SPECIAL REPAIR TO STATION AUDITORIUM BLDG No 202 AT AF STAION MEMAURA

Amount

M&L for 15mm thick rendering in cement mortar 1:4 with water proofing compound on other than fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete including taking down cement plaster all as specified & directed.(Note- WPC shall be measured and paid separately)

Supply only water proofing compound complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement including taking cement plaster all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:4 as in ceiling finished even and smooth without using extra cement including taking down cement plaster all as specified and directed.

M&L for complete removal of existing treatment of any description from old plaster surfaces of external wall and applying two coats of exterior emulsion paint white or tint over a coat of 2 mm average thickness wall care white putty on walls/ chajja/ facias/ fins for achieving smart periodical services by machine application, complete all as specified and directed.

M&L for preparation of newly plastered external wall surfaces and applying two coats of exterior emulsion paint white or tint over a coat of 2 mm average thickness wall care white putty on walls/ chajja/ facias/ fins for achieving smart periodical services by machine application, complete all as specified and directed.

M&L for complete removal of existing treatment of any description from old decorated surface of internal wall and applying two coats of oil bound distemper over a coat of 2 mm average thickness wall care putty for achieving smart periodical services by machine application, complete all as specified and directed.

M&L for preparation of newly plastered internal wall surfaces and applying two coats of oil bound distemper over a coat of 2 mm average thickness wall care putty for achieving smart periodical services by machine application, complete all as specified and directed.

Material & labour for preparing newly plastered surfaces of ceiling and applying two coats of oil bound distemper over priming coat of chalk whitining as preparatory for achieving smart periodical services by machine application, complete all as specified and directed .

Material & labour for preparing old decorated plastered surfaces of ceiling and applying two coats of oil bound distemper over priming coat of chalk whitining as preparatoryfor achieving smart periodical services by machine application, complete all as specified and directed .

Dismantling timber scantling 40 sq. cm and over in section, in any position all as specified and directed .

Dismantling of wall and ceiling boads ( fibre, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness including cover fillets all as specified and directed .

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per manufacturer's specification & drawing as directed.

S&F solid PVC wall lining consisting of 5mm thick Plain colour PVC sheet including solvent cement for fixing at site on PVC frame as per manufacturer's specification complete all as specified and directed.

S&F 'APHONY GLOSS' 15 mm thick tiles in ceiling as required height including scaffolding/props and without dismantling of fitted sitting chair/dismantling /re-fitting/damage of chair solely rest on contractor for repair/replacement, made of Wood Fibre 1mm width cement composite (Non Magnesite Bonded) covered with Acoustically Transparent Absorptive micro fibres on the front side with an option of colors as per choice of size 595x595mm highly recommended for ceilings, has excellent noise absorption of 0.85 NRC as per ISO 354/ASTM 423C, meets stringent Fire Ratings ASTM D-876 and BS : 476 weather resistance as per IS 3308,Thermal Conditivity result 45 w/m2/K as per IS:3346-1980 with relative humidity of 90% RH at 60 degree Celcius (140 Farenhite) for 15 days =No deterioration, installed on T24 grid system of 0.6mm thick, Main 'T' length minimum 3000mm, web minimum 35mm to be placed at 600mm centre to centre and secondary cross 'T' of length 600mm,web minimum 35mm, inter locked, wire support for main T to be taken at every 1200mm length wise and 600mm width wise, specially designed for Acoustic Vibration management and long life with a backing 50mm 1000GSM thick absorb wool tested as per Fire Retardent ASTMD 635-1991-2002,thermal conductivity test,W/mk-as per ASTM C 518 test result (SC-6490)-0.03312 for excellent results all as per specified and directed. (Make :- Himalayan Acoustic/Baux/Heradesin or equivalent make specified in appendix 'B' to particular specifications)

