GES/PKT/T-01/2024-25

Amount

Surface Excavation n.exc 30 cm deep and averaging 15cm deep and getting out, in any type of soil complete all as specifed and directed.

Surface dressing n exc 15cm deep and getting out in any type of soil, complete all as specifed and directed.

Excavation in trenches not exceeding 1.5 meter wide and not exc.1.5 meter in depth in any type of soil and getting out, complete all as specifed and directed.

Removal of excavated (Soil) to a distance not exc 50m and depositing where directed at a level not exc 1.5 metre above the starting point all as specified.

Returning, filling in (Soil) including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in any type of soil.

M&L for PCC 1:4:8 type D-2 (using 40mm broken graded stone aggregate) as in foundation, filling and mass concrete, complete all as specifed and directed.

M&L for reinforced cement concrete M-25 (Design Mix) using 20 mm aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specifed and directed.

M&L for reinforced cement concrete M-25 (Design Mix) using 20 mm aggregate in columns, pillars, piers, posts and struts

M&L for reinforced cement concrete M-25 (Design Mix) using 20 mm aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specifed and directed.

M&L for reinforced cement concreteM-25 (Design Mix) using 20 mm aggregate in beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specifed and directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter, Rough finished surfaces of concrete, complete all as specified and directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions, rough finished surfaces of concrete complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), rough finished surfaces of concrete, complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of concrete, complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape, required including cranking, bending, spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified .

M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

M&L for Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:6 complete all as specified and directed.

M&L for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement all as specified.

M&L for 15mm thick plaster in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement, complete all as specifed and directed.

M&L for rendering 10mm thick on concrete in CM 1:3 in facia or edging of chajjas,ceiling and roof projection making the line in true shape finished even & smooth without using extra cement, complete all as specifed and directed.

M&L for preparing the new plaster surface and applying three coats of white wash on ceiling, complete all as specifed and directed.

M&L for two coats of cement base paint over a coat of primer over surface of wall including preperation of the surface, complete all as specifed and directed.

M&L for two coats of white wash over surface of wall including preparation of the surface, complete all as specifed and directed.

M&L for broken stone or boulder hardcore of guage n exc 63mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

S&F machine pressed precast concrete interlocking paver blocks with grey cement and no pigment, any shape and size conforming to IS 15658:2006 of 60 mm thickness M35 grade, complete all as specifed and directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in coping ,PCC block for hold fast including all necessary from work, complete all as specified and directed.

M&L for providing glazed ceramic coloured tiles in vertical surface 450x300mmx7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over 10mm thick rendering in CM 1:4 all as specified.

M&L for Non skid ceramic colour tiles 7 to 8 mm thick ( sq/ rect) area of each tile exceeding 0.11 sqm but not exc. 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:4, complete all as specified and directed.

S&F steel window/ventilator with tubular frame factory made of size 79mm x 39mm, 16 gauge rectangular tubular frame with side hung shutter both for glazed and wire gauge with glazing bars 12x3mm flat iron incl projecting type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 10mm square bar grills complete, including two coats of synthetic enamel paint over one coat of red oxide primer all as specified & as shown on drg No CEPZ/TD-245/01 and 246/02 sheet ½ & 2/2 (excluding glass & wire guage).

S&F pressed steel frame for doors made out of MS sheet 1.25mm thick of size 105x60mm for with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-1 back of chowkhats, complete all as specified and directed.

S&F 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated, fitted to chowkats with two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

S&F MS barrel tower bolt 150mm long,stove enameled black with bright bolt and fixed all as specified

S&F mild steel 125mm long pressed handle oval type stove enameled black ISI marked all as specified

S&F Mild steel sliding door bolts, plate type, stove enamelled black, withk bright bolt not lesss than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 300mm long, complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection finished surface even and fair without using extra cement complete all as specified and directed.

S&F 100mm long butt hinges medium weight cold rolled ISI marked mild steel, complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm prelam PVC sheet used instead of Plain colour PVC sheet and edges will be painted to match with printed sheet reinforced with MS Square tube, suppling & fixing in opening as per specification and drawing. Note : Door frame shall be water proof, termite proof, elegant and should have excellent screw holding strength to fix hinges and hold doors properly for long life)

S&F for Factory Made Solid PVC Moulded Door Shutter wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed.

S&F sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square n.exc 0.50Sqm in each panes complete all as specified and directed.

