REPAIR/REPLACEMENT OF EXISTING ROOF TREATMENT AND CONNECTED B/R REP WORKS IN OTM ACCN UNDER ZONE-I AREA AT JAIPUR MIL

Amount

M&L padding in PCC 1:2:4 type B-0 (using 12.5mm size graded stone aggregates) laid to average consolidated thickness of 50mm to provide a finished slope of 1:30 finished even and smoth without using extra cement.

M&L scrapping roof surface with wire brushes and washing with water etc including taking down old cement plaster, PCC of any thickness, description in any situation, position and roof treatment any type for making good to receive new roof treatment any type and removal of same from site to outside of MOD land complete all as specified and directed.

M&L screed bed or bedding layer of 15mm thick in CM 1:6 for laying floor finishes in roof mixed with water proofing compound @3% by weight of cement even and smooth without using extra cement. Note :- WPC shall be measured and paid seprately as supply Only.

M&L painted cement plastered surfaces with one coat of cold applied bituminous primer @ 0.40 Kg/Sqm confirming to IS-3384 and lying APP based polymeric membrane not less than 3mm thick, weighing not less than 3.5 Kg/sqm, reinforced with polyeter non woven fabric (weighing not less than 150gms/sqm) shall only be used. It shall be laid by torch apllication. Side over laps shall be 75mm and the end lap shall be 100mm and all over laps and joints shall be sealed by torch application.

M&L preparation of APP based polymeric surface and applying two coat of aluminium paint all as specified and as directed.

Supply only integral waterproofing compound ISI marked.

Taking down cement plaster or cement lime plaster/ tiles, stone of any descrption on PCC/ stone surface/ brick surfaces of wall or ceiling including raking outs joint hacking for key scrubbing down with water etc

M & L rendering 10mm thick on concrete surfaces on ceiling in CM (1:3) finished even and smooth without using extra cement.

M & L rendering 15mm thick on stone masonary surfaces or surface other than fair faces of brick work on wall in CM (1:6) finished even and smooth without using extra cement.

M/L rendering 15 mm thick on fair faces of brick surfaces in CM(1:6) finished even and smooth with out using extra cement

M & L Preparing new plastered surfaces and applying three coats of white wash on ceiling

M & L Preparing new plastered or unplastered surfaces and applying two coats of cement base paint on walls

M & L Preparing new plastered surfaces and applying two coats of oil bound distemper over priming plastered surfaces with alkali resistant priming paint

M&L Preparing old decorated surface of walls including brooming down & cleaning the surfaces and applying one coat of cement base paint of any tint all as specified.

M&L preparing old decorated surface of walls including brooming down and cleaning the surfaces and applying one coat of distemper (Oil emulsion) of approved tint all as directed.

M&L Preparing old decorated surface and applying one coat of white wash on ceiling surface.

Demolition of stone or brick masonry built in cement mortar or cement lime mortar incl all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles

M&L for brick work with sub-class 'B' bricks, straight or curved on plan exc 6m mean radius built in In cement mortar 1:6

Demolition of stone slab and tiles of any description or thickness laid dry or laid dry and pointed as in floors, approans etc.

M & L 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregates in sub base complete

M & L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and no pigment laid over 25mm thick sand cushion layer complete

M & L chequred cement concrete tiles 25cmx25cmx22mm thick with grey cement and pigment in floors etc set jointed and pointed in neat cement slurry over and incl 15mm thick screed in CM (1:6) all as approved and directed

M & L PCC blocks or slabs 150 mm thick (1:2:4) mix type B-1 using 20 mm graded aggregated with plain or interlocking joints as directed complete in walls setting in CM (1:6).

M&L make good the edge of chajja/facia in proper shape i.e plum with rich cement mortar 1:2 and providing 10mm thick plaster in CM 1:4 including matching the surface with existing finished complete all as directed.

