E.I work incl A.C.

&Õ
Distribution wirin

Supply & Fixing bakelite / perspex top cover on existing switch board by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required for following.

200 mm x 150 mm x 65 mm

240 mm x 200 mm x 65 mm

240 mm x 240 mm x 65 mm

Supplying & Fixing CRC sheet metal (16 SWG) JB-cum- Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. bakelite/Perspex/coloured Perspex (wall matching colour) top cover 3 mm thick flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works.(Make:Anchor)

175 mm x 100 mm x 65 mm

200 mm x 150 mm x 65 mm

240 mm x 200 mm x 65 mm

Supply & Fixing 240 V 6 A Piano key type switch (Make:Anchor) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite /perspex cover and making necessary connections as required.

Supply & Fixing 240 V 16/20 A Piano key type switch (Make:Anchor) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing 240 V, 6A plug socket (Make:Anchor),without switch & plug top, on existing sheet metal switch board with bakelite/perspex top cover by screws after making housing for plug by cutting bakelite/perspex top cover and making necy. connections with PVC wire and earth continuity wire etc.

Supply & Fixing 240 V, 20 A plug socket (Make:Anchor), without plug top and switch, on existing sheet metal switch board with bakelite/perspex top cover by screws after making housing for combined plug switch by cutting bakelite/perspex top cover and making necy. connections with PVC wire and earth continuity wire etc.

Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Make:Anchor) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Make:Anchor) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/ perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing 240 V, 2 nos. 6A, plug socket with separate 2 nos. 6 A Piano key type switch, (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 175x100x65mm MS (16SWG) switch board and Bakelite/Perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting Bakelite/Perspex cover and making necessary connections as required.

Supply & Fixing 240 V, 2 nos 20A, plug socket with separate 2nos,20 A Piano key type switch (Make:Anchor) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Make:Anchor) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing 240 V, 3 nos. 20A plug socket with separate 3 nos. 20A Piano key type switch, indicator & 20A switch type SP MCB (Make:Anchor) on sheet metal switch board embedded in wall incl. S & F 300x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (North West/Crabtree/Approved make), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, Modular type starter (North West/Crabtree/Approved make) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling.

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Supply & Fixing Socket type fan regulator (Step type) (Anchor) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.

Fixing exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:

Supply & Fixing only louver shutter/cowl on wall with necy. bolts & nuts (6 mm dia x 62 mm long).

Fixing only cabin fan on wall by S&F of 16'' x 14'' x 3/4'' size of good quality Wooden block (as per direction of EIC) by at least 6 nos 4'' anchor bolts, nuts & washers or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length.

Distribution wiring in 1.1 KV single core stranded 'FRLSH' PVC insulated & unsheathed copper wire (Havells/Gloster/Polycab/KEI) in suitable size PVC rigid conduit 'FR' (Precision/Polycab make, MMS/HMS type) incl. necy. fittings as required.

2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC.

Finishing of the PVC insulated wire ends by socketting (Dowels) with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

Supplying and fixing PVC Rigid Conduit 'FR' (Precision/Polycab make, MMS/HMS type) on wall, ceiling with saddles and other accessories as required and mending good damages to building works.

20mm size

Supply & Delivery of 240V, 18/ 20 W LED Tube (Polycarbonate with heat sink) with glare free light distribution with CCT (5000K-6500K) having minimum luminous efficiency of 100 Lm/ Watt or better & 50,000 LED burning hours or more. [Make- Philips/ Wipro/Lighting Technology/ manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification]

Supply and Delivery of 4 feet Industrial box type Single LED tube batten/ mounting rail (rust free) suitable for double TLED lamp. [Make- Philips/ Wipro/Lighting Technology/ manufacturer with own NABL accredited lab with valid test certificate]

Supply and Delivery of 4 feet Industrial box type double LED tube batten/ mounting rail (rust free) suitable for double TLED lamp. [Make- Philips/ Wipro/Lighting Technology/ manufacturer with own NABL accredited lab with valid test certificate]

Supply & Delivery of 220V, Single Phase, 50 Hz A.C heavy duty exhaust fan of following sizes having complete metal body. 225 mm (9"), 4 Blade, RPM ≤ 1400 , Wattage ≤ 45 Watt, Sound level ≤ 49 dB, Air Displacement (In CMH) ≥ 440 . (Make- EPC/ USHA/Orient/CROMPTON) [ISI mark, IP55 rated]