Providing and laying of water proofing treatment of roof APP (Atactic Polyproplyllen) modified prefabricated five layer 3mm thick water proofing membrane, super thermply non woven polyester mat reinforcement of 160 gsm, weight of membrane @ 3.6 Kg/Sqm over a solvent based bitumen primer @ 0.3 Ltr Sqm by the same manufacturer conforming to IS:3384-1986 & M&L for for providing 10mm thick rendering in Cement mortar 1:4 mixed with WPC 3% by weight of cement on fair faces of concrete, finished even and fair mixed with and including water proofing compound to receive treatment on roof The membrane shall be laid using bitmun torch. The end lap should be 100 mm and the side lap must be minimum 75 mm the membrane shall be first laid up to the parapet wall junction and then shall be overlapped with another membrane (flashing) with an overlap covering up to a distance of 300mm. In case parapet height is less than/ up to 500 mm, membrane shall be terminated at the top of parapet.All rain water pipe opening shall be suitably sealed with the APP membrane all as specified and directed. (The rate includes for filling cracks in existing roof with cement putty using suitable bonding agent (shalcrate 42) before laying cement plaster)

S&F glavanized mild steel wire cloths 0.56mm nominal dia and average width of aperture 1.18mm & fixed with tint tacks or glavinized wire staples complete all as specified and directed.

S&F15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls all as specified.

S&F 20 mm bore Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

S&F angle valve 15mm bore size fancy type cast copper alloy chromium plated complete all as spd & directed .

S&F bib tap15mm bore size fancy type cast copper alloy chromium plated with long shank, complete all as spd & directed .

S&F vitreous china squatting pan, Orissa pattern size 580mm x 440mm with integral foot rest including provision of lime concrete bedding, connection to drain out pipe and to flush pipe, anti-syphonage pipe etc complete all as specified and directed.

S&F PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of 10 Ltr capacity.

S&F, PVC connection 15mm bore size with two nuts and washers of length 450mm all as specified and approved.

S&F 75mm bore PVC floor trap with grating complete all as specified and directed.

S&F for CP Soap Dish fixed with and incl CP screws of as approved by Engr-in-Charge.

S&F rotational moulded polythene water storage tank triple layered (Cylindrical vertical with closed top hoisted fixed in position all as specified capacity of tank 500 ltrs including inlet and out let connections 20 mm air and 15 mm dia GI pipe medium grade, complete all as specified and directed.

S&F 20mm PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified

S&F vitreous china wash hand basin oval shape any size including cutting for and pining in ends of brackets or erecting stand, waste coupling and PVC waste pipe, 32mm dia to be fixed in MS brackets complete all as specified.

S&F of 75mm PVC (SWR) drain pipes 75 mm bore single socketed in any length with rubber ring joint, laid in trenches or in floors, complete all as specified and as directed.

S&F 150 mm dia RCC NP3 pipe laid and jointed complete including providing 100 mm thick cement concrete (1:4:8) type D-2 using 40mm grade stone agg as in bed for pipes incl packing under and huaunching against the sides of pipes after they are laid & tested, complete all as specified and directed.

S&F Vitreous china urinal full stall complete incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and incl 60mm long brass secrews, pointing around urinal in back in cement; fixing automatic cistern with brackts, flush pipe, grating and union for discharge pipe.

S&F 110mm bore, PVC rainwater (SWR) drainage pipes single socketed, in any length with rubber ring joints, fixed to walls with sufficent number of Iron stack clamp complete all as specified and directed.

S&F 75mm bore pipes,PVC (SWR) bends any radius fitting fo PVC (SWR) pipes complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction (single T) equal or unequal jointing with solvent cement complete all as specified and directed.

S&F Towel rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/ plastic cleats (Minimum weight 190gms)

S&F vitreous china wash down water closet (pedestal pattern) white colour including fixing bolts and connecting to drain pipe, including seat cover plastic flat bottom and MS Chromium plated hinging device and connection to flush pipe, anti syphonic pipe etc complete all as specified and directed.

S&F waste pipe for wash basin/ urinal/ sink of required size approved by Engr-in-charge complete all as spcified and directed.

S&F CP health faucet with 1.00mtr flexible tube &hook fixed with and incl CP screws complete all as specified and directed.

M&L for for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillers, window-cills, cooking platforms and like fixed in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S&F pillar tap brass chromium plated fancy type with capstan heads screwed down high pressure with or without lettered hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia, complete all as specified and directed.

S&F stop valve (ISI marked) cost copper alloy fancy type chromium plated, with long shank and cup (concealed type), screwed down, high pressure with crutch or btterfly handle, screwed both ends for item pipe or for unions of 15 mm bore and fixed, complete all as specified and directed.

