Loading
Loading…
Loading…
Tender Value
₹1.1 L
EMD Value
₹1,200
Closing Date
2 Sept 2026, 2:00 pm5d left
Supereintending Engineer
Sellur Main Road, Near Bharathidasan University, Nagapattinam. Pin- 611 006
NEDC Nagapattinam Division Arresting roof leakage Existing Old Quarters Building Now at AEE O and M Vedaraniyam Sub Division Building in respect of Nagai EDC.
2026_EB_695599_1
05/2026-2027
Open Tender
Civil Works
Item Rate
30 days
Vedharaniyam
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹1,200
Yes
19 Aug 2026
19 Aug 2026
3 Sept 2026
19 Aug 2026
2 Sept 2026
19 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Improvement work | |||||
| 1.01 | Dismantling and removing of Existing Pressed Tiles from AEE/O&M/Vedharaniyam Office Top roof including cost of all materials, lead, lift, etc.., complete. | 54.94 | m2 | - | - |
| 1.02 | Granolithic floor finish 75mm thick with PCC 1:2:4 using HBG Jelly 10 to 12mm thick including cost all materials,labour, ,lead,lift, curing, scaffolding, etc., complete. | 4.12 | m3 | - | - |
| 1.03 | Supplying and Laying for Bitumen Sheet (Approval Quality) Over Top of Roof including cost all materials,labour, ,lead,lift, curing, scaffolding, etc., complete. | 54.94 | m2 | - | - |
| 1.04 | Cleaning and Removal of plastering for Outer wall including cost of all Materials, labour, lead, lift, Scafolding, Tools, and Tackels etc complete. | 11.25 | m2 | - | - |
| 1.05 | Plastering the walls with CM 1:5,12mm thick including cost of all materials,labou,lead,lift and scafolding etc complete. | 11.25 | m2 | - | - |
| 1.06 | Plastering the RCC work with CM 1:3,12mm thick including cost of all materials,labour,lead,
lift and scafolding etc complete | 4.5 | m2 | - | - |
| 1.07 | Manufacturing supplying and fixing of Fully Panelled steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames, stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter.The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete complying with standard specification and as directed by the departmental officers | 2.1 | m2 | - | - |
| 1.08 | Fabricating, Supplying and fixing in position of steel Sheeted windows (Four Leaves)
with the following specifications. Outer frames of windows made of ‘Z’ section F7D of
size 33 x 25 x 3mm at 1.419 kg/ m and mullion ‘J’ section (F4B) of size 46x25x3mm at
2.28kg/m and shutter section of made of F7D of 33x25x3mm at 1.419 kg/m as specified
in IS 7452/1990. Each openable shutter should not exceed a width of 600mm to enable
separate operations and easy maintenance. The panel of the shutters to be covered with
18 gauge cold rolled sheet of superior quality and welded intact with shutter frames The cost includes cost of all materials, labour charges and other incidental charges, etc | 4.32 | m2 | - | - |
| 1.09 | White washing two coats with freshly burnt white shell lime in all floors including
cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete
complying with standard specification and as directed. | 81.24 | m2 | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.48 MB
BOQ_836386.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].