Supply & Delivery of 220V, Single Phase, 50 Hz A.C heavy duty exhaust fan of following sizes having complete metal body of 300 mm (12"), 4 Blade, RPM ≤ 1420 ,Wattage ≤ 90 Watt, Sound level ≤ 56 dB, Air Displacement (In CMH) ≥ 1120 (Make- EPC/ USHA/Orient/CROMPTON) [ISI mark, IP55 rated]

Supply & Delivery of 230V, 50Hz, 450 mm sweep heavy duty full metal body wall bracket fan having wattage ≤ 90 Watt, RPM ≤1350, Air Displacement (In CMH) 100 complete with all accessories.(Make - Orient/Crompton/ EPC) [BEE star rated]

S&D 48″ sweep,230V 1-Ph. AC ceiling fans incl. all accss.(Make- Crompton / Usha / Orient) [BEE star rated]

Supply & Delivery of 240V 9 Watt LED lamps of following wattage with glare free light distribution having minimum luminous efficiency of 100 Lm/ Watt or better & 50,000 LED burning hours or more. [Make- Philips/Wipro/Lighting Technology/ manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification]

Charges for Installation, Testing & commissioning of existing Timer DB by using screw washer and own tools tackles after completion of civil renovation work with complete interconnection as required as per direction of EIC.

S & F Timer Control Unit for Air conditioner machine with following accessories:- i) 2+12-way SPNDB Box (Legrand/L & K)-1 no. ii) 25A DP MCB (Legrand/L & K)-1 no. iii)Digital 24 hour time switch (Make-GIC) -1no. iv)25A 2-pole contactor (L&K: MNX22/230V)-1no. v)Melamine terminal block-2 nos. vi)LED indicating lamp (L&K: SIL R 240V)-2 no. vii)2X4sq.mm+2.5sq.mm copper wire -2 mtr. viii)1.5sqmm copper wire-3 mtrs. ix) 3 way ON-OFF-ON toggle switch -- 1 no. x) cu socket of 4/2.5/1.5 sq mm -- L.S xi) Single Phase AC starter (cat no-C 12M01 H) xii) Ammeter- 01 (Make-L&K/ABB/Crabtree) with complete interconnection as required as per direction of EIC.

Installation, testing and commissioning of 1.5 Tr window AC including 2" shawl wood frame and GI tray with proper fixing arrangement after cutting the grill & sliding window and mending good the damages as required by site condition & as per direction of EIC.

Installation, testing and commissioning of 2.0 TR Capacity R410A Ref Gas split air conditioner with iron braket (power coated) including initial charging of cooling agent R410A gas and all necessary fittings and fixtures ,angle support etc. as required by site condition.

Supply and fixing of copper refrigerant pipe line with insulation tube heavy quality black nitrail rubber and cotton tape for inter-connecting indoor & outdoor unit as following size : 5/8" or 15mm dia copper pipe as per direction of EIC.(Make:Rajco/Royku/Approved make)

Supply and fixing of copper refrigerant pipe line with insulation tube heavy quality black nitrail rubber and cotton tape for inter-connecting indoor & outdoor unit as following size:1/4" or 6.35mm dia copper pipe as per direction of EIC.(Make:Rajco/Royku/Approved make)

S & Laying of PVC drain pipe.(Supreme/Oriplast/Approved make)

S&F of 25 mm heavy type (40 Grade) UPVC pipe with necessary elbows,connector,solvent cement & clamps. (Make:Supreme/Oriplast/Approved make)

Supply and fixing of MS bracket for AC machine outdoor unit.

Supply & drawing 3 core 2.5 sq. mm. P.V.C. insulated copper wire for connecting the Power hub to Outdoor unit supply.[Make Polycab / RR /KEI/ Havells/ Gloster as approved by E.I.C]

Supply & drawing 4 core 1.5 sq. mm. P.V.C. insulated wire for connecting the outdoor to indoor supply.[Make Polycab / RR /KEI/ Havells/ Gloster as approved by E.I.C]

Hiring charges for scaffolding arrangement including dismantling at the end of work and carriage, for ODU and Structure installation, per storey of building per vertical run.

Defect Liability Period - 1 One) year after completion of work

Make & model of each and every material to be approved by EIC