S&F 'APHONY GLOSS' tiles in wall as required height including scaffolding/props and without dismantling of fitted sitting chair/dismantling//re-fitting/damage of chair solaly rest on contractor for repair/replacement, made of Wood Fibre 1mm width cement composite (Non Magnesite Bonded) covered with Acoustically Transparent Absorptive micro fibres on the front side 20mm thick with an option of colors as per choice of size 600x1200mm, has excellent noise absorption of 0.9 NRC as per ISO 354-1985 and ASTM 423-90a, STC of 47 as per ASTM E90/413 for 25mm, Density 400 Kg/m3,meets stringent Fire Ratings ASTM D-876,and BS : 476, weather resistance as per IS 3308,Thermal Conditivity result 45 w/m2/K as per IS:3346-1980 with relative humidity of 90% RH at 60 degree Celcius (140. Farenhite) for 15 days =No deterioration, Conforms to En 13168-2001 and are RoHS Complaint, installed with Aluminium H Profile on G.I. studs 600x600mm centre to centre 2400mmx50mm web thickness 0.5mm,flanges 15 & 50mm fully knurled giving it high strength,hot dipped galvanised steel with 120 GSM zinc coating specially designed for Acoustic vibration management and long life with a backing of 50mm 1000GSM thick absorb wool tested as per Fire Retardant ASTMD 635-1991/Insulation and IS 15061-2002,thermal conductivity test,W/mk-as per ASTM C 518 test result (SC-6490)-0.03312 for excellent results all as per specified and directed. (Make :- Himalayan Acoustic/Baux/Heradesin or equivalent make specified in appendix 'B' to particular specifications)

Excavating in post holes (or similar holes) soft/loose soil, each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed

M&L for cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed

S & F steel work in tubular trusses as vertical and raft suqae hollow tube,purlin tubulor including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St-240 for vertical and raft/purlin drilled for fixing of steel sheeting or other covering etc. including cutting,welding,bending, complete all as specified and directed.

S&F Joist, channel, angle,flat iron, or tee sections, fixed independently or as frame resting plank/base without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) including cutting,welding, bending etc complete all as specified & directed.

S&F mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment including cutting,welding etc complete all as specified & directed.

M&L for preparation of new surfaces of steel of any description and applying two coats of synthetic enamel paint over a coat of red oxide by spray painting machine, complete all as specified & directed.

Supplying & fixing 30mm thick 2nd class hardwood planks n.exc 30cm in width and 2.4mtr in length on stage surface suitably fixed on angle frame or wood frame including necessary SS screws,nails etc complete all as specified and directed.

M&L for preparation of new surfaces of wood of any description , not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Taking down of wooden chowkats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified and directed .

Supplying & fixing factory made 100% solid wood polymer composite (WPC) Door Frame 125mmx65mm made from wood polymer composite ( Single Extruded Procees) material with density 780kg/cbm & manufactured by Rajshri Plastiwood,Pithampur (MP) an ISO 9001-2015 Certified Company, complete all as specified and directed.

Supplying & fixing factory made 100% solid wood polymer composite (WPC) Door Shutter 35mm thick solid plain of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade),calcium carbonate and natural fibers ( Wood powders/rice husk/wheat husk) and non toxic additives,made from Extrusion procees WPC foam sheet single Extruded (Inner) with density not less than 6.50 kg/cbm manufactured by Rajshri an ISO 9001-2015.Certified Company having good screw holding capacity ( Screw Withdrawal strength of 2000N (Face) & 1100N (Edge),Minimum compressive strength of 50 N/mm2.Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with property of being Termite/Borer Free. Water/moisture proof,Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, complete all as specified and directed.

S&F 300mm long ISI mark aluminium anodized sliding door bolt, plate type, stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified & directed.

Supply & fix mild steel butt hinges medium weight 100mm long complete all as specified and directed .

S&F aluminium tower bolts 150mm long, of extraded section complete all as specified and directed.

S&F 150mm long aluminium handles cast type anodized, complete all as specified and directed.

S&F factory made uPVC white colour Two track/Three track two panels sliding window above 1.50 m height made of (big series) fram 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 + 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of window above 2.50 sqm. upto 4.00 sqm.) comprising of uPVC multi?chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle on one side of extreme panel along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) touch lock with hook (if required for wire mesh panel), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), GI fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed. (Note-Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.

S&F 4.8 mm thick tinted glass n exc 0.5 Sqm in each pane of approved make and colour complete all as specified and directed

S&F stainless steel wire cloth 0.36mm nominal dia of wire and avg width of aperture 1.40mm fixed with tinned tacks or stainless steel wire staple all as specified and directed.

S&F aluminium XPM Jali (Grill) of expanded metal n.exc 1 kg/sqm, cut to length,bent to shape required and fixing with galvanised steel staples fixed aluminium frame etc complete all as specified and directed by Engr-in-Charge.