S&F 9 mm thick frosted toughned glass with sufficient nos of patch stainless steel fitting including all fitting,beadings to hold straight the glass in position complete all as specification and directed by Engr-in-charge/ GE.

M&L for modular point wiring with 1.5 sqmm (nominal area) PVC insulated FRLS and unsheathed multistranded copper conductor cable 1100 volts grade drawn through and including PVC rigid concealed conduit not less than 1.8 mm thick (ISI marked) with all accessories including suitable modular plate (Inner + Outer) and modular metalic boxes of suitable sizes including 1.5 sqmm PVC FRLS insulated unsheathed copper conductor multistranded cable for continuous earth conductor connected to common earth dolly, complete all as specified & directed for the following :- Note:- Proper colour coding is to be followed as per IS Specification.

All as per item No. 71.00 above but for One light point controlled by one switch 5 Amp, SP, one way 240 volts.

All as per item No. 71.00 above but for one 5 pin 6 Amp socket outlet point on independent board controlled by one way switch SP, one way 6 Amp, 240 Volts

All as per item No. 71.00 above but for One Ceiling/ Exhaust fan point controlled by one switch SP, one way, 5 Amp, 240 Volts.

All as per item No. 71.00 above but for One multi pin socket 5 Amp on the same board.

Supply, fixing, stringing and drawing submain wiring with 2 run of single core, 4 sqmm PVC insulated and unsheathed, multi stranded copper conductor cable FRLS using colour code for phase red and neutral black with and including 4 sqmm PVC insulated and unsheathed FRLS conductor multi stranded cable in green colour connected to common earth point and connected to earth dolly drawn through PVC rigid conduit 20 mm bore, heavy grade (ISI marked) with and including all accessories, fixed to surface / recessed for Geyser connection complete all as specified and directed.

S&F Modular switch 1 way 6A,1 module single, ( ISI marked) complete all as specified and directed.

M&L for Modular switch piano flush button single pole one way 15/16 amps 240 Volts with polycarbonate body.

M&L for Modular socket out let, 6 pin 5/6 and 15/16 amps multi purpose 2 in 1 flush type, 240 volts with polycarbonate body.

S&F Modular Socket, 6A - 2/3 pin combined 2 module, (ISI marked) complete all as specified and directed. .

S&F ceiling rose surface bakelite 65 x 50mm, three terminals ISI(Marked) all as specified and directed.

S&F MCB Protected Socket with sheet steel Enclosure single pole 25 Amp with 3 pin plug top for Geyser connection/ AC connection to stabilizer, complete all as specified and as directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

S&F LED Lamp 10 watt B-22 holder base with polycarbonate body and aluminium heat sink warm white complete all as specified and directed by Engineer - in - Charge.

S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube rod 20 watt with polycarbonate diffuser of 4 feet box type made of CRCA sheet and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S&F High performance IP66 LED Street light 20 watt, housing made of die-cast aluminium, with street optic lens,with all accessories and connecting up with and including provision of 3 core flexible copper wire of size 1.5sqmm from ceiling rose, and 20W LED light etc. drawn through and including 32mm bore GI light grade protecion pipe upto 1.0m length with suitable fixing accessories on walls, complete all as specified and as directed, complete all as specified and as directed.

S&F exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers, complete all as specified and as directed.

S&F SPN 8 way sheet metal enclosures factory made DB double door 230 V AC, 50 Hz AC 200 Amp rated bus bar complete all as specified and directed

S&F 240V, 10 KA miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.

S&F amp rating 240V, 10KA, miniature circuit breaker (MCB) of SPN 40 Amp to 63 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

S&F amp rating 240V, 10KA, miniature circuit breaker (MCB) of SP 40 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and installing of the electric water storage heater of ABS body type of 25 ltr capacity with rated power 2 KW, 5 star rated, vertical type, thermally insulated mild steel tank with glass line coating inside the tank alongwith glass lined incoloy heating element with anti corrosive magnesium anode, NRV, thermostate, indicators and temprature adjustable knob including steel braided flexible connection for pipe of size 15 mm dia bore with GI hexagonal adopters/Nuts on the both sides for inlet ( cold water supply) & outlet ( hot water supply) and including provision of wall mounting arrangement and mounding wall with suitable size of anchor bolts with complete connection of water including testing after installation complete all as specified and directed by Engr-in-Charge .

