L for dismantling fencing wire mesh any type complete all as specified and as directed.

S&F of PVC coated chain link MS galvanized fencing mesh of size 50x50mm, having 3mm dia wire with minimum 1mm thick PVC coating [5mm overall dia] complete fixed to any type of standards, rails, straining bolts, etc. including provision of binding wire all as specified.

Supply only MS bars 10mm dia for support to chain link fencing complete all as specified and as directed.

Supply only screw bolts 10mm dia machine made with hexagonal or square head at one end screwed the other or screwed both ends to be fitted with washers & one hexagonal or square not exc 150mm long complete all as specified and as directed.

S&F in repairs 800mm dia of convex mirror made of PC material provided with suitable Steel pipe post of 75mm dia as per site requirement. It is meant for road turning, intersections, curves, T Junctions, Hospital, Parking lots etc. It is also ideal for surveillance. It should have clear & definite mirror image having 130 degree of viewing angle. It is unbreakable & stronger than glass and fixed on ground by PCC (1:2:4) complete all as specified and as directed.

M&L for painting two coat of synthetic enamel painting (ordinary tint) including preparation of old concrete surface of any description over 10cm in width or grith not other wise described complete all as specified and directed

S&F in repair delineators made of ABS rectangular body with two nos. of highly reflective reflectors of size 105mmX85mm made of PMMA material mounted on rectangular steel pipe of size 600mmX75mmX25mm with two plates of size 100mmX250mm each is fixed duly reflectorised with white and red colour sheeting fixed on ground by PCC (1:2:4) complete all as specified and directed

S & F in repairs solar stud 125x125mmx25mm made from Aluminium alloy and PC construction solar powered by monocrystal solar panel. Type of battery. One high capacity Ni-Cd rechargeable battery. View Distance. Approximate 1000 mtrs. LEDs-010mm, 3 pieces each side and total 6 pieces are used for high brightness of different colours back-up-12 hours of continues lighting at night. Mounted on concrete. Water proof and hardness tested. Available in Red and Amber colours. Fixed on roads all as specified and directed

M&L for patchmate road repair natural containing 6% modied Bitumen anti strupping agent presure sensitive and water proofing encapsulation additiues with graded crushed lime stone as per the Manufacturers instructions including sweeping free from dust and mud, or water, scoring sunken surfaces in roads. Path etc, cutting around edges complete all as specified and as directed

S&F in repairs of 450mm internal dia reinforced concrete pipes, class NP2, laid and jointed complete with collars and jointed as specified.

AMR TRADERS

Allied Trading Company