Dismentaling of floor hearth or wall tiling incl cement mortar bedding( but not backing) and rubbishof the premises

M & L coloured non skid joint free ceramic tiles 300x300x7 to 8mm thick in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete all as approved and directed

M & L glazed coloured ceramic tiles 300x200x7/300x450x7 to 8 mm thick, on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick screed bed in CM 1:4 complet all as approved and directed

M & L glazed coloured joint free ceramic tiles 400x400x7mm to 8 mm thick, as in floor set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed in CM 1:6.

Dismantling old unserviceable RCC / PVC water tank capacity exc 250 and not exc 500 ltrs & removal from site complete all as directed

Dismantling old unserviceable RCC / PVC water tank capacity exc 500 and not exc 1000 ltrs & removal from site complete all as directed

S&F 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I.

S&F 1000 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I.

Taking up or down steel water tubing and connections fixed in walls, ceiling, floors etc of 15mm bore size

Taking up or down steel water tubing and connections fixed in walls, ceiling, floors etc of 20mm bore size

S & F GI tubing medium grade with all fitting and fixed to walls and ceiling or laid in floor complete of 15mm bore size

S & F GI tubing medium grade with all fitting and fixed to walls and ceiling or laid in floor complete of 20mm bore size

S&F in repair PVC valveless, syphonic action type, flushing cistern, low level,10 ltr capacity, white, with intel, ball valve, float and handle including brackets,flushing pipe complete all as specified & directed.Make Commander Slim Line/Cera/M/S EID Parry (India) Ltd

S & F in repair PVC connections 450mm long suitable for 15mm bore GI pipe including PTMT nuts on both sides complete

S & F in repair vitreous china squatting pan 'Orissa' pattern water closet white size 580mm x 440mm with integral foot rest and 'P' or 'S' trap (excluding flushing cistern and flush pipe) complete including connection to trap and flushing pipe antisyphonage pipe etc Make- Hindware, CERA, Parryware

S & F in repair vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white incl providing and fixing plugs, securing urinal to plugs with and including 60mm long brass screws with grating and union for discharge pipe including PVC waste pipe complete, Make- Hindware, CERA, Parryware

S & F in repair vitreous china wash basin, white flat back size 550 x 400 mm excluding taps, waste chain and plug and porcelain stopper but including brackets, CP coupling , PVC waste pipe complete. Hindware, CERA, Parryware

Providing and fixing in repair suspended false ceiling make Armstong ORCAL extra microperforation size of 600 x 600 x 15 mm Ceiling Tiles over suspension metal system (MICRO LOOK) designer grid (15 mm grid 8mm return) SILHOUETTE X L 15 MM (NOMINAL) of Armstorng make complete or equivalent brand of make as approved by GE including necessary hanging system arrangement which is required to be made from existing rafter and purlins of trussed roof of building all as directed by Engineer-in-Charge.

M & L double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed

S&F Door closer aluminium anodized extrudedsection body hydraulically regulated designation No-3 universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg as in repairs.

S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m and above including necessary joining cleats, glazing clips, rubber neoprene packing, handle 2 nos in each door, hinges, anodised aluminium snap beading screws etc. as in repairs complete all as specified.

M&L for 09 mm thick prelaminated particle board interior grade, prelaminated both side with decorative choice lamination fixed with screw .

S&F sheet glass 5.5 mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane.

S & F in repairs 15mm bore bib tap fancy type chromium plated cost copper alloy with crutch or butter fly handle screwed down for iron pipe and fixed complete.

S&F as in repair fancy type pillar tap cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore.

M & L machine cut kota stone slab flooring 20-25mm thick,size of kota stone 400x400 mm over and including cement screed base 15mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M & L machine cut kota stone slab on vertical surface of wall, riser etc 20 to 25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 10 mm thick cement plaster in CM 1:4

M & L Dholpur stone work 16 to 18mm thick polished with machine cut edges in cladding in pillars, windows cill and like each stone size not exc 0.25sqm making V groove at top and bottom of stone and drilling hole for and incl fastener, polishing, rubbing & incl silicon treatment fixed with set over and incl 10mm thick cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with stone shade.