S&F in repair 25mm Dia stainless steel curtain rod with two Nos of knob and with stainless steel brackets complete all as specified and as directed.Note:- Each curtain rod shall be 60 cm extra long to the size of clear opening.The each curtain rod will be minimum 750 mm and maximum 2.40 mtr leangth.

M&L for 300 x 600 x 7 mm thick joint free Glazed ceramic coloured tiles(premium quality) incl dark shade border/heighlighter in dado/skirting set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 10mm thk in cement mortar 1:4 complete including dismantling, complete all as specifed & directed.

M&L Non skid ceramic coloured tiles joint free 7-8 mm thick (Square/ rectangular) area of each tile exceeding 0.18Sqm in floors set and jointed in neat cement slurry and pointed with white or cement to match over and including 15mm screed bed in cement mortar 1:6 including dismantling of floor hearth or wall tiles complete all as specifed & directed.

M&L vitrified Ceramic light shade tiles 10mm thick (square/rectangular)polished,area of each tiles not exceeding 0.42 sqm,in floors and skirting including 15 mm thick screed bed 1:6 in CM and dismantling of floor hearth or wall tiles etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specifed & directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for all as specifed & directed.

Excavating in trenches n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out, in soft/loose soil, complete all as specifed & directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, complete all as specifed & directed.

Use & waste formwork to sides of pillars, posts, struts, piers, columns and stanchions, fair finished surface complete all as specifed & directed.

Use & waste formwork to sides and soffits of floor or roof beams, beam haunch?ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, et fair finished surface complete all as specified and directed.

Use & waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work including props etc complete; not exceeding 200mm thick (Horizontal or sloping) fair finished surface all as specified and directed.

M&L for reinforced cement concrete M-25 Design mix for beam, cantiliver slab bressummers, lintels over 1.5m span all acomplete all as specifed & directed.

M&L for reinforced cement concrete M-25 Design mix for columns,pillars, piers, post and sturts etc. complete all as specifed & directed.

S&F mild steel bars TMT 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. complete all as specifed & directed.

S&F mild steel bars TMT 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. complete all as specifed & directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specifed & directed.

Material & labour for 75 mm thick PCC 1:3:6 type C-1 (using 40mm graded stone aggregate) as in plinth protection/Path paving surface finished even and smooth without using extra cement complete all as specified and directed .

Supply & fix in repair of vitreous china squatting pan ‘Orrisa pattern’ size 580 x 440 mm white with integral foot rest including replacement of ‘P’ or ‘S’ trap lime concrete bedding and making good floor complete all as specified and directed.

Supply & fix in repair of vitreous china wash down water closet pan(Pedestral pattern) white including all fitting complete all as specified and directed.

S&F in repairs Vitreous China bowl urinal Half stall type,white, with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specifed & directed. Make: Hindware/Parryware/Johnson

Supply & fix in repair vitreous china wash hand basin, white size 450x325 mm including brackets, CP waste coupling &PVC waste pipe of 32 mm dia complete all as specified and directed.

S&F in repair 15mm bore pillar taps brass chromium plated, screwed down, high pressure with or without lettered hot or cold with long screwed shanks and fly nuts, screwed to iron pipe, fixed in repairs complete all as specified & directed.

Supply and fixed PVC low level flushing cistern 10 Ltr capacity dual flushing white with inlet , ball valve, float and handle incl brackets incl 32 mm dia PVC flush pipe for low level cistern fixed as in repair complete all as specified and dircted.

Supply & fix in repair 15 mm dia angle stop cock fancy type CP screwed down high pressure with crutch or butterfly handle, flench screwed both ends for iron or for union complete all as specified and directed .

Supply & fix in repair long body bib taps brass cromium plated fancy type 15 mm bore size screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed

Supply & fix in repair short body bib taps brass cromium plated15 mm bore size screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs PVC connection with CP brass nuts 600 mm long all as specified and directed.

S&F 110mm/125mm PVC(SWR) Gully Trap setting and jointed with solvent cement complete all as specified and dircted.

S&F in repair brass chromium plated towel rail 600 mm long, 20mm dia of a approved quality, complete all as specified & directed.

S&F grating of stainless steel of 100mm dia complete all as specifed & directed.

M&L for 17/ 18 mm medium density fibre(MDF) board exterior grade fixed to timber framework with screws both side prelaminated with one sidedecorative choice laminations and other side balancing white lamination fixed to timber frame work including beading complete all as specifed & directed.