M&L for earthing complete with G .l earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below GL) with top edge of the plate not less than 1.5 m below the normal ground level connected galvanized earth lead wire 4.0 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel including necessary excavation & earth work in any type of soil, removing surplus soil to a distance not exc 50 M, including PCC chamber in PCC (1 : 2 : 4), type B1, using (20 mm graded stone aggregate), mild steel frame made out of angle iron of size 40 mm x 40 mm x 6 mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6 mm thick Cl cover with handle , watering arrangement with funnel internally secured with wire mesh with 20 mm dia light grade GI pipe for watering, 15 mm dia medium grade, Gl pipe for earth wire protection with and including alternate layer of charcoal dust and common salt. complete all as shown in electrical plate No 3 connected to DBs all as specified and indicated including testing on completion.

Supply and laying GI pipe of 25mm bore, medium grade, including fittings laid in trenches complete all as specified and as directed.

M&L for cutting, threading, for insertion of "Tee" for making tapping point of any size of pipe, including provision of flange and tee, excavation and earthwork, at nearby tapping Point for 25 mm GI Pipe Line complete all as specified and as directed.

S&F 25mm dia gun metal gate valve with iron wheel head screwed both ends for iron pipe, complete all as specified and directed.

Supply and laying of cable XLPE insulated armoured heavy duty electric cable with extruded insulation aluminium conductor, 1100 volts grade of cross sectional area 16 Sqmm 4 core.

Supply and laying of cable XLPE insulated armoured heavy duty electric cable with extruded insulation aluminium counductor, 1100 volts grade of crosssectional area 25 Sqmm 4 Core.

Supply and laying of DWC (Double wall corugated) pipe of 80mm bore SN8 laid for protection of cable in trenches, floors, complete all as specified and directed.

Supply, fixing, stringing and drawing submain wiring with 2 run of single core, 6 sqmm PVC insulated and unsheathed, multi stranded copper conductor cable FRLS using colour code for phase red and neutral black with and including 6 sqmm PVC insulated and unsheathed FRLS conductor multi stranded cable in green colour connected to common earth point and connected to earth dolly drawn through PVC rigid conduit 25 mm bore, heavy grade (ISI marked) with and including all accessories, fixed to concealed in walls/floor/ roof, etc complete all as specified and directed. Notes: (i) 2 run of 6 sqmm cable, one run of 6 sqmm earth cable and one run of PVC conduit shall be measured as 1Rm (ii) Separate conduit shall be used for each submain wiring circuit irrespective of numbers of wire

Supply, install, commissioning and testing of commercial Air curtain unit for prevention of dust and conditioned air losses, single phase, 220 V, 50 HZ, made out of MS/ CRCA sheet of minimum thickness 18 gauge finished with two coats of red oxide primer and final coat of synthetic enamel paint (oven baked) with MS - CRC 18 gauge square perforated suction grills, Aluminium alloy fans and single phase electric motor, nozzles etc, automatic megnetic sensor with controller complete with fittings and accessories so as to produce 1 - 1.5 m/sec air velocity at floor level for door opening size 64" x 84" complete all as specified and as specified.

S&F 12 mm thick toughned glass including all necessary fitting,beadings to hold toughned glass straight in position along with provision of making holes in the glass complete all as specified and directed by Engr-in-charge.

S&F automatic motion sensor door with clamp, hanger,anti drop device,anchor units,roller belt,sliding arrangements, belt connector fitting,motor & including all necessary fittings as required the capacity of the motor should be suitable for handling weight upto 200kg/ door, single phase, 230v with width of opening of the door upto 2.00 meter with adjustable openable opening and closing speed completely installed along with toughened glass to detect motion from both sides complete all as specified and directed by Engr in charge. (Make : DORMA/ MODI GAURD or other equivalent.) Note : Toughened glass will be measured & paid separately under relevant item.

Supply, installation, testing & commissioning of Variable refrigerant flow type air- conditioning system suitable for Cooling and Heating by inverter driven capacity control compressor complete with indoor and outdoor units with individual controller and with fittings etc., as per quantity given below including full charging of R410A refrigerant gas complete with duly powder coated and Outdoor unit. (Make : Blue star/ Voltas/Carrier)

Outdoor Units

Capacity 12 HP (Make : Blue star/ Voltas/Carrier)

Capacity 10 HP (Make : Blue star/ Voltas/Carrier)

Indoor Units (Nominal Capacity)

Cassette unit 2.0 TR (Make : Blue star/ Voltas/Carrier)