M & L for 16mm to 18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete

S&F as in repair 15mm bore stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

S&F as in repair 20mm bore stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

S&F as in repairs stainless steel grating doom 100mm dia all as directed.

S & F in repair brass chromium plated shower rose 125mm size with swivel joint suitable for fixing with 15 mm bore pipe ncluding shower arm 15mm bore size with bend of 45 degree with flange

S & F in repair brass chromium plated tubular towel rail 20mm dia, D type, 60cm long between flanges

S&F as in repair cromium plated brass toilet paper roll holder with flap complete as per Jaquar Cat Part No AKP-35753P or equivalent as approved by GE

S&F as in repair cromium plated brass hand shower (health faucet) with 8mm dia 1.00m long flexible tube and wall hook as per Jaquar cat Part No ALD-573 or equivalent as approved by GE

S&F Soap dish, Vitreous China white, approximate size 160x160x90mm

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm

S&F in repair Corner Glass shelf 300 mm make Gesign cat part No GS 300 fixed.

S&F in repair two way Bib taps fancy type cromium plated long body cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule,long body,15 mm make cera Cat Part No FWC 9100 A or equivalent as approved by GE

Supply & fix EWC seat cover colourd match to WC

S&F as in repair Chromium plated jet spray suitable for EWC, complete all as specified

S&F in repair15 mm bore CP Angle valve cast copper alloy screwed down high pressure with capastan head, screwed both ends for iron pipe or for unions. Make - Jaquar, Hindware or equivalent as approved by GE

M&L Shelf of PTMT fixed with and including Chromium plated brass screws and wooden / platic cleats (minimum weight 300gms)

S&F Ball PTMT valve, high pressure, with polythene float and flynut complete, screwed for iron pipe 20mm bore or brass ferrule and fixed complete all as specified and as directed.

S&F as in repair cast iron floor trap of 75mm bore, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified & as directed.

S & F in repair 110mm bore PVC soil, waste and rainwater (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including necessary mild steel flat iron clamps at joints for fixing with wall complete incl taking down old unserviceable pipes

S&F plain sheet glass 5.5 mm thick ordinary quality fixed with and incl rubber gasket area not exc 0.5 sqm in each pane complete to aluminium door/window or partition wall.

M&L for running welding to mild steel hinges coming out from steel frame( rates to be included for filling material and work place is segregated)

S & F brass mortice lock verticle type size 65mm, 4 levers with escutcheon plates and two keys fixed in aluminium frame.

S&F in repair viterous China table top wash hand basin white size 160mm x 495mm x 365mm as per Jaquar Cat Part SLS-WHT-0558 or equivalent as approved by GE

S&F in repair viterous china extended wall hung WC white bowl size 775mmx360mmx660mm including dual flush fitting and cisturn and including soft close seat cover as per Jaquar Cat Part No CNS-WHT -WS-11, CNS-WHT-WCF-1( Dual flush fittigns), CHS-WHT-CSO-1 (Cistern ), CNS-WHT-WCS-1 (Soft close seat cover) or equivalent as approved by GE

S&F in repair viterious china urinals with sensor size 710mm x 485mm x 300mm as per Jaquar cat part No URS-WHT-0704 and sensor cat part No SNR-51097 (Sensotronic sensor flushing valve for urinal with complete kit (suitable for urinal URS-WHT-704) or equivalent as approved by GE

S&F 6mm thick clear toughened glass for aluminium doors and windows.

Supply & Fix froasted glass 6mm thick for windows and urinal partition.

M & L for applying one coat of synthetic enamel paint over old painted steel and iron surfaces and prefab board of sheltors of any description over 10 cm width or girth including surfaces preparation.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) fixed., Make : ELBA Cat Part No-P-18 Trap 92037 or equivalent in Hindware as approved by GE

Schedule of Credit (tentative)

M/S Mohan Lal Gupta

J.J.ENGINEERING

UNIVERSAL INFRAPROJECT PVT LTD

Smita Constructions