S&F of continous piano hinges mild steel bright finished width of flaps 30mm while open, complete all as specified and directed.

S & F powder coated 40mm dia cap board nobs fixed with nut screw & washer of mild steel bright finish all as specified and directed.

S&F powder coated hasp and staple 125mm long aluminium anodised complete all as specified and dircted.

Taking up or down steel tubing and connection 15 mm bore pipe and removing from site complete all as specified and directed .

Taking up or down steel tubing and connection 20 mm bore pipe and removing from site complete all as specified and directed .

Supply & fix 15 mm bore GI tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed .

Supply & fix 20 mm bore GI tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed .

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed .

M&L for Granite of required quality (of any type ) tiles machine cut,in skirting/dado laid over cement screed, shade border/heighlighter in dado/skirting set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm thk in cement mortar 1:4 complete all as specifed.

Removing of demolished building material and shifting it to distance up to 1.0 Km at abandoned oxydation pond near STP complete all as specified & directed.

S&F in repair 110mm PVC (SWR) pipe single socketed including Bend in any length with rubber ring joints fixed to wall/ laid under floor etc in waste pipes and rain water pipes incuding PVC Tee ,socket,elbow,clamp etc complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed .

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed .

M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, with grey cement and no pigment. complete all as specified and directed .

M&L for brick work with sub- class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius using sub class 'B' bricks built in cement mortar 1:6, including demolition of old brick work built in cement mortar, complete all as specifed & directed.

S&F welded steel wire fabric exc 3.0 Kg per Sqm but n.exc 4.0 Kg per Sqm fixed to wood or steel members including dismantling of any thickness fixed with steel or wood fillet etc.complete all as specified & directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

Refixing (except sheeting any thickness) of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete,(fittings such as switches, ceiling roses,pendants, regulators sockets etc. to be measured separately), removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Taking down wall fan of any size and capacity carefully and shifting to store for keeping in safe custody and refixing the same to the location after new point wiring, making good the disturbed surface of wall, complete all as specified and directed.

M&L for point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including heavy duty drawn through and including in PVC rigid conduit 'medium grade' with all accessories complete concealed in wall/roof/floor etc, ISI marked with,including steel box of required module for fixing of modular switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light/ fan/bell point controlled by one, one way switch complete all as specified and directed .Note:- Modular switch / sockets etc shall be measured & paid separately).

All as per description under serial No. 90 above but for one light point/fan point controlled by one switch, one way switch complete all as specified and as directed.

All as per description under serial No.90 above but for one 3 pin socket outlet 5 Amps on the same board with other switches complete all as specified and as directed.

All as per description under serial No.90 above but one 3 pin socket outlet 5 Amps on independent board complete all as specified and as directed.

M&L for point wiring using for Socket outlet 2 in 1 5/15 Amps on independent board, approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor 2.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including heavy duty drawn through and including in PVC rigid conduit with all accessories complete concealed in wall/roof/floor etc, ISI marked with,including steel box of required module for fixing of modular switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 2.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light/ fan/bell point controlled by one, one way switch complete all as specified and directed .Note:- Modular switch / sockets etc shall be measured & paid separately).

Supply and fixing Modular Switch one way 6 Amps 1 module, 240 volts AC including suitable modular plate and metal box, complete all as specified & directed.

Supply and fixing Modular Socket, 6A - 2/3 pin combined 2 module, 240 volts AC including suitable modular plate and metal box, complete all as specified & directed.

Supply and fixing Modular Socket combination 2 in 1, 3 pin 6 & 16 Amps 3 module, controlled by one switch, 240 volts AC including suitable modular plate and metal box, complete all as specified & directed.

Supply and fixing ceiling rose, 65 x 50 mm, three terminals, polycorbonate, isolated body, complete all as specified and as directed.

M&L in replacement sub main wiring alongwith earthwire for two single core 2.5 sqmm size sub main wiring with one single core 2.5 sqmm size earthwire drawn into and including one run 25 mm or higher dia PVC conduit fixed concealed. PVC insulated PVC unsheathed multi-stranded copper conductor cable FRLS in and including PVC conduit medium grade ISI marked, fixed concealed of size as mentioned below complete with all conduit all accessories / fittings as required at site and connecting of earthwire to common earth dolly complete all as specified and directed. Note :- Three run of 2.5 sqmm copper cable and one run of conduit shall be measured as one unit.