Cordless Remote

Refnuts

S&F Interconnecting refrigerant pipe and work with (19 mm / 13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported with MS hanger. (Make:- MAXFLOW/ MANDEV/ RAJCO/TOTALLINE/MPCL/A FLEX/K FLEX) 54 mm O.D (insulation : 19 mm) 41.3 mm O.D (insulation : 19 mm) 38.6 mm O.D (insulation : 19 mm) 34.9 mm O.D (insulation : 19 mm) 31.0 mm O.D (insulation : 19 mm) 28.6 mm O.D (insulation : 19 mm) 22.2 mm O.D (insulation : 13 mm) 19.1 mm O.D (insulation : 13 mm) 15.9 mm O.D. (insulation : 13 mm) 12.7 mm O.D. (insulation : 13 mm) 9.5 mm O.D. (insulation : 13 mm) 6.4 mm O.D. (insulation : 13 mm)

S&F GI Perfortaed cable tray 16G in 150 x 25 x 1.6mm size with necessary hardware & rubber gasket & clamps for copper piping & cable etc as reqd, complete all as specified and as directed.

S&F Drain Piping rigid PVC piping for the following size complete with fittings, supports as per specifications and duly insulated with 6mm thick closed cell nitrile rubber insulation:-

32 mm dia

25 mm dia

S&F Control cum transmission wiring of 2 core x 1.5 sqmm copper in suitable conduits between indoor and out door unit, complete all as specified and as directed.

Refrigerant charging for above item No 104 (Make:- Honeywell/ MPCL)

S&F of Inter connecting cable 4 sqmm 3 core between indoor and outdoor units for complete all as specified and as directed.

S&F VTPN DBs Double Door 4 way suitable for MCCB 100 amp incomer, IP 43 protection 415 V AC, 50 Hz AC appropriate size of bus bar and neutral link complete all as specified and directed.

S&F MCCB 100 Amp 415V 16KA 3 pole in the DB complete with connection testing and commissioning complete all as specified and directed.

M&L for earthing with steel earth plate electrode of size 60cmx60cmx6mm thick buried directly in ground to a depth not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr deep below normal ground level connected to galvanized iron strip of size 32x6mm as earthing lead by means of nuts, bolts and washers of steel after welding of GI strip to earth electrode to the full length of earth plate, GI medium grade pipe 40 mm bore protection pipe upto test point, 20mm dia GI light grade watering pipe with funnel and wire mesh, RCC pit cover of size 300x300x40mm reinforced with XPM having weight not less than 4Kg/sqmm including 6mm thick MS bar handle made to shape, PCC pit with 1:3:6 type C1 with angle iron frame made of angle iron of size 40x40x4mm, adequate qty of charcoal dust and salt layers all around the earth plate, excavation , earth work in any type of soil, removal of excavated soil and returning filling in all as required at site complete all as specified in plate No 3 of SSR Part-I and all as specified or indicated including testing on completion.NOTE :-Rates inclusive of necessary excavation in any type of soil, earth work, PCC pit, RCC cover, funnel with watering pipe, GI earth strip upto 7.5 m long for connecting to test point etc. all as required at site for complete earthing).

S&F UPS Capacity of 20 KVA 3:3 online for 30 min back up Three phase AC input 300 to 450V Out put - 415 V ± 1%, Frequency 50 Hz, Power factor > 0.99, safety - CE,RCM ( IEC62040-1,IEC6240-2 Class C2 ), Eficiency AC - AC is >96 %, Maximum inbuilt battery charger current 15 A, Operating Temperature - 0 to 40 degree celcius, Protection - IP 42 complete all as specified and as directed.

S&F 42 AH 12 volts sealed maintenance free Battery for UPS complete all as specified and as directed.

S&F Rack and Battery interlinks Uninyvin cable fire proof MS Rack NA suitable for above item No 114 & 115 complete all as specified and as directed.

S&F industrial change over switch gear 100 Amp 415 V Four Pole On Load Side Handle Operated In Sheet enclosure, Powder Coated, Weather proof conforming to IS: 13947 by connecting the electrical connection and fixing on wall or panel with clamp nut, bolt etc complete all as specified and as directed by Engr-in-Charge.

M&L for good quality dry sand cushioning to under ground electric cable on layer of 8 cm thick before laying the cable and second layer of 15 cm thick after laying the cable all as specified in clause 19.75 of MES Schedule part-I (2009) Note : Sand shall be fined as specifed and punned thickness shall be measured and paid.

Supply and laying sub class 'B' bricks of old size (230x115x75 mm) or of size locally available, laid along alignment of cable as protection to cable in trenches complete all as specified and directed by Engineer-in-Charge

Note: In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account.

kailu construction co (BID ID -3082702)

M/S MS ENTERPRISES (BID ID -3080672)

M/S J N TRADERS (BID ID -3080626)