M&L in replacement sub main wiring alongwith earthwire for two single core 6.0 sqmm size sub main wiring with one single core 6.0 sqmm size earthwire drawn into and including one run 25 mm or higher dia PVC conduit fixed concealed. PVC insulated PVC unsheathed multi-stranded copper conductor cable FRLS in and including PVC conduit medium grade ISI marked, fixed concealed of size as mentioned below complete with all conduit all accessories / fittings as required at site and connecting of earthwire to common earth dolly complete all as specified and directed. Note :- Three run of 6.0 sqmm copper cable and one run of conduit shall be measured as one unit.

S&F in replacement MCB DB sheet metal enclosure double door 12 way, single pole and neutral, 240/415 volts, AC 50 Hz supply, with 200 Amps rated copper bus bar and IP-42 protection with the in built bus bar link, each bus bar and DIN Rail (separate space incomer isolator/MCCB) and flush to wall including all cutting on wall and making good to match the existing disturbed surfaces complete all as specified and directed.

S&F in replacement MCB DB sheet metal enclosure double door 8 way, single pole and neutral, 240/415 volts, AC 50 Hz supply, with 200 Amps rated copper bus bar and IP-42 protection with the in built bus bar link, each bus bar and DIN Rail (separate space incomer isolator/MCCB) and flush to wall including all cutting on wall and making good to match the existing disturbed surfaces complete all as specified and directed.

S&F MCB Single pole Neutral ‘C’ Curve, 240 volts, 10KA, 40 Amps complete all as specified and directed .

S&F MCB Single pole Neutral ‘C’ Curve, 240 volts, 10KA, 32 Amps complete all as specified and directed .

S&F MCB single pole 6 to 32 Amps, 'C' curve 240 volts, complete all as specified and directed .

Supply and fixing in replacement LED luminaire 600mmx600mm 36 watt 220 volts AC, surface mounted type with high efficiency PMMA diffuser soft glare free light complete with driver, holder and LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.

Supply and fixing in replacement recess mounted down light 15 watt 220 volts AC with high efficiency long life COB LED warm white light complete suitable for roof ceiling including connecting with three core copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.

Supply and fixing in replacement LED luminaire 300mm x 300mm 15 watt 220 volts AC, surface mounted type with high efficiency PMMA diffuser soft glare free light complete with driver, holder and LED lamp suitable for roof ceiling including connecting with three core copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.

Supply and fixing in replacement LED flood light fitting 36 watt 6500K, 220 volts AC, outdoor type with thermal management in multiple optics and equipped with IP-66 protection, with impact and corrosion resistant complete with driver, holder and lamp including connection with three core copper conductor cable of suitable size, complete all as specified and directed.

Supply and fixing Rectangled shape LED step light 3 watt2700K, 230 volts AC, wall mounted type, complete all as specified and directed. (Make- Wipro/Havells/Bajaj)

Supply, Installation and fixing auditorium in house double sided sinage light complete in all respect fitted at entrance and exit gate, toilets, green room, cafeteria etc, complete all as specified and directed. (Make- Bajaj Cat Part No.BESL 03 LED DSD WBB Green or equivalent model in Havells or Wipro)

S&F in replacement LED bulk head light 10 watt 230 volts AC, indoor type, 2700K including all necessary connection, complete all as specified and as directed

Supply and fixing in replacement LED building security light fitting 20 watt 6500K, 230 volts AC, outdoor type powder coated PPC aluminium LED light fitting having Ingress protection class IP-65, with high power LED complete with 32 mm bore GI pipe light grade bracket 1.5 mtr long bent to shape including 02 nos mild steel flat iron 25x5mm clamp with nut, bolts & washers etc. including conection with three core copper conductor cable of suitable size, complete all as specified and directed.

S&F LED strip lights 400 lu/m output, having IP-65 rating, warm white (3000K) colour temp, complete all as specified and as directed

S&F modular Switch one way 16 Amps 1 module, 240 volts AC including suitable modular plate and metal box, complete all as specified & directed.

Supply and fixing Bi-directional LED symmetric beam outdoor wall lights, 2x6 watt 2700K, having IP-65 rating, complete all as specified and directed. (Make- Wipro Cat Part No DW11227 or equivalent model in Havells or Bajaj)

Rakesh Traders

MRITUNJYA ASSOCIATES

Ashirwad Contractor